Hi Guys, today I want to show you how to create a ladder bezel to set a flat bed cabochon. This is an easy technique, great for beginners who want to learn how to set a focal stone. I will also show you how to make a bail and create a coil setting for an accent stone. (you can use a drilled bead instead if you are not comfortable with setting undrilled stones yet). :) Have fun!
We're an artist community (wire and metals) for everyone to share their ideas, post their art, tutorials/events & workshops or ask questions. We are a great buch of artists and have a lot of fun being creative together with challenges and fun projects to create every month.
To see what workshops I am currently running or to get full kits and or loose gemstones, frames for some of my tutorials, square/half round wire & more tutorials visit my web shop:
- 0.4 mm (26 ga) wire - 0.8 mm (20 ga) square wire
- 30 mm marquise cab but any shape can work - 6 mm flat-back cabochon - 2 mm beads - 2.5 mm beads - 3 mm beads - 4 mm beads - 5 mm beads
Tools:
- Fine tipped flush cutters - Chain nose pliers - Round nose pliers - Flat nose pliers - Polishing materials
Hi guys, this is Nadia from E-BobbyCrafts and in this video
I want to show you how to create a really simple leather bezel to wrap a flatbed cabochon.
If you haven't already, hit the subscribe button because I put new stuff on a regular basis.
I quite often make kits and PDF tutorials for the videos
I put up on here and I'll pop a link in the description below and I also have all sorts of gemstones,
square and half on wire, some beads and all sorts of other goodies on my website.
So take a gander over and see if there's anything you might see.
Last but not least, come and join us in our Wire Wrappers and Metalsmiths group on Facebook. I'll also pop a link below.
Right, let's get started.
Right, to get started we need to check the height of our stone.
We're going to create a bezel to fit around the side of the stone. This one is quite flat
so the bezel itself doesn't need to be so wide.
So we're just going to line up the stone and it only needs to be big enough so that the
bottom wire fits
underneath the stone and then the wire that goes on top kind of sits over the curvature to hold the stone in place roughly
about like that. So if you are
new to wrapping and you haven't done this before you have a little trick that you can make use of which is
grab a bead which the half width of which is approximately, it doesn't need to be exact, about the same
sort of width that you want
the bezel to be, roughly like that.
And that's good enough. It doesn't need to be accurate. I usually use, this is roughly about five centimetres, five millimetres
I would say, tall, maybe eight and the stone is a ten millimetre bead if I'm not mistaken.
So you can work that out and you can use whatever you have accessible to you at the time.
So we're going to start, we're going to take off the bead for now
and then we're going to take our first base wire and we're going to attach our weaving wire
to the base and
I'm going to leave roughly about a third of the base wire point to the left and only a very short tail of
my weaving wire as well. So we're going to be wrapping it five times
around the base wire.
And
we're going to leave the length, the longer length rather of the weaving wire pointing to the right because we're going to be zigzagging back
and forth with that and that's what it looks like so far. So next we need to travel up.
So we're going to take the bead that we have taken off just now, slide it back on and for this I'm actually using
square wire, but round wire actually works quite well as well
and probably better for a setting like that, but I like the square for detail so
I like to use it more than round.
So once we are happy with the initial setting we take the
next wire and we place it on top of the bead and we're going to travel across. We're going to put our wire in between,
come up, push it against the weave and then we're going to come up on top
and the bead when you're coming up on top will actually
stop
the wire from pulling. If you don't have the bead there what can happen is
the wire gets pulled and then you end up doing this
so the bezel will shrink in size and that's obviously not what you want. So the bead will prevent that from happening. So we're going to
then come up to the top
and we're going to wrap
five times around the top, but the number of times you wrap
is up to you. The more wraps obviously the bigger
the gap
in between the rungs of the leather, I like to call it the lather, whatever you want to call it.
You want to make sure if you want you can take the bead off each time
and slide it onto the top wire and then that will help you push
the weave and make it tight. It depends, you can have the wire on the top or the bottom, doesn't really matter, whichever you prefer.
And then we're going to just come back to the bottom
and we're going to do five wraps
around
the base.
