Hi Guys, in this video I want to show you how to make a wire weaving pendant with a prong set accent stone. (Remember that you can watch in HD (bottom right of video) for better quality)
It somehow reminds me of spring and the abundance of a meadow full of wild flowers so this one is named after the Greek goddess of gardens: 'Antheia.
I hope you enjoy making this! If you make this, pop it into our facebook group, (link below)I always love to see your version!!
It's a jewellery making community (wire and otherwise) for everyone to share their ideas, post their tutorials/events & workshops or ask questions. We are a great buch of artists and have a lot of fun being creative together with challenges and fun projects to create every month. Find it here⬇️:
To see what workshops I am currently running or to get full kits for some of my tutorials, square/half round wire & more tutorials can be found in my shop: https://www.imbalicrafts.com/shop or on Etsy (search for Imbali Crafts)
- 0.8 mm (20 ga) square wire - 0.4 mm (26 ga) round wire - 0.8 mm (20 ga) half round wire - 0.6 mm (22 ga) half round wire - 5 mm diamond cut gemstone or CZ - 2, 3, 4 & 5 mm copper beads - Pear cabochon 30 x 20 mm
Tools:
- Flush cutters - Bent nose pliers - Chain nose pliers - Round nose pliers - Marker pen
Hi guys this is Nadia from Ubali Crafts and today I want to show you how to make this wire woven
upside down pair. If you like my tutorials please consider subscribing because I upload new stuff
every week. If you do use my tutorials I would appreciate it if you could give me a mention to
help me grow my channel. Right let's get weaving. Okay so we're going to grab our base wires.
There is four of them and they're quite fine 0.8 or u20 gauge and we're going to mark the center
and we are going to take a piece of our half round and wrap it around roughly about a centimeter or
so to the side. I'm not sure what that is in inches and and we're just going to do a couple
of wraps around. You can if you don't have half round obviously use rounds but honestly the half
round just binds it so much better. So we're going to do that on both sides and I'm going
to wrap it around maybe four times now and then I'm going to cut the half round in such a manner
that both ends are hidden on the inside when you're bending it in. So flip it up and then trim
both wires on the inside so that it doesn't show and get stuck on your clothing. Now we're going
to do exactly the same on the other side marking and on the other side of the marking like here
then we're going to bend in. Now unfortunately I've bent it in the wrong way so don't do that
just put the wires the cut wires on the inside not the outside doesn't really matter it's just sort of
a small a small detail. So we're going to place the stone on on the inside of the cradle
upside down so that the point of the pair snugly fits in the center. We're going to shake the four
wires around the tip of the stone to kind of wedge it in place a little bit fiddly at this stage
obviously because there's nothing holding it in place you need to hold your fingers over it and
I'm going to bend just about a centimeter or so above the stone and we're going to continue
shaping so if you put a tiny bend in it like I've done it's much easier then to continue forming
because the wires don't cross at the top so that's what it looks like. You need to adjust it obviously
as you go along and then once we've done that we need to secure the top so once again grab your
half round wire again if you don't have half round obviously you can use round but I just find
that having half round really gives the whole design a lot more strength and it kind of looks
better as well so if you can get some half round. I do have it in my shop if you want any for the
people that are in the UK and if you are in the US Rio Grande does half round which is fantastic
quality so I like buying from there as well um all right so once we've done that we're going to
wrap a couple of times around the top where the the wires meet gently take your time with that
the neater you go the better the end result so that is just to tie all the wires together
we're going to squish down very technical and then we're going to separate out the wire so
we're going to need two of the front wires and this is going to become our bail and then we're
going to separate out the rest of the wires to sit at the side for now we're not going to use them
so all we're going to do is use that 45 centimeter piece of wire or whatever that is in inches I'm
not sure we're going to wrap this around and just make sure when you get to the top leave a
sort of 10 centimeter tail 5 to 10 centimeter tail because we're going to need that to wrap
secure the bail once we come back just very slowly the slower you go with the sort of
technique the neater it will look so that the half round wire can slot alongside so just continue
so that's what it looks like so far so again obviously you need to adjust the bail length
to the size of your frame and stone so just double check that so if your stone is larger or smaller
that will affect the size of your frame so you're going to have to sort of scale this down visually
and then adjust to that so to create a cradle at the back we are just going to bend the tip and
it sometimes can be a little bit tricky to isolate the single strands so just take your
time it's quite easy at this stage to mark your wires because you're kind of slipping
with the wires when you can't really grab so be gentle with that especially copper is so soft
and it marks super easy now the great thing with that is you can sand out any marks if you have
any sandpaper and you can go over the copper easily and remove marks that way quite easily
because it's very soft as I said so we're going to bend some wires in near the sort of wrap that
we've put to keep the wires together as well and this will create like a shelf little sort of
recess for the stone to sit in you'll need to adjust this as you go along at the moment we
just want to make sure the stone fits in which it does so happy with that so now we're going to
fold over the wires running at the top of the stone and that's easy to do because obviously
