In this video I show you all the steps I take to make a rock sphere. In this case the rock is a beautiful West Texas moss agate!
Join me as I take an Ethiopian opal from the rough, carving and polishing it from start to finish. The opal came from the great @PulitzerOpal and I used the Gemfish torch from @blackopaldirect during the process. Watch the opal transform, see how the torch performs, and find out how the finished stone turns out. What do you think of the final result? Let me know in the comments! Timestamps 00:00 Rough Ethiopian opal @PulitzerOpal 00:35 @blackopaldirect Gemfish torch 03:44 Carve and polish Ethiopian opal 08:28 Final stone and drying process 11:51 Drying stages 14:00 Thanks channel members
In this video I will make a beautiful cabochon out of this ugly duckling beach rock I found on the shore of Lake Superior. I cover all the necessary steps to create a shiny cabochon out of this rock. #jewelry #cabochon #rockhounding #lapidary
I put together this video to show you all of the steps needed to take a self-collected rock and turn it into a polished sphere. Enjoy!
I'm super excited to share this addition to the shop. In this video I go over this trim saw from Hi-Tech, we make our first cuts on it and I share my thoughts on it. Overall, it is a very welcomed addition to the shop. Thanks for watching Be sure to visit our channel sponsor Hi-Tech Diamond and use the code 'currentlyrockhounding' for 10% off your order excluding machines. https://hitechdiamond.com/collections/saw-machines/products/6-inch-trim-saw?aff=12 Thank you for your support! #CurrentlyRockhounding #Rockhounding #Lapidary
Let's unbox, set up, and cut some stones (agates & porphyry). I am using, for the first time, a 4” or 5” lapidary trim saw from Hi-Tech Diamond and during this unboxing, setting up