Okay, obviously keep them pushed together and then we're going to come back up the top and the bead
as you wrap will travel with you. So don't worry too much about taking it on or off, it'll slide as you go along.
It will just prevent
the two wires from creeping too close to each other
to keep that gap the same all the way along like that.
And you will notice that
it grows apart if
you will notice it grows apart if you hold the wires too close at the end like this.
You can see that this will cause them to spread. So you need to make sure when doing this wrap that
you keep these straight at the back as well.
Straighten these out and every so often
come back in and just straighten these back out and that will help you keep things neat as well.
And come back to
three
four
five
and then obviously push the weaves together. You can use a pair of pliers for that.
And then just keep traveling back and forth in between the top and the bottom base wire
until you have enough of a length to
fit around your stone. So obviously the way you can measure this is cut a piece of wire
and
measure the outside of your stone
so that you can make sure that you don't go too long or too short because you don't want to bend it
back and forth all the time to check. So the best way to measure that is just to
take a piece of wire and measure the circumference of your stone.
Right, so we're going to keep doing this until we've got
long enough lengths to go around the stone.
All right, I still got some more to do but you can see here that at the beginning
I didn't pay enough attention and
the wires were too close together. So if that happens, don't worry, you can just undo that.
Unravel the wire until it looks about right and then you can either just re-
create some more of the leather weave so you can just leave it depending on how much of the weave you actually need.
But yeah, this happens sometimes so don't worry about it. So just undo it and then redo it.
All right, so I think I've got a long enough length so it would have actually been easier if I had marked
the wire. So if you take the measurement around your capuchon, then take the piece of wire that you've measured
around the circumference of the stone and then maybe mark your wires so that you start in the right position.
I mean, I'd always go off the cuff so
it wouldn't hurt sometimes to actually
measure properly.
Anyway, all right. So the problem with this leather weave is that if you look on the side here, I don't know if you can see that
is that
the wires
kind of stick up which will not
fit around the stone nicely. So what I tend to do is
I come in here
and I kind of
flatten
these wires down a little bit on the side here so that
this will be the inside and that is where the stone will sit. So I do this on each side
and I kind of bend the wire in a little bit and that kind of creates
a little groove for the stone to sit in. I don't know if you can see that very well.
But you get the gist. So basically just bend these wires in until they are all sitting flat so that you have
one side of the of the leather weave that is
flat and the other is normal from the outside.
Okay, so I've just finished making the bezel and I've flattened all the wires.
You can see there's a difference between the inside. The wires are flattened out against the back
and then if you flip it over you can see the wires actually still run across.
So you need to make sure that you bend in the right side. So what I'm going to do next is find the midpoint.
I actually really should measure it, but I'm just going to go
do it by eye.
Kind of get
roughly the midpoint
bend it in
like so.
You can measure it
to get the right
length on each side, but you can also adjust it at a later stage.
So it's roughly the same. You can always add some more. What I'm going to do next is
take the stone. We're going to
wrap this round. I'm going to fit it inside
and then we're just going to lay
this
round stone like that and press it in place.
So you can always adjust. You can see that the bezel is just
wide enough to fit over the curvature of the stone and just wide enough so that the actual wire
at the bottom kind of holds it in place
like so. That's what it looks like
on the side
and on the top.
All right, so I had to add in a couple of sets on each side because I was getting a bit short.
So if that happens, you can just take a piece of weaving wire and just kind of add it in where you left off.
And now that they're all lined up, what we're going to do is we're going to bend
these wires
at a 90 degree angle so that they kind of line up. You can push this down a bit
to weave if they're a little bit long. You want to make sure that
they are
holding the stone in. So we're going to do the same on the back
and that will meet up. So we're going to do next obviously the same on the back.
This thing has been pretty mangled so we can cut that off. We won't be needing that anymore. So just cut it off
and I've undone some of the weaves
because there were too many.
So you just want to make sure that they line up just at the top of the stone
and now we're going to join all of these together. So the way I'm going to do this is by wrapping around
each of these four wires once. So I'm going to come in here
wrap it around
the first one and this will join these two
together at the back.
