Building on our previous diagnostic steps, this video demonstrates a comprehensive engine misfire fix for a vehicle's #2 cylinder. We show the entire car repair process and how to use an obd2 scanner to confirm the success of the repair. Watch to see the diagnostic data differences before and after the fix! Demonstration was on a 2014 Mazda 3 with a 2.0L engine. 10% Off! MUCAR 892BT Purchase link: https://mythinkcar.com/discount/OFTJOFVW?ref=ixlwsudn Part 1: MUCAR 892BT | Why This Diagnostic Tool Beats Others in 2026 https://youtu.be/mIrtRQMwEGA * Free software upgrades for life! * AI Built in diagnosis feedback system * Bi-directional component testing * Live Data Streaming Chapters 0:00 Intro 2014 Mazda 3 2.0L Misfire repair 3:12 Step 1 Cold engine cylinder ignition drop test 5:12 Step 2 Hot engine cylinder ignition drop test 8:40 Step 3 Spark Plug Removal and Inspection 11:10 Step 4 Engine Compression Test 17:57 Step 5 How to get the free software upgrades 21:27 Step 6 Spark Plug Ohm testing and gapping 33:12 Step 7 Installing ignition coils and plugs PRO TIP 33:45 Step 8 Air Box problems 41:50 First Start Up 42:49 Pro Testing Tip from 30 years of experience 43:39 Post repair secondary ignition test results 45:21 100 miles MUCAR rescan 51:19 Before and after engine mount BONUS CLIP 51:32 Summary and thank you for watching!
Tool 2 Wrench Amazon Store Links: https://amzn.to/2Ujfu5F Use these tools links to support How2Wrench and know we use the same tools as seen in the videos! Join this channel to get access to these perks: https://www.youtube.com/channel/UCBhM8DCKnT3qXwTW0eToyCg/join -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways One on one Techline: https://how2wrench.com/ols/products/techline-one-on-one Below are some links that help support me and my work. Keep Wrenching, Shane Conley Instructor/Motivator/Motorcyclist
In our last video, we showed how we used
the MuCar diagnostic tool to troubleshoot
that we had a number two cylinder misfire.
And in this video, we're gonna go ahead
and take the information that we gained from the scan tool
and now try to actually fix the vehicle.
Ultimately, in the end of this video,
once it's repaired, we'll also show the diagnostic tool
has cleared the code and the differences
from the pre-fix to the post-fix,
showing that the tool itself reflects these changes.
Before we get into it, I wanna be transparent.
We were not paid for this content.
This is of our own opinion and our own experiences.
One way that you can support the channel
is by smashing that subscribe button.
It's free, that really helps us out.
And if you really wanna buy us a coffee
because we saved you a ton of money or got you coupons
or saved you thousands of being able
to get the right answers, join the channel
as a way to buy us a coffee or say thanks.
All right, let's get into it.
In case you missed the other videos,
why don't we just re-baseline what's going on with this car.
The customer had a check engine light come on.
The car lost significant power
and then forced them off the highway
to pull on a service road and kind of nurse the car
over to the side of the road.
Turn the car off, turn it back on.
They could drive it, felt that it was better
than it was on the highway,
but definitely concerned that there was lost power.
And then at times the check engine light would go off,
the power would come back
and the car would seem to drive normally.
It was a very intermittent problem.
When I first hooked up my scanner
that I just keep in my vehicle all the time,
it showed no codes.
Now the car was drove here, so it was at temperature,
but we just weren't getting anything.
That's when we hooked up the MuCar diagnostic tool,
the 892BT, and that's when we saw a very detailed report.
And we're gonna use that information to fix this car.
As with any smart technician out there,
we're gonna use every tool that we have at our disposal.
So what we have here is we use the 892BT
and came up with what the code was stored
in reading and that we had that P0302,
which is a number two cylinder misfire.
So then we also had a test where we took our GTC505,
which is a secondary ignition testing tool,
and we saw some correlation between these two.
