First off…I’ve never claimed to be a car expert, so when a family friend called looking for help after no luck locally for 6 weeks, I said I’d come see how back it was. Three shops in Phoenix told our friend they had to pull the engine to fix a stripped head bolt. My brain just couldn’t wrap my head around the auto industry not having a solution for one of the most mass produced engines in America… a Chevrolet V-8 from a Camaro. A 6.2L GEN V LT1 to be exact. COME ON!!! There’s no way you have to pull the motor, someone has to have figured it out. 2 mins on Goggle and I found this gem of a product. The NS300L kit. We ordered one in and show the process. What a well built and outstanding product. We see they even have a Polaris kit!
Time Stamps: 0:00 Subscribe and Time Stamps 0:16 The phone calls to shops 2:40 Intro to the kit and what’s included 6:00 Installing the alignment jig 7:22 Drilling into the head (no stress) 12:15 Tapping the head for the new insert 14:55 Insert considerations and info 16:23 Not quite enough. First depth check 19:05 Close up of the insert installation and tool 20:12 Success Passed inspection and how to depth test 20:30 Clean and prep for final installation 22:46 Final tips and summary 25:28 Upcoming video announcement for a super charger installation!
Want $200 bucks back free? Apply for a Chase card here: https://www.referyourchasecard.com/18f/NC7O5JFI7F You can earn $200 cash back with the Chase Freedom Unlimited card or the Chase Freedom Flex card.
New! Earn 5% cash back on grocery store purchases (not including Target® or Walmart® purchases) on up to $12,000 spent in the first year.
If you hit that subscribe button, that notification bell,
you're going to be missing out on videos and free prizes and raffles we have coming up.
This video includes time stamps, so check out the description below if you want to
bounce ahead and just grab the info that you want. Hey, check out this little re-enactment.
Hey there, yeah, I'm a local phoenix. I'm a young kid trying to turn some wrenches. I
went to trade school and I really messed up. I stripped a head bolt in my block. Can you help me
out? What, what, you want them YouTube mechanics? I mean, what, like, you think you can work on
your own cars? Like, this is what you get for working on your own stuff. You know, we,
we're not going to fix your messes. What'd you do? Oh, you must be one of them YouTube mechanics,
you know, trying to work on stuff that you, this is what you get. You're going to pay me
thousands of dollars to fix your mess up. And that's the way it is. Yeah. And pull your motor
and bring it in. You ever find yourself in that place where maybe you just feel like people are
talking down to you or just not giving you solutions. And you kind of wonder, well, is it
because I'm young or is it because I'm old? Is it because I'm female, male, I'm straight, I'm gay,
I'm trans, I'm blue, I'm white, I'm Asian, I'm Indian. What, whatever that case would look like,
uh, man, how to wrench has a different way of viewing things. And I'll tell you, it hasn't
always been perfect. I mean, when I started teaching early on, I think I fell in a little,
what I call the shame game too, of like, well, you don't know that or, or whatnot. So I really
grew to know that I don't like the way that feels. And I'm, I want to be open. And I think
why I love teaching so much is to give people that opportunity to have a bad first day. And so
if you ever find yourself in a position like this, where you thought, Oh, what am I going to do? This
is really bad. I've been there. Most of us have ever turned wrenches have been there. So we want
to welcome you to how to wrench. And our videos are really based on the fact that you might know
a little, and you might know a lot. So everyone is welcome here. So this is a cool little video
has a nice outcome of how we were able to help a young fellow that fell into a position where they
were like, you know, pull your motor or they wouldn't do it at all. He was really, really
struggling. This vehicle has been down for a long time, trying to find a solution. They asked me
once again, never claimed to be a car expert, but I know about tools and nuts and bolts.
And so I went and took a look and I got to thinking this cannot possibly be the first
time somebody has done this, found this really cool kit. We're going to review that tool,
show you how it worked out and, uh, and help a young kid out to keep them excited about
turning wrenches. And, uh, I'm pretty sure he's going to end up with one of our YouTube shirts.
So anyway, make it a great day. Enjoy the video hit that subscribe button. If you haven't done
so yet, let's get to it. Hey friends, Shane from how to wrench.com. And I got a request from a
friend of the family to help with a automotive job. And I never claimed to be an automotive
expert, but I do think I know my way around tools. And we have a super sick project here.
This is going to be a pretty bad-ass Cabaro. And, uh, you've been having a lot of fun building
this car up, huh? A little too much. Yeah. And you went to Westmac, right? I did. So if you,
if y'all haven't heard about it, I'm on a, uh, I help out with the motorcycle side of that here
at Westmac. And every time I talk to someone that's went through one of them programs, I mean,
it's been awesome. So here we have a graduate, you know, living life, loving life and look,
he's, uh, getting after it. I mean, put some high performance parts on here.
