I made my first "product"

HowNOT2
100 followers
1 Video View·Feb 14, 2024
Introducing the C.L.A.M.P. - Compact Lightweight Adjustable Mounting Point for your cooking system for better big wall nights. Read our over-the-top description of this revolutionary combination of underwhelming products packed in a zip lock bag at https://hownot2.store/products/clamp-big-wall-stove-hanger
Learn about big wall climbing in our video series and ebooks at https://bigwalls.com
👉 Learn and SHOP at https://www.hownot2.com/shop
👉 Best EMAILS on Earth: https://www.hownot2.com/signup
👉 SUPPORT US and get gear discounts https://hownot2.com/support
👉 10% off ROCKY TALKIE by clicking https://www.hownot2.com/rocky
I don't know if this gets your rocks off
like it does for me but this is a pretty
cool hanging kit for your system stove I
used to have or if you've seen our big
wall series uh this big old fat piece of
webbing that you just clamp and hope
it's a b full of so that is your toilet
paper if you don't bring enough and I
was like I don't like it because if this
nylon dangles near my
flame I thought well what if we use the
core of power cord which is technora cut
and heat resistant
so even if you have a length that does
kind of put it near flame it might be
super good enough if you stick it
directly in the flame even Tech nor
could melt but it at least is better
than nylon I also didn't like the fact
that this nut that tightens up this 4in
hose clamp if it's in the bag with my
puffy we'll tear it so I got this 3/4
inch rubber band and put it on there
what I'm trying to do is not just carry
the climbing stuff that you need for a
big wall but also provide all the little
stuff that's a pain in the ass to get
when we made the big wall series
Jeremiah and I spent probably 2 hours
hunting down a host clamp trying to find
some webbing at bren's house and
assembling this at the last minute like
everyone does for a project before they
go up a rock so what if we just make
something introducing to you the clamp
system the compact lightweight
adjustable mounting point it's more than
just three things in a Ziploc bag let me
explain so I pretty much uh try to buy
each component in bulk or get them in
bulk with the power cord and then I try
to make it as convenient as possible if
you're buying other big wall stuff we'd
be able to throw this in the bag for
$2.99 or something get 20% off this if
you're a supporter now I give you the
components that would be a pain in the
ass to go and Source out yourself
individually there are probably several
ways you can do this these are the ways
I do it and I'll give you the reasons
why I do it and you could do it the way
you want to do it please don't sue me
for trying to make this easier for you
unboxing the clamp the beautiful
Packaging is easy to open now included
in this is 4T of a single strand of tech
nor this is cut resistant and heat
resistant even though you could cut it
and melt it if you tried hard enough it
would be nice if you used a figure 8
because I've never had a figure8 slip in
any material before including dyema if
you just try to do an overhand or
something else it might not be super
good enough the other thing you don't
technically want is a loop this big and
I'll show you why in a minute so you can
see the size Loops here but you don't
necessarily need it this long but it can
be whatever length you would like which
is why we provide more than
less so this hose clamp can just open up
completely and you just slip on both
ends I feel like the expensive kits are
just as much of a pain in the ass so
then just take your cooker and slip it
over the back here and you probably want
this bulge here in the front though you
could put it in the back but that's
where your hand will be using this the
most or you'll be clipping this off to
to things when you're just clipping it
away for the night but anyways we're
going to be covering this up with a
rubber band so it's not the end of the
world either
way get that on there just enough so you
can still slide this back and forth Tech
nor is cut resistant but you can still
cut it find what would be dead center
hang it up make sure that your Loops
aren't like that before you tighten it
up you want to make sure that they're
facing up make your final adjustments
and then tighten it down pretty tight
because this is going to have boiling
water in it and you don't want it to
come off now the reason I feel like
there should be a loop here is so it
can't come off of this you don't want to
just stick this string down the side and
then clamp it on there I don't feel like
that's bomber now I don't like how sharp
this is or this if you were to put it in
a bag with your puffy now the trick with
our sharp edge protection technology is
to go and put your string through there
first and then slip it over there that
keeps that sharp edge there from being
being a problem what I don't like about
a four string or wire system is there's
a lot more stuff in your way once you
find Center and you can put water in
this before you go up a wall and make
sure that it's you know going to be
level and it's not going to be tipped
like this now you can see how much nicer
that Loop is being small when I try to
put this lid on versus having the loop
bigger and this tail then facing down
that's kind of obnoxious cuz when I want
to put the lid on I don't want that in
the way I made this one earlier and it's
got the the Tails of the figure eight
facing up but I don't like that because
when I try to put the lid on there it
keeps the lid from sealing properly now
you want to always properly test your
jet boil before you put boiling hot
water in it so now let's test it with my
bolt Buster adapter here since I don't
want to mess up my jet boil let's find
out if the string breaks first or if
this hose clamp
[Music]
does that is slightly more than two cups
of water now I think this is longer than
you need it but however long you make it
what's nice about this is you can wrap
this thing around and you can just tuck
it underneath this rubber band making it
out of the way when you're not using the
hanging kit nice when you're at the top
of l cap and you don't need it to be uh
in your way now what are the risks the
traditional hanging kit that you can buy
for 20 times more than money is uh
hanging it from the base and so it grabs
it from the bottom here this part it's
holding it up from here now if we're
holding it up from here the only thing
that keeps this from falling off are
those dimples and they have been known
to fall off before so make sure that's
solid keep an eye on it don't move
around a lot in your portal Edge before
you try to hang this and have the thing
that's on fire fall off I forgot my jet
boil with my crappy hanging kit using
this crappy piece of webbing I was on a
G7 now don't don't get me wrong I love
my G7 pods which we do carry in the
store by the way it's squishy it's like
making food on a water bed and so I was
holding my stove really carefully it was
not even a jet boil it was a yeah it was
a pocket rocket and so I'm using this
Pocket Rocket thing with the stove on
top and I'm on this G7 and it's 30° and
I'm trying not to shake I was like whoa
this hanging thing is really essential
and so that's why I'm on this hanging
Cooking System kick and I hate my other
setup and since I was making one for me
why not make 20 more and stick it on the
store if you guys want to leave me
feedback on how to make it better you
can let me know you can probably use
this on other all-in-one cooker systems
assuming the hose clamp works I'm trying
to make this a little bit more
convenient for you guys but the assembly
required is so the risk is on you more
than it is on Me Maybe don't include
that yeah I was thinking the hair as
hair scrunch you would cover just
anything to cover this I think is smart
I've never had mine covered before but I
definitely like having having that
especially if I'm going to make a really
nice product in a z PL bag for you guys
trying to stock up all the bolting
Hardware you would need to install or
replace bolts on routes but not just
that but also all the miscellaneous and
annoying stuff that you would need
including I'm practicing cord drilling
after I make this video and I would make
sure that the tube comes with it because
it doesn't when you buy this and that
this lid was obnoxious to make and so I
might not send the bottle with it but if
I do something like this I would try to
include everything that's the kind of
stuff we're working on in this shop uh
thanks for watching click this if you
thought any of this was helpful or this
twice for redundancy
cheers
