854. Using a 4” Round Rib to Throw a Perfect Curved Noodle Bowl with Hsin-Chuen Lin 林新春 麵碗拉坯示範

Hsinchuen Lin
205 followers
113 Video Views·May 8, 2025
To see or buy my finished work and pottery tools, please visit my Online shops:
https://sawfish-endive-kgks.squarespace.com/shop
http://www.etsy.com/shop/hsinchuen
http://www.etsy.com/shop/hsinceramics
http://www.etsy.com/shop/hsintools
To watch more of my YouTube videos, please visit my channel:
http://www.youtube.com/@hsinchuen
To learn more information, please visit my Website:
www.mypots.net
Instagram: @hsinchuenlin
Facebook page: Hsin-Chuen Lin Ceramics
Pinterest: @hsinchuen6518
Today I'm going to use this round rib to draw a nicely curved inside a bowl. It's more important
when you are making a bowl make sure the inside is nice and smooth so that you don't need to trim
the inside. And outside even if it's uneven you can always remove it easily but the inside is
harder to trim. So use this rib to make the inside nicely curved.
And this is about two pounds of clay and I am drawing on my bed system so when I'm done
I can just lift it up without messing up the bowl.
And this is my bed system that I designed and the main idea of throwing a piece on the bed is that
you don't need to touch the part when you lift it from the wheel head. That's what the effects are
all about. The bed system is to save the space because most of the beds there are made about
like 12 inches or even 14 inches wide and if you're making smaller things your piece is sitting
on the bed for drying and taking up a lot of space so this bed system is serving the purpose
that it takes smaller area on the shelving space so you can put many many pieces on it.
The clay is centered and then open. I tend to open all the way till the right thickness.
I would say my bowl is somewhere around a half an inch and three quarter inch depending on how
tall you want to leave your foot and I like my foot to be tall so I usually leave about
somewhere between three quarters and a half of inch and once I reach the right thickness
and then I can gradually pick up the clay from there and pour it up. And some people do have
a hard time to get this part nicely curved to start with so if you have a struggle with that
you can actually once you open it up you can get use the rib and then use the rib to squeeze it
so you have a nicely curved to start with. You push that and this is very nice curve here so
when you squeeze it you already have a nice curve and then you just follow that curve
and then gradually lift it up and then your hand like my thumb and the left finger
go in there and pinch that and this hand the right hand supporting the thumb and then the rest
my my wrist right here on the splash pan and pinch and slowly but consistently
and go straight up first instead of a pull it wider it's easier to make it wider but it's
harder to move it up so usually you might want to lift your wall up slightly and then
gradually open it wider and compress the rib and then we're going to do another pull and using the
pinch from there so i was using the my right hand to brace it but now i want to be able to see
quick what my thumb my left thumb is doing so i just use my index my right index finger there and
just brace the thumb my left thumb and then pinch and slowly but surely
pull it up and compress the rib
right and then i'm recycling my slip pull it up from my fingertips and then just coat it on the
surface coat it on the surface right and still i have a lot of clay here right there i coated this
the people call it skirt of clay and if you leave it untouched you are going to turn it up later
but if you don't want to leave it there actually just squeeze it in using the finger to squeeze
it toward the center and move the clay toward the center what i do is put my right hand here
and using this fingertip and just pinch it pinch so i'm squeezing the clay from the corner in here
so that i will have more clay here and i will be able to move it up even taller use the most of
the clay make sure when you are touching the surface the surface is slippery so make sure you
either use a slip of some water to lubricate it now my thumb is too short but i still want to do
the same kind of a pinch so what i do is put my right thumb to be side by side with my left thumb
and then kind of extend it so this is the way i'm pinch pinch the clay and then lift it
start from here so squeeze the clay in and then pinch both ends pinch in the clay and slowly
slowly move it up
now you see that i slightly open up the ring so the ball is getting wider
almost the very final stage i'm just reshaping and put my finger outside and
the fingers inside and slowly adjust the shape of the curve put it right here
and the inside finger is pushing it down and outside and slightly support it
and you want to push out further so the rim is wider i'm going to clear out wider
okay so that is almost the shape of the ball and then i usually use the rip to get rid of all the
slip so push that the rip against the side of the the wall and then the inside hand
inside hand slightly push down the wall against the rim is just supporting
not much pressure outside but your inside hand is doing the job to
get the curve nicer and also removing the slip
i don't have a camera on top so the inside is slightly uneven because
