Hemp Concrete Walls (R30 + Fireproof) - You Won't Believe How They Built This House!

Matt Risinger
48 followers
13 Video Views·Dec 4, 2022
Hemp Concrete Walls (R30 + Fireproof) - You Won't Believe How They Built This House!
Guys, this building behind me is absolutely beautiful.
But what we're here to talk about today is this crazy wall section.
It's like fluffy marijuana concrete.
It's actually called hempcrete, and you're going to see the entire process, guys,
from mixing it to forming it to pouring on today's episode.
This is really going to be a fun one.
Today's build show all about hemp concrete.
Let's get going.
Guys, I'm coming to you from a beautiful hill country job site here
where we've got a building that is absolutely drop-dead gorgeous under construction.
Japanese-inspired architecture.
In fact, the timber frame, the skeleton in here is timber framing from Japan,
that the wood itself is 300 or 400 years old.
We're actually not sure how old it is.
But let's first start talking about this right here, which I think is super interesting.
This is hempcrete, and I actually have the main man here, Matty.
Matty, you're with Hempitecture.
You're the contractor on the hempcrete,
but you're also kind of the North American hempcrete guy, right?
And you're actually selling these materials to other builders who are building with it.
Tell me about this.
What is this?
Yes, what we're looking at here is a hempcrete wall system.
It is a combination of industrial hemp, the wooden core of it,
and a specialized blend of limestone.
Okay, so let me break that down.
This is the bag of the hemp, and that's what this looks like.
It looks to me almost like a wood fiber,
like I was about to make OSB or particle board or something, right?
It looks just like wood chips, Matt.
And then this is, for lack of a better term, a cement, right?
A binder?
It is a binder, and it has a component of natural cement and limestone in it.
Okay, and you're mixing that in a big kind of industrial mixer on the job site,
maybe two yards at a time, and then pouring it into a form to get this.
It almost looks like rammed earth or some other type of kind of built-up product.
Is that right?
Yeah, that's right.
And really the first thing we do when we mix these together is we add water.
We mix it with water.
It's a very controlled amount of water.
We bring that over from the mixing station to our wall,
and we tamp it in forms, which is why it has that rammed earth aesthetic.
But this is not a structural wall, right?
There's actually some structure embedded in this wall.
Is that right?
That's right.
As of now, it's treated as a non-structural wall infill material that's also highly insulating.
So this is our insulation.
This is our sheetrock.
It's multiple materials in one.
Wow.
Okay, so this particular wall section here, Matty, we talked about this earlier.
This is like 10 inch thick, right?
10 inches thick.
And in the center of that is a 2x4 framing, which is the, for lack of a better term,
the bones for the building.
It's the structure.
And then the hempcrete that you've made on site, that you've kind of mixed on site,
is the muscles and the fat and all the other tissue that makes up the body of the building.
And then will this be left exposed on the outside?
This will not be left exposed.
It's going to get covered with a vapor permeable lime-based plaster,
usually in two to three coats.
And that's going to give this product a long lasting life.
Okay, so almost like a sort of like a stucco finish, right?
A non-painted stucco looking finish on the outside.
Lime plaster can be used inside or outside.
One cool thing about this architecture, you've got overhangs everywhere.
But what are the kind of big properties?
What do people like about this hempcrete?
What is it that compels us to use this?
Well, first off, from a building perspective, it's really insulating.
About R2.5 to R3 per inch, depending on your mixture.
Nice.
That's pretty good.
So we've got an R30 wall right here.
That's a big deal.
The second thing is an environmental reason.
Industrial hemp, when it's growing and it's harvested on a two to three month cycle,
it's absorbing carbon dioxide from the atmosphere and storing it into the hemp stalk itself.
We combine it with our binder, a reaction occurs that also seeks carbon dioxide from the air
and actually stores it in the wall.
So we've got a carbon sequestering thick insulative wall here.
Isn't there some fire benefits?
That's right.
The fire benefits of hempcrete is that it's 100% fireproof.
It will not burn.
We could take a torch to this.
We could try all day long.
It will not catch on fire.
Dang, that's pretty cool.
There's a lot of benefits to using this.
Now, I made kind of the, not inflammatory,
but the bold statement that this was a fluffy marijuana wall.
It's not really marijuana.
For those of you who are going to comment about that, let's preempt that.
What's the relationship between industrial hemp and marijuana?