they're quite soft as I said you don't really need any tools you could use a needle to separate out
the wires if that's easier and all we're going to do is pull them over the top of the stone
to make sure it captures it and that really is just as I said um to to set it in place
you may need to adjust a little bit later and that's what it looks like so now we're going to
secure the stone a little bit further at the back we're just going to bend in the the most the
outermost wires um at the back of the stone and this will make sure the stone can't fall out
a little trick as I said because I can't seem to isolate the wires so that will have marked them
um which is something that I later filed out that's what it looks like so far stone is secure
so next we're going to bend the bell and for that I just use my fingers as I said the sort of
dead soft copper wire that I've had is so easily easy to manipulate and you can do that easily
without any tools and I find it easier to shape something with my hands rather than to use tools
which again also eliminates obviously marking your wires so once you get to the back you're
going to separate out the wires and we're going to fold the bail over on itself and we are going
to use the remainder of the tail so I've left roughly about five to eight centimeters there on
the half round and I'm going to be using this to wrap around um all of the bail wires from top to
bottom so I'm utilizing some of the frame wires to anchor it going through to make sure that it
doesn't look too bulky so I'm not running all the way across over the front I'm running through
the um the frame wires to attach I'm just going to do this a couple of times maybe three or four
times and that should be enough to secure it it was a little bit fiddly and that's why I recommend
some needle nose pliers but if you can get them um they're quite a handy tool to have for these
kind of occasions it's real tight you can see why the half round wire is good for that sort of thing
so there we go that's what it looks like so far so you've got your two wires which we're going to
come back to later and now we've got three wires on the left and three wires on the right so what
we need to do now is kind of step up the wires on the right so I'm just twisting them around
the bezel or the bail rather um and you have to be really careful if you're using square wire
because it's super easy to kind of start to put a twist into the wires um which then
takes a lot of time to get untwisted if you want to reuse the square wires for any sort of
other aesthetic work so be gentle when you're folding them over and take your time I'm just
going to straighten them out and obviously you can see here I'm painstakingly trying to get
to keep the wires from twisting so just folding them around the bail so that they meet up at the
top and that's what it looks like so if necessary untwist them that's what it looks like so next
we're going to bring in our weaving wire again I often work with the same weaving wire throughout
the project which means I just add in once if I can um and you know later on necessarily if
necessary I will just bring in more wire I just find it helps me to keep everything
you know without snagging so what we're doing here is a two by five which means we're wrapping
five times around the base wire there's a little inset on the left that shows you what it looks
like so five times around the base wire and then twice around both wires and then we just repeat
so that's a super easy weave just make sure you scoot your weaves up when you're doing this
especially with a square wire it can happen that the weave isn't quite as even because of the
obviously the corners so scoot it up another really handy tool bent nose pliers and once
we've done that it's time to shape our first weave so there's a good amount of weave that
we have there once again you need to adjust this for your own design um it will be different
depending on the size of your stones you kind of have to visually adjust this for you so we're
going to twist it in an anti-clockwise motion and we're going to fold it around the stone
like so I'm just going to have to adjust the shape as you go and then we're going to create swirls
at the bottom this little detail that we have to create a little bit more interest in the piece
so first we're going to attach that weave to the frame with some of the leftover 0.4
20 gauge wire that we have so we're going to go underneath the frame and we're going to attach
to the bottom so that can be done in any which way as long as it's secure and it doesn't bark out
your piece too much remember when cutting your wires make sure you cut them in such a way that
they can't be they can't get stuck on clothing when you're trimming off wires
this can be quite a fiddly business and quite often you can use you need to use something to
help you um get underneath the wires and for that I usually use a t-pin which is really a really
handy little tool for these sort of instances or just another piece of wire to wedge underneath
so next we're going to create the swirls so in these instances because the wires are flat it's
quite difficult to get your round nose pliers in so I generally tend to shape these weaves by hand
first roughly at least and then I'm going to trim off the wires because it's much easier to
control the shape and look without using a pair of pliers which in this case I find
marks the wires a lot more because you can't really get a good grip on the wires
so just scoot it down and shape it and you're going to trim off the wire just in the center
next you're going to shape it so once you've got your wire cut down to the right size you
can always adjust it later so always tend to cut a little bit too long and rather trim it down
because you can always cut off what you can it's difficult to add in obviously so um that's my piece
of five cents to that um all right so next going to shape the bottom wire as well once again it's
done by hand so trim it down to size first and in this instance um we can use a pair of pliers
because a little bit of an overlap so it's easier to get to the wire there and I'm just going to