Then I'm moving to the front.
You don't need to pull that much because obviously there's a little bit of a gap.
Let's open this up a bit.
Straighten these out and we're going to wrap around
the front.
Come around to the other side. I really wanted to go around it once but I've gone around it twice.
And now you want to make sure that they are as close together as possible.
I'm going to wrap around it
once
and now we're going to travel around each
of these wires
once. So now we're going to the back
and this is just to bind them together. So we're not going to be doing much else with that.
I'm just going to go around each of these wires one more time
just to bind them. You can see I'm doing just one loop around each, not two.
It's just to keep the
keep the weave from growing up too much.
There we go.
And now back at the front.
There we go.
And this just kind of binds them all
together. You can push the weaves down
with a pair of pliers
and that will close off the front and the back and it will stop the bezel from
from opening up and
everything falling out.
That's what it looks like at the moment.
Okay, so now
we have these all attached and we're going to create a bell at the front. So just a very simple figure of eight bells.
We're going to shape
these, bend these apart and we're going to
bring these in like that. You can make this large or small depending on how big the bell you wanted.
Obviously the wider the marquee shape is
the
wider the bell obviously, so you can make it as small or as big as you want.
Kind of bend it until you're quite happy with the shape. I actually like it to be a little bit more rounded
the base
of the shape to it and then you can kind of fix it. I prefer when it's not quite so straight.
There we go. And once you're happy with the shape
and I mean again, you can mark this with a marker pen
if you want to.
Just make sure you don't bend it out of shape.
But yeah, you can mark it with a marker pen and then when you're happy with the symmetry
you can then come in and bend
the wire straight.
And you can always adjust
the shape later.
Start with the initial sort of
shape, bend it in place and then kind of hold it together and see if it fits. And that's roughly
okay symmetrical so you can always adjust it.
And then the next step is to do the weaving. So a simple figure of eight
weave. That's what it looks like at the moment.
So next we're just going to weave the bell. So it's a really simple figure of eight weave.
So we're going to take the weaving wire and we're going to
attach it. First of all, if it's not at the front bring it to the front.
It doesn't matter which direction you start. So I'm going to come across. I'm going now from left to right.
So I'm wrapping around the right hand wire once.
Bring it down and then I'm going to go across and I'm going
behind.
And then I'm wrapping
behind
and around
the wire on the left and then I'm crossing over again and it's kind of like a figure of eight.
So you're weaving
in a figure of eight kind of fashion.
And it's better to have
the wrap go around
the wire at least once for a full revolution because if there isn't a full revolution
the wire has got nothing to grip on which will later, especially when you are coming to this part here,
give you a bit of a problem because
the weave will be loose and it won't hold nicely. So it's always best when you're doing these kind of bells
and these kind of weaves for these bells to do one full revolution
when you're going around.
So just keep going
with this until you
get to the top and this is quite an easy weave. Now as I explained
many times before when you get to the midpoint the wire will start to slip and slide.
So you kind of hold your finger over the weave
and prevent it from slipping, but I'll demonstrate it when I get there.
I'm just going to get to the midpoint and then I'm going to show you how
to prevent the wires from slipping.
Right, so weaving is starting to get a bit tricky. You can see that, you know, when you're weaving
it wants to slide up. So the way I prevent it from happening is when I come across to the other side
I hold the weave with my finger or fingernail
and then I wrap
around the other side
and gently and be careful not to pull too hard.
Otherwise, you're going to close the gap when the weave's at the top or the bell's going to cross over like that.
You want to try and avoid that. So
when you create the loop just kind of pull it tight around it, push the weave down
like that and then you can move across. Make sure you hold it in place
so that it doesn't slip and slide and then wrap it around
the other side
push it down, bring it across
and then before you weave
put your finger over it
and stop it from sliding up.
I mean, I'm not really good at these types of bells
making them. They always look a bit messy when I make them, but this is how I keep them.
Maybe there's a different way to keep this from sliding up, but
this is how I've done it. So
you can try and see if that works for you. Otherwise, you can try
something else. Maybe a different method will work much better. Who knows?