As you can see from these two screenshots here,
the number two cylinder had a significant higher
secondary voltage in kilovolts
than the other three cylinders.
And what you're looking for is some commonality here.
We had three cylinders reading one
and one reading way out of the other.
And that cylinder also is what the scan tool
told us that a misfire was happening on.
This started to lead us in a direction.
The car is 180,000 miles on us,
so something breaking down wouldn't be a surprise.
But one of the things we challenged the newer driver
is to ask them when they filled up last
and they had just filled up the day before.
Ian's girlfriend has a hybrid vehicle.
We were concerned that possibly he put E85 in there.
So he went back to the pump and took a look
at where he got gas and fortunately it wasn't.
But these new labels can be confusing
to the newer driver that really doesn't understand
what these ethanol fuels and blends are.
A 15% fuel is not E85.
I can't stress enough,
I would try to put premium fuel in whenever you can.
These labels right here,
the way they're doing these now
and you're not gonna see this every gas station,
they can be confusing.
So I'm gonna do two tests
before we go further into this as well.
And I'm going to do a cold test
where I just fire the engine up
and then I'm gonna go ahead and unplug each coil pack
and see if the misfire gets worse
or it doesn't change at all.
If it doesn't change at all on a cylinder,
that means that cylinder is the dead one.
But what I suspect is gonna happen
is this is taking the engine to get hot
and then the problem gets significantly worse.
So the electrical resistance in the harnesses,
the coils, the fuel injector, something,
I think it needs to get hot to really show the problem.
But let's just try it.
We'll go ahead and try it cold.
Okay, as you saw,
there was no difference in the engine at cold
for pulling that off.
Every cylinder died down,
which didn't show any dead cylinders.
So let's let it get warmed up and do the test again.
All right, we're really starting to hear that miss.
Vehicle's been running by eight.
Might be coming up, let's go ahead and try.
All right, we're at the 10 minute mark.
Let's try again.
Okay, no difference in any of those.
So we can isolate out, most likely,
the ignition side of things.
Does it make a big, you're taking the spark away
so you have the cylinder significantly drop.
So let's continue on with our problem.
Once again, our code is showing
that we have the number two misfire
happening significantly.
So we're gonna focus on the...
I'm gonna do spark plugs first.
Just try that, eliminate that.
And then I'm going to, because it needs it more importantly.
And then I'll work next into the fuel injectors.
It's a lot of work to take off that plenum and get to that.
Because on this particular model,
the fuel injectors are underneath instead of on top.
Like, I think if two years older,
they would have been changed in a matter of minutes.
This is gonna take a bit of time.
All right, let's keep going.
So one of the things I like to do
is take a marker and start marking what each coil is.
I'll do the same thing with the spark plugs
so I can be extremely clear when I pulled out
to take a look at them of what cylinder they came out of.
Have an actual 14 millimeter spark plug socket.
So I'll use a little magnet.
And these are most likely original spark plugs.
Look at that.
It's definitely gonna be nice to just try this,
see what happens, but let me mark this.
Doesn't look like a horrible burn.
Doesn't look horribly lean,
but definitely some carbon buildup.
And these are just plain old, need to be replaced.
Out of curiosity, I'll check the gap.
All right, next I'm gonna go ahead
and do a compression test.
And one of the things I want to do
is disable the fuel pump.
So an old school way of doing it
is to go ahead and just pop the fuse cover off,
find your fuel pump fuse or a fuel pump relay.
So on this one, this is kind of weird
because you see this shape, right?
And when you flip this, it's got the cutout backwards.
But when I looked at all these fuses and relays,
you hold it in this position and then count over.
So for example, the fuel pump one,
got a little holder right here,
is the second one over on the bottom,
which is gonna be this one.
Let's go ahead and pop that out.
And then just for purpose as a demonstration,
I'll show you another one,
is I could go in here and there's a fuel pump relay.
Let's see if I can get this in here and show you all.
So there was my fuel pump fuse.
