I almost bought a Ronin Lift Power Ascender for a climbing project and I would have ended up using the wrong rope which not only sucks to damage the Ronin and also your rope BUT if it shreds the rope and you are on a single rope system, then you die. Don't die because you didn't read the instructions! Mark Hanna obviously repairs them but also is an authorized retailer and you can buy them from his website https://www.swaymechanika.com/roninlift
This episode is not sponsored and I have no affiliate link with the Ronin. I was asked many times to make a video about them and Mark had good stories about what not to do.
So this weighs this plus this. Yeah. We are getting our Spratt certificate here at Mark Hanna's
Sway Mechanica. I got it right. There we go. Playground. And basically he's got Ronins
and I've never seen one in real life except literally right now. So we're gonna ask him
how not to use it. He actually repairs them and we're gonna find out why he keeps needing to.
Indeed. What is a Ronin first of all? The Ronin is a cordless battery operated personnel lift
and has a capacity of 400 pounds and approximately in good summertime weather when it's warm we can
get you know 750 800 feet of climbing out of the thing and it has a descent function as well. When
it's cold how much does that get reduced? Depends how cold it is. 32 degrees Fahrenheit. It's kind
of like a phone. Think of a like a phone battery or anything else with with modern batteries that
the battery life just is better when it's warm. So I think typically. Less than half or is it?
It's probably like 500 feet. Okay. Yeah. And can you take another battery with you or just have
them on the job site I assume? Yep you can have an infinite amount of batteries for and they're.
Or you limit that on run time because you can just swap them out. Yeah you just swap them out as they
get depleted. Sure. I almost bought this for hauling on rope jumps and just kind of like the
stuff I do but there's a couple reasons I didn't use it for what I was doing. So you have to feed
the rope in this doesn't open. Correct. You know how to open them. Yes yes. But you're not supposed
to open them. Please do not open them. Okay and then this is the handle this is the spout and
what's the eye for? The eye is another rigging point you can okay essentially hang these upside
down either way. They'll go either direction. Yes. Okay. They're they don't really care which
direction the load is going through the device. This is the motor which is kind of what makes
it feel a little awkward in my hand. Four and a half horsepower. But I don't have the battery
installed will you install the battery for me? I will. Fancy. It's uh how heavy is this? 25.
I'm getting weak. So it goes through a little diagnostic program when you put the battery on
and those are the the noises you heard that's an indication that it's operating normally. That's a
good thing. Okay max battery clip load 5.5 kilograms. What's that mean? Oh don't clip to
this. Yes. Oh that's like a tie-in. Like a little leash for the battery. Correct. So you don't drop
it 30 stories. Right. Not a rigging point. Definitely not. This sure looks so similar to this.
Okay now what's what really stirred this uh episode was I watched episodes about this before
I almost bought it and everyone just makes it look so easy and they go but you told me
people get things stuck in here and you had issues and you became a repair guy because
nobody around this Pacific Northwest area that repairs these. Correct. Well what happened to yours?
What do you see now? Well I think that it's um you know a lot of folks have a myriad of different
ropes uh in their in their stockpiles in their kit and they're tempted to just put any kind of
rope in this and that's a that's really the main mistake that people make. Um it's it needs to have
a specific uh sheath configuration 32 carrier or finer so it's a very smooth sheath. This is a piece
of uh Tufelberger uh KM3 max and you can see it has a very very fine. And you said this is different
than KM3 normal. KM3 is different than KM3 max. You have to have a KM3 max. Or other approved
ropes. There's a whole list of approved ropes. This is one of them. Now sometimes I don't always
read the instruction manual. If I do if I decide to do if it's like in cartoon form like Petzl has
I've learned that I can bend some rules and I think some people think they can do that with this.
What happens if you bend that rule? If you bend that rule and use a much a coarser sheath
configuration uh it actually this device does a good job of really pressing the rope and
applying friction to it and it can take that um more coarse sheath and literally open up that
sheath and let the it'll press the fibers of the core out and that that essentially just rips the
rope and wraps it around the axle. So are you stuck or is it just desheathing as you go up?
No it will just get stuck. So you're stuck and now you have a section that's
just showing the core. It destroys the rope yes. While you're on it. Yeah so it's very important
to use the correct rope. Very important. And then you have to cut the sticker that says don't open.