To really simplify it, industrial hemp is sort of like the sober cousin of THC producing cannabis.
It is used as an agricultural commodity.
It's been used since the beginning of time to make ropes,
sails that brought explorers to discover the new world.
It's used in all sorts of products and primarily industrial applications.
Are there companies today that are using industrial hemp
in fabrication or manufacturing that you can think of?
Interestingly, in Europe, a lot of automotive companies
are using hemp fiber in automotive panels.
There's now companies in the United States that are making hemp wood replacements
for conventional wood-based products.
Even hemp bioplastics are becoming a new tangible idea.
Wow, very interesting.
So this hemp, this industrial hemp, it's a plant that grows in a field.
You're stripping the outside and that core, that stalk,
that, as I said earlier, kind of feels like a wood chip almost,
is what we're talking about here.
This really has nothing to do with marijuana,
except that it's a cousin product or a cousin plant, I should say, to that.
But there's nothing here you can smoke that you can get high on or any of that kind of stuff.
This is the sober cousin.
That's right.
I like that term.
That's right.
Matty, let's transition to actually showing people how you form and,
for lack of a better term, pour this.
Okay, so we got a fresh batch of hempcrete made right here.
Let's take a look at what the form boards look like.
Now, if you look at the outside of the finished wall,
you can see there's kind of a strata going on, almost like a rammed earth project.
And this has some similarities.
This is the form board right here.
They're basically doing this in two-foot lifts or two-foot sections.
So we've got a poured section down below here.
You're going to notice the electrical conduit's in.
We've already run that.
The electrician's been here.
You're also going to notice that the structure is inside the middle of the wall.
Now, most of the walls are framed just with two-bys,
and in fact, two-by-fours on a lot of the wall.
But this particular section of the wall is a sheer wall section,
and the engineer has designed a moment frame.
This is basically just a U-shaped piece of tube steel
that's been welded together and bolted to the foundation.
And that's going to keep the sheer value, the building, from racking.
Now, what's interesting about how they do the form boards, I think,
is these form boards need to be released later.
And so they want the minimum amount of attachment
that's going to hold it while it's being formed,
but also to be able to remove it without a lot of damage.
Now, they're using kind of an interesting product.
They're using FastenMasters Timberlock screws.
If you're not familiar with these, we use these a lot in construction.
You're going to be able to replace a lag screw with this.
But what these are doing is just giving us a temporary hold.
You'll notice they're putting a fender washer on the outside
so they can get some good bite on this OSB plywood.
This is three-quarters inch thick, so it's nice and strong.
And then to make sure it's spaced off correctly,
they've got a piece of PVC pipe here that's cut the correct distance.
I believe these walls are somewhere around 10 inches thick,
although this one I think might be slightly thicker.
And they're running it from this post right here,
which is a structural and also beautiful post that they're going to express.
And then on the outside here, this is going to be a door,
so they just have a piece of OSB as the form there as well.
Now, the other thing that's interesting is this won't grab on to steel,
just smooth steel.
What I'm talking about is the hempcrete, that is.
So what the engineer did was they've got these bolts
that are actually welded on as a tab,
and that's going to give that hempcrete something to actually bite onto.
Now, currently the hempcrete is not given shear value for this project.
The engineer is not relying on that for shear.
But I think that in time, as we use this more in America,
probably engineers are going to get more comfortable with it.
They'll be able to assign some shear value
because as you touch and feel it, it's very hard.
It's not as hard as a cement or, you know, a concrete wall, let's say.
But it's got a lot of, it feels very stiff.
It seems like there's a lot of mass on it.
And then when these form boards get replaced,
eventually on the inside and the outside,
they're going to put a plaster, a lime-based plaster on here.
So what you're seeing here with the strata,
this isn't actually the finished look.
Matty, walk us through what you're actually doing,
putting the hempcrete into the forms.
Yeah, so we've got our hempcrete in the buckets.
And what we need to do is first we're going to dump some in,
but it's a controlled amount.
We don't want to over pour.
This is a very controlled process where we build in layers.
So what I'm going to do is I'm going to put this bucket
on the edge of the form board, carefully dump some in here.
That's step number one.
Step number two is we rake it out level.
So we want to build up and even layers.
After we rake it out level, we then grab our tamping tools.
We take the long side of the tamping tool.
It looks like a little homemade tool right there, isn't it?
These are totally homemade, yeah.
Nice, Matty.
Yep, and you take these,
we put them right on the edge of the form board.
