Thank you to everyone who has been supporting our channel! If you use the link below before you purchase anything on Amazon, we get a royalty for sending you there, thank you!
Our store is located at 139 Caldwell St., Rock Hill, SC 29730.
all right ladies and gentlemen this is
joe's classic video games back with
another cool video for you today we've
got an issue we're still working on the
dungeons and dragons pinball machine
and you may not be able to tell but this
is the translight from it uh the plastic
part
and if you watched our other videos
where we were repairing it
basically the machine had some uh had a
fire inside of it
burn up the wiring and this plexiglas
which is just flimsy
like a styrene type material or whatever
was in front of it and the heat warped
it
so um we've got to do something to
straighten that out so
we're about to attempt it and we figured
we'd film it
you can't buy a new one of these as you
can see there's a crack
in it but it's it's it's so
nothing's damaged so i think that'll
look pretty decent
but the main problem is it's all warped
it's not flat
as you can see so we've got to do
something to try to get that where it's
where it will lay flat behind the sheet
of glass
so what i'm going to attempt to do i did
a video on uh
play field plastics where we did the
same thing i'm going to attempt to take
a heat gun
heat it up a little bit and then take a
big heavy piece of glass that i've got
here
and lay it on top of it to flatten it
out
and we're going to see what we can do we
can't get it too hot if you get it too
hot you might burn the ink
you might burn a hole in it you may
catch the whole thing on fire so i don't
know how this is going to go but we're
going to attempt it we're going to try
to make it look a little a little better
i'm going to go real
easy on it though and not get too crazy
but uh
we'll see what happens here we go
we got two speeds
and i might see it start warping a
little bit where i'll know that it's
you'll see how you see it move a little
bit just from the heat
so the reason that it's warped like that
is because it's stretched a little bit
from where it melted
you know
so we'll try to heat it up a little bit
and then we'll put the glass on it and
see what we get
[Music]
it's such a large area i don't know if
we'll be able to
[Applause]
do it all at once one time but maybe i
can do part of it and then do do
another part again it's ironic that a
a trans light with a dragon on it
got so hot that it started melting all
right this all still feels pretty
solid so i'm going to go a little closer
with it
to try to get it just a little bit more
warm all right see it collapsing right
there because it's warm enough
keep in mind too that we're on a flat
showcase
so if it collapses it might lay pretty
flat on its own
[Applause]
don't stay in one place too long
since i'm seeing it move i'm gonna go
ahead and lay the glass on it and just
see what it did
hopefully it won't crack it or anything
well i think that's already a lot better
but
i'll uh i'll let it dry for a few
minutes and then we'll pull it back off
and
hit it some mo so be back in just a
second all right folks so we let it cool
down now we're gonna do round two
see what happens
[Applause]
[Music]
i can't tell if that's good or bad i
guess that's good
hmm
my other option i thought about is uh
doing it with the glass on it
but i don't know about heating up glass
that might not be smart
i haven't decided yet what do you think
joe
thanks and try it you look like you
think i should try it
what do you think i don't think it'll be
hot enough to
to do that maybe i could
do it under the glass and then just lay
the glass down on it what you think
try that all right we're experimenting
here
think it'll get too hot or you think i
got it too hot
well it started getting there was like a
bubble that was disappearing
[Music]
i can't quite get it flat enough because
all that's still high too
wait do it on the glass do you think so
i don't know that it'll go through
though because you'd have to heat up the
whole glass
yeah i don't think i can get it hot
enough to where it
actually goes through the glass and
heats up the plastic enough to make it
malleable
i think uh i think maybe i keep focusing
on the middle because i think it's kind
of holding it up in the air where it
can't get everything perfectly flat
still looks better than it did it's
getting there i just looked a little
better but hey what can you do
that started moving
[Applause]
um
[Music]
it's a lot more flat than it was though
it had big like ripples in it and things
i got to mess with that up there that
was starting to get out of control
all right folks so we'll come back in a
minute we're going to play with it a
little bit all right folks so here's the
finished product
so we we did that a little bit more but
we kind of we didn't go overboard with
it because uh
it was making it wrinkle a little bit
like uh
you can see how it made it even worse
right there basically it's almost like
putting toothpaste back in the
in the tube what's it once it gets
wrinkled
i don't think the heat can really make
it flat again but we made it pretty flat
so what we had to do
the reason that this was all messed up
there was two things happen in this game
one the back box i don't know if the
back box fell off the game or if they
dropped the whole game off of a truck
but uh the back box had damage we're
messing with the header right now as
well
i mean the topper as well and it was
damaged as well
and if you look really close where that
crack is there's a long line
that's because they broke this glass and
whenever they did it scratched it and
even
snapped it in that one spot so all of
the trim that goes around the edges is
missing and everything
we were able to get a new lift bar i
couldn't get the new the original trim
stuff that goes on it
and what they had done was tape it to a
piece of plexiglass that looked like
crap
so we had a new piece of glass cut and
then we taped it around the edges
it's it looks rough on the back but
we kind of had to do that to get it to
lay as flat as possible on the edges so
that it would look
as close to original as possible
and you can see if the light hits it
that it's not let's see here
that it's not flat see how it's rippled
up a little bit
but it looks a heck of a lot better than
it did
and we got the big bumps out of it at
least now it's just got a lot of little
ripples so definitely not perfect but
like i said they don't make a new one so
we're kind of stuck with it now this
part here where the
where the uh there's that cut
i don't know if i'm going to tape that
yet or not i might but the problem is if
whenever you light it up you might see
the tape behind it so i don't know
we might just leave the rip in it and
leave it how it is instead of trying to
tape the rip back flat
and we put all the thing on and put the
uh
lift back on it so that's kind of what
we ended up with
it's definitely not perfect but what
i'll do is i'll go ahead and slide it in
the game and then show you how it ended
up looking
uh compared to where we were before all
right folks so this is how it ended up
it looks nice and clean with the uh
with the lights off got a little bit of
a reflection though of course because
it's glass i'll turn it on and you can
tell me what you think
never did light up that good the kind of
a thing from the 6803s
you can get like a round bowl that makes
it light up a little better
well it's trying to find all the balls
which is why it's moving slow
there we go all right it found them
but i think it came out pretty good
really compared to where it was it looks
nice check that out and that's of course
a real classic
uh painting from the guy who did the
dungeons and dragons artwork for a while
there
uh let's just say elmore i believe is
his name
i'm sure you folks may know more about
it than me but there you go so we didn't
get it perfect but you can't really tell
it looks pretty good not perfect
but considering what we were working
with pretty neat now i'm going to film
another video showing how the game plays
and everything now that we've got it
we're finishing it up now we start to
put the topper back on it and all that
but
i'm gonna film another video showing how
it plays and just all the artwork and
how it ended up so
we will see you in that next video
subscribe to us if you like repair
videos like this i know on this one we
didn't do too much but
we uh we did get it fairly flat again
that's a neat little trick so subscribe
to us if you like stuff like this we're
always tinkering with the arcade games
and pinball machines and jukeboxes and
we will see you on that next video