Okay, and it's also labeled,
if you go to the owner's manual,
it'll say like, I think fuse 14, I think is what it was.
And then the third one over here is the fuel pump relay.
Okay, so I can go one, two, three.
I got both of those out
and now I should be able to do a compression test.
Why don't I show you the more modern way of doing it?
If you have the tool on the scanner,
we can shut the fuel pump off that way too.
But I'll go ahead now to prove a point.
Secondly, there is still gonna be some fuel in the lines.
So it's not like,
turning the fuel pump off is just gonna
not add more fuel, right?
So the first couple of revolutions of the engine,
there's still gonna be fuel in there.
So what I'm gonna do just to keep things covered up here,
go ahead and get these connectors out of the way.
And I've just got a towel I'm gonna put over here
just to cover things up
so that I don't have fuel flying out all over the place.
Where a lot of people get compression testing done wrong
is they take and leave the other spark plugs in
and the specifications are not designed
to have the resistance of the other cylinders.
So let's go ahead here and just do this one.
I'll crank it over a few times, see what we get.
We're looking good.
We got 190,
yeah, right about 190.
Switch cylinders.
You need a good battery to do this as well.
Nice.
Cylinder three, we got a just 209.
So we write these down.
And keep in mind, this is with the,
when I did this, I didn't try to open the throttle plate.
So that could affect the numbers as well.
I just tap the accelerator and hit the start button to auto.
Start turning the motor over.
Okay, now this was the cylinder
that's given us our misfire code wise.
How do we turn it on?
Oh, that's great news.
We got 210 with not even having the throttle open.
All right, feeling good about the engine.
Feeling good about spark.
Really leaning towards a fuel issue.
Last one.
Pretty common on these tests too.
If you're not hooking up a battery tender
or charger on there, it's gonna potentially leave low too.
But look at that.
We got 210.
So we've got 210 and 210.
Okay, so 210s, 209, and the 190.
Now you might think, oh wow, that number four is really low.
But you gotta think about,
there's an allowable percentage of difference, okay?
And then, which you'd have to go look up that spec.
But on average, like 10% across the board is okay.
Like a worst case you need to do a motor
is 18 to 20 in most published manuals.
But anyway, these are consistent enough
that I believe the problem is elsewhere.
Not in the mechanicals of the engine,
not in the electrical.
We're still gonna try those spark plugs quick
since they're so old.
So a couple other things we could check,
but right now I'm really believing
that this is a fuel related issue.
There's so many times where you wanna upgrade the software
and that's another feature that they claim with this
is that it's free upgrades forever.
So super, super cool
compared to anything I've ever seen before.
But once you turn it on,
let me show you and go to this upgrade.
And I just updated software and thought,
man, I might as well make a little video for you folks
so you can see how to do that, okay?
So I'm gonna go to upgrade.
I'm gonna go to, let's see, application software.
So I have the app downloaded.
There's another one here.
So this is the latest version.
I just did that one.
So you can see here,
here's one that I don't have downloaded.
I'm gonna go ahead and do that.
It's just as simple.
You gotta be hooked up to your wifi.
Okay, I'm going from a 1.3 to a 1.3.2.
Okay, it says it's installing it.
Last time it just rebooted on its own.
Installation successful.
All right.
Okay, what else?
What's this other?
PDF reader.
I think I want that one.
Oh, that's crazy for different languages, duolingo.
Oh, that's wild.
Let's go ahead and do that one.
Do not care about games, diagnosis, base service.
New version.
Let's go ahead and upgrade that one.
Key programmer.
Why not?
Google keyboard.
Why not?
Writer IP.
Don't know what it is.
I'm gonna update it.
Definitely Google Chrome.
AI.
That one's in the latest one.
I'm gonna let them be smarter than me
and I'm just gonna update this stuff, okay?
You know, the other thing I'm gonna do
is just update these other ones
just so that it can get to a point
of not showing me that I need something, right?
So if I go here, okay?
What is this OTA?
Let's see what we get there.
