Don't Install An Exterior Door Without This Kit!

Matt Risinger
48 followers
19 Video Views·Dec 6, 2022
Don't Install An Exterior Door Without This Kit!
Have you ever been on the job site, you're just about ready to install your exterior doors,
and you realize you forgot something? You got to make a run to the store because you forgot the
head flashing or the sill pan, you forgot peel and stick or caulking. On the build show today,
we're going to review this kit right here, which supposedly has everything you need to do an
exterior door install, and we're going to show you all the steps start to finish so you know
how to do it right. Today's build show is about DAP's quick kit. Let's get going.
Okay, guys, in the build show today, we're going to show you all the steps start to finish that it
takes to install an exterior door. Now, I've got Jordan Smith with me. You all know him. He is not
a carpenter, but he plays one on TV. Jordan's going to be my installer today, and I'm going
to walk you through all the steps. Now, this is a cool system. DAP just recently unveiled this to
the marketplace. This is called their quick kit, and this is kind of cool because everything we
need to install this door is in this box minus a few tools that we're going to show you here
and minus the house wrap, but other than that, everything we need is right here. So when you're
ordering your doors, you should also be ordering one of these, and now let's show you how to use
it. So first off, the first thing to do, obviously, is put your house wrap on. Jordan's put this on
per the manufacturer's instructions, shingle fashion. We're also a big fan of cap staplers,
so he's got this all cap stapled on, and the next step on this is going to be to cut out the house
wrap in a special pattern to receive our door. So Jordan, why don't you go ahead and walk through
how to do that. In the meantime, I'm going to open this kit up and show everybody what's inside.
So one of the things that I really like about this kit is that everything you need for the install,
literally everything you need, is in here, all the way down to the caulking and even the screws
that you're going to need for this install. But one of the other big advantages of this kit is
this right here, this install guide they've come out with, and by the way, they have one in Spanish
and in English in the box. Very detailed, very impressive. So this is going to walk you through
every step you need, and Jordan is doing this step right here. Once the house wrap's on, you need to
prepare the rough opening, and it's relatively simple. All he's doing is he's going to measure
first with his square. He's going to set that square up to an inch and a half, and he's measured
this ahead of time where he's put the square up here, and he's put it against the rough opening.
He's used the sharpie and made his outline for his cuts. When he gets to the sill, he's actually
going to cut that sill flush at the very bottom, and then he's going to do the upside down martini
glass cut, which is basically about a six or eight inch cut on a 45 at the head. He's going to flap
that head up and with a piece of tape hold that up so that we can do the door shingled fashion
at the head. Okay, now while Jordan's walking through those steps, let me actually take you
through what else is in the kit. So first off, the first thing you'll notice when you open the kit
is that it's got a sill pan in here, and this is awesome that they include this. This is hard
to find, and we do them in all kinds of fashions, but to have a three-piece sill kit ready to go
right out of the box, very cool. Now this one is a jam sill guard. It's going to give you a right
and a left end, and then you're going to need to cut the center and glue it up to actually form
a continuous sill pan. I'll show you that in a second. It's also going to include some composite
shims, which are great because then we can use these on concrete. These can be in a wet area.
We're not worried about it. We've got a full pack of shims. It's got three tubes of Dynaflex 800.
This is a great sealant that's going to work with all of your construction products, your OSB,
your house wrap, concrete. It's going to stick to all those, and you've got three tubes of that in
there. It's going to give you a tube of low expansion foam. This is their Draftstop 812,
so when the door is complete, we can spray foam around three sides to complete that air seal.
It's going to give you, believe it or not, all the screws that you need to install the door,
so no trip to Lowe's for those. It's going to give you a tube of RapidFuse. This is what we're
going to use to make the connections on the jam seal guard sill. And last, actually not quite
last. We have two more things. Sorry about that. Next up is their PolyFlash. This is a four-inch
self-adhered flashing, and I just dropped it, so pardon me for a second. I dropped the head flash,
which is on the back here. Okay, and the last thing in the kit, which also is really cool and
usually gets forgotten, is this. This is a head flashing. They include an aluminum one in white,
and I'm going to show you how to use all these parts and pieces in just a moment.