Right, so that's that. So we're just going to get to the top and then we're going to work away the bell.
All right, so we're done. So we're going to
bend this forward
like that
and then we're going to bring
these around
the legs of this bell
and come around the front
and just bend them up ever so slightly. You can use a tool for that
but you don't actually bend the weave.
Like that.
Actually, I've just left them
just a very small kind of bezel. You can adjust the shape of it once
you've brought it down like that.
That's kind of what it looks like at the moment.
So we're just going to bring the legs and we're going to take one of these and wrap it around the front.
Okay, so I'm just going to push this in. You can adjust the shape of the bell at a later stage.
So what I'm going to do is I'm going to wrap
each of these
around
and then
bring it back
to the side here
and do the same. And this is just tying off the bell.
You can adjust this
at a later stage
and just squeeze it down so that it looks as tidy as possible.
That's what it looks like at the moment.
All right, so now I'm going to bring this bottom wire up. I want to line it up with
the wire at the top. So I'm just going to bend it up
and then bring it at an angle
like so
so that
these two kind of line up in parallel
like that. I'm going to be weaving them
together
like that.
Okay, so line them up. So now I'm going to create a little stone setting
front. So I'm going to start off by
creating the base
of a little flatbed stone that I want to put in there. So you want to make this nice and round
so it sits. You can do this with a diamond facet cut as well.
I've got these little garnets that I want to see if I can put them, maybe use a smaller one.
Make this a little bit bigger
like that
and just rotate.
That's the setting.
Take the flat back
and we're just going to
rotate
the wire
around
the flat back. You just want to make sure that
the square wire stays as flat as possible as well. So it always has a tendency to want to
kind of sit up on edge
kind of make sure it stays flat and you want it to
kind of
seat itself around the stone
like so and it goes over the sort of curvature of the flat back like that
and then it will come down. So you want to make sure it's nice and central as well.
Bring it down a little bit more
and then
I'm just going to bring it in. So because there is a little bit of a step
we need to bring this down a little bit so it's back in line with the
this wire here.
So I'm just going to
bend it down a little bit, create like a step.
You can find the right grip
and bring it back up
and this will bring the wire back
roughly on the same level
and make sure that the stone is secure obviously.
And have the wire run
alongside it.
So we've got them running alongside. So we've got some wire here. So we're going to be attaching this.
We're going to use one length
to do some weaving
with these two base wires here and we're going to use the other length
to create
a short weave here. So you don't need too long. I've got about a meter and a half here just now.
We'll probably won't be using all of that. So we'll adjust that later when I put the details in the tutorial.
So what we're going to do
is create
a
figure of eight weave
just to attach these together
like so.
Just want to make sure that that stone
that we have to set
is going to be nice and secure
and won't fall out of the setting.
We've got
this attached. You can push the weave in
a little bit more
and then we're going to feed this wire
through.
You may need to make some space
and just feed it through one of the rungs.
You need to lift this up a little bit and this will kind of attach
the stone setting to the rung if you so will
and prevent it further from slipping.
So that's
kind of what it looks like at the moment. So we've woven here to keep these two wires braced together
and then we're now attaching it through one of the rungs like that.
Through
and that will attach and then we're just going to
do a couple of more wraps
around
these wires here
just to secure.
It's going to push this down a bit more
like that.
Secure.
So everything is now nice and tight.
So now
I can do something here with the detail of these wires here. I can run them alongside and see what we're going to do with those.
Then obviously we're going to use the remainder of this wire to do something with
these base wires here.
Right, so next we're going to
shape
because we don't have much length left. You could add a little bit extra length to the wire. Maybe I'll just add some to the
initial lengths that I give you so that you could make more detail with it. So I've gone a bit short
and I'm going to
swirl in the end. What I like to do is squeeze the end.
This slightly works better when you have thicker
roundness pliers to begin with.
I'm just going to roll this in.
And when you're doing the little swirls the finer roundness pliers actually work much better
because you get
better grip. So once it goes small like that
it's actually difficult to shape it. Then you can just bring in
and manually bend
the chain nose pliers. The sort of swirling doesn't work because you want
you want the swirls, or I anyway, want the swirls to be as round as I can have them.
