In this tutorial I will show you how to design and construct a whimsical wire pendant with an articulated component. I will show you how to construct the frame, create detail and add components as well as how to set various stones. Hope you enjoy it! Let me know what you think in the comments, and as always, I am happy to hear any suggestions on how to improve my videos!
We're an artist community (wire and metals) for everyone to share their ideas, post their art, tutorials/events & workshops or ask questions. We are a great buch of artists and have a lot of fun being creative together with challenges and fun projects to create every month.
To see what workshops I am currently running or to get full kits/PDF frames for some of my tutorials, square/half round wire & more tutorials visit my web shop:
Materials you will need: - 1.6 mm (14 ga) wire - 0.6 mm (22 ga) wire - 1.6 mm (14 ga) half round wire (The video says 2 mm but that's wrong) - 0.4 mm (26 ga) wire - 18 mm oval cabochon - 4 mm diamond cut gems / drilled beads - 5 mm diamond cut gems / drilled beads - 8 mm diamond cut gem / drilled beads - 2 mm copper beads - 2.5 mm copper beads - 3 mm copper beads - 4 mm copper beads - 5 mm copper beads
Hi guys, this is Nadia from Ipalic Crafts and in this tutorial I want to show you how to create
this whimsical moon pendant. If you haven't already hit the subscribe button because I
upload new stuff all the time. I quite often make kits and pdf tutorials for the videos I upload
onto youtube so I'll place a link in the description below and if you fancy you can
take a gander over and see if there's anything you like. I also invite you to join our awesome
artist group on Facebook just called Wire Wrap and Metal Smith Artists. Well right,
right let's get started. So I'm going to begin by creating the base frame. So the wire needs to be
quite thick obviously because it's going to carry the structure. So here I'm folding it in half with
my bell making pliers. I love these because they've got different sort of steps and this
enables you to create different sized loops. So it's quite worthwhile to get one of these
and you can find these on eBay, Amazon, pretty much everywhere there's crafts. So what I've done
here in the middle I have created a small loop, not too big and not too small, just enough to sort
of carry a jump ring. The smaller the loop the more space you have for for an appendage if you
can call it that in the middle. You can get the template for that if you want for the right size
and shape from my shop otherwise you can just draw it on a piece of paper or just do it freehand
as I'm doing it here. So I'm just shaping it and this is what it looks like initially.
So next I have to decide how big the moon's going to be so I'm going to fold the wire at the point
where I don't know what you call the tip on the side anyway so anyway I'm just going to bend
the wire backwards on itself and I'm going to bring it back up to the middle and obviously
both sides need to be symmetrical so that's why it probably helps if you measure out the wire.
I just tend to do it by eye which is sometimes why my things are a little bit wonky
but this works so we're going to do exactly the same on the other side as well once we are
satisfied with the shape. I squeezed the tip together with my pliers to narrow it down to
point a little more. Currently at the moment I'm still kind of shaping it so that I'm happy with
the actual shape itself before I do that. So next we're going to do the other side as well.
So this is it so the other side is done and I have made them as symmetrical as I possibly can
which you know just take your time with that because this is obviously the base frame so you
need to be as neat and tidy as you can. So as I always do with endings when I create a swirl
I squeeze the tip of the wire as I rotate my round nose pliers and this helps me to
narrow the tip down to a point and gives me a very fine tapered sort of ending to my wire.
I quite often get asked how I work with sort of heavier gauges and my answer to that is always
you know don't fight the wire. When I first started weaving I had a death grip on everything
I was working with it made it really difficult to kind of control that so just loosen your grip a
little bit and you know let the wire sort of you know lead the way. So that's what it looks like.
So next we're going to do the same with the top. So I'm going to shape the leftover wire into a
swirl as well so once again I'm going to squeeze the tip. Now you may need to trim down your wire
depending on how long you had it so all we want at the top here is a small loop again to you know
attach a jump ring later for to be able to wear it. So all this is creating a small a small loop
and this is another reason why the wire has to be heavy gauge obviously we don't want to be using
finer gauges you know these loops would come undone if you're wearing it due to the weight
of the pendant so a heavy gauge no less than you know your 1.6 your 14 gauge um would work you
could obviously but it wouldn't be as sturdy. So next once we're satisfied with the shape always
spend a bit of time arranging it until you're completely happy. We are going to weave a 0.4
and all I'm doing here is I'm going once around each individual wire like so and then once I
have done that I go once around both wires at the same time so I'm going around both and then
around each individual once and this is a very simple weave it's just to bind the two components
together so once around each wire like so and then we are going to go once around both wires
and then we just continue with this weave until you have enough of this attached to make sure
that these two pieces are nice and tightly woven together and then that's what it looks like.
