How to install transmission circlips correctly. The direction of installation is crucial to the intended design to secure a gearset location. Installing this wrong can allow the circlip (snap ring) to push off and lock two transmission gearsets simultaneously. Common text used in manufacture recalls is this: IF THE CIRCLIP BREAKS, THE TRANSMISSION COULD LOCK UP, WHICH WOULD ALSO CAUSE THE REAR WHEEL TO LOCK UP. THIS COULD RESULT IN LOSS OF CONTROL AND A CRASH WITH INJURY OR DEATH. We have many more videos we have on transmission inspection and rebuilding. Many are free and members can ask for links to specific needs! Join today. Best $2 spent on YouTube! Note: Due the the seriousness of this information, no time stamps were made. Skipping one part could lead to a loss of understanding needed to apply all the information together. Tool Links: https://amzn.to/2Ujfu5F Use these tools links to support How2Wrench and know we use the same tools as seen in the videos! Join this channel to get access to these perks: https://www.youtube.com/channel/UCBhM8DCKnT3qXwTW0eToyCg/join -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways One on one Techline: https://how2wrench.com/ols/products/techline-one-on-one Below are some links that help support me and my work. Keep Wrenching, Shane Conley Instructor/Motivator/Motorcyclist
Hey how to wrench fans we are gonna make a quick video here on these transmission snap rings if you didn't know they're actually
directional that there's even been
lawsuits and deaths of people putting these in backwards and cause the transmission to lock up so watch this video so you can learn how
to install these correctly
And then we started out in time stamps so a lot of the videos you can jump around and get right to the information
You want and then we even start adding captions so you can pick your language. Enjoy the video
Came from how to wrench.com and we just got done
Inspecting this transmission for our motor gym kind of bike. We've got some fun videos
They're be coming out on that. But what we're actually doing is is building a GSX or 750
It's gonna have a single transmission speed just first gear and the ability to take it out of here
Teach my buddy Kenny here who it's gonna be his motorcycle about you know
Some things about transmissions and as we looked into it
It wasn't right and then the next one wasn't right and I saw Kenny's eyes kind of go
Oh, are we sure and so well, you know what?
Let's just go to the manual like the manual is always our source of truth
So let's get in here Kenny kind of tight and we'll talk about a few different things
We saw so as we were taking it apart
You remember where we were I was pointing out these holes and talking about how we want to line the holes up
Remember talking about that, right?
So let's just take a look at this
I'll pop this one off and just use it for example here if this were the large diameter that would fit over here
When I slide that on I'd want those holes to line up
Okay, that's gonna be important and you can see here in the manual they even call it out
They talk about you know, making sure those holes line up and what happens there this bushing doesn't slide back and forth the gear slides
This bushing has a freewheeling gear like this. Okay, so the one we took this off
This sits in freewheels
Okay, so this is just spins on here
Okay, we're gonna lock it in with this gear to lock it to a fixed gear, but that spins
So what we want is when we feed the oil through the transmission here and it comes out that hole
We want it immediately to line up with that hole so that it can lubricate the gears need it
Okay, there's clearances in here and it's gonna eventually get around there
But I was kind of telling Kenny here that this is where a lot of people kind of get lucky with
motorcycles ATVs power sports
Transmissions if they don't get road hard enough or abused they might not ever see the problem
or for miles to come
But if it even gets used slightly hard or whatnot and we need that oil there that oils demanded there
We are gonna have a problem. Okay, so that's one thing to think about
Okay, the next thing that we want to think about that's really crucial there have been
Recall campaigns from different manufacturers where they got this wrong
I know of cases ever there were lawsuits where people even lost their lives
This is a big deal
And as we were taking this transmission apart these snap rings get in here a little closer. They matter they have
Let's see if you could tell me if this shows up there Kenny
What we call the rounded edge or the stamped edge
And then if you look at this side here, you're gonna have what you call the sharp edge
You see that? Yeah
okay, so
Here's what matters zoom out a little bit
Okay, when you have your sliding gears
So this gear in particular is gonna engage a gear set here or it's gonna engage a gear set there and you can see there's
Two grooves so there's two snap rings on here. This is what a lot of people do wrong
They just start stacking everything on here and building up the transmission grabbing a snap ring and throw it on there
But the problem is you need to flip directions as I'm gonna explain here in a second on which way it goes
The same shaft does not have everything the same direction and that's what really throws people off
So you get some right some wrong?