Turn with that
and roll them in. And you also want them to be closed because if they're open
they have a tendency to hook on things.
So you want to make sure that the swirls are closed
like that. Now we've got
this wire here. So I think I'll leave this for now and I'm going to bring this wire around
to add a little bit of detail to the side as well.
Right, so what I'm going to do next is flip this over and we're going to be weaving
at the back here. So what we're going to do is just create some simple two by fives.
So I'm just going to, or three by fives rather, three by twos.
And as I get this right, we're going to go three times
around the bottom wire. It's always a little bit more tricky with square wire because there's a lot more grip.
With round wire everything slides.
And twice around both
and then three times around the bottom
like that.
And then also just press in the weave down and then we're just going to continue with that pattern.
I think about
maybe six or eight revolutions will be enough. I'm not too sure yet.
Right, so that's what it looks like.
We're just going to continue with this weave for a little while until we've got enough to bring the wire around the front.
Okay, so we've done, I've done about one, two, three, four, five, six, seven, eight, nine, ten, eleven, twelve, thirteen, fourteen, fifteen
sets of this weave. So now what we're going to do
is
kind of drape it around the front. We might need to even add some more.
I'm not sure.
Like that.
And I think we'll need to add a few more.
So we're going to
just add enough until we have
enough weaves until we reach
this end here. We're going to tie these together. So we're going to do three
and then two
one
two
three.
See, I really struggle to get the weaves tight with the square wire. So I have to come in with my pliers periodically and
tighten everything up
because the square wire has so much grip because of the
corners, obviously, that the wire, the round wire doesn't really slide along
as nicely as it does on round wire.
Three.
So every now and then push the weaves in. Let's see if that's enough now.
A little bit more, I think.
We want it to sit kind of sideways. Obviously, we want to make this look nice and pretty, give it a nice little swell.
But we want these to sit together like that because we're going to now
tie these two together
and do something with those. So I'm going to
arrange these a bit better and then make sure that they fit together and then we're going to
finish up.
I've done about 18 in total now, but obviously you can change it if you don't like it that long and
you can
make it shorter and can attach it further up. I decided I wanted to create a little swirl with this wire.
That's why I brought it and left it a bit longer. So what I'm going to do now is just
bring it around. It's a little bit short, so it's harder to
manipulate. It's much easier to create swirls when you've got
a longer length. What you want to do is put your thumb over where
you want that swirl to go.
Then ever so gently you can then also use
your pliers
to help you shape it and all the while just try
not to squeeze too hard
or press so that doesn't damage the wires. Just kind of decide where you want it to go.
Just bring it a bit further up.
You kind of want to bring it back in line
with this wire here
because now we're going to be attaching,
we're going to be tying
this loop
to this wire here.
Like that.
All right, so now that these are all lined up, what we're going to do is take this wire,
I'm going to bring it up and I'm going to wrap it once around the middle wire
like so
and then bring it across, a little bit fiddly at this stage, then wrap it once around
the upper wire
and then come back down
and then push the weaves together
so that they are
nice and tidy.
And now we're going to do some just two by fives.
Just be gentle with it because at the moment it's
three by fives. I always
call them something else.
Push the weave in
and that'll do. So just one set because we want to have enough length
to do something with this wire. If we tie it all up
there's not going to be much left to do anything with because it's a little bit short. So I'm only going to do one set
and then I'm going to push this in a little bit more. That's what it looks like at the moment.
Okay, so now I'm going to be bending the middle wire.
There we go.
Now I'm going to wrap the middle wire
around
like that. So now we're going to be twisting this one into a swirl.
Squeeze the ends
and roll it in
and attaching it to the frame somewhere here on the side.
Okay, so now I'm going to
bind these two together. So I'm just going to bring this wire across here
and I'm just going to
wrap it once around
each
and kind of bind them together.
Lift this up a little bit to give you better access.
