Fixe Triplex Removable Bolts tested

HowNOT2
100 followers
Nov 11, 2020
We test fixe triplex bolts (90mm at https://fixehardware.com/index.php/fixe-plx-duplex-ss-12-x-90mm-triplex-3-piece-bolt.html) in a lot of ways in a lot of things. This episode has a lot more data, please let me know if you like more data per episode. We were able to fit it in 10 minutes.
We are not sponsored. Please send $toke (links in website)
Live life high... safely. It's all FREE including the BOLTING BIBLE at https://www.SLACKLINE.com/
The Fix Triplex removable bolts are some of my favorite bolts and we tested them in sandstone
and we got some pretty interesting results because we tested 55 millimeters and 75 millimeters yes
these are both 75 millimeters but we tested both and we're going to show you what we got
Hi I'm Ryan Jinx and welcome to a Bolt Buster episode where we're going to go and go into
depth get it on these Fix Triplex bolts now these take a 12 millimeter hole and they take a very
specific 12 millimeter drill bit which you kind of got to play with because if it's too big it
won't tighten the wings don't engage enough and the thing just spins inside the hole and if it's
too small you're never going to get it back out so they're a little finicky in that regard but
I wanted to see when I was testing things in sandstone what happens when you use these bolts
now it is much better at least in the highlining world to use a glue-in bolt for sandstone now I
know that's not always common but if you are going to use a bolt in sandstone that's a mechanical
bolt like these you've got to use long ones and you'll see why in this episode so all the tests
are in sheer and the 55 millimeters that we tested which is a little over two inches I believe two
and a quarter doesn't give you two and a quarter inches embedded in the rock this 75 millimeter or
3.25 inches is only three inches embedded in the rock if you're lucky and so two inches are
embedded in the rock with the 55 millimeters so very interesting that they came out shocker
and they kind of destroyed the rock as they were as they were coming out which is really cool for
the slow-mo's and the forces that we got were 27.3 kilonewtons 25.54 and 33.02 which are
technically strong enough however if you did cyclic loading or if time wore them out if it
got wet and they were used while it was wet it could compromise them these were new holes and
with new bolts and so I don't know what time does put in the comments below what you think
long term would do to these kinds of bolts but it was pretty hard and to install them
because we had to actually pull on the bolt buster machine to one kilonewton in order to tighten the
nut otherwise they would just spin in the hole and yes we were using the right 12 millimeter bit
however sandstone is I don't know made out of sand and I guess it just didn't engage like it has
for me in granite which is where I normally use them so then we tested 75 millimeter or three
and we got the nut it nutted on us the nut came off the threads which is really interesting
because the bolt did not come out and it was pretty high at 41.5 kilonewtons and then the
other two bolts did come out at like almost double as the shorter ones that extra inch just makes
all the difference 43.95 and 50.52 is pretty dang good for a removable bolt
and they came out so technically they are removable a fun fact some bonus material in
this episode is some of our concrete tests which we might do in a separate episode depending on
and we got uh 43.58 39.66 and 35.24 in concrete in sheer just like we tested in sandstone which
is interesting because we got pretty much higher in the sandstone very interesting in that regard
the tension another interesting fact these are just so interesting tension basically the same
as sheer that's also interesting tell me what you think about that you can see all of this stuff on
our bolt buster chart you just go to the bolt buster chart on slackline.com and you hit ctrl f
and you type in triplex and they'll all show up and if you want to see every video because we got
lots of cameras on each of these tests uh and you want to see something specific you can go to the
videos associated with them every folder is numbered so you can see every brake test it's
super awesome if you are super bored but if you're just sitting on the toilet watching this
let's bring up another interesting fact before i get into the facts we're gonna have a discussion
notice the hanger is below this flange now if you don't know how this bolt works
i'm gonna take the nut off here and this rod is tapered on the end which pulls through the sleeve
expanding the cone okay so if the hanger which is what you clip to is pulling on this it's pulling
the sleeve out of the rock technically leaving the cone in the bottom so you tighten it before
you use it obviously is that a death wish okay this requires a half inch hole in a hanger in
order to do that because that's a 12 millimeter bolt this one is the this one is the three-eighth
inch hole hanger on top of the flange pulling the rod up leaving the sleeve
in the rock okay try not to get too complicated here anyways can you see the difference between
this and this this seems to make more sense right however without really putting too much thought
into it i've always used it like this which one's right you ask well let me tell you when we put the
hanger below the flange we got 40 42 and 40 kilonewtons and when we put it above the flange
the way you would think would be more correct we got 43 which is higher and then 39 and 35
which is lower so basically it didn't matter please put in the comments below what you think
how these are supposed to be used and why since bobby and i i don't think ever came up with a
conclusion for that please help us out with a one-time donation a patreon pledge per episode
or buy juno coffee which is my coffee business i started which if you've watched any of my episodes
by now you know that anyways the more money i have on this channel the more stuff i will break
i promise uh our goal is a thousand bolt breaks for around 300 now no rocks were harmed in the
making of this episode because they're rocks you know what's funny about trolls people bitched
about us using concrete and that's not realistic rock even though the bolts were breaking and
like what would it matter where they're you know whatever and then we go outside and people bitch
about us destroying rocks i just can't make anybody happy but i'll tell you this we were
in the middle of nowhere and we made the area nicer than when we were there we picked up a
bunch of trash from a bunch of slobs that were there before us and when we left didn't really
tell we were there because you know they're rocks so chill i'd rather have comments below
about what you think of these bolts and the results we got because that'll help us guide
what we break next and uh what rabbit holes because we're always trying to figure out what
rabbit holes to break next and that'll take a lot of work to break 20 bolts takes like all day
so be gentle on the request you can only chase down so many rabbit trails anyways make sure you
like follow and subscribe on this channel and hit that bell button so you're notified
every time we come out with another episode cheers