What's weird about this transmission is both of them were wrong
The side-by-sides and I challenged Kenny. Hey, which way do you think this needs to go?
So we're like, okay, let's grab the manual and prove it. So let's do that
So what you guys see here in the manual is you guys see where it shows sharp edges to the outside, right?
And it shows the thrust
Going that direction. Okay. So let's think about what they mean by thrust
So the thrust means this gear coming over and hitting that wall
If you will, which is this snap ring and stops its travel so that snap ring says nope
No further the shift drum the shift fork and everything are all part of this
But when you bend shift forks, so you have bad shift drums and things are allowed to go too far where they should
Yeah, I don't want to drop it either. So there there's a lot of factors that line all this up
But here's why this is important. Okay, so let's see if we can explain this in the video the sharp edge
Needs to be on this side
When we move this direction and the sharp edge needs to be on this side when we move that direction. Here's why
I'm gonna do this the correct way
Okay
So the sharp edge this way these edges in here that are cut with the the tool on the lathe are razor sharp
Right, like you could feel how sharp they are
So when you have a sharp edge to a sharp edge
You could sit and push on that all day long and it creates that physical stop really nice
If you use the round edge
Okay
what will happen is that inner ID since it's got a ramp on it now will actually allow it to creep up and come off and
Dislodge and come off the shaft
And now if this snap ring a lot is allowed to come over here
This gear is gonna try and lock in to something else. And then what you have on a constant mesh transmission is
Anytime these can't be secured exactly where they need to be
That's where you're gonna get two sets of gears trying to lock at the same time
That's what locks up the rear wheel
Because these are directly connected to the output shaft to the sprockets to the final drive doesn't matter
Whatever it is
And if it doesn't stay where it needs to be and the shift drum doesn't know this is going on
Right doesn't know that snap rings popped out. So it's telling this shift for hey
Let's lock in this gear set. The shift drum is still turning this shift fork is going over
It's supposed to stop. It doesn't stop it allows those gears to touch and lock into the other one
Boom, you got a locked up rear wheel. So it matters man. It matters
Why did this person get lucky? I can't tell you, you know, did it get built and then put in storage and not road?
I don't know. I don't know any of those things but my friends read your service manuals
I think Suzuki did a decent job right here reminding you in the area of the manual my favorite favorite go-to
Manual copy in the new space
We just moved in to have electronic copy the Honda common manual my favorite manual ever
The last version things like 700 pages
I have another transmission video where I go in and show you how to take these all off how to
Rebuild the transmission how to line all this stuff up and some other, you know, kind of unique things on transmissions
You know what these little bearing pins are for all that. We got it here how to wrench
Anyway, Kenny are having some fun proving a point when it goes service manual to prove to him that I wasn't
You know making jokes are going the wrong way
Stay tuned. We're gonna do a lot of fun stuff with this bike this motor MotoGym kind of bikes gonna be really unique
You probably haven't seen a transmission before that's gonna look something like this
throw this baby together real quick here I
Have never done this before either so this is my first time and
Crazy idea Kenny found on the good old internet, but this this will be our transmission
And that'll probably look really weird to some people to see, you know
3-quarter liter bike
GSXR 750 with only one gear and we're thinking we're gonna be putting welds on some holes there too. Maybe right? Yeah
Yeah, yeah, we could talk about that a little bit since we're in here
So, you know in a previous video we talked about the oil pathway and you have to know
How everything gets fed with oil, but it comes through the engine case. It feeds this side
It goes this way to get to this bearing and then that's the the end point
The problem is we got these little holes in here that are dumping oil for the shift forks and for those
Spinning gears that I talked about like this one. Okay, we need something to oil that
Well what we're afraid of what we don't know and we're open to comments on this is that now that there's not that