So next I'm going to bring in the component wires or the sort of detailed wires and I'm going to
fold this in half this is one mil 18 gauge wire and I'm folding it in half and I am attaching it
to the moon on the inside and this is going to be our first sort of detail so it takes a little bit
of fiddling until these are tight and I'll usually squeeze them down with a pair of pliers just to
make sure they're tight and then what we're going to do is rotate the first wire in an anti-clockwise
motion and you're going to fold the wire upwards like so. Now obviously this is a very organic
design I'm trying to show you exactly what I've done but obviously your pendant will never be the
same as mine and the next person because it's a very organic design it's going to be difficult
to recreate exactly so I'm pausing quite a lot between steps to show you what I'm doing and
because there's a lot of steps and they can get quite confusing so you will obviously do your
own thing so I'm just showing you how I'm doing mine so that you get an idea of how I put the
design together so obviously just give it your own spin. So once we have folded the wire I'm just
going to bring it upwards and I'm going to attach it to the frame like so I always attach it in
between because that gives the details a lot of structure so that they're not too loose and they
don't sort of bend out of shape when worn so that's what it looks like so far. So next I'm going to
take the top wire and I'm going to again go in an anti-clockwise motion I'm going to bring it
back down and follow the initial shape and this is kind of how I get my flow and everybody has
you know their own techniques and how they like to do their designs so I just kind of you know
play it by ear this is as I said a very organic design. So I've brought it down and now we're
So I've attached it now and I'm trying to not show you every time I attach something so that
you know we won't be here for two hours because otherwise it would take a long time to get through
this tutorial so I won't show you the initial steps and when it needs attaching like so I won't
always show it because you've already seen me do it. So I've brought the wire downwards on the
outside of the moon and sorry I've shot here so I'm going to rotate it in a clockwise motion this
time this is slightly and again I'm going to follow the initial swirl and going up to the top
like so and I'm going to then bring it inwards on the right hand side you can see and I'm now
attaching this wire just below the two swirls on the top to bring it through and I see me here I
keep my thumb and fingers over the wire so that when I pull to tighten the wire around the frame
I don't distort the shape I have just created so almost keep your thumb over it to help you
maintain the shape you've just worked to to create like that and just place it so that's what it
looks like so far and I'm just going to adjust it and tighten it up some more so next I've attached
it and I'm going again in anti-clockwise motion to create a swirl and I am going to fold it back
down sometimes I use different tools to adjust my wires this time it's a very fine tipped chain
which is one of my favorites that was a cheaper I bought somewhere on ebay I think it's my absolute
favorite pair of pliers because the quality is so good it was a no-name brand if you go on ebay I'm
sure you can find it everywhere but it's lasted for a long time so next I'm going to attach the
remaining wire to the outside of the moon so I'm just using my round nose pliers here and I'm using
it to roll the wire there's not much space here so I'm using that tool to kind of shape pre-shape
the wire before I feed it through the frame because it kind of helps with the space so just
use any tool you have available and attach to the outside so that's what it looks like so far
and now we have attached everything at the bottom and tighten it up and shaped it to my satisfaction
so we've got a little bit of wire left on the inside here and there's not much you can generally
do with that so you can either cut it off or just use it to create something else I always like to
use all my wires that are attached in some way that's why my pieces always look like an octopus
because I hate to cut anything off in case I want to use it later and so I always have a thousand
wires hanging out as you may know and so with this one I am just swirling it in an anti-clockwise
motion and I'm going to sort of figure out where I'm going to place it so now obviously this is
going to happen with your designs as well so just get creative and play around with different angles
and you know different shapes and that will all put together to the design so once I've decided
where I'm going to put it I'm going to taper the end again as I always do squeeze the end of the
wire with my round nose pliers as I rotate and this obviously gives you this fine tip that I
like because it just looks a lot neat and there's a much quicker to achieve than as if you would
file down the wire at a later stage you can see me here just working the tip and rotating as I work
to get shape and then I'm going to place it now obviously the section later is loose so
later on you need to tie it down with a piece of 0.4 26 gauge wire so next step is um you don't
have to do this but I thought maybe quite nice and I'm going to hammer the tip and for this I'm using
my domed chasing hammer I flatten out the tip ever so slightly and then I'm going to just
press it down in place and that's what it looks like so far next I'm going to grab another piece
of wire and I'm going to be attaching it to the inside of the moon on the left so again find the
midpoint and fold it over and I usually attach it twice to give it a little bit more strength
you can do it three times that will make it even stronger so feed it through and then