So I'm just doing a figure of eight weave. So just
wrap here
and the wires are loose like that. It can be a little bit tricky to do the weaving
because obviously there's nothing that
gives you purchase to hold them in place.
And obviously the square wire doesn't want to slide. It doesn't want to slide along the wire so
that's
enough to hold them together.
All right, so attach this. We're going to bring this wire around and create a swirl
at the bottom.
So again, squeeze the tip. If your wire was a little bit longer than mine, you can just trim it off and
line it so it looks like that. I'm just going to swirl. If you had longer wire
you could set
some gemstones like a coil setting like we did on top here.
Sometimes I like to do that when I have enough wire lengths, but I didn't cut enough base wire to do this
for this one.
I'm just going to squeeze the tip a little bit and then I'm going to roll this in
like that
and just kind of shape it around
the existing
loop like that.
You can tie these together as well. I think we're going to continue with the weave a little bit more
so that we can then tie these together.
I'm going to attach these two swirls to the frame here at the bottom.
Okay, so all I've done here you can see I've woven all the way to the bottom and all this is is basically a figure
of eight weaves. So I'm going to take the weaving wire
and bring this up if necessary
and go around one wire and I don't
loop it one full revolution
but rather I go back and forth
and I go the other way, other wire and I keep looping
it back and forth and you can do this until
you have
the long enough length that you're happy with. I mean, this is just I like the look of this
so I kept going until I went nearly to the bottom. You can expand it a little bit
to the end, but I think I might just add a bead there. I'm not sure yet.
But you can do that if you want. So that's basically what it looks like
and that's just a very simple figure of eight weave.
Okay, so the next step is we're going to cut this wire off and all we're going to do is attach these loops
to the actual bezel themselves so that they can't bend up when
when the pendant is worn.
But before we do that, I'm just going to do something with this wire here. I could just cut it off
but I may as well just want to try and see if I can't use this somehow.
So I'm going to
swirl it in
and see if I can create some sort of detail with it. I might need to
shorten it a little bit and cut it off completely. I don't know if I like the look yet.
We'll see.
Just kind of roll it in
and see if it kind of fits in.
Not too sure if I like it. Maybe I'll leave it, maybe not. We'll see.
But that's what it looks like at the moment.
So you can leave that in if you want to. I would also recommend if you do leave it in to
attach these two together
so that this, when it gets hooked on clothing, as I said, or even here, doesn't come apart.
Right, so the next step is obviously to tie these all to the frame and then we can oxidize and add some beads.
Okay, so all I'm doing here is I'm reusing some of the wire
so I don't have to add any in and I'm just simply sliding through
the frame and it's a little bit loose. I'm going to open up, but you get the idea.
So slide it through the frame and kind of try and slot it in
within the weave so it's not quite as apparent and then obviously just travel across and do the same with this
loop here. You can
make sure that the wire kind of disappears within the weave
and you just kind of slot it in like that and you can see it kind of integrates with the weave that's already there.
You can't wrap it too many times, but yeah, you just want to hide it. So that's that. So now I'm going to
oxidize it. I'm going to attach this loop. I'm not sure yet if I'm going to keep it. Maybe I will, maybe I won't.
And after that, I'm going to add some beads maybe. I'm not sure yet, but I think I'll add a couple here.
Maybe some here. We'll see. All right, let's put the last beads on.
I'm just going to wrap this around the bail securely somewhere so that they are
tied off and then we're going to trim off
all of the excess wire.
And that's that.
And that's the pendant done. Thank you so much for watching. I really hope you enjoyed this.
If you haven't already, hit the subscribe button because I upload new stuff on a regular basis.
If you feel like joining our artist community on Facebook, I will pop a link to the group below.
We're a fun bunch. So feel free to come and join us.
I also have social media if you want to follow some short stories that I've put up occasionally and I've got Facebook, TikTok, Instagram,
Pinterest and obviously YouTube.
And also a link is below. And last but not least, visit my shop if you're interested in getting some kits for these tutorials.
Gemstones, beads, wire,
and all sorts of other things. So as before, there is a link to all of that in the description below.
And that's it for me. Hope to see you next time. Bye!