i told you that at the beginning of the video the inside curve is more important than the outside so
i'm going to use to bring back my round rib okay i call this round rib this is the size is four
inches okay four inches of round rib and just go dip in there and then compress from the center
point toward the right okay turn your left is against the direction of the wheel
but just slightly from the center slightly push and slightly rotate it
so that you are compressing the inner wall especially the bottom
slightly compress it on the inner bottom especially the corner
and you can slightly tilt it tilt it instead of holding it like 90 degrees slightly tilt it
so you will have a gradual curve this is a sharper curve but if you tilt it you will have a gradual
curve go in there dip it there and then slightly tilt it so it's more horizontal
and then i slightly rotate the rib this is the wrong rib so any direction is forming the same
curve and then you can gradually push out and pull it all the way to the rib
so we'll do one more time slightly tilt it so
the curve follows and then slightly rotate it
okay so that is how i compress in the inner part of the bowl and then use the chamois to
compress the rim if you don't want the rim to be so thick looking some people do not have a
thicker rim so it's more of a functional use that if you bump it the thicker rim is stronger
but the look is looks the whole piece looks heavier when you have a thicker
thicker rim if you want the thin looking you can squeeze the rim
like slightly squeezing the rim so the edge is thinner and the feeling of
bowl is lighter because the rim is suggesting that the bowl is thin because the rim is thin
this round rib is made of wood so there's a little bit of wood texture or wood grain in it
and if you don't want the texture to be shown actually if you are going to glaze it the glaze
will probably cover it anyway so it doesn't matter but if you're worried about that the texture from
the wood is showing up you can use the rib to smooth it out what i do is kind of bending the rib
and start from the center and slowly move up using that to smooth out the inner part
make sure when you're using this rib a little bit away from the very center point if you
cross over the center point you're going to gouge it and that the very center is not going to look
you can just use the thumb and compress in the very center and then probably quarter inch
away from the center and you use the rib to compress it and after that
smooth out the rim so that is the two pound bowl on the very tall foot and then i will use my
number 17 it's just been the wheel clockwise to use number 18 okay so this let me clean it up so
you can see that tool okay this tool so how do you use this tool it's fairly easy so this part
here is straight part now you hold in here and you can push that this is not very sharp here
this part and push against the back and then slowly go in there while the wheel is spinning
go in there go in there and then you hold it steady and you can remove the clay from the corner
once you trim the clay make sure you remove from the remove from tool otherwise the clay
is gonna stick on it so trim a little bit and then you remove it
you can also put it on the side way too side way so using this part here is slightly sharper
so this tool if you see it closer here i sharpened a little bit not too sharp because you're going to
put your hand there so i intentionally grinded it but not too sharp so it's not cutting your
fingers and this part here is not sharp at all because you are going to use it to against on
the bed so it doesn't need to be sharp and then little see that there is a little run part here
is that in case if you don't want to trim the foot you can put a little style on the foot
looks like it looks like a finished piece
okay so this is this little curve about if you don't want to trim the foot you can leave it
like that right so i could get the most clay out of the corner this curve
and then you will have less clay to trim off later
or we can leave it without needed to trim if you don't want to trim the foot
all right so i told you that the best system
but when you're done you just pick it up without even touch the clay
that's the throwing demo and i like to show you after using this round rib
four inch four inches round rib to compress the inner part
what it looks like on the inside of the bowl so let me cut it open
all right so this is the inside look like see the curve because i'm using this root to
compress it it's slightly tilted and tilted so from the center point and then you gradually
rotate it rotate it and then you can move it up so the inside of the curve is very nice and smooth
you don't need to trim the inside just the outside and you can see the outside is not
very smooth and you can probably remove a little bit more clay on the outer part so to make it
nice and smooth right so that is the round rib look like when you are compressing on the inner
part it's slumping a little bit it's supposed to be like this okay i hope this demonstration
help and the rib bits are available on my xsquarespace and etsy btsy shop i have three
sizes so depending on how big your bowl is three four and five inches this is even nicer for
compressing for making a plate a larger platter three sizes right so i hope this demonstration
help and i will see you on my next video