just attach and that's what it looks like so far just tidy it up a bit
so now I've neatened it up and I'm going to always squish down very technical term as always
squish down the wire to the frame it gives it a lot more strength so then I'm grabbing the
innermost wire and I'm going to give this a rotation in a clockwise direction and I'm following
the sort of inside shape of the moon and I'm going outwards towards the top and as always
just correct your shape as you go along I usually sort of get the initial shape right and then I am
attaching the wire to the frame that's what it looks like to start with so next again um I'm
going to hold my finger over this wire as I said earlier because otherwise it would distort if you
don't do this so it's very important because otherwise you can't put any force on the wire
you're attaching to the frame so just place your finger over everything and keep it in place then
you've got a lot more room to to exert a bit of power or pressure whatever you call it to
attach that wire to the frame you can see here I'm kind of using my chain nose plier to aid me to
get that wire tightened up and if you do this gently enough you won't actually mark
your wire so just press ever so gently and you can see me pressing as I rotate
there you go so this is attached leave a little bit of room at the top so that you get a sort of
loose effect if that makes any sense go to the bottom and I'm now rotating the bottom wire
sometimes you do your fingers aren't you know good enough to do the rotations I use my tools
to start the swirl and then I continue with my hands so I'm following the initial line
and which creates the flow and then I am going to go to the inside of that first wire we've placed
and before I attach it I always kind of check it out and see if I'm happy with the
the actual placing and the shape and so forth and that's what it looks like right so once again
I have attached this and um or I haven't attached this you can't really see so I'm
going through the frame and I'm bringing the wire through and placing the second wire
next to the first pulling it through and straighten the wires out and as always once
I finished with one of the details I squish the wires down to make sure they're nice and tight
straighten them out a bit and now I'm going to continue my rotation and I'm going to go
in a clockwise motion this time so very slowly and if you hold the wire a bit further away it
gives you a bit more room to maneuver the the actual swirl is not too close so that you don't
have space to create the shape so then I'm following the inside and I want to come back
to the inside of the frame so here we are and I am holding my finger over the frame itself
and I'm shaping the wire to be able to attach it to the frame and here you can see there's
not much room to maneuver so I'm using my tools to help me attach the wire to the frame
because it isn't always possible with just your fingers so I'm pressing and this is what it looks
like so I can always take time in between details to you know press down rearrange and shape it
until I'm actually happy before I move on to the next step and just because it's much easier to do
it there and then rather than try and adjust the whole design later on so that's that attached
next I'm going to use the leftover wire to create a little detail going back up to the top and once
again I'm using my tools to start to swirl grab it near the bottom because you've got a lot more
leverage near where the wire is attached because obviously the shorter the wire the harder it is
to manipulate so I'm just trying to find a nice shape and then I am attaching it wherever I feel
it would look nice so here I am decided I'm going to attach it near the tip and I'm going through
the front of the design and I'm going to just wrap it around the frame using my tools and again
because the wire is obviously quite short it's quite difficult to manipulate so your tools are
very useful in this instance and see me just rotating as I am pulling just to attach this to
the frame that's it so we've only got one wire left straightening it out and once again give it
a good squeeze and straighten it out as much as you can and I'm using my fingers and my thumb to
kind of shape the wire into place sometimes a little pressure is needed and then I'm just going
to decide where I'm going to place and I always follow some of the previous sort of shape just
to create more flow so I'm coming from the outside back to the inside and this is what it
looks like so I'm going to be attaching this to the frame once again with my tools and obviously
this doesn't have to stop here if you want you can add as many wires as you want and so just keep
going if you want to add more detail to the pendant this is basically just giving you a starting point
on how to create this kind of design so I follow that so that's what it looks like so I've got a
little bit left over and I'm going to shape this into the last detail again using my thumb here
I'm going to create a small sort of swirl at the bottom I always think about add-ons that I'm going
to put onto the piece which in this case are going to be sort of round focal stones so I always
envisage where I might place them so I leave enough room to put them in which doesn't have
to be accurate but just bear in mind you would like if you want to add accents to leave enough
room for the stones to sit in so I'm going to add this wire attached to the frame there's not much
left of it so again your tools are quite handy in this case and I'm going to attach it here and
that's the back side go through there and that's what it looks like so the last details I wanted
to have some thicker looking components so this is half round wire and I'm going to show you here
how to put them make them into swirls so I tend to bend a 90 degree angle to create this kind of