Yes. Open it up. Do you have to replace the guts or just clean out the the mess? Uh depends on how
long they kept pressing the button apparently. Because it'll grind the gears. Yeah it it can
being a four and a half horsepower motor it can do a lot of damage to the metallic components
inside. So this is a portable uh shredder. It can be with the wrong rope or if you uh
don't prepare the rope in the in the right uh manner leaving. Meaning what? Leaving a a taped
rope end or any any sort of tape or debris or anything like that on the rope that also gets
stuck in there and and uh defeats the the operation and damages things. What was the weirdest
thing you said got stuck in there once? Uh most recently last week a a plastic garbage bag and
you know it was a warranty return. So I opened the thing up and and here's this. How do you get a
plastic bag? Where why is there a plastic bag on this? They were trying to keep the unit dry
reportedly. Is that like a concern? Are these waterproof? They are reasonably waterproof. Okay
because it sounds like something I would try. But you know you got what sucked in the hole? Yeah
yeah and just spun around. I keep putting my finger in this. I have a feeling that's just
something I really shouldn't do. Is that also the instructions I'm not reading? Yeah probably. All
right so this is without the motor. That's this is without the motor and really this is a a black
box kind of device that you know has mystical parts and pieces inside but but really it's it's
pretty simple device. This is a drive shaft. This is what actually applies pressure to it to the rope
and this is a channelized path for the rope to travel where it gains that friction and basically
gets spit out through that side. Oh through that hole right there. Yep. So it goes around and then
up? It goes it goes around and then out. Oh it's going in three circles. Yes there's actually oh
wow three three uh paths that it goes through. Does that twist the rope? No. Interesting. I could
see why that would shred it. Yeah it's a it's a tight tolerance fit so debris and extra stuff
in there. 10 and 11 mil or is it like just one diameter? I believe this uh newest updated model
is 10 to 13. Oh it has a range? Yeah. Of diameters but not a range of type? No. It likes smooth? It
likes smooth. Um and why all this empty space? Uh those are parts that aren't aren't in there
right now. Oh gotcha. Yeah there's a tension an entire tensioning mechanism and a essentially a
brake shoe that that pushes up against the rope. Okay I thought that's where the plastic bags get
stored. And that we do store plastic bags, pine needles, debris, rocks, dirt. Uh is that what's
yeah yeah there's some other parts in there. I like seeing how stuff works before I trust my
life to it even though I'm sure it's been tested a bunch. Where's that go? That's the uh tensioning
mechanism that essentially goes in here and presses against the rope. So it's got an adjustable
tension knob right here that applies tension to it. And that's moving that device or that component?
It essentially um presses on the rope more vigorously. More vigorously and the rest of
these don't look that important. So how is this rope prepared? This rope is prepared uh there's a
written and video instructions on the Ronin website um on how to properly do this. Essentially
you extract you you make a clean cut in the end of the rope with no tape or all of that stuff's
off of it and extract the core out cut about a half an inch off kind of re-milk it over the thing
and then melt it at the end into a tapered bullet looking thing. You don't want it getting fuzzy
like some ropes. Right yeah we don't want you don't want to cut it an angle tapered. No no it needs
to be this kind of tapered. So you have to listen to them? Absolutely. This is one of the one products
I feel like I really should listen to. It's very important to do that because if you have a bunch
of loose mess out at the end it's just going to get sucked into this yeah wonderful device and
wrapped around that bearing and axle and destroy your new machine. And then they have to call you
so you're trying to put people out you're trying to put yourself out of a job. Please. You have
other stuff to be doing and fixing people's whoopses. Indeed I have a lot of other things.
Because their newest updated version two or whatever you call it isn't having issues outside
of people misusing it. Correct. Cool. We've come a long way it's good. Cool. So loading the rope
the battery's on we're showing green light and really you put it in here excuse me we've got a
little instruction turn knob right to load the rope turn knob left to ascend so we're just going
to do what they say and we're just going to turn the knob to the right read instructions for use
and we don't have to crank it down to the point where we're feeling like it's becoming super
difficult but we want to get it snug and to the to the right to load it and then we simply grab
this the dead man switch back here which allows this in a enables this thumb wheel switch so we
see that being drawn in there we go thank you yeah you see it it tapped that did everybody see
that okay yeah we'll be roll it later yeah you'll you'll draw the rope in until it touches that then
you reach over and just simply pop that out looks like a noodle maker it's a noodle maker
so in doing that it in it sucked in the rope and went around three times and spit it out
under tension so we're still under the loading tension which is very low right now
so left to ascend once we want to put our loaded weight on it we turn it to the left
and it tensions against that rope and doesn't allow it to freely spin if you ever are using
this device and note that the rope is not moving but the motor is running stop give it more tension
because that's really hard on your rope that's a lot of the early users of this equipment
you know it's kind of a finesse thing and you have to get used to how that works so we want
to get all the slack out of it because yeah or do we do it over there you can do it over there
and just drag this over oh that's nice that's it hold on don't tell me i should have a backup
you definitely need backup this is not a piece of uh personal protective equipment
it's not rated for uh impacts for catching falls we need to have a separate independent
