Are glue in bolts dangerous if the hole is dirty?

HowNOT2
100 followers
6 Video Views·Dec 2, 2022
Clean holes before installing glue in bolts! We did break tests that contradict that but you should still do it. Jim Titt’s article on glue in bolts http://www.bolt-products.com/Glue-inBoltDesign.htm which is also in our Bolting Bible which is on our website including the BoltBuster chart.
Live life high... safely. It's all FREE at https://www.SLACKLINE.com/
Is it okay if you put your stuff in dirty holes? Find out how compromised glue-in bolts are
if you don't clean the holes perfectly or at all in this case on this episode of How Not to Highline.
Hi, I'm Ryan Jinks and this is Bobby and we're going to break some more balls today.
Basically we have three fixed bell-shaped glue-ins that we did not clean the hole at all.
Let me show you what we got. So it kind of rained last night but this is just all the concrete
dust I guess. Feels like sand. I guess that's what concrete is. So we're going to blow this
away but we just want to show you that it is very very dirty. We installed all this last
night with Liquid Rock 500 glue and this is some very dirty holes. In theory this should pull out
the glue and if it doesn't that means we're getting full strength. These have threaded rods on them
which means it has great engagement with the glue and should not come off of the glue. Stainless
steel does not stick to epoxy very well. All right we finally... this is not her first try
making bolts come out of dirty holes. What happened to the concrete? Damn it.
Super coned out. Cracked all the way over to there. Oh that's cool. So you can see here that
the there is some glue stuck to the side there but all right I guess I could send this concrete
in to get tested for PSI. That's really cool. That's really neat looking. Anyways
it doesn't seem like it's gonna come off. That was everything that could fail failed there.
The glue failed. The hole. The cleanliness failed. The concrete failed. Okay okay I'm just...
this is awesome. I've spent a year trying to make this happen. So all right what do we get?
Oh geez. Can we just... 51.56. Can we all just be nicer to each other if somebody didn't like
super clean their holes? I mean we can kind of be mean to people who don't clean them at all
but I mean that that was pretty impressive. While Bobby is setting up our next test
go to hownottohighline.com. We've got the bolt buster chart on there. The slag snap chart.
Slackline groups with maps. Slackline festivals. Bolton Bible. Highline. Anyways we got a bunch
of stuff on there. You can learn a lot of stuff. It's all free. If you use all of our resources
and watch all of our videos, spot us 20 bucks. This entire channel is donation based and if we
get enough money we'll eventually build a drop test tower and do drop tests which will be really
really cool. Hopefully we'll build a big enough one that I can get in it because we do human
testing. In case you haven't seen our bolt buster system before, this is to pull things in tension.
Now why are we testing in tension you ask? Well I imagine that's the worst case scenario for
a hole that's not cleaned because if you pulled it in shear, well I just don't think it's that
big of a deal if this is not a big deal. What we have here is air goes into this pump and pumps it
into this hollow ram cylinder and then we've got I think a one and a quarter inch threaded rod with
this awesome thing and it lifts it up slowly so we can capture the slow motion. This is the
20,000 pound dyno that we recently got calibrated. Very very fun for nerds. And then we are going to
test some, this will be in another episode, some bolts that will be torqued to nothing or 100%
of specs or 200 or 300% of specs. So that's next on the agenda today. Normally we use our hydraulic
cylinder on this side in my backyard here. Our pump moves this in and out. I've got a seven point anchor
so this does not fail and the stuff in our bolt buster concrete does fail. And so far the concrete
is failing miserably. How not to demo concrete slaps. Wow. All right this one's going in the
slack snap museum. The slack museum. That is so cool. That's exactly what we are told will happen
if you don't clean the holes. So this is super dusty, right? You can see and that's why the glue
is not sticking to the concrete. It's very important when you drill a hole that you wire
brush it, blow it with air, and do it over and over about four or five times until like nothing comes
out. We just don't have this problem when we properly clean them. But clearly, even though
it's dirty, I'm shocked. Utterly shocked at 44.78 kilonewtons. All right, pretty consistent results.