swirls and just because I find it easier other people do it differently this is just the way I
do it and I grab hold of it with my pair of pliers and I twist as I go around now you have to be
careful when doing this so that the wire doesn't kind of go sideways with the edge up so really
just take your time with that and rotate the wire into itself now also be very careful not to exert
too much shear force because the wire will actually weaken and break where the angle where
the bend is so you have to be very careful when using your pliers and rotating because the wire
will basically shear so just practice a little bit and let's you know use copper for that I went
through quite a bit before I started to be you know happy with the shapes I was creating so
just practice a bit because it adds a lot of beautiful detail to designs and I really like
using half round wire you know in my designs just because of the sort of bigger surface area and
it's not as thick as it's wide so it's great wire for detail so that's what it looks like
so far just squeezing down the swirl a bit more so that's all the components now obviously you
need to create different components for different spaces so you know depending on how you have
created your moon you will need to find areas where you think your components will fit so in
my case I had three spaces where I wanted to put them one on the right where the long
sort of first swirl was so I've placed it over the top here created another swirl
that would fit that space and you need to do the same so you know yours will obviously be
different so you need to create swirls that will suit the space that is available in your design
so you can see me here rotating the wire around the frame which makes it much easier to attach
and you need to bear in mind that half round wire work hardens incredibly quickly so just one or two
bends in the wire and it will become completely irresponsive and it won't work and it's
going to be very hard to manipulate you can soften it up again with you know flame so you can anneal
it again but I try and just work it as much as I can in one go and so use your tools for that
and I'm going to be attaching it to the frame just using our pliers and that's what it looks like so
with the leftover wire I've got quite a long length left here at the bottom which I'm going
to attach and this can be used to create detail on the outside so that's a long length of wire
I'm just going to add detail with that on the outside and that's what it looks like attached
so next I'm going to be attaching my detail on the left again you need to make it fit your shape
and whatever sort of design you have so I'm using my pliers again to attach
so I'm helping I'm creating a sort of shape in order to be able to attach the wire to the frame
I'm going through here and I'm using my pliers I quite heavily rely on my pliers especially with
thicker gauges of half round wire because your fingers or my fingers anyway just aren't strong
enough to to attach so I'm just going to carry on attaching this until I'm satisfied that's what it
looks like so lastly I've got the last piece here sometimes when creating these designs you want to
create the illusion of sort of recess and 3d so to achieve this I sometimes you know make wires
disappear and the other wires if that makes any sense so I'm bringing this shape in from underneath
and I'm pulling it out the top so that basically the top end of the swirl will attach near the top
of the pendant and then the sort of ending of that wire will kind of disappear in between the
sort of detail of the rest of the pendant I hope that makes sense and this is just so to create a
little bit of detail and I'm obviously going to attach these on to the frame on both sides
and that's what it looks like so next is a liver of sulphur so I really like to use gel just because
it has a longer shelf life then you sort of liquid I've had this one for six months now and
it's still good you can get it on ebay amazon again anywhere and they sell craft stuff heat up
the water wire with it's just wire it can be very hot obviously when you have gemstones be very
careful some of them are low on the Mohs scale so they will get ruined by loss so just google your
before you put them in the solution and it gets dark pretty quickly so that's what it looks like
when it's done so next we need to neutralize the liver of sulphur so I'm putting it in
a container that has water plus bicarbonate of soda you can see how nice and dark it went
and the bicarbonate of soda will neutralize the chemical so you can put this in water or
on the piece directly and just brush it off and then rinse it you can also use the bicarbonate
of soda to neutralize the solution if you don't have any more pieces to to oxidize because obviously
you can't just chuck this down your drain you need to either wait a couple of days for it to
neutralize by itself or you need to neutralize it with the bicarbonate of soda so once you've
neutralized it I'm just going to give it a quick rinse in just water to get rid of any residue
and that's that a little rinse and then we're going to move on to the polishing bit that's
what it looks like very dark so I've got a really old towel that I use because obviously
the loss will make your fingers black so I have an old towel that I'll use to get rid of the sort of
heavy residue first and then I'm going to take one of these steel brushes now these brushes are
wonderful I get them off Etsy sorry eBay once again and they come in sort of sets of three you
get a brass brush a stainless steel brush and this just sort of normal bristle brush
and they use it to get rid of all the sort of surface stuff and get into little recesses
and they're really good just be careful because they kind of hurt your fingers if you stab yourself
with them so be gentle with it because it can hurt so and obviously don't go over gemstones
