BoltBuster - Fixe glue in with Hilti 500 v3 - climbing and highline bolt break tests

HowNOT2
100 followers
4 Video Views·Nov 2, 2019
Fixe hardware glue in bolt installed with Hilti 500 v3 epoxy tested in shear in our concrete tests pulled the bolt out of the hole at 55.88kn and 60.02kn and 49.70kn. - with Bobby Hutton
HIGHLINE UNIVERSITY INTERNATIONAL
www.howNOTtohighline.com
BOLTING BIBLE
https://www.hownot2.com/boltingbible
T-SHIRTS
https://slacklife.threadless.com/
BECOME A WEEKLY SUPPORTER ON PATRON
https://www.patreon.com/howNOTtoHighline
DONATE ON PAYPAL
http://www.paypal.me/slackcessfund
All donations go straight back into making this channel better. We put donors names in the ending credits and give them exclusive access to the SlackSnap and BoltBuster Raw Data spreadsheet + corresponding footage associated with each break.
Do you want to see the glue and bolts from Fix Hardware break and shear with V3 500 glue from
Hilti in our concrete tests? Check it out on this episode of How Not to Highline.
Hi, I'm Ryan Jinks and welcome to Bolt Busters where we break anything and everything you can
think of regarding climbing bolts because we're curious. And today we have the Fix Hardware's
glue and bolt. Now, this doesn't really have a name because now they have this forged glue
and bolt, which has a huge Healy PLX HCR, blah, blah, blah, forged name. Anyways, this is just
their glue and bolt. Basically, it is a bell shaped bolt with a weld right here. And I actually
really like it. Now we're going to talk about in this episode and show you how much it breaks in
When you install these, you must create a notch. You must drill at an angle on both sides in order
for this part to be buried. So you only see it that much and you don't see this top. It doesn't
just sit up like this. Also, when you install it, if it's being pulled in that direction,
the weld has to be on that side. So it's not pulling against the weld. Now the weld will be
underneath the glue and you will never see the weld, which also helps protect it from
the elements. It still can create corrosion if it's in a corrosive environment. Something
interesting about these is the website states that they're 304 stainless steel, which is not as good
as 316 stainless steel. However, when we receive these, they say PLX on them, which is Fix Hardware's
duplex stainless steel, which is supposedly a notch higher than the 316 stainless steel. However,
there have been reports that they've rusted. It depends on the environment they're in. Again,
if you're in a corrosive environment, just go with titanium, like near the ocean. I think they're
great. I think the PLX is fine. It's just, I don't think it's like super better than 316 stainless.
It's just kind of frustrating when their website says one thing and their bolt literally says
something else. Anyways, this is the 10 millimeter, and this is the 12 millimeter
version of the same bolt. And you can see here that it's just slightly skinnier. This goes,
can go, in a three eighths inch hole. This goes in a half inch hole. Now, if you stick this in a five
eighths inch hole and this in a half inch hole, your hole's going to have a lot more glue. It's
going to cost a lot more money to be using that glue. We're not quite sure, we haven't done our
tests yet, how much glue is too much glue. In this test, we did use a half inch hole for our
10 millimeter bolt. The three eighths inch hole or 10 millimeter holes just seemed a little bit
too small. So keep that in mind that we used a little bit bigger hole. It had a good cylinder
of glue around it. And also keep in mind that we use the Hilti V3 500 amazing epoxy that we
typically love to use so much. What we used was four months expired. Now it doesn't really affect
or hasn't affected anything we've done so far. Now keep in mind, these are rated for 35 kilonewtons
and are $4 and 50 cents a piece. Now in our first test, we used a 45 kilonewton steel carabiner
that's been used, abused and is rusted since it was outside for years. That broke my carabiner
at 44 kilonewtons. Then we redid the break test with my 72 kilonewton carabiner and the bolt
pulled out of the hole and separated from the glue at 55.88 kilonewtons. And the other test
also broke in the same way where it pulled out of the epoxy glue and it broke or pulled out at 60.02
and the last one at 49.70 kilonewtons. Now what's interesting is this is a very slick,
shiny, smooth surface with just some tiny ridges right here to grab that glue. The glue is
basically not sticking to this metal. We also had the same problem with some wave bolts with the AC
100 glue. Sometimes if the bolts just don't break the metal at the top, the other thing that can
happen is they're separating from the glue. And that's what we saw in these tests. I don't know
if their other style with the threads is going to have more grip. We'll find out in future tests.
And we don't know if the glue being expired had anything to do with it. Let us know what you think
about expired glue since that is uncharted territory as far as we know. But we do want
to test expired and not expired in every situation we can think of. We want to test everything. Let
us know your feedback on this test and on how we did our stuff because we read and watch everything
you write in order to help guide us towards the next few samples that we break. Be sure to look
at the Bolting Bible to learn how to install glue-ins and mechanical bolts. Please don't
bolt anything you don't need to as we advocate for natural rigging or trad gear. We don't want to
spray bolts everywhere. We just want to make sure if you are going to put them in that you put in
the best ones you can. Make sure you never use zinc plated bolts ever and make sure you always
clean the holes when you put in glue-in bolts. We post a bolt buster episode every week since
we have lots and lots of data. We will be rewriting the Bolting Bible this winter after we break a few
hundred more samples and it's raining outside and we're bored. We're going to put all of our data
and information on the Bolting Bible and how to remove bolts and how to replace bolts and make
sure all the information is updated. If you have information you think should be in there, please
let us know. We will include it. It's a collaborated effort for free information so the best bolts get
installed around the world so we don't have to fix them in a few years. And every week we post
bite-sized episodes of our bolt break tests because there's so much information to try to
share with you. Make sure you like, follow, and subscribe on YouTube, Facebook, and Instagram as
we're posting stuff all the time. Cheers!
Hey thanks for watching but don't be an idiot and try highlining without going with somebody
who knows what they're doing the first time you go out. We actually have available now the Highline
University International which is A to Z everything you need to know before you go highlining. This
teaches you how to use a highline that's already rigged. So let's talk about some leash management.
That's the H0 course which is out right now and available at hownottohighline.com. It's
over 100 videos with quizzes, pdfs, illustrations, and it comes with homework and teachers that you
submit it to. It's a very interactive online school so you get to learn in person online.