Current version.
Check version.
Awesome.
All right.
So I don't have anything there,
but if I see here,
one is still downloading.
That's why.
But that's gonna change to two.
Watch that.
Yep, dropped down to two.
You might just wanna update these
just to make this go to zero
so you don't have to think about it
and sit and go through all these.
I guess that's gonna be up to you.
I'll leave that for now,
but just wanted to show you how you could get in there
and update the tool, how fast and easy it was.
Another amazing feature of this.
Gosh, thanks.
Thing is just awesome.
All right, let's do a quick resistance test
of these old plugs.
About 4,000 on that one, 3.89.
Whoa.
Double the resistance on that one.
That's the bad cylinder.
Man, that'd be crazy if that's just all this is.
4,000, 4.8.
Wow, that's wild.
Could we get that lucky?
Okay, so it was,
I'm gonna run through and test it one more time.
They're saying anywhere from four to eight would be normal.
3.88, okay, so 3.88.
Number two, let's call it nine.
One more time since it's the one definitely giving us grief.
Let me try a different spot on the spark plug.
Definitely nine something.
4.5, 4.8.
Okay, for my research, four to eight would be normal
on a new plug.
Let's go ahead and open up this brand new set.
That would be wild if we get lucky enough
that it's just a spark plug.
As you can see, I got new injectors, gaskets,
and even a fuel pump screen.
Most likely wouldn't hurt it to all be done,
but we wanna find the problem,
not just throw parts at it for no reason.
Okay, here's a Bosch one.
The other thing I gotta check is the gap on those.
So that's coming up.
All right, so let's take these brand new ones.
Around eight, that's what they said
a brand new one would be.
It's funny from the one that's reading higher.
The other three reading low.
It is so risky to buy spark plugs off Amazon anymore
because there's a bunch of fake brands out there.
Okay, five on that one.
That's what we'd expect to see.
Let's go back here.
I'm not even trusting this plug.
This thing is just being, there we go.
That makes more sense.
Okay, let me just make sure.
I might have deemed this one bad.
I'll tell you what we're gonna do.
We're gonna go ahead and open all these.
Thing is, you can get brand new parts that can be bad.
So it is not a horrible idea
to go ahead and check these out.
All right, zero our meter.
I think we got 0.2 on there.
0.3, we're good, okay.
427, I'll take it.
It's easy to accidentally touch the strap
and make it hard to check here.
Five, I'll take it.
Make it see it's mega.
Come on, get a good connection.
That is being finicky.
I mean, I wouldn't even wanna put that plug in
if I can't get a good connection here.
Okay, that's what I wanna see.
It's just a matter of getting a good connection.
A bad connection's gonna show high resistance.
Let's just prove we can do it again.
Right there, okay.
Okay, so we're in the High Force 5000 on all the new ones.
So that's good.
Interesting that this one is reading so high.
I can tell by the gap.
The gaps are massive as well.
Let's see if you can see.
We'll go ahead and measure them,
but let's see if you can just see
that difference right away.
Yeah, look at that.
Way, way, way overdue.
Okay, so just for fun.
All right, when I go check the new ones,
you're supposed to use a wire
on fine-tipped iridium ones and not like these
because you could damage them.
But for the old plug, I'm gonna use this
just to show how big the gap is.
It's not as bad as I thought.
We're 50, say 51, 52, something like that on that one.
On the bad plug, number two, we are 53.
I'll write these down.
Oh, 52, oh, 53.
Makes me think the new plugs aren't gapped enough.
Oh, whoa, oh, 55 on that one, number three.
Oh, 55 and jeez.
Sure didn't grab this one to begin with.
Yeah, this one is 57.
Not bad for 180,000 miles.
I really don't think these have been changed
since they have Mazda part numbers on there.
It's just so rare that they put those back in.
Well, let's see.
Let's get an idea what these new ones are gapped at.
Let's go right to this 45, 40.
Okay, that should be good.
Actually, we wanna go just a hair.