with this because this will scrap so this works well for wire but be careful over gemstones with
just keep brushing until you get most of the black stuff off and that's already looking good
so this is one of my favorites I've got several polishing steps and so this is using my radial
brushes and these come in different grit strengths so again all of these you can buy in different
craft stores on eBay Amazon they will carry them I think these are called m3 brushes I'm not too
sure and the different colors mean that they are different grit strengths which will you know give
you either a rough sort of polish or a more high shine polish I really like using them because
it is quick and it gets rid of a lot of the oxidization in places where you want it to go
now I'm using this in conjunction with my Dremel you can also get fittings that will fit a four
dom or different tools but generally a Dremel will work well with those a Dremel you can also
get quite easily online they're not too expensive and I have to say that I've used mine a lot so
it's well worth the investment and if you want to look into it just go on eBay and search for
for Dremel you get different varieties with different attachments and they are wonderful
tools that are very helpful in your wire wrapping journey so obviously I'm going to do the back as
well be careful again not to go over gemstones if you have any so now I've got different tutorials
for these settings I thought I'm not going to put these in here otherwise we would be here for two
hours so I will pop links for both the lollipop setting and the prong setting in the description
below so that you can follow the instructions there and then come back and then add them to
your design so I have just added them wherever again like with the the sort of half round wire
I just dot them around my design wherever I feel they would fit so this big one had a nice
sort of space waiting for it near the middle so I'm just separating out the two leftover wires
and I'm using this to attach to the main frame just using my tools to kind of pull the wire through
and just give it a good few wraps it's quite important that these are tight you don't want
them jiggling around your design so give it a nice tight wrapping wherever you find space and
obviously hide as much as you can and these coil settings again dot these around wherever you want
so that's what it looks like and adding beans same applies as with the half round wire and
the stone settings wherever you fancy to add any in again this is obviously organic design
so wherever you like to add these just dot them around the design and that's what it looks like
so far last but not least this is similar to the lollipop setting except that it obviously doesn't
have the same sort of process I'm using very thick wire here because obviously this is a pendant
sort so this is again your 1.6 14 gauge here because I don't want the stone to fall out
because we're only having one or two wraps so I've created a 90 degree bend near the bottom
because that enables me to use my pliers as leverage as I twist so create a little platform
for the wire to put a stone to sit on and then you can see me here as I said earlier don't fight
the wire just go with the flow so I'm very gently bending it around the stone as I hold on to
to the wire itself you can see it doesn't really want to stay just yet
so it'll take you at this stage it's quite loose so you just need to practice a bit
until the wire stays in place once you have the first sort of wrap created it gets much easier
so now I'm holding I'm using my fingers to kind of hold press the stone down and then I am shaping
the wire around the stone itself just have to you just have to going to keep your finger on it
and then shape so once you get to this stage the wire around the top will prevent the stone from
slipping and then you have got a lot more leverage to actually wrap around the stone
just keep swirling it and sometimes you need to adjust the wire at a later stage
and I generally tend to go around the stone until I am able to wrap the wire over the sort of
camber if that makes sense of the stone so they can't slip out
and you'll see kind of the biting point where the wire prevents the stone from falling out
and I adjust the back and I think I need to go a little bit further maybe
I don't know if that was all right so next the wire is obviously far too long
and but I like to have a little bit longer because it gives me more leverage to do the wrapping
so all you need to do now is create the loop from the top so I'm twisting this around my round nose
pliers and then I'm just going to trim it off near where I think the center is cut them off
and then obviously adjust the loop with your round nose pliers until you're satisfied so just
make sure it's nice and central and then I'm going to adjust until I'm happy with the the actual
shape here you can see me squeezing the wire ending again and lastly just trim that bit off
at the back this was only useful to help you create the initial shape and because the wire
is so strong it holds the stone last but not least we're going to be attaching this
to the moon pendant itself and that's the whole pendant done so thank you so much for watching
I really hope you enjoyed this and don't forget to hit the subscribe button
and I would absolutely love it if you would come and visit me on any of my social media
I've got an Instagram, Facebook, TikTok account and we have as I mentioned earlier got this
awesome artist group on Facebook which is called Wire Wrap and Metalsmith Artists Worldwide
so please come and join us we're such a fun bunch and there's amazing support on the website from
all the members and last but not least pop over to my website and see what other tutorials,
kits and pdf versions and gemstones you fancy and that's it for me thank you so much for watching