We're packing really firmly along the edge of the form board,
but we're leaving it looser in the wall.
Okay, and you're not like putting body weight on it.
It's more like a tamp.
Yeah, it's more of a tamp.
You know, this is kind of a marathon.
You don't want to do something that's so labor intensive
and you're pounding it too hard.
This is more of just you're stamping the edge.
Got it.
So when we move through this,
what you'll see is a stamped edge along the form board
and it's looser in the middle.
Awesome.
Let's do it, man.
Show us what to do.
And so you've got Deshaun on the outside and you on the inside
so that you're kind of even.
Yeah, we're working together on this wall
because we have these steel posts.
Yep, the sheer posts in the way.
A lot of times we'll fully sheet one side
and work from the other side.
Got it.
That's kind of a more efficient way of doing it,
but this is a little bit too far of a reach.
So we've now got this material in the wall.
I'm going to rake it out, spread it evenly.
And you're looking to go about two inches or so.
Is that what you told me?
Yeah, two inches is about where we want to be.
And you're just using your hands to kind of level it out.
There's no special...
It doesn't need to be perfectly level.
And a lower portion of the form board,
we can just stick this in and use this as a rake.
So I'm going to start down here.
We have a removable form board,
so we want to have a good tamped edge.
So I'll take the backside of my tool here.
Really press that in.
And then I like to use the long side of the tool.
I'm just going to work right along the edge of the form board.
And you can really start to see that stamped edge coming out.
So one of the things that is so noticeable
when you walk up to these walls,
Matty, they're so crisp.
They're really flat.
Your formwork's really, really nice.
My assumption would be however good or flat your formwork is
ultimately means however good and flat the wall is going to be, right?
Absolutely.
Form boarding is really key to having a good high quality finished product.
Yeah.
After I tamp the edge there,
and you can really see that stamped edge.
Sometimes I'll just take my hand and just gently kind of tap that.
Yeah, you're hand tamping.
Hand tamping.
And that's the process right there.
And then you're ready for the next lift.
Yeah, this definitely takes some time, doesn't it?
It sure does.
If you're not bothered with the random YouTube crew,
how long would it take for you to do a two-foot formboard section
like this normally for you and Deshawn?
Depending on the run, you know, maybe 30 minutes.
If we're really cruising, you know, 20 minutes.
That's not bad.
What really determines how long this takes is how much is in the wall.
You know, if we have electrical conduit and things that we're working around,
we really need to be conscious of that.
So we're working around it really carefully.
Makes sense.
So now you can see that when I dump this in, it's kind of gathered to the back.
What I want to do is just rake, pull it down the wall.
Okay.
Leveling it out and level being a relative term.
Yeah, it doesn't need to be perfect level.
And I'm also tamping pretty firmly over here because this green formboard is temporary.
It'll be pulled off.
I won't actually see the hempcrete return into our window buck right here.
Actually, our door buck, I should say.
And there's no release agent on these forms, right?
You didn't have to put wax or anything else like you would if it was a concrete form.
Correct.
We can just pull the screws off and this form will come right off.
People often ask how long until you're ready to move the forms.
You can remove the forms as quickly as you can form it.
Generally, we like to always stack another formboard on top of the formboard that we already have.
That way you started level, you're going to continue level up the wall.
We just continue level up the wall.
And this is basically just a half rip of plywood, right?
It's a two-foot sheet ripped in half.
Yeah, so we're using a three-quarter inch OSB, ripping it right in half.
But on sides that are less difficult to work around, we'll just take four by eight sheets.
We don't even need to rip them down.
We'll just go all the way up.
Got it.
Those walls over there were completely formed on the inside.
So we were all on the inside.
And so those big long runs, you're able to get a four-foot section in there.
As long as you can reach down in the middle of the form.
Absolutely.
Cool.
Now, what are those white wood boards in there doing?
That was a joke.
I was like, where?
That was a joke.
Guys, so cool to see how Matty and the crew from Hempitecture formed and poured this.
It is a beautiful cake that you baked here, my friend.
But the rest of the architecture here is pretty stunning as well.
What's going on with this house?
Give us the backstory here, Matty.
The backstory is that this is a Minka house.
It's a post and beam from Japan, about 350, maybe 400 years old.
Shipped over in parts and pieces and reassembled by a team of Japanese carpenters.
Dang.
These guys didn't have any electric saws.
They used mallets and hand saws.