Okay, Jordan's got the rough opening fully prepped, and as you can see, what he's ended
up doing was he's cut that house wrap back just enough so that we can make a good sealant joint
right on there and make a joint between this brick molding here. Now let me pause for a second and
talk about the door frame that we've ordered real quick, because remember, you want to order these
doors ahead of time rather than just pick up what's available at the yard. But when I order
mine, I order a frame saver jam from Endura and also put an Endura seal on, and then most of the
houses in America, although not all, have some type of pre-applied brick molding, and so when
I called this into my millwork supplier, I said go ahead and put the PVC brick mold on. Now we're
going to integrate that into our flashing and into our weather barrier here, so I really like using
PVC in this case. Okay, so now that this is cut up, you can see here we're cut on the sides.
He's cut the two heads on a 45, and we've just put a piece of tape to flap that so that you'll see
we'll flap that over the flashing later. The next step is to get our sill pan going. So Jordan, why
don't you come in and help me with the sill pan? You're going to notice there's a right and a left
corner to the sill pan, and you can tell that which side is which by looking at the front at
the wings here. This is going to have the bigger overlap and the small section here. This is towards
the inside of the house. Remember to make this kit for a 2x4 or a 2x6 wall, single door or double
door, so you want to make sure you order the right kit. And then you see the center section here has
a recess. That's what we want to cut to make sure that we get this fit in there correctly. So I'd
pull it off about a quarter inch or so on the side and then mark it, and let's see we got a
sharpie we can use there Mr. Smith. Okay let's go ahead and mark this, and will you make that cut
for me sir? Yep. And then let me open the rapid fuse while you're doing that. Pretty cool product
that DAP also makes. This is a really nice all-purpose glue. You can use this for all kinds
of things including PVC. Keep this in your pouch too. You're not going to use all of it, and this
is a really handy glue to have after your project's done for other things. So we're going to keep this
and we're going to end up putting basically a bead of glue on either side of that pan.
We're going to drop the center in, and you'll notice there's a recess here on this pan,
so when the center section goes in it'll be nice and flush all the way across there.
Okay we've got our center section cut now, and you can see when we put that down
we've got lots of overlap, but we still are within that recessed area. That's good, that's a good cut.
Nice job on that Jordan. Now we're going to take our rapid fuse and we're going to run a couple
beads of this across here. We've got to be relatively quick because the working time
on this is only a couple of minutes, so you don't want to dilly-dally when you're using the rapid
fuse. And you can see that I'm running at least two parallel beads across there, and like I said
don't lose the cap. You want to put this in your pouch to use this at a later date. That's a really
handy product to have for later. And once we get that on, I like to actually do it on the sill itself
because this is going to, as his name states, fuse pretty rapidly. So give it a couple of the 30
seconds of clamp time with your fingers. Just press down hard on that. I put a bead up the back
side as well, so let's make sure that's clamping. And okay we're going to let that sit for just a
minute or two to make sure that sets up. So I'm going to move that now that it's clamped and put
it right here because the next step, if you read their directions, is we're going to run a bead of
the Dynaflex 800 on here. So Jordan, why don't you go ahead and get the coffee unloaded and we'll show
everybody how to put that bead on so we can put the sill pane in correctly. Okay y'all know they've
got great instructions on this, but basically we're going to lay a bead of the sealant to act as an
adhesive and a sealant. Now we don't want too fat of a bead. We don't want to mess up the level of
our sill, but we want enough that we're going to put some adhesive on there. So we're going to run
a bead in both corners like this. We're going to run a bead on the back side, and then we're going
to lay a kind of snake-sized bead in the center. And then we're also going to run a bead up the
sides where that pan is going to be in contact on the side there. And then lastly, we're going to
put a bead on the front side. Now you notice we cut our Delta Vent S flashing flush with the front
of the sill. That's vital. That's really, really important guys because we want to make sure we've
got good overlap and that we've shingled things correctly. So we want that house wrap, any water
that gets in the pan, to be on top of that house wrap. Okay, now this has been drying for a couple
of minutes, so we should be good here. And now we're going to put our sill down and lay it into that
bead of sealant and push it flush into that opening. Now of course, we're not really on a job site.