This thing's pretty cool, but we ran into a situation where he went to torque his heads on
that, uh, one of the bolts, uh, pulled threads. I know first people, first thing people are going
to ask is like, was he using a torque wrench? All that, this kid, no offense, sorry. I shouldn't
probably call you a kid, but, uh, is super organized, really digging it. Love what he's
got going on. And this ---- just happens, right? I mean, it sucks and it is what it is,
but you went to a few different, like, uh, machine shops and everybody was telling you,
like, pull the motor and bring it in. And they reached out to me and thought, is there anything?
And I really didn't know either, except to use that good old Google and start looking around.
And we found what I expected to find was a solution. This is way too popular of an engine
that's been around forever. And you always ask yourself when you get into trouble, like,
am I the first person ever run into this? It's pretty hard to have a first experience anymore.
Because everything's just been an evolution. And so as expected, there was this unbelievable kit
for, uh, perfectly aligning up the tap and putting in way better than a Healey coil.
Cause originally we were talking to Healey coil and I was like, love Healey coils. Just had to
do one last night. Matter of fact, an engine I was doing, but when it comes to cylinder heads,
exhaust, uh, I'm a huge fan of an insert, uh, style repair. And so we found this kit. We kind
of want to give them a shout out here. This is the kit, right? I'll even give you a refrigerator
magnets. Yeah, there you go. Um, but this thing's pretty wild. You're going to see here. We're
going to use it here in a second, but it comes with an alignment jig. We're going to Mount up
comes with multiple taps. They even went to the extent of giving you the tap to start that shorter.
So it's not, you know, going to walk out on you. Fantastic instructions by the way. Uh,
then once you get deep enough, you could switch to this longer tap. Now that you've got a good,
you know, guide started in there and then we can get as deep as we need to go.
Was this your blow gun? Yeah, this is yours, but it did come with thread cutting oil. It
came with a thread locker. I mean, this thing's wild, super, super wild. So I brought just a few
hand tools that I like, like tap sockets. I'm a big fan of those. And, uh, here's the thread
insert. Uh, and some of the other taps that came with were not for this model, but it was,
was all included. So super thorough instructions. So I'm going to quit yapping and we're going to
go ahead and we are going to fix that hole. I really dig the tape job. You did too. Pretty
sick man. All right, Peyton, let's do this. All right. Per the instructions were to use
this small spacer on our motor, use an existing head bolt. This one's going to grab onto good
threads. And then this is a really cool tapered guide. That's going to go in here and, uh,
perfectly set the jig up for us to then switch this out and do the drill process. So
thread this in here. If you have a second hand, like I do, we're going to use it. We're going to
take advantage of it because what we want to do is have me push the block down and the pin down.
And then, uh, I'll let you switch and start grabbing that. So this creates that really
nice flat surface. And we're not torquing this, uh, adapter either. It's just a,
uh, tight fit. It said per the instructions.
Okay. And now what we have is a hole ready to drill a hole in a block installed in the car.
No stress whatsoever, right? All right. Now that, uh, this does come out nice and easy,
let's give it a little more snug. Feeling pretty good. All right. So that is first part.
Yeah. Look at that. Okay. So what we want to do next, we just don't want to drill this wildly.
We want to think about how far we do want to drill this just because we haven't used this kit before.
So what I like to do is put a, I'm going to measure this. Uh, I believe it said to go two
inches. We should look in the instructions again, but I like to do is just, uh, if my goal is to go
two inches, uh, beyond this block, I take and mark this off. So it might be the whole depth of this,
but let's see. All right. The recommendation was to go two inches and then quit and then,
uh, check your work. What I'm going to do is I'm going to just take my caliper here,
zero it, switch to inch, and I'm going to go to, uh, the thickness of this clamp.
Okay. I'm going to hit zero there and then I might add two inches.
So the thickness of that clamp and two inches has us going right. Actually, I'm not even going to
have to tape it, but do you see where it goes right to the end of the spiral? Yep. So when we
hit that, we know we're going to be two inches and then we can blow it out. Actually, we're going to
use another cool tool, a little vacuum tool. We'll suck it out and then we can go down further. So
pretty sweet. All right. So you get a little, can you tell if I'm in the camera? Yeah, you are.
All right. Point of no return. Ready?
Okay. So I want you to watch that bracket, make sure we're feeling good.
Upside down.
Okay. You want to make sure we're started on the head, not drilling the bushing, right?
Let's get that a little tighter. I saw it moving a little, which might be normal, you know, but
let's get it.
Just making sure you got one shot to do it right and
one shot to do it wrong. Okay. Just per the instructions, we're going to quit at the two
inches. Yeah. Do you see why it's jamming the drill? This is a cool tool I want to show you.
It's a vacuum off using compressed air instead of blowing it. It works really good on the surface.