This way you gotta check brand new ones.
That one, this one was tight out of the box.
So was that one.
Okay, here's what we're gonna do.
We are gonna go ahead and put these new ones in
and just recheck how the engine runs.
And if it still isn't fixed, we'll move forward.
But the fact that that one, especially the cylinder's bad,
is dang near double what the other ones are,
and the really old gaps are out,
it's worth trying this step
versus going to all this other work.
So let's throw these in and see what happens.
On reassembly, since there's a million videos out there
on installing spark plugs, I'm gonna speed this up for you.
But I will say this, I'm being very diligent
in making sure that I'm putting all those ignition coils
back in the same original locations
because I don't wanna mask any different problems.
So remember those marks that I made in the very beginning?
Those are really beneficial now
so that I don't skew the data.
The air filter wasn't the worst thing I'd ever seen,
but what I find next isn't good.
Check out the condition of the air box itself
and the seal, no good.
All right, some technician at some point,
once you see, that whole corner is missing right there.
See where that plastic is broke?
Let me show you.
And let me show you what that's doing.
So it's basically sandblasting the engine.
So once you think about that,
with that corner missing, okay?
It's not filtering.
That's just literally going right from there
straight into the engine.
Here, I'll pick a spot I haven't touched yet.
Look at that.
That should be the filtered side.
So that is definitely not good.
You can see where the seal hasn't been doing its job at all.
Man, what a bummer.
Bummer for the owner.
Let's see if the pieces, here's a piece.
Let's see if there's another piece down in there.
Well, I'm gonna have to clean this out
before I even try and fire it up,
but I wonder if any of the pieces might even be in there.
Something wedged in here.
I feel like it's loose and floating around.
Yeah, I'll get a vacuum
and see if I can get that out of there,
but it might be something else.
I see some leaves.
Shoot, could be a rock or anything
that came up from the inlet.
Well, let me clean that out.
So as I took a look at this filter even a little more,
you can actually see where the gasket hasn't been sealing,
and it's pretty dang dirty right there
where it's been sucking all that dirt straight in.
We might get lucky that with the new filter
and this gasket in place that it might hold its seal.
I mean, ideally, you'd want that clip grabbing into it
and pulling it down too, but man, this is bad.
Look at how I can just...
That was all going right into the engine.
Man, not cool.
I'm waiting on an air filter to get here right now,
but the other thing I noticed is as far as around the intake,
you see around that number three
where there's some what looks like a leak going on?
Could be something that ran down, could be old,
could be anything someone didn't clean off.
But once again, you start thinking 180,000 miles,
sometimes you're just gonna wanna get in there
and freshen some things up just to make it all new again.
But like I said, we're gonna try these spark plugs first
now that we found this air box issue.
I think we might get lucky
on just enough real estate right there,
but we're gonna chase down a lid too.
I mean, ultimately that's what we do,
but see if we can get this thing back together
and see if the spark plug alone fixed it.
All right, new air filter in.
And that is how a seal should look.
It should be all the way around and not hanging off.
So maintenance, maintenance, maintenance.
Now let's see if we're gonna get lucky enough
to get this corner to seal up.
And I'm gonna do another little trick that I like to do,
especially since the corner's missing.
I'm gonna actually put grease around this
to create a little bit more of a seal.
Now, you might be thinking,
man, grease, grease attracts dirt, right?
Well, I'm gonna do grease on the external side.
I'm just kind of packing some in there
to create a place for dirt to actually stick to.
So what I'm doing is actually doing it intentionally,
you know, and I could do it around the seal here as well,
but I'm creating that extra little, hopefully,
spot that the dirt will stick to and not continue on.
Old school trick somebody taught me a long time ago.
Your benefit it has is it lubricates the seal.
This one's hard as a rock on the old one.
Not that that matters, you're supposed to change them.
This thing's way beyond its maintenance.
I talked to the owner and he was pretty sure
that they've paid to have these things done
like spark plugs and air filters,
and these are all original.