So all the timber we're seeing inside, that's like 400-year-old Japanese timber
that some Japanese carpenters came in and assembled here on this Texas site.
That's right.
Now it's got a new life.
Wow.
Now who's the designer here?
So the designer is Axel Vervoet, a Belgian-based designer.
And he worked in collaboration with Mood Architecture, a firm out of Belgium.
And then also a local architect, Mel Lawrence Architects here in Austin, Texas.
Mel's a fantastic architect.
And then who's the builder here on site?
The builder is Chad Burnell with Earth in Motion.
Gotcha.
Man, beautiful.
This cedar that you're seeing on this porch, we see that all the time.
In fact, we're among cedar trees.
All those trees just to the left are all cedars.
Did you tell me earlier those are all locally sourced?
They were all sourced from the property that we're standing on right now.
They went out and found trees with the right caliper size.
They had an industrial pressure washer pressure wash the bark off of them.
So it is all from the property.
So all those posts and all the rafters are straight from this ranch that's right here.
Man, that's really cool.
What a story.
Tell me about a couple of details.
As I'm walking around this house, the first thing I thought was,
how do you install a window and door on this?
You're probably not going to take a screw into the hemp crude, right?
That's right.
Yeah.
So with our frame being inset to the wall or on center, as we call it,
we're going to use a flangeless style window.
That's going to be basically set into the window frame,
backer rod and sealed around it.
And the lime plaster is going to return right into the window.
So it'll be a real clean, nice looking aesthetic.
Gotcha.
That makes sense.
So you're going to use like a Schuko European window flangeless.
We're going to screw right through that jam into that two by four,
which is right in the center, which by the way,
it means we've eliminated all our thermal bridging.
This is going to be a really high performance house.
It also has some mass to it as well.
So that that thermal mass is going to want to stay the same temperature
as well as have a bunch of air pockets in there,
which are making that higher R value for the walls.
How do you insulate the roof on this project?
This roof is rather unique.
There's two layers of our product called hemp wool.
It's a fiber bat insulation made from plant fiber from industrial hemp.
Okay.
92% of the overall content of it is plant fiber.
There's two layers of that to reduce thermal bridging,
which is our 40 right there.
Then there's two layers of Gutex, which is a wood fiber board from Germany.
I saw that when I was in Germany at the Baal show.
That's not, that's totally almost unheard of here in America,
but pretty common when I traveled through Switzerland and Germany.
It's an amazing product and very insulating.
Yeah. And then of course, on top of that,
you've got this gorgeous cedar shingle roof too,
or cedar shaker roof, I should say.
I mean, it's going to be an incredible, incredible architecture when it's all done.
Tell me about what else you can do from hemp, right?
Because you mentioned you've got hemp insulation.
That's more like a traditional bat insulation.
Are there other ways that you could use hempcrete?
Yeah. So really the easiest way to incorporate plant-based building materials into your home
is probably using hemp wool, but there's other products.
We can spray apply hempcrete.
We source hempcrete building blocks from other countries that are making them on a large scale.
So we have these different options here in the United States that we can now start using.
I love it.
You've got a couple of mock-ups on site.
Let's go check out those mock-ups.
All right, Matty.
So you got a couple of mock-ups that you built before construction started.
Let's talk through these three.
What is this first mock-up?
So this first mock-up is using hempcrete building blocks.
They're mortared together.
This is actually a two-foot thick wall assembly.
A lot of R-value in that.
So how big is this block that we're seeing here that's made out of hemp?
The block is about two feet by one foot.
Okay. And what are you using to mortar them together?
We're actually using a hempcrete binder,
the same stuff that we're using in our cast-in-place recipe
we're using to mortar the two blocks together.
Gotcha.
And then what is this that we're seeing here as the final finish,
this kind of stucco-looking product?
Yeah. So this is a breathable lime-based plaster
that's usually applied in two to three layers.
And so this is a weather-resistive coating
that will last for the life of the building.
Wow. Beautiful.
And non-painted, it's all color integral, I'm assuming, right?
Yeah. Actually, you incorporate a little bit of pigment into it.
And so you can see we do have some kind of color swatches on this wall
where we've got different pigments incorporated into that final coat
so that it's tinted however the client desires.
Gotcha. Now, this is not what you built with though.
This is just an option.
And this mock-up is actually pretty similar to what you built with
or is the same wall assembly as what you used, right?
This is very much so what we are doing right next door in the Minka.
