Hey Guys, in this tutorial I will show you how to create a decorative wire frame, create structure to add the seed bead detail, and how to create and add french beading to your piece. Hope you enjoy it! Let me know what you think in the comments, and as always, I am happy to hear any suggestions on how to improve my videos!
We're an artist community (wire and metals) for everyone to share their ideas, post their art, tutorials/events & workshops or ask questions. We are a great buch of artists and have a lot of fun being creative together with challenges and fun projects to create every month.
To see what workshops I am currently running or to get full kits and or loose gemstones, frames for some of my tutorials, square/half round wire & more tutorials visit my web shop:
Materials: - 0.4 mm (26 ga) wire - 5 m of 1 mm (18 ga) wire - 1 large tube of 11/0 seed beads (choose your colour in the drop down menu)
Tools you will need (not included):
- Flush cutters - Round nose pliers - Chain nose pliers
Hi guys this is Nadia from Emanic Crafts and today I want to show you how to create this seed bead
jungle pendant and suncatcher. If you haven't already hit the subscribe button because I
upload new stuff on a regular basis. I quite often make pdf tutorials for the videos I've put up on
here. They also come with kits. I have all sorts of gemstones, square half round wire and beads and
all sorts of nice goodies on my website. So I will pop a link below and you can take a gander
over and see if there's anything you fancy. Last but not least we have an awesome wire wrap group
which I will also pop a link below. So take a look and come and join us. Right let's get started.
So I'm going to demonstrate to you on some shorter sections of wire. Obviously you need a lot
more wire than that I'm going to use here to show you. It's just easier to
show you the weave on a small piece. So we're going to take our weaving wire, fold it in half
and we're going to wrap it around the base wire once before picking up a second wire. Wrap it
around wire one and two. Then slot it in between wire one and two. Bring in a third wire. Wrap it
around wire two and three and bring it in between wire two and three. Bring in a fourth wire. Wrap
it around wire three and four. Bring it in between wire two and three and then the fifth wire. So
we're going to wrap it around four and five and we're going to bring the weaving wire in between
wire two and three and wrap it around wire three and four before bringing it down in between wire
one and two and wrapping it around wire two and three and then lastly wrapping it around wire
one and two. And then we're going to go around the base wire five times and this is called the
one row weave wire, at least that's what I call it. And then we're going to repeat this exact same
procedure except that for the next set it is only with the four wires. We're only going to go around
the top fifth wire every four revolutions of this. So we're going to go around again wire two, one
and two, then around wire two and three and then around wire three and four and we're not going up
to the top. We are going to go back down so it means in between wire one and two. It's not going
and then wrap it around wire two and three and then going back down around wire one and two and
then we start with our five wraps around the base and then we're going to repeat this. There's a
inset on the left here that shows you exactly how the pattern looks. So once that's done we've got
a full length. I think I've done about 11 or so sets of the weave. We're going to remove the
outer base wires and we're going to be left with just two wires on the bottom and this is so that
we get the sort of ray sun effect on the outside and the wire is actually quite strong and stronger
than you think. The thicker weaving wire you use obviously the stronger the rays will be.
So what I'm doing here is just shape the initial pendant or sun catcher whatever you'd like it to
be. I decided for this I want it to be sort of an oval shape but obviously you can do any shape you
want. You can make it any size you want as well. Obviously just remember if you're going to make
it larger step up the gauges by one size just to make it a bit more sturdy. Obviously the bigger
it is the more structure it needs. So I'm shaping it here and I am just using my fingers to kind of
get the initial shape right and then I'm bending out the outermost wires and the two innermost
wires are going to be used to create the bail. So I'm using my pliers here and just below the
weave I'm going to put a bend in it and I'm going to do the same on the other side and I'll push
the weave in a little bit before I bend just to make sure it's all nice and tight and then I'm
going to line these two wires up so that they are parallel to each other and this is sort of the
beginning for the bail. There you go, straighten out a bit and then kind of close off the pendant's
uncatcher and straighten out the wires. That's kind of what it looks like. So the next step is
straighten out the wires a bit more here is to kind of join the two sides and I'm going to use
some leftover wire. If you've got enough wire left over from the weave you can continue on
to the bail with that. I didn't have enough so I had to add in I think another section so
all I'm doing here is I'm joining the two innermost wires or actually all four of them. I can't really
see without my glasses on. So you can either join just the two but four is better obviously because
there's more structure to it and all I'm doing here is a simple figure of eight weave around both
of them and then I'm going to shape the two innermost wires and these are going to be my bail.