rope access style backup which would be this other very cheap piece of gear called an asap
indeed okay so i want to connect to this to my eventual loop here is that correct correct do we
want to swivel oh do i want to swivel you can use a swivel um the swivel is kind of nice because it
allows you to as you notice that motor kind of juts out on one side it's nice to be able to
if you're coming up against an obstruction just to kind of swivel it out of the way
very simply and we have swivels um they are in i am attached do these need to be rated for
anything specific uh some swivels are some swivels aren't and i'm going to trust my life or half my
life it's a life supporting object so it should be rated yes and this one's rated cd anything
40k in that should be plenty for the intended application just because they stamp a number on
we know that so that puts it a little further away but it's still within do i have to to feed
it out or i didn't let it spit up in the upward direction you do not have to mind this that's
going to mind itself that deadman switch is very soft yes you want that you don't want to i don't
want it to be hard but like on the booms and stuff right a little different so just a quick note um
this is the up direction yeah is operating the thumb wheel in the down yeah and to come down
you control this just like any other descender or braking device with your let's say your right
hand if you're right handed here and operate just kind of reach down and back behind this to operate
that descent lever so if something happens in the device and it starts to slip
um and go fast or something the automatic cam in here engages and stops you but it's also a descent
is the motor get really hot i should be careful not to like touch my arm
that's fine no i've never uh experienced that even with long climbs you know three or four hundred
feet why does it go up just a little and then not so down to go up so it's down so the up feature
doesn't do anything okay down is up and up is nothing oh god oh wow that's fast oh you got to
really mind your backup that you do okay so if you put the backup over your shoulder i can hold
it and it will it should i gotta keep it at the right angle should i lift myself up into this
put your back up up there we go up over your shoulder
oh you're gonna hold it tight for me i'll give you a little challenge i see what you're doing
oh come on oh wow that's so much easier than what we've been doing for a week
wow okay so i want to mind this yeah so the tension knob the red tension knob actually can
give you less speed or more speed on your descent
based on your body weight whatever you want okay
wow so it's an unpowered descent
wow that is fun to go up without like any work the only time i've experienced that is when we're
rope jumping and we have like 15 of your friends hauling you back up yeah it's pretty effortless
so i could tell like if you're if you're under something you can you can there's a way to screw
this up it's it's a very powerful device you can hit yourself yep you have to be careful with it
does it chew your rope up not if you operate it properly use correct tension and the right rope
it uh i get great great use out of uh this rope and any of the approved ropes are and you get uh
you'll get 800 feet out of this guy oh yeah what happens if you're being dumb and you and you
you go up against your knot right because i was within like
two meters of my thing if i just kept going and i wasn't paying attention so so the device has a
400 pound capacity at about 500 pounds it enters into a fault mode so it'll make some noises and
the battery starts doing a yellow caution kind of flashing thing it will grind the rope no it'll
actually stop it'll slip it'll stop it'll just stop and then it's up to you to engage your descent
because you don't need any power to descend with it gotcha and it'll it'll uh which is good if your
battery dies right absolutely that's a good design um cool well thanks for sharing about
how this works because a lot of videos made it look they only showed the cool side indeed
details just needs to be uh properly outfitted and and uh maintained they need to go in for
annual service uh to replace some of the wear parts and uh keep up on it we don't need to
all of his clients already have so and they're expensive so you're welcome um now we'll go to a
story where somebody has actually used this and destroyed it themselves story time yes hi i'm
andrew and uh i have a story uh more of a life lesson about the ronin um i am a window washer
and this was our first time using the ronin it's me and another guy and he was down in the
street level and i was up on the roof operating the uh the ronin lifting him lifting him he does
not have the ronin on him no okay so i have the ronin on me and i'm operating it so we're
communicating through our phones and he gives me the green light to ascend him and as i'm ascending
him uh the ronin starts kind of going haywire it starts broke kind of starts jamming up
making weird noises not moving and then kind of shifting down going back up and then just
completely stops and so i'm kind of freaking out and i give i call him back and i tell him you just
need to get down right now and so rappels down to the ground comes up we inspect it we're yanking
on the rope a little bit and just the rope pops out just completely like blown in half and uh
it it grounded to pieces just grounded to pieces and then we the rope that he was hanging from
was just wedged in between the teeth of the rotor because the tail that came out was was
not connected to the it was not connected whoa but he was able to rappel to the ground using
his backup his backup because they have two ropes in industrial access you have to and well it's
so why did the ronin eat your rope for breakfast uh it was the wrong rope uh so we we thought we
had it down we watched a youtube tutorial the night prior and uh yeah it was just it was the
wrong rope brand new 600 rope we haven't used before and just was the wrong rope and you had
to repair your ronin we had to repair the ronin and we had to get another rope another rope and
you and another guy yeah did not we weren't able to make money that day we did not make money we
had to go home sounds like an expensive lesson if we save you an expensive lesson click the
thing that looks like this and uh make sure you use the right rope cheers