We're doing this here in our shop space with kind of a setup. If this were a job site, we want to
make sure we get our sill nice and level. We're going to make sure that if we need to shim, that
we're shimming that correctly. I'm not doing that here, but you'd want to do that if you're on the
job site. Make sure everything's nice and plumb on your jams and level across your sill. Okay, our
sill pan is in place now. The next step is we're going to integrate the sill pan with our WRB on
the outside, in this case the Dorkin Delta Vent SA. Now this is pretty cool. This is a dual release
paper, so we've got two sides that we can release. And what we're going to do is we're going to run
this peel and stick on the sides over top of our weather barrier and all the way up the jam on just
both sides. And we're going to make sure we tuck it in here so that if anything gets behind there,
it's going to end up on the sill pan so we can run forward. So Jordan, why don't you go ahead
and measure those two sides for me and let's cut these out. Okay, so Jordan's got that marked at
the top. We're going to cut that just past. I'll hold for you, brother. Okay, Jordan, that's the correct
spot on my end. Okay. How's it look on your end? Looks good up here. And we're going to end up
folding this in once we do the other release on the inside. And what we're doing is we're protecting
that vital corner. We're also bringing some continuity to our air barrier, right? Because
the Delta Vent S on the outside, or whatever you use for the house wrap, is also going to act as
your air barrier. And remember, like I said, this is your water barrier and your air barrier.
So what we're doing is we're making sure we have continuity in our waterproofing layer. Everything
is shingled correctly. The lower levels are underneath the top levels. And then he's going to,
once he gets that front side stuck on there real well, you might use your speed square to wipe it
down as well. If you have a roller, a J-roller, that's a great thing to use as well at this point
on the job site. And you can cut it flush at the top. I like to take it maybe an inch above.
Either way is acceptable. And then we're going to have to notch that upper corner with our knife.
You still have that knife on you, Jordan? When we get there, you just go ahead and notch that corner
so it can fold in. If you've gone a little high and that's totally okay, totally acceptable,
he's going to fold it over the sill pan so that basically we're shingled correctly at the bottom
down there. There you go. Okay, quick note here. If you have a J-roller, this is a great time to
use that. We're going to make sure that we really stick well if we have a J-roller. So I happen to
have one here on this job site, which happens to be our office and studio, right? But if not,
make sure you wipe that down with your speed square. Get some good grip on that.
Okay, the door now is all set on the jams. The next step is we're going to apply a bead of sealant
to our sill pan. So let's see, where did our caulk gun go? The beauty of this kit, too,
is that they include three tubes. So you're not going to run out. We've got lots of sealant.
But basically what you can see here is we're going to run a bead of sealant along these
seams just to double check that everything is nice and sealed.
And then up the backside, we're going to run a quick bead. And really what we're doing is we're
making sure that this thing is totally waterproof. And that bead in the backside is making sure that
we're also air sealed as well. Okay, so we're running that bead there. And then here's our
bead on the back of that. We want to make sure that bead in the back is a nice fat bead because
very likely that's going to be a spot where there's going to be a decent gap between your
door sill and this. And we're actually probably going to run a bead at the end of the install as
well in this location. So if it's not perfectly sealed at the get-go here when the door goes in,
don't worry about that. Moving on, next step. Are you ready? Okay, we're almost ready to set
the door, but we need to set a bead of sealant on the backside of this brick mold. And they've got
a great detail on here. Very, very cool. Where this jam, this is that Endura Framesaver Jam,
meets the brick mold, that PVC brick mold that's right here. We're going to run a bead right into
that corner. And then Jordan's also going to run a bead on the edge of the brick mold that's going
to help seal that to our peel-and-stick flashing that's right here. So let me help you do that,
Jordan, in a way that these guys can see it on camera. So just for the sake of clarity,
let's go ahead and lay this door down on a 45. And this is the joint right here that Jordan's
going to be running a big fat bead on. So run that from the top all the way down. Put a nice bead
on there, a nice heavy bead. Probably might cut that tip. You need to cut that tip any thicker?
No, I just need to get some pressure behind it. Okay, there we go. Yeah, good.