So obviously again you know you don't need to do this like that you can just have it a straight
weave you don't have to do the bail like that if you just want it to be a sun catcher so you can
just do a straight weave. So I'm shaping this into a kind of navette shape or maki shape depending
on where you're from. I call it both depending on the mood and then I'm going to bend the wires
at the top so that they are parallel once again and this is kind of the initial shape. So bring my
pliers in and kind of you know take your time with that and just make sure that both sides are equal.
So next I'm taking a fresh piece of wire if your length isn't enough that you have left over and
all I'm doing here is I'm wrapping around one side twice before I'm crossing over to the other side
or I think I'm wrapping three times. So wrap it three times the more wraps you put on each side
the more open the weave will be on the inside so it'll be a tighter weave if you only wrap twice
and it'll be a very loose weave if you do say five wraps on one side then you cross over to
the other side and do five wraps there and so forth and just make sure that you don't pull
too hard when you get towards the center it can get a little bit slippy because obviously it
narrows down. So we continue on and here I'm going to show you what I mean by the slippy bits
because obviously the wire narrows down again towards the top the weaving wire has a tendency to
to slip up so what I do here is on each side when I'm wrapping two wraps are important so that the
wire has something to grip on. I put my thumb or my nail anything to hold the wire in place
and then I move over to the other side and very gently do my wrap. So it's really important not
to pull too tight otherwise it will just distort the shape. So once we get to the end I'm just
kind of tying the two legs together and just finishing off with the same weave that I started
on. So just keep wrapping once and twice around one wire before moving to the other side and then
twice around the next wire and that's what the bail looks like. So really easy and a nice practice
sort of design and the next step is to shape it. Some people like to use a tool for that I think
this is easy enough to shape with your fingers if you've got more control over you know how to
shape the actual bail and I'm kind of making sure that it's balanced and that the sort of bottom
half of the pendant is in line with the with the midpoint if that makes sense. So I'm feeding the
legs through the center and I'm just going to wrap these round and on each side of the bail once
just to give it a bit of structure like so and this will be enough to hold it in place.
Same on the other side so just fold it over and just try not to bend it over a
ray or whichever we want to call it so that it doesn't distort. That's what it looks like.
So next going to trim off those ends and just make sure you trim them in such a way that
um they don't stick out so usually I wrap the 0.4 wire around something else to tuck it away
so it doesn't get stuck on clothing and we're going to be using the the structural wires that
are left over to create a kind of backing for our shrub to be attached to. So I'm creating the loop
here and as I always do with my wire ends I use my round nose pliers and I apply a little bit of
pressure that will narrow down the tips of the wire and as I press I also rotate and this will
give the sort of tapered look at the end and then I'm kind of arranging the curls whichever way I
want to be. It's not too important where and how because obviously these are going to be our backing
um so not too fast on on where they go but obviously still try and make them as neat as
possible. So we're going to do the same with the other side so remember to thin out your wire with
your pliers and obviously you know you can cut these off if you wanted but then you wouldn't
have any structure to attach your vines to so you need to have a little bit of something
to curl so that you have a space where you can add the bush or the shrubbery that we're going
to add just now. So very gently rotate this and you can see I grabbed the wire on different areas
just so that I have better traction and I can rotate them in. So once I'm satisfied with the
shape I'm going to cut another piece of weaving wire which is 0.4 which is 26 gauge and I'm going
to give these two wires a little bit more structure and this is going to be done by a simple figure of
eight weave. So the way this works is I wrap the weaving wire once or twice around one wire like so
and then I'm going to move across to the wire on the other side and I repeat myself there
wrap it around twice before coming back to the other side. This is a really simple weave and
great if you're a beginner and you haven't done any weaving before to kind of learn the control
of wire and the tension and just how generally weaving feels. So this is just called a very
simple figure of eight weave and we're going to carry on with this until we reach the end like so
this kind of lays out a bit and this is enough to give it a little bit of structure.