Minimal clearance around there kind of think about putting your finger over the end of a garden hose and controlling that pressure
We don't know is it gonna dump too fast kind of curious about the whole thing
This should get enough splash lubrication where it wouldn't matter. My biggest concern are the bearings
the support of bearings right and then
These two bearings get fed out of the engine case and gold here
It looks like it feeds us, but it doesn't it bypasses around
Comes into this bearing feeds through the center, then that's how this bearing gets its oil
so we got some figuring out to do some of the you know,
Worldly motor gym khana people you've talked to said that they plugged the holes. Yeah, that was what one person mentioned was
This me not knowing what that even meant until we're getting here. It's starting to make sense. So yeah
That's gonna be fun. We're gonna have some fun no matter what so we definitely got some stuff to figure it out
We should weigh all that too. It's a chunk of weight. Yeah, we're taking out of there
Yeah, so basically everything in that box, right? Yeah
This is it. This is like we're gonna go the route to put new bearings on
Even spacers, of course seals things like that
But and then it was kind of funny we said if you want to you don't kind of zoom in here
I would have actually replaced this gear. There's a little chip on there. Actually, it's on
Everyone that's on at least three of them that I saw
But since we're not engaging into here, this side's fine
So first gear was fine
Right, and I I don't know without putting it back together and determining would that be second gear just because it's next to it
Doesn't mean that second gear sometimes it right bounces the ratio around but whatever that one is there were chunks out of it
She got banged up the other
I'm your friends. That's it for this video. Make sure you like share subscribe. Stay tuned. This is gonna be fun project
And have a back-and-forth Q&A session with other members as well
We're super excited about that and with the member channel, it's gonna really make it more intimate
We're gonna be able to bring that back into more of a community instead all the Yahoo's out there
They're just causing trouble and being idiots
This community has always been about helping each other and getting those the answers to the questions we need
I mean you gotta remember I love YouTube too when I want to learn something
It's quite often one of my first go-to places to get information or to learn something that I'm trying to do
So we love that we can do this for you as well
And we just want to make this a community that is more attentive. So we want to be more relationship focus
That's a big thing of the memberships. The other thing is YouTube does this I think it's kind of funny
But we're doing the emoji. So if you're a new member, it's gonna be a green one
We kind of went along the lines of like training does and most certification programs bronze as your entry level
Silver's your middle of the road and then gold as your top certified, but we added one more
We added a red one just to say hey, thanks for all the love after you've been here for a while
So for all you that love that kind of stuff, it's there for you
What else are you gonna get with this? What you're gonna get is really honestly in my opinion
It's really a way just to say thank you
We've tried really hard over the years to figure out creative ways to not
Beg if you will but to try and encourage and remind people that hey, I got a full-time job
Always done this on my own buck. All these expenses are my own as I move to this new location Phoenix. It's really expensive
We got a building insurance, you know, we got everything
So it costs a lot to be able to do all this and we really do need your help to offset some of that
So this is a way for you to really easily just say thank you and create that
You know, like I said that deeper relationship with us as well to get the answers that you want and you need
So with that being said, I hope this has caught your attention. I hope you thought man. That's really a great idea
Look at the options below and hit that join button
It'll tell you what tiers you can figure out what works best for you and what attracts you we are gonna get back at it
We're super excited about this. We're already gonna start moving forward making content. That's member only
So those videos we were just talking about but my friends whatever you're doing be safe
I hope that you're working on something that's making you smile or that you're getting through it or that's making you money
So we're gonna get back at it. But as always make it a great day and keep