Well, I don't know about the air filter,
but spark plugs work.
All right, these little tabs,
one thing that's gonna make this easier.
Knowing that this tab was broke,
I took the back of the intake off.
It's all cleaned out now.
This is gonna make it easier to put this in here right.
You just gotta take your time.
My clip's on there.
Approach there, there we go.
All right, let's find out.
So that's all hanging out.
In the back corner, the air box is broke off.
All right, here, you don't wanna touch that.
I wanna get a feel for,
nope, that is not gonna seal.
I can tell you right now.
Let me bring the camera in and show you.
All right, so you gotta look at things.
You see how much that corner's broke off?
If I push on this air box,
I don't know if I'll be able to do this one hand.
I'm not 100% confident that we have 100% seal right there.
Now, you could do a silicone it, right?
For right now, what I'm gonna do is start the engine,
try and deal with this issue.
So just to see if the misfire's gone away
or if it's any better.
That's what I wanna focus on first,
but we need to get a new lid to fully fix that problem.
I honestly wouldn't even recommend driving this
without at least silicone in that corner
to create that seal or just waiting and getting a box.
So a couple options there.
All right, fired up.
It is completely sound like a different engine.
Let off the gas.
There's this little hiss we've never heard before
that's happening.
I don't know if it's this.
It doesn't seem like it's that air box,
but we're gonna go ahead and just mash the gas quick.
Just sounds like when it's first sucking in.
Now go ahead and hold a steady throttle, like 2000 RPM.
Hold.
Okay, let off.
So the other thing we know we need to do
is we need to let run 10 minutes.
Remember before when we did our first test,
the problem got much worse when it was hotter.
So we're gonna let it run for 10 minutes right now
and come back.
I wanna give you a pro tip as a technician
on how important it is to document
the entire process as you go.
A lot of people just throw parts at things
and stab it and hope it fixes it.
But if you take really good notes
of all the steps you did, document those numbers,
what you can do after you think you fixed the problem
is you can go back and redo that test
and then verify and have a lot of confidence
that there's been a change, right?
A lot of times there's more than one thing
that can go wrong, right?
So you can tell in this case with the secondary ignition
that we were able to test it to begin with,
make some changes, which in this case were new spark plugs,
cleaned up all the connections.
And then now we're going back and checking it.
And what you're gonna see is some great data.
It's what we hope to see is that we get some consistency.
Let's take a look.
Check this out.
Remember we used our GTC 500, 505, I'm sorry, earlier
and we had differences.
Well, now that we have all new plugs in there,
these have all equalized.
So let's think about why that is.
That spark plug had double the resistance
compared to the other plugs.
So the secondary ignition would have the higher
and additional four or 5,000 on it.
But if we compare numbers between before and after,
that's why they're all equalized now
was because of that bad spark plug.
But ultimately we need to let this engine run,
get to that full temp, and then we wanna drive it.
So let's think of the original problem that we ran into
is they put a fuel in there that was for a flex fuel car
by accident and that's where the only thing we know
that changed that got us to where we are today.
And so I think that it's just creating
some other conditions that let them show themselves.
As of right now, we're starting to equalize.
We know we have that one bad spark plug out of there.
But if it keeps running like this
and isn't popping codes,
I see no reason to keep going and putting injectors in it.
We wanna fix the airbox problem.
Obviously that was an issue as well,
but we may have this fixed.
So let's just stay tuned and we'll see
how it goes after a few miles
and then come back and do a summary.
Or we're putting injectors in.
All right, we've been running about 13, 14 minutes
and the hiccup is no longer visible.
Let's go back to our home screen, auto search.
That looks good.
All right, I found a Mazda.
Boy, this is really connecting quick.
All right, let's do automatically, key is on, modules.
Okay, we are mostly focused on the PCM
and let's do that to just look at the one that we wanted.
Okay, so we are in the PCM now
and we're gonna look for,
even though it says there's no codes,
but we're in key off.
We're gonna command that.