So next it's time to make the vines and so I really enjoy doing this I've done whole trees
with that it's a lot of fun and you need a piece of 0.4 26 gauge wire and we're going to pick up
to begin with seven beads I think I've only picked up three here so it depends oh sorry no it's three
beads to begin with this is the the finest point of the sort of vine. So we're starting off with
three beads in the middle and then we're going to give it about five twists and then we're going to
pick up more beads and in this instance I think it's another three so we're going to put three
beads on either side of the initial twist and just make sure to bring the wire in as closely to the
the stem as you can and be very careful when you're twisting because at this point if you
over twist the wires break really easily under tension but just make that make sure it's as
neat and tidy as possible. So then we're going to give them another five twists and we're going to
pick up another three beads and we are going to oh it's four in this instance so each new
set of leaves we're going to create picks up another bead so I'm starting with three and then
it's four and then it's five and then six and obviously the more beads you're going to add
the bigger the vine itself and obviously I'm putting five twists in this here but you can
make the vine much shorter and stockier if you maybe put only three twists in between each
leaf so depending on how thick or long you want it to be you can sort of modify the way this looks
and make it to your liking. So I had a sort of a mixture of long vines with lots of leaves and
then I had short vines with lots of weaves and just to make it a little bit more
of a rye and I change it up a bit you'll see just now so there's some short ones and just so that
it's more of a sort of shrubbery effect I wanted different size beads so you probably create about
five long ones and five short ones and then maybe three really short ones and the next step is to
combine them all together so I'm starting with the longish ones and I am grabbing about three
of them and giving them a quick twist not too much we're going to add more just picking up
the shorter ones and giving those a bit of a twist as well I actually really enjoy this technique
because it's it's quite rewarding when it comes together it looks quite nice once you have put
these all together so I've twisted three of them and then I'm going to pick up the really small
ones and do the same thing again these all together and give these a little bit of a twist
you can see I've got quite a few of them and obviously as I said earlier you know you can
decide you can also make flowers with this I've only made leaves here but you can also create
flowers if you wanted to it doesn't have to be just leaves different color seed beads
then once you're satisfied with the amount we're going to pick up all of the little branches we've
just created and give these a little twist you can see here I separate out two halves of the wire to
get more of a grip before I twist and then you can kind of arrange the leaves and to your liking
and spread them out a bit before we're going to be attaching them to the actual pendant
and as I said earlier you can add more if you wanted to take some out make them shorter make
them longer entirely up to you right next step is we're going to be adding these to
the actual pendants obviously there's a lot of wires there and so we're going to get rid of some
so the way I do this is to bring some of the wires up to the front because obviously you want to
reduce snag risk and when you cut wires there's always a snag risk so I always tend to put them
where I find it you know there's the least sort of risk of them getting stuck on anything so
bring them to the front pull them through and they are now kind of hidden in the foilage so
now I'm going to trim them off with my fine-tipped pliers these are tronics by the way which are
great for reaching into areas that are hard to get to fine tip so anything that you have that
has got a fine tip like that I think is quite an essential tool once you get going with your
weaving a little bit so quite useful so I've got these trimmed off and I've got these
remaining wires left over which you're going to be using to attach this to the frame
so I've taken the wire through and we're going to be attaching these here there and everywhere
you can find a space to the frame and obviously remember to bring them through to the front
to tuck away loose wires so next we've got we've got the frame wires left over so if you wanted
to you can create a little swirl design on the side for whatever reason here I can't remember
why I decided to just trim these off so I made a little swirl at the top and brought it all the
way around to make sure that the end sort of points towards the foilage and trim off the end
and I'm going to do the same on the other side I always tend to go kind of clockwise
into the frame so that the wire ending points towards the middle but obviously as I said you
know you can go in different shapes down the bottom wherever you like so that's what it looks
like and I'm going to finish this off with my pair of round nose pliers and I always squeeze the end
and rotate this in and just make sure you tuck it away nicely and do the same on the other side
roll it in and then that's what it looks like so arrange them to your liking
it looks like so far so next is the remaining wires at the back going to be trimming these off
so remember as closely to the end as possible so they don't get hooked on anything
and that's the whole project complete so the last thing to do here is to run a section of
beads across the top of the bail and you can use anything you like copper beads or gemstones and
I have used seed beads in this instance because I thought they look quite nice and yeah that's
the whole thing finished so thank you so much for watching I really hope you enjoyed this
don't forget to subscribe and visit me on any of my social media I've got instagram facebook and
even tiktok and my wire wrap group if you want any artist support is called wire wrappers and
metalsmiths worldwide and we often do lots of challenges it's a fun little group and people
they are awesome if I may say so myself and last but not least visit my website for square wire
half round wire kits pdf tutorials gemstones and whatever you like so I'll put the link in
the description and you can take a gander and have a look and that's it for me and see you soon