It wouldn't go down to the full depth of the hole. So he still needed a blow gun, but especially
when you're doing cleanup or whenever possible, if you can vacuum versus, you know, blowing it,
it's a lot less risky and less dangerous for you as well of having ricochet. So yeah, you got,
you're always going to need a blow gun, but this is a real cool tool. And I'll put an Amazon link
down below, but it's great for like getting in crevices and areas instead of just like,
you know, wedging it into something. So use it as you can. So I can't stress enough the pro
tips of stop, take your time, look at what you're doing. So take a little breaks and check things
out. We we're going to keep on drilling and then it's really good to have this extra set of hands
as well to keep some of the lines and stuff out of the way. So your drill doesn't catch.
And then you'll notice here in a little bit that we actually oh, don't forget lube, lots of lube,
lots and lots of lube. You're going to notice here a little bit that we discovered there was
an open hole that wasn't taped off too. So just checking your area out really, really well will
save you a lot of problems. So there, we just kissed it down to where we thought was a good
point. You're going to see it here in a little bit later in the video that we actually need
to go deeper yet, but hey, baby steps, you'll get through it. And then let's keep on moving.
We're getting close. We're going to switch over to the tap now. So the next step is we're going to
switch to the bushing that supports and starts the guiding of the tap. Now, once you get through
the full length threads of the tap, this bushing doesn't serve you anymore. We learned that later
on, but absolutely necessary to get started really nice and straight. Now, if you've never seen these
before, these are tap sockets. They come in a, you can get these in a whole bunch of sizes,
all the way down to small ones. They are instrumental in making this so much easier
than using a big T handle. And then you get the ratcheting. So if you're in a tight spot,
I'm a big fan of using like a T handle. We just didn't have a three quarter inch required for this
with me. So that's what we got. All right. We're going to put some, uh,
like the instruction said, we're doing the short one first.
And when doing, when cutting threads like this, did you do these in school though?
Okay. So I want to make a couple of points here. If you're not familiar with, uh, you know,
how to use a tap, I mean really, uh, watch some of our videos in our faster playlist, or,
you know, just get on YouTube, find some good, uh, content creators and make sure you get a
understanding that this, this video is really about how to use this kit and how it fixes this,
uh, what seemed like impossible problem, uh, avoiding pulling the engine. So, uh, you know,
a little bit surprised, like, uh, where, you know, Peyton had said that, you know,
this is something they didn't learn school, but on the other hand, not super shocked because it's
just not such a common thing taught, uh, in the schools, uh, anymore, but you know, uh,
real quickly, I mean, you'll see, I'm going forward and I'm backing up and going forward.
That's because I'm going to make sure that that material doesn't just bind up in a pile,
especially when you hit the bottom of the hole, we don't want to have all that material just stuck
in the bottom. The tap has nowhere to go and we keep in, we don't want to bind it up with so much
material that we could take a chance of the tap breaking in the head as well. So there's a couple
of pro tips for you there. And then, uh, like I said, you're just going to see us. I'm going to
fast forward this to, to speed things up, but we're just going to keep doing this and keep doing
this until a point we're ready to, uh, to see if we've, uh, hit bottom as far as we drill.
And while he's doing that, we are at the point where per the instructions, we've threaded the,
uh, insert down in there. You can see here, it's got this little notch on here and this is the,
uh, installation tool and it says to put it in, uh, by hand first without the thread locker,
just to make sure you don't have to keep going. We have had to go back and forth a couple of
times and work on getting this deeper so that we can get the installed height from the cylinder,
uh, base, uh, to the deck surface is what they call it, to the top of this insert. They give
a specification for your model. In this case, it was 55 millimeters that the top of this needs to
be setting at. The reason that's really important and Peggy, give me a head bolt. Reason that's
really important as you look, this kit is so intentional that it's going to use up all of it
for that, that clamping. So if you didn't have this deep enough, what would happen is you would
end up hitting right here and getting a false torque because you don't have threads. This isn't
neck down. So if, if, you know, if we were like, this would be better off than this. So it has to
be deep enough. And that was a real concern for us as we were, we, we were actually only at 25,
I think 25 millimeters or so at our first, uh, check. And we realized, oh, we got to get that
thing deeper down in there. So that's what we're doing right now is we're getting the tool out
and we're going to measure down from there to the, to this edge and see if we're at that,
uh, 55 millimeter spec. Okay. I feel we definitely are bottom. So it did, did fit. Now
we hit set this up.
And look, we have a little bit, a little bit more to go. Actually, that's the point. We gotta,
we gotta get this right. So we get a, we get a couple more threads. We gotta get after on that.