Okay, it's ran, like I said, 13, 14 minutes.
I charged the battery, cleaned the connections too.
We're at 12.3 now.
We were 11 something, I think, when we did it last time.
Lights are on right now, that's why it's not 12.6,
but let's go back and do the key on.
And let's see, go here.
No faults reading, but let's do this.
Let's go back to the menu.
Let's do read data stream.
All right, let's look at some of those same charts
that we looked at before.
So we're gonna look at the fuel pressure
and we're gonna look at misfires, okay?
There was that cylinder two misfire.
We'll grab both of those
and then we're gonna look at, let's look at RPM
and then we wanted to look at the fuel pressure.
Let's do fuel pump, hit okay.
Okay, look at that, no counts.
I have to go back to the video.
We were a couple hundred counts on misfires.
I'm gonna go ahead here and rev it up.
So if you aren't really familiar with all this stuff too,
one other piece of data we can get right now
is we could see the alternators working.
See how we jumped up to almost 14 volts?
So that tells us our charging system's working
without even having to do anything.
Because key on, we were 12.3, now we're 14.
So that's good, alternator's working, right?
So right away, what's interesting
is the RPM has really stabilized.
If you remember in the video before, we'll do the before,
you could see where it was jumping up and down.
That's what that misfire will do
is it creates a bug in the system.
So we're really happy to see this.
You notice when I did the coil tester,
you saw those secondary voltages going all over.
I think I could fine tune the range that I'm looking at
and dial that in,
but really I'm using that GTC tool
as a go, no-go gauge, right?
This is actually looking at what we have going on.
So here we're just showing that the fuel pump's on.
I want to look at the PSI
so I could see I grabbed the wrong one.
Let's just go back to the data here
and then let's look at fuel pressure.
I think we can go here
and then I think we can change it to PSI, we can.
So I must've had it on Imperial last.
I think it defaults, or excuse me, on metric last.
I think it defaults to, oh no, that's funny.
It said KPA, but when I go in here,
here's where I could choose it, my bad.
But check this out, 450 PSI
and it doesn't seem to be fluctuating,
but let's go ahead and let's look at everything on a graph.
Okay, look at no misfire, no misfire, rock on.
Look at the RPM compared to before,
just steady as can be, fuel pressure, steady as can be.
I really don't need that fuel pump on.
If I go back here, or not on, I'm sorry,
I don't need to be looking at it.
So let's say you look at a piece of data
and you're like, why am I looking at that?
I don't need that.
I can just come back in here and uncheck that
and then give myself a better graph to look at.
Way cool.
I really think this car is ready to just be test-drove
and put some more miles on,
hopefully not put that wrong fuel in there,
but give it a few days, just get some data on there.
The car never left a customer stranded,
but it is scary to have an engine code
and lose power on the interstate.
Very, very, very dangerous.
Most people just look down right away
and that's how an accident happens.
So I've recommended just taking some back roads
and being mindful to think about where you're driving,
do you have a way to pull over?
But never ideal, but when you have a car
that has intermittent codes and intermittent problems
like this one did, it can be really hard to diagnose.
And in this particular case,
we had it to where it was consistently at least misfiring,
but still, what was the problem?
So in the beginning of the video,
watch that valve cover and I was gonna come back to it.
Well, here's before and after
of the motor mounts being replaced.
On the bottoms and new motor mounts,
you can tell the difference on the top,
how it's shaking and vibrating.
So I wanna give a shout out to Mukar, to this tester.
I mean, how fantastic was this
in helping us diagnose this problem?
But I think it's time to put some miles on this Mazda
and give it back to the customer.
All right, my friends, if you haven't done so,
you can go to the description of the video,
get all the links or the first comment
of where you can purchase the tools
that I use this video for yourself,
but at least hop over their channels,
give them a like and comment below
if you're using this scanner and what you think of it
or what you thought in this video,
we'd love to hear what you have to say
in the comments below.
But as always, like, share and subscribe,
make it a great day and keep wrenching.