Laminate on the wall. Installation of 3D laminate. All stages. Unusual volumetric wall.

Pavel Sidorik. Renovation and Finishing
79 followers
7 Video Views·Dec 11, 2022
Hello friends I greet you all on my channel this is Pavel Sidorik a channel about repairs and renovations
In this video I will show you how to make 3D laminate on a wall Recently we did a cosmetic renovation
Renovation in one office where they installed walls made of laminated 3D panels This is relatively new
An unusual material specifically designed for installation on walls and ceilings
In this video I will show the entire process of installing these laminated panels In the room
where the repair work will be carried out it is a 20 square meter room Here we need
Install a new floating floor made of interlocking quartz vinyl and a decorative wall with 3D laminated panels
The first video will be about the wall Before installing the panels just like laminate
They need to acclimatize For this the packages are placed in an unopened state
on a flat surface with an air gap In the room where the installation will be performed on 48
Hours The panels are called ChronoWall 3D made by ChronoSpan Size 1296
132 millimeters Thickness 12 millimeters Required materials for the execution
This work The panels themselves Practically it is 12 millimeter laminate
Just without locks The panels have tongues instead of locks The ends are also different They are processed on the back as well
There is a quarter The back has a polymer coating Panels can be combined by color
In our case two colors are used The framework for installing the panels will be made from
A guide for deck boards It's expensive It's much cheaper to do all of this from wood
A leftover piece Just a piece of material that the company that ordered the repair had left over As they say
So that it doesn't go to waste put it to use More clamps will also be needed This is metallic
Mounting bracket for board Quick-installation dowel 6 by 80 If you need to level the framework
Plastic shims will be needed Screws for clamps Tools that will be needed
To perform this task Square tape measure and a regular pencil Jigsaw or angle grinder
Laser level or regular bubble level Drill and screwdriver Let's get to work
First of all I assessed the degree of wall curvature using a laser level In our case the wall
It turned out to be relatively flat The curvature of the wall can be easily determined by the laser beam Next I did
Marking on the wall for the future framework Used a laser level and a laminate board The distance
between 40 centimeters of strips Then the guides are prepared according to the height of the ceiling For
We use a jigsaw for the cut You can use a grinder but it will create a lot of dust All guides
They are cut in such a way that a 1 centimeter gap remains Then immediately in the guides
We drill a countersink and a hole for the fastener This is what it should look like A hole for the fastener and a countersink
We start mounting the boards on the wall We align the boards according to the drawn lines Using a drill
Drill a hole with a 6 millimeter drill bit Then tighten the fastener At the same time remove the old one
We made a hole with a 40-centimeter spacing It all depends on the material's rigidity
With this material I found this variation to be optimal Working with wooden beams was
It would be much easier If the wall is very crooked and you need to align the guides with a level
You can use plastic shims Insert the guide from both sides and secure it with a dowel
For this you can use both a bubble level and a laser level After installatio
Make sure to clean up all the boards otherwise trash will remain behind the 3D panels
How is this system structured The panel has three levels The first level is the one directly
which is on the guides The second level rises one third of the first And the third
The level rises by one board They can also go down further You can combine them
owever you like First level second level first second third and so on On the firs
The look seems complicated but once you start working everything falls into place and becomes very easy
You quickly start to figure it out The locks are designed so that they can lock each other
By overlapping creating a 3D effect Similarly the cut edge can also be closed here
We end up with a normal lock It turns out that the cut pieces can be inserted inside Even if the edge is
A double-edged sword yet it still remains hidden behind locks It can be adjusted or it can be secured
Long strips or short ones This creates a 3D effect The stapler has three working positions
First this is when the board is attached directly to the track This is the first level The second position
When the board is attached to the second level shifted by one third And the third level when the tabs are
They swing to the side and thus the board is attached to the third level We start with that
We are laying the first row of planks level Here we slightly cheated and glued the planks with sealant
It's easier to display them this way There is a surface on the floor but no level some boards had to be adjusted
Trim The gap will be covered by the baseboard They screwed in clips on top Then they started assembling the puzzle
Here you need to select the boards by color and length By the way the 3D panel manufacturer produces
The floor has exactly the same color and texture Therefore you can make the floor and the wall in one
The color and design solution Attach the clips on top The cut edge is covered by the end
Next board The panels are cut like regular laminate It's a pity we didn't have a table with us
It had to be cut all by hand As soon as they sorted out the layout things went much faster If
Compared to regular laminate the 3D version looks more impressive Moreover such a layout does not require
It requires a perfectly flat wall as the 3D effect itself creates unevenness If the wall is not too
If the curve is there you don't even need to straighten the planks Then we continue assembling everything according to the established scheme
In order The price of laminated panels is 60 Belarusian rubles This is approximately 28 dollars per square meter
Square The final touches and it's all done Here is the result we have achieved It all looks good
It's very unusual For the entire wall installation considering that this was our first time doing such work
We lost one working day We bought 3D panels and quartz vinyl from the Freedom store This is
One of the largest stores in Minsk offering a wide range of flooring and wallpaper I
The store offers more than 500 types of floor coverings from various manufacturers Laminate
Parquet flooring linoleum quartz vinyl 3D panels and much more Also there is a huge selection
All types of wallpaper from world-renowned manufacturers Here you can choose wallpaper for any modern style
Repair and also buy all necessary accessories Address and link to the website
You can find the store in the description of this video If you like this idea
Like subscribe to the channel and leave comments Wishing everyone a good mood
goodbye until next time