All right. So here's the thing, you know, a couple of things we discovered is,
is once we had that tap all the way down there, we really didn't need the fixture anymore. Number
one. And number two, uh, we probably were just way over cautious, but no regrets. This beginning
to process end for us took about three hours, but that was screwing around, making videos,
you know, chit-chatting a little bit. So, um, like I said, I, I think we could have done a
better job of doing, uh, more measuring and really figuring something out in a few less steps, but
this is, this is how we did it. All right, here we are taking out the tap again, uh, after grabbing
a few more millimeter to hit that 55 millimeter spec. So I thought I'd just let the camera run to,
uh, show like up close the full installation of, of an insert. Let's, uh, blow that out again.
Here, I'll do this since I got glasses on.
I'm gonna lube up the insert, just make it easy right now. This will be
Loctite on the final, but like I said, I'm gonna start in here with this
key, like that. Uh, let's go ahead and take our, uh, block off actually.
Look at that. That looks kind of wild coming in from that surface, doesn't it?
Oh, those threads are great.
And the reason we need that brake cleaner was when we go for final assembly, we got to get
everything just all the way back to nominal, completely dry. If there's any oil on there,
that thread locker is never going to be able to cure and do what it's supposed to do, so.
Fuel.
Boom. Look at that, dude. Awesome. Give me some knuckles. Cool. All right, so now we need to,
uh, take this back out. The next steps are really crucial for the success of this repair,
and that is super clean. So get some brake cleaner in there, get it really good and dry,
blow it out, get all the old chips out, get it really super, super clean and dry,
and then you have to remember to do the insert, uh, as well. If you, if you only did the, uh,
block and the insert had oil on it, it still wouldn't allow the thread locker to cure,
so super clean and dry and ready to receive this nice and easy. Oh, Jesus. That's good.
Uh, just get it away from the top, like more that direction. Yeah,
perfect. That's good. Okay, you're not bleeding.
Yeah, good luck doing that with helium coil. Four inches deep.
It's really some nicely machined components for this.
And then we always want to check our work. Let's check our depth, make sure
just something hasn't changed, right?
Then the big thing is to make sure and let it cure. So read your thread lockers. You know,
typically you have a cure rate of like, this one here says approximately 20 minutes and it's
fully cured within 24 hours. At the point of a cylinder head being such a critical mass component,
I wouldn't go in to torque that bolt until tomorrow. I'd let it sit for 24 hours. So,
um, that is it, man. What do you think? Super fun. Cool kit. Um, let's get a little overview of all
this again here too. So what's, what stands out from this? Anything new from like lessons you
learned in school or anything? Yeah. You know, in the power sports industry, we, we've had,
you know, aluminum blocks forever. So it's been pretty textbook for us to, to have to know how
to do this. But I'll be honest with you is that all over the country, anything to do with
fabrication has been pulled out of curriculum. They're pretty much figuring out, we only have
so many hours in a day and they're going to teach you tires, brakes, you know, uh, some basic fuel,
electrical things like that. But the, the stuff like this that they say, go to a machine shop
in the real world, it's not that easy because you get answers like you got, oh yeah, pull your
engine, bring it in. We'll, we'll fix it. And you're like, wow. I mean, think of the work
to pull the engine. Now this, what this kit cost? $450, you know, to your door. And at first,
you know, that kind of butt cheeks tighten up and you think, oh, and you know, you look at the
Healy coil kit at 30 bucks or something. And it's, it's just not the same. You know,
what this allowed us to do is to really work with constant out. Let's just be honest. I was nervous.
You know, were you, you were definitely nervous too. And I've been turning wrenches for a long
time. So we took our time. How many times think we read the directions? Yeah. Uh, we just,
we really worked through this and I can't encourage it enough for do it yourselfers.
I'm really transparent on, on what I'm really good at and, and what I want to be careful with.
And when it comes to using a kit and I would call this a trick, you know what I mean? This,
uh, because you know, the, the quote unquote standard manual way would be to pull the motor
and take it to a machine shop. So anytime you're using someone else's, you know, idea or kit,
you don't make sure and really study it thoroughly. This would be a big mess up,
uh, if you did it wrong, but I'm super stoked about this. This was a fun little project
for me as well. And, uh, we'll put links below to this, uh, this cool kit and, uh, we'll let
you get to putting the rest of your car back together. Hey, watch for a future video. He
says he's going to let me know you've got a supercharger coming for this. Yeah. And so you
said there's something special about the size. Yeah. It's the brand. So this car is, it sits
from the factories. How much horsepower and you're at without the supercharger, what do you think
you're at? 500. Okay. And with this supercharger, what are you going to be without blowing up my
engine? I want to go for a ride. You'd put it on track, man. All right, man. Hey, everybody,
if you haven't done so make sure and like share, subscribe, all that good stuff. We'll take a few
photos from just assembling this, drop it at the end of the video, but as always keep wrenching.