This House has some CRAZY Insulation Details

Matt Risinger
48 followers
8 Video Views·Dec 3, 2022
This House has some CRAZY Insulation Details
Hey guys, the build show's on the road today.
I'm outside Boston, Massachusetts,
where I've been visiting for a couple days
to attend a building science conference.
And while I was up here,
I linked up with my architect friend, Steve Basic.
Now, if you don't know Steve,
he's been around the high-performance building world
for years.
And I've, for years, read his articles
in Fine Home Building and Journal Light Construction,
but it's so fun to actually meet Steve on a job site
and see one of his jobs.
Steve, how are you this morning, man?
What's up, buddy? Good morning.
So good to see you.
So what are we looking at, Steve?
What is this chocolatey, beautiful exterior in this house?
So the outside skin of this house
is a thermally modified poplar
that basically gets baked and treated
so that it can perform well as an exterior siding.
Very cool.
And become weather-resistant, insect-resistant.
And then these black guy, one-by-twos,
are some rain screen going on.
Talk to him about the rain screen details.
Yeah, so they're vertical rain screens.
Whenever you put a cladding on a house,
couple things that you want to happen.
One, you want to get rid of water
as fast as you possibly can.
So providing that channel allows me to drain that water
down and out, as Joe would say.
And then secondly, it provides a nice air channel in there
that promotes drying on my wall system.
So if things do get wet,
they can dry faster than they get wet.
And so this black tar paper,
is that your main weather barrier for your house,
your air barrier for the house?
So underneath that is a Zip R9 panel that we use,
but because we're doing an open joint rain screen,
meaning that there's little spaces
in between all the boards,
that we wanted to provide some UV protection
to the surface of the zip wall
so that we put up the black building paper.
And that allows us to provide a skirt
under each one of our windows
so that we can fully integrate that rain screen system
to our window installation.
And this exterior is beautiful.
Talk to me about this finished casing around these windows.
So I had the privilege to work
with some really talented gentlemen,
and we took some of the thermally modified poplar
and they made pre-manufactured
a bunch of the window casings inside.
So we have our nice slope sill.
And I don't know if you can zoom in and catch it,
but there's actually about a four degree bevel
on the head also.
So it's that down and out.
And I know a lot of guys,
when they talk about water management,
that they understand the down and out,
but what they don't understand is
it applies to everything.
So it's not about just getting water off the roof
or getting wall off the wall.
It's about getting it off the window sill,
getting it off the window head
and getting that water down and out
and getting it out of here.
Beautiful.
Let's go inside.
You've got some really interesting framing
and details on the inside here.
Steve, the first thing I noticed immediately
is you've got some closed cell on the walls
and you're framed a little unconventionally.
We've got two by six,
no, pardon me, two by eight walls, right?
Yes, these are two by eight walls.
They're on a 24 inch advanced frame
so that we basically spread it out
so that your framing factor in the wall
goes from maybe about 16 or 17% down to about 12%.
So that swing in five or 6%
changes the opacity of the wall system,
meaning the cavity space, it increases it.
So it gets me more insulation in the wall.
Okay, so we got two by eights on 24 inch centers
outboard of that is that zip R sheeting.
And in fact, we've looked at that outside
where you can see that, what is that?
Inch and a half?
Inch and a half R nine.
Of R nine.
And that's continuous on the whole outside.
And then tell me about this detail we're seeing
between the wall and as you get to the ceiling lid.
This is something that you don't see very often
and I think you're kind of the pioneer in that.
Yeah, so it might be better,
Jake, if we just swing over here
cause you can see it on the volume ceiling,
it's a little harder to see,
but on the flat ceiling there,
we basically, the question is,
is how do you connect the exterior air barrier,
which is the R nine zip panel
to my drywall air barrier on the inside?
Somehow I have to turn that corner.
So how do I do it?
I put a three quarter inch piece of Advantac that we rip
and I basically create an air sealing flange up there
that I can take to the outside of the wall.
Okay, so your zip R is coming up,
that's all fully taped and we're airtight at the zip.
And then this sits on top of that double top plate
so that you can flap a piece of air sealing tape
over top of that.
We tape all the joints.