rotate so now a little trick is to pinch the wire ends that will narrow it down to the point and
will give you a little bit of a sort of refined tip when you're twisting the curls as well
kind of like a tapered look which you would normally get if you are using um a file once
the curls have been achieved so this is easily done by just pinching the wire ends
just going to shape and place it until you're satisfied as I said I quite often readjust I'm a
really slow wrapper I adjust and readjust throughout all my projects um so take your
time with that the more you pay attention to small details the better the end result
so that's what it looks like so far next we're going to create a coil with the
remaining wire on the right hand top and all it is is the remainder of the 0.4 if you need to
add in just add in about a meter or so of wire then we're going to create I'm never good at
measuring length of my weaving wire because I have a tendency to work off the reel so once
we've got to length we're going to follow the initial shape of the weave and we are going to
come through the frame underneath the first weave and we're going to be attaching that wire to
the frame itself there we go then once again obviously shape it if you need to and readjust it
so now I have attached it to the frame but I later on changed it to attach it to
the wires that seat the stone just simply because the way I'm attaching it now it kind of barked
the the frame out a little bit so that didn't fit quite nicely so later on I changed it
so when you're attaching this wire make sure that you are attaching it to the stone running at the
back of the stone rather than the frame running around the stone if that makes any sense right
so next we are going to bring in some more weaving wire and we are going to create
some more 2x5s so once again super easy five times around the base and then twice
around both wires so I'm going to repeat this until you have got enough of a length
once again the length just depends on um your size why I've just given you kind of the number
that I have used for mine you as I said you're going to need to adjust it for yours because it
will obviously be different right so I'm going to once again bring in my trusty bent nose pliers
really love that tool super handy to have for these kind of things so once you've got that
we are now going to create swirls on the left hand side we're going to follow the initial weave
um but we are rotating this in a clockwise motion and we're going to create swirls
on the right so exactly the same process that we've used on the bottom
just kind of shape until you're satisfied and obviously there's lots of readjusting
going on until you're happy so don't cut off the wire until you've got a good initial shape
film off and just make sure that the wires sit flush and I use my tools to kind of press the
weaves down or the wires rather so that they don't stick out because these kind of swirls are
prone to get stuck in clothing so you need to tie these down really well which we'll get in a
moment so going to shape the bottom one as well same process once you're happy we are going to
continue with the next design and this is the last of the square wires that we are going to
um to work into the design so we're just going to go through the center of the piece
very gently once again you you can twist it actually if you want to um I haven't I've kept
them kind of straight but it would look quite pretty if you gave them a twist before you feed
them through obviously because they're square they give you really beautiful patterns when
you twist them so you could do that as well so I'm just bringing it through the middle of the
frame and then once again I'm going to attach it somewhere um in this instance I've gone around
the bail wires and I've cut off a fair bit because all you need there is a is a quick anchor
you don't need to attach it um um two or three times or wrap it two or three times around the
column so I've just cut it short and all I've done is I've tucked it in behind the bail wires
when I first started my wire weaving journey I was convinced I had to wrap everything three or
four times and all I achieved doing was make everything look bulky until I realized you
don't really need to do that um you know quite often for certain aspects you can anchor it
just once or twice and that generally is sufficient unless obviously you have something
that's load bearing you know like the bezel or the bail or something that will take a lot
of load and friction then you probably need to do a couple more wraps but for something like that
a simple wrap is enough to keep it in place there you go that's what it looks like so next we are going
to tie down those swells now this is quite important I think for me anyway is going to
use some 0.6 half round which is very very fine and the reason why I like using half round is
just that you get um sort of the width surface area of a 0.6 but not the height which makes
everything look a lot less bulky when you especially when you're tying it down and it looks
really pretty as well so it looks like an aspect of the design itself when you're using half round
rather when you're using um your round wires it looks a little bit bulky so secure all the swirls
in place like that so I've put them on every swirl and I've attached them on every frame I could
that's what it looks like so they're attached everywhere at the bottom and the top to make sure
that they are immobile and can't come undone when you're wearing the piece so next we're going to
do the back two wires that we've had left over and I'm doing once again trusty two by five
so five times around the base frame one of those rather the bottom wire and then obviously twice
it's always a little bit fiddly near the frame when you're wrapping so take care when you're
doing the wraps and be slow and use your tools to scoot down the weaves I'm just going to continue
and what we're doing now is we are folding this weave up towards the belt first we're
going in a downward motion so this is all clockwise and then we are following the weave
back up so now what we need to do is you need to decide what you do here what we do here so