The amount of force we got on that we'll find out when we look at the camera because
we forgot to push peak hold. We might try to hammer off this glue and use this bolt for another test
because it's in really really great shape. I assume it's in the 40s. It just kept coming
out in stages which is a little bit different than our last test. So on another day we did
tests with wave bolts in tension and twist bolts in tension. Basically the weakest ones,
yeah, they start to bend low. They're pretty strong. And then the strongest ones just to see
if the smoothness or the twist action gave it more strength. We're trying to get a cone,
a glue cone like we got today. Now we already made a video about the wave bolts coming out and we got
between 22 to 30 kilonewtons which is pretty good. But it just came out of the glue. The glue
did not disengage from the concrete. Now we're trying to tie in a concept into one video and so
we're adding extra break tests per video like you've requested instead of just doing three
per episode. However, I don't want to do so many data points that it gets lost on everybody.
But we did the twist bolts, pulled them in tension and they basically disengaged from the glue.
Epoxy does not stick to stainless or most metals for that case very well or like not at all. So
it goes crack and then it just basically untwisted out like it was a threaded screw.
But that also showed that the glue did not come off of the rock inside which is what it did today.
It took us a year of bolt busting to finally recreate what Jim Titt did. Now I love Jim's
tits. I love Jim Titt's holes. I love Jim Titt's dirty holes. Ah, I guess I can't tease the guy.
My last name is Jenks. Anyways, Jim Titt has on BoltProducts.com, he has a picture of bolts that
have coned glue, glue stuck on the bolt and have come out of dirty holes. And I thought that would
just happen every time if you didn't sterilize a hole. Because you're supposed to blow the dust
out, wire brush it, blow the dust out, wire brush it and do that at least four cycles. Which I still
think you should. But it was just so hard to recreate that. And we've got pretty high results
today. Put in the comments below if you think it has to do with rock type and the adhesion to that.
There was dust on my glue cone today and I don't know. This is just a discussion. We've now done
three sets of three tests in tension. Obviously shear is a lot different. We did not even use glue
on wave bolts in shear and it was pretty dang strong. Now cyclic loading might pull them out.
So please, please use glue. They're not pitons. Anyways, I will put in the link in the description
below to Jim's article on this, but that's also in the Bolting Bible, which has literally everything
that's on the internet in one place, nice and organized. So that's all at hownottohighline.com.
So I think it's interesting that we got between 41 and 44 kilonewtons pulling this one out,
22 to 30 kilonewtons pulling this one out and over 40 kilonewtons today. So
I still think we should clean holes. I really do. I just think we should be nicer to people
when they've taken the effort to put in bolts, not to be so mean if they didn't do it up to
the perfect standard. Let me put a disclaimer real quick, something I've actually personally
experienced. This is more complicated than a mechanical bolt to install. It's a lot messier.
You do need a few more things, but I have seen these. I've pulled them out from other people
installing them with my bare hands because the epoxy did not mix right. I think that's the
biggest risk when people are using glue and bolts. A dirty hole is the second worst thing you can do,
but a glue that's not mixed is basically just a bunch of gunk in a hole that's not holding the
bolt. And it usually takes for at least the epoxies I use a day to dry, many, many hours.
So you'd put it in and leave and not many people go back and check their work. So I like to squirt
a little into a Ziploc bag, maybe my garbage bag and make sure that what I put in that hole
was hard in the bag. If this isn't hard, that's not hard. It's very important to squirt out a good
chunk out of the nozzle before you start to fill up the hole because that first amount is not mixed
properly. And mixing is the biggest risk in glue-ins. If you liked this, if you don't like
this, make sure you smash the like button anyways and leave a comment. And I read them all. I just
don't, I can't respond to them all. And make sure you like, follow, and subscribe on TikTok,
Instagram, and Facebook because we'll post little snippets of brake tests
periodically in between our full episodes. Cheers.