So basically that piece of Advantac is nothing more
than a folded extension of my exterior air barrier.
I like the way you say that.
And then that folded extension
brings, comes in a couple inches
so I can run a parallel bead of acoustical sealant
and then seal my drywall to it.
And then I run across the house
and drop it down the other side.
And then your lid is totally airtight.
And I noticed there's no recess cans
or anything in the ceiling.
That'll all get cut in and we'll seal that in later.
Okay, gotcha.
And now tell me what's going on with the foam
because this foam's going up several feet and then stops
and then it looks like you've got a black baffle up there.
So we got the black baffle.
So anytime you put in a vented roof system
and you put in any type,
any amount of insulation in an attic,
one of the things you have to be conscious of
is wind washing.
And what wind washing is,
is air coming in through the vent,
the vented soffit and arbitrarily degrading by insulation,
by cooling it.
So I only want that air to go up into the vent.
And as Joe would say,
air's like a drunken sailor on leave, right?
It just-
It goes wherever.
Yeah, it goes wherever.
So by putting in the closed cell foam
and sealing those vent strips to the soffit,
the air channel only has one way to go.
It goes in my soffit, it goes up the vent
and it gets dedicated to the ridge vent
and vents my roof system.
And you've got a raised heel truss
so we can get-
It's a raised heel truss so we have 16 inches
around the perimeter of this house.
So we get above the top plate,
we have adequate insulation up there.
So that insulation that's at the very top there,
or as it's coming up, that's closed cell that is,
it's really not necessarily for insulation purposes
as much as air sealing and containing everything, right?
Air sealing, containing everything.
And it also keeps, you know,
I have seen it, I haven't seen it on my job,
but sometimes the guys will reverse lap the vent chute
and then they blow on cellulose
and they actually blow it into the chute and seal them shut.
So the closed cell kind of takes away all of those problems.
And then it gives you just a nice sealed cavity
to spray down into.
Yeah, and I don't see strapped ceilings a lot.
What's the purpose of those one by, what are they?
One by three.
One by threes on 12 inch on centers?
Yeah, so that's a New England norm.
We can't get away from it.
And the benefit of it is,
when you're doing a high performance ceiling
to the tune of say R60, 80,
or in fact, in Roy's house, we were up at around R110.
Wow.
So we really packed it in there.
So you got 30 inches of blown in insulation.
Of blown insulation that could accumulate
to about four or 5,000 pounds on the roof system.
So how do I attach that to the roof truss system?
Well, by putting the strapping in,
I can take my 24 inch on centers
and reduce that center to here.
We're doing 12 inches,
but you could go to eight inches or six inches.
You do whatever you want at that point
to enhance the strength of that attachment of the drywall.
Hey Steve, next I wanted to talk to you
about the windows in this house.
These look like some beefy, impressive, not normal windows.
What are we looking at here?
So I like to call these the Ferrari of the windows,
the window market, right?
These are really great to look at.
They come in a wide variety of sizes.
They're basically built to order.
So they can accommodate almost anything I want to do.
As you can see, we have a window here
that measures almost 11 feet by six feet,
and it's a triple glazed fixed unit
that comes in with the U value of 0.12.
So that's roughly an R6, R7 window at that size.
So that's double the R value of most windows
I've been using just as a reference.
Right, and it's not about energy efficiency.
We need to understand that,
that although I get energy efficiency
as a byproduct from my high performance homes,
it's about delivering a home to my clients
that meets their expectations, right?
The client that is buying this house
is everything he purchases is a value question, right?
So for example, when they're sitting here
and they're having Thanksgiving dinner,
they don't want to have their backs to a window
and feel cold drafts.
They want to have that comfort level
knowing that the surface temperature of that glass
is adequate enough that I'm not losing
my body heat to warm it.
And that's what this is about.
It's about comfort.
It's not about energy efficiency.
I tell people that if I can sell good health,
comfort and durability,
I get energy efficiency as a byproduct
of all of those decisions.
So I don't need to sell energy efficiency.
And the guys that are out there trying to sell it, don't.
Nobody buys energy efficiency.
They buy value in durability,
they buy value in health,
they buy value in comfort.