Okay guys, so Jordan's got this inside corner. He's got a nice fat bead there. He's running a
secondary bead that you'll notice is kind of halfway in between. This one's going to basically
act as a gasket when we put that brick mold up. I like brick mold because it's got a big fat
profile, which means that we've got lots of surface area to put it to make a gasket out of
this caulking. And again, I mentioned this earlier, but I like the PVC for this you used to. It's nice
and waterproof. You don't have to worry about swelling. There's no priming issues. PVC is a
great choice for this. And while I'm talking about that, let me mention too this Framesaver Jam. Now
Endura is one of my show sponsors and they make some really nice door products. This jam is a
wood jam, but the bottom section, the last several inches, is a composite material so that that
typical rot you see at the bottom of the jam on most older doors is eliminated now because you
don't have that end grain wood wicking up. And then of course we've also talked to our millwork
supplier about specifying an Endura sill as well. They make some really nice sills with some really
cool features. Check out my other videos on Endura as well to see that. Okay, so here's his bead on
the edge and then here's the secondary bead and you can see those running continuous all the way
up to the head of the door as well. Okay, let's set the door Jordan. Okay y'all, so Jordan did a great
job of getting us a nice u-shaped bead both the inside and the outside. It's time to set the door.
Now of course we don't have an actual door on here. Like I said earlier, this is not a
how to totally install a door. This is really more how to waterproof the door. Slide me down
just a little bit here Jordan. But you can see we're making basically a flange out of that brick
molding. And if you can see around the side here, you can see we've got a little bit of squeeze out
shown here which is good. Got a nice rough opening and car burners did a good job on this mock-up.
The next step in the process is going to be to take your shims and your screw pack
and we're going to secure this door. So Jordan, we're not going to do every step but let's at
least get this thing tacked in here. So the first thing you want to shim is your hinge side. You
want to have a solid shim on each hinge and if we did have a door here, what I'd typically tell you
is to take the hinges off one at a time, put a screw through the hinge, but if this was an exterior
garage door, we're not quite as worried about aesthetics, we could go right into the jam. But
basically what we're going to do is we're going to shim on the back side here and then we're going
to run a screw at each jam or pardon me at each hinge location. So Jordan, why don't you go and
tack us in here. Okay y'all, we didn't go into all the steps on the door itself but basically you
want to make sure that door is level, square and true, the jams are nice and plumb, that you shimmed
it on all three of your hinge points and then you want to shim it on the opposite side as well. So
we're not going to get into that on this video, that's not a carpentry video, this is a weather
proofing video. So the next step now that we've got this in place is to get our head flash on this
unit and I really like how DAP includes a head flash that's often omitted or you realize that
at the last minute you don't have one and so you're scrambling. You might lose a whole day
of construction because you forgot that head flash and having the kit very very cool. So basically
they've got great directions on here but what Jordan's going to be doing is he's going to measure
the head, that brick molding head, now remember this is not the door width but this is the width
at the trim and then he's going to add one inch in total that way he can cut a half inch off either
side. Now what he's going to end up doing is he's going to flap the sides of that down and then
we'll end up putting a bead of caulking on there and then we'll end up installing that head flash
into a bead of caulking as well. And the final step after that head flash is on is to go ahead
and tape that head flash off with the remainder of our four inch peel and stick flashing and then
we're going to go ahead and flap that down on both sides that's that weather barrier that we've got
and then we're going to tape the two angle pieces and at this point we've got a door now that is
ready for the very final step and that's this right here this is our interior air ceiling.
We're going to use this draft stop foam around the back side on all three sides and we're going to
take a last double check to make sure that we don't need a bead of adhesive where the back of
the sill pan meets the sill of the door. But guys that's it it's a pretty straightforward install
and I love how DAF has everything in the kit. Guys remember when you order your doors make sure you
tell the millwork manufacturer the exact specs you're looking for including those enduro parts
like I like and that pvc brick mold that I've got on this install and then also tell them that you
want a DAF quick kit. Remember you're going to specify whether it's a 2x4 or a 2x6 wall
a single or a double door this is going to work on all styles of door and you're going to end up
with a water and airtight connection on your doors very impressive system there'll be a link to the
DAF website where they talk about this but really this is a product you're going to order from your
millwork supplier. Guys if you're not already a fan of The Build Show hit that subscribe button
below we've got new content every Tuesday and every Friday follow us on Twitter and Instagram
otherwise we'll see you next time on The Build Show!
