Slack Snap - Parallel Redundancy. Can we get 2x the strength with 2 webbings?

HowNOT2
100 followers
1 Video View·Nov 21, 2018
When we rig a spacenet or highlines that many people will be on at 1 time, we need to make our system stronger. Can we do that by making 2 webbings work in unison by doing parallel redundancy. Does tensioning 2 webbings together give us 2x the strength?
Thank you https://raed-slacklines.com/ for donating the weblock and webbing in these tests.
➜➜➜ Learn Highlining at https://www.slackline.com/highlining101
➜➜➜ 100% of donations goes back into the channel. https://www.slackline.com/donate
➜➜➜ Bolting Bible is at https://www.slackline.com/boltingbible
➜➜➜ A lot more is at https://www.slackline.com/
How strong is parallel redundancy when you pull two webbings at the same time to share the load?
Check it out on this episode of How Not to Highline.
Hi, I'm Ryan Jinks and welcome to a Slack Snap episode where we like to break shit
just to see what happens. And in this test, we're going to find out if parallel redundancies
makes things stronger for things like space nets or projects where you put up a lot of hammocks
on a single highline. Those are unique cases because everyone knows now that if you make the
backup line tight, that it's going to suck to walk. But if you're trying to rig a space net,
you're more worried about a leg not breaking than you are about the ease of walking a highline on it.
So this is pretty normal, assuming you don't have sewn loops on one side.
However, rarely do we tension both webbings evenly, at least today.
So we did some tests to find out how strong some parallel redundancies are to see if we
could get double the strength before one side would break. Now we've already broken type 18
as a single piece of webbing and it broke 5,350 pounds in the web block like normal.
So now let's find out if we can double that with two strands of type 18 pulling evenly.
Okay, we're testing two strands of type 18 evenly tensioned on one web block on this side,
which would be the equivalent of like a space net leg. And this side is in separate web blocks
because you can't just line grip two webbings and pull them into one web block. So we may rig
this at GGBY this way in order to get more strength out of our webbing. This stuff breaks
around 5,000-ish pounds of force. This actual webbing I've tested on all the other tests. So
we will find out if we can get 10,000 pounds of force the way we rigged it here.
Okay, 7,750. We did get more strength than just one piece of webbing. This feels very
stiff right here and it's very melted. It's where it was in one web block. Whoa, it bent that pin.
So this web block has a big diverter right here. So like that's supposed to hold more strength,
right? But it bent the pin. It doesn't usually break there, but it had a small bend radius.
So instead of the back of the web block, which it should be breaking here, not here.
That's very interesting. So in Rad's defense, their new pro web block is steel and a big
center diverter. So there's a lot of benefits to this. And I definitely tested this in a way
that it's not designed for. And that's why the pin probably bent. I didn't continue to
test this with other web blocks because I don't want all my pins to bend. So they are going to
see if they can recreate the problem and solve it. But if you use these like normal, they're
perfectly fine and actually a good web block. So then we redid the test with four web blocks to
see if we could get the results we wanted. These are tensioned approximately the same.
This is a bit shorter. So these broke one at a time. This broke in the back of the web block,
like it's supposed to. This one broke behind the web block. This right here was right there.
Just like they always do. But one strand of this stuff breaks at, I don't know,
50 to 5,100 pounds of force. And we've got 8,150 with two strands. Since they broke
separately, they definitely had different tensions. But either way, they kind of work together. I'm
sure if you got them more even, you can get that to 9,000 pounds of force. I don't know if you
get that to actually a full 10,000 pounds of force. So in hindsight, I wish my two type 18s
had an even length, especially on a sample that short. But we moved on to Rad's Parsec,
their polyester webbing. It has low stretch, so I was a little bit more careful when we did the
parallel test. But check out what happened when we broke a single strand of this.
Wow. This shit exploded at 7,450 pounds of force. That's pretty damn good.
So then we put the Parsec in four web blocks and pulled two strands as even as possible.
14,750. That's 14,000. So here, broke in the back of the web block,
shredded like Parsec does. This got super fucked up somehow. Oh, I think it slipped.
That's why it didn't break. But this right here is so crispy. This was definitely in the web
block. You can see crispy creams right there. This side, super fucked. That's what happens when
it slips. It damages the webbing. This right here feels very normal. This was not in the web block.
So we did it. We practically doubled the strength of our test by putting two of these in parallel.
Now, if you are going to do something like that for a space net or a hammock project,
that's not a backup. Those are just two webbings working together. You would have to add something
equivalently as strong, doubled up or whatever, underneath. So that means you're probably going
to have like four lines if you're going to have a super strong leg. So space nets and hammock lines
can get pretty complex other than just making sure you have two webbings to have a strong leg.
You have to make sure your anchors are bomber. You have to make sure they're equalized right.
And you have to consider what's going to happen if there was a main failure and in a space net,
things would get slack and you may not have as much force on one of the legs, depending on how
many people are on it. But in a hammock situation, if you had 18 people on one hammock line and you
had a main fail, everyone's going to shock load the backup parallel redundancies. And so really
consider all that before trying to do any complex projects that you see on YouTube. As you can see,
there's a lot that goes into rigging space net or hammock lines. Therefore you shouldn't do any of
it. Hey, thanks for watching, but don't be an idiot and go try to put 10 of your friends on a
highline so you guys can all get a cool selfie. Make sure you understand the forces involved
before you push highlining to limits it's not supposed to be at. If you want to find 10 friends
that would be dumb enough to do that with you, go to slackademics.com and check out the 1300
Facebook groups that we listed out based on areas so you can find some slackliners near you. If you
haven't been there yet, go to the churchofslacklife.com. We have books on FlowState, we have the
Bolting Bible on there, people's Slack Life testimonies and a whole bunch of other cool stuff.
And we also have a Church of Slack Life YouTube channel where people share what the Slack Life
means to them. Until you have a chance to rig a complex project, don't forget to
follow, subscribe or like depending on whatever platform you are on. Cheers!