Nobody buys a BMW or a Mercedes
because of the gas mileage.
Steve, tell me about those European tilt turn windows.
We looked at one over here a minute ago.
Tell me what the action is of those.
What's the benefit of that tilt turn?
So the beauty of the European tilt turn windows is,
one, you get a really good air sealing performance
in these windows.
They're basically a reverse casement.
Because they're tight.
They're tight.
There's a triple gasket seal.
Yeah, there's a big old rubber gasket in there
pushing into you.
That push into it.
And for those of you that are familiar with air tightness,
when you do an air tightness test,
typically on a house,
you just do a positive or a negative test.
Well, when you do a passive house project
or one of my projects,
we do a positive and a negative test.
Now, the reason you do that.
So not just a positive blower door.
Right, because a positive blower door test
is gonna push all my windows against the weather strip.
So it's gonna seal them.
But what happens when the wind is blowing on the outside
and tries to push the window open?
How does it perform then?
Well, doing a negative pressure test on the air blower
allows me to identify any of those problems.
So knowing that I get a positive blower door
and a negative blower door test that are virtually the same,
I have complete understanding and confidence
in these windows.
That's amazing.
Steve, let's wrap this up.
Tell me, as we finish up,
I'm curious what the final insulation values
of these walls and these ceilings are.
Just because it's something that every builder in the nation
knows typically what their R values are.
What's this wall in this roof ceiling assembly?
So in the wall assembly, we have R9 on the outside.
We duplicate it with about an R13,
two inches of closed cell,
and then an additional 5 1⁄4 inches of rockwool,
which is R20-ish, 23-ish.
So that's 23, 36, 45.
R45 in the walls, rockwool, closed cell,
which is a flash and bat, which I've done,
and then zip R sheathing, inch and a half on the outside.
That is incredible.
And the things, again,
while it is super energy efficiency in the wall system,
understand that because of the R9 on the outside
and the closed cell,
we limit our risk on the durability side of things
by creating a really warm wall to the outside.
That's right.
There's no condensation in the wall issues.
And frankly, there's no vapor barrier issues, right?
Because we've got that closed cell,
which is gonna stop vapor from flowing through there.
So we don't have to use plastic on the inside
or some expensive membrane or whatever.
And we have the rain screen on the other side.
So if anything comes in on the other side,
it's drying from both sides of the wall.
The reason for the rockwool is not only
do I get a slightly higher R value per inch,
but it doesn't sustain mold, though.
Yeah, that's right.
It's inorganic.
It's a fireproof insulation.
Beautiful.
So I get the best of all worlds using that.
And then how about our ceiling lid here?
Above the strapping, you're gonna come in later
and blow this in with a blow crew.
How much are we talking about in there?
We'll come and blow that in.
And typically, for my roof systems,
I say vent until you can't vent.
And typically, we would start at R60,
which is about where this one's gonna be.
And there's no duct work up there.
And there's really very few penetrations
through that ceiling.
There's no recessed cans.
One or two pancake boxes that you might air seal,
but that's it.
We'll have a few things going through there,
but they'll all get sealed on the backside and we'll be...
I mean, it's expected that this house is sub 1.0.
Man, that's beautiful.
Steve, you rock, man.
I'll tell you what.
I was gonna do both videos,
but this is a great video on its own.
Let's go to the other house and make a second video
that we'll publish next week.
So if you wanna get ahold of Steve,
if you're interested in seeing more of his work,
there'll be a link in the description below.
This guy is an incredible architect.
He works all over the nation,
even though he's based here in Boston.
So link to Steve's website below.
I'm also gonna link to a JLC article or two of Steve's,
which is how I first got to know him,
so you can see some of the details.
He and my builder friend Jake
wrote a great article together in JLC.
I'm gonna link to that as well,
so you can see some of these details.
Steve's done an incredible job on this house,
and big thanks to Jim at Shoreline Builders
for letting us walk this job
and shut down the compressors for 20 minutes
while we filmed.
Guys, follow me on Twitter or Instagram.
Hit that subscribe button.
We've got new content every Tuesday and every Friday.
Otherwise, we'll see you next time
on The Build Show.