you can either create a little swirl like I've done or you can attach both of the wires to the
bail and it's entirely up to you and depending on what you prefer in the look department so I've
decided I'm going for a swirl and see how that goes but obviously you can change that if you want
so next we need to attach the remaining wire to the bail so I'm just going to feed it through
the center now you just need to find the best place where you can add in
um the wire obviously it's still an area where it's quite visible so place it in such a way that
it can't really be seen and obviously tighten it up so in this instance I would probably wrap
around twice to make sure that it's secured this is obviously an area where it can be pulled
um or otherwise manipulated because you're wearing it so once again create a swirl trim off your
wires and then shape there's a lot of manipulating going on until the piece is finished so I spend
quite a lot of my time just adjusting until I'm completely happy um so you don't get to see all
so next one of my absolute favorite settings I've got lots of favorite settings but this one is
fantastic it's for diamond cut gemstones um looks really pretty so what we need to do here is grab
our um square wire once again square wire just because round wire because it's got a flat surface
area it grabs onto the stone better and it's structurally a lot stronger than your round
for these sort of things so we're going to create like a prong in the middle of of the the wire or
leave roughly five centimeters or so to one side and then start so we're going to create three of
those prongs so we're folding one we're folding the wire in half squishing it down very technical
once again and then roll the wire back up before creating another prong now when you are bending
the wire back down placing your pliers on top where the prong is just make sure you leave
enough space to account for the wire thickness when you creating the bend because if you are
aligning the top exactly with the prong the previous prong um it will be too long because
obviously the wire has needs to travel and there is a thickness to that so keep that in mind when
you are wrapping so just grab near the tip about two or three centimeters below and then put the
and you can see the bend add some additional length once you've done that you squish it together
and i tend to squeeze as hard as i can but you have to be gentle because sometimes your pliers
slip and then it can twist the wires and then you may as well start again because
it looks really untidy so that's what it looks like one of the prongs slightly too long
so for demonstration purposes i've used a big stone um so it's easier for me to show you
so what we need to do next is we need to bend the tip of the prong just long enough so that
they comfortably fit over the crown but don't encroach on the table of the stone the table is
the flat section at the top of the stone and the crown is sort of the the beveled edge that runs
on the outside so all you want to do is um cover the stone the the sort of crown but not the table
so that's what it looks like so far going to fold them into each other and next i am going to take
one of the legs and wrap it around the outside the the bottom legs so i'm just twisting very
carefully and just take your time with that and one or two wraps is enough obviously you
don't want to bulk it out too much if you're going to place it in your design
um you want to have this area as inconspicuous as possible so that it fits three wire gaps
so next we need to open up the prongs again so just make sure that they line up before you do
that um if you make sure that they line up it means they are already quite straight when you
put your stone in the center so we're just going to unfold them like so and then i'm going to open
up the wires a little bit so readjust the position if need be and you can squeeze them more if you
want to as well to make sure that the gap is closed and i'm just poking a little bit of a hole
into the base wires to give the stone something to sit on so place it in there and then squeeze
it shut so this takes a little bit of practice but once you have it done and once you get to
do it it's such a beautiful setting now obviously for larger stones i would recommend doing this
with four prongs and this is just to demonstrate to you how to do the three prong but you can do
the exact same process with four prongs if you want more security for your stone that's what
it looks like so far and to make it extra secure um i tend to take a piece of 0.4 or 0.3 depending
on your size of the stone and the wire and i'm just wrapping around um the prongs once or twice
giving the stone some extra weave running alongside you can see in a little inset what i mean
so i'm just folding this as shown and obviously adjust if necessary you can see how the prongs
just cover the girdle or the crown rather and adjust and that's what it looks like
so once you've created your stone setting attach it to the frame here and then trim off the legs
the last thing you need to do is or if you want to is add some accent beads at the top i've used
some 0.6 20 gauge wire for that just because it's a lot stronger than your 0.4 and then all you need
to do is tie it up to the frame and that's the whole design done so that's it you can loss it
if you want thereafter or keep it bare entirely up to you um and that's it thank you so much for
watching i really hope you enjoyed this um as always if you enjoyed this subscribe to my channel
because i upload new stuff all the time and i would absolutely love it if you could share your
designs with me uh in my wire wrap group which is called wire wrap and jewelry artists worldwide
we are a fun bunch and always have some challenges going so come and visit us on there and lastly if
you need any square half round wire in the uk i've got loads of those on my website and i quite
often run workshops and and have tutorials that i sell as well which are a bit more complex than
the ones you get on my youtube channel so there's a bit of variety there um yeah so just gander over
to my etsy shop or to my website and have a look and that's it for me thank you so much