Yep. So we've got a two-by-four right in the center.
You can see in front and behind that,
we've got a couple inches of hempcrete.
So those two-by-fours are buried in the wall, so to speak.
But because that hempcrete is, I hate the term breathable,
but it's the term that we use, it's vapor open,
meaning if it gets wet, it can dry to the inside or the outside,
which really means that you could use this in any climate zone.
That's right. That's right.
And one of the amazing things about this
is that this has been sitting outside, unprotected, uncovered for over a year.
Oh, wow. And it's not breaking down.
You would think that there might be some degradation of the fiber
or maybe even, what's the word I'm looking for?
Decay, right? Of the hemp.
And that's not the case?
That's not happening.
And what we're also not seeing, which is huge, is no mold.
Oh, that's right. It's sitting out too.
And there's no mold and there's no decay.
Why is that?
Why is that fiber from the plant not decaying or not molding?
That's a really good question, Matt.
And the short answer to kind of a long question
is the fiber itself, the core, is petrified.
It is essentially made inert by the process of being mixed together with our binder,
which has a high alkalinity, making it resistant to mold.
And that organic aggregate becomes a lot less like plant matter and a lot more like a stone.
And that's also why you guys are wearing PPE, right?
You're not touching that with your bare hands.
You've got long sleeves on because that lime,
if that gets in your skin, is really going to irritate you.
It's in effect could burn your skin, right?
That's right.
And the other very critical element of that equation is,
you know, we're always making sure we have face protection on.
We're protecting our lungs, our nose.
Now, while we're mixing hempcrete.
Got it.
What's the last mock-up?
So this last mock-up is a little bit of a different sort of style
where we have a frame shifted to one side.
It's using a different kind of binder and hemp.
These mock-ups did kind of play with different types of binder methods.
But this was primarily done just to see what hempcrete would look like
flushing out to studs because we do have some partition walls inside
where we're just infilling in between the partition walls
as opposed to burying that frame on center to our wall.
But if you wanted to vary the way you did this,
on the outside is your full hempcrete that has plaster on it, right?
And that could be your exterior finish.
And on the inside, if you didn't want that, you could hang drywall.
You could do other wood finishes or whatever
and have your studs to the inside of the building,
which also would be a good assembly.
And this is kind of interesting.
Look, you've got a little mold growing on your wood,
but there's not that growth on the hempcrete as well.
You know, this does bring up one interesting question.
I saw in the building all the way around that your bottom plate,
that two-by-four treated bottom plate,
is wrapped with a, you know, a vapor barrier,
for lack of a better term, a plastic, asphaltic flashing.
Tell me about that. Why is that?
Yeah, that's a really good question, Matt.
What we don't want to have happen is moisture to migrate up
through the concrete into the hempcrete wall.
So it's essentially our damp-proof course
that's going to provide a barrier
between our concrete and the hempcrete above.
Right, so you wouldn't just pour a slab
and then go hempcrete right above that.
You always want something to stop that rising damp.
That's right.
And be a capillary break as well.
And then also that bottom plate's giving you the structure to land on.
And then I think you told me earlier
where you're seeing that protecto wrap
on the outside of this other building,
you're going to put a lath over top of that
and then the plaster will just cover that.
You won't see that.
It'll be invisible.
Matty, impressive, man.
Your crew, top-notch.
The architecture here, beautiful.
The builder's doing a great job.
So fun to meet you, man.
How can people get a hold of you
if they're interested in any of these products
or doing hempcrete on their project?
The first place to start is to visit our website, www.hempitecture.com.
We've got a lot of information, a lot of resources there.
We've got YouTube videos where people can learn
and see, is this right for me?
Is this something that I want to explore?
And feel free to send us a message through our website.
We'd be happy to get back to you
and learn more about your project
and how we can help you out.
Yeah, and also I'll tell you guys,
Matty's got an awesome Instagram feed
with some gorgeous pictures of this job site that I stocked.
That's one of the reasons why I got a chance to get out here.
Just to clarify, this is not a sponsored video.
We've not exchanged any money.
I just thought this was really cool.
So guys, go check out Matty's site.
If you're not currently a subscriber to The Build Show, though,
we publish every Tuesday and every Friday.
And oh, by the way, on Build Show Network,
we have five new videos a week.
So go check that out as well.
Follow me on Twitter and Instagram.
Otherwise, we'll see you next time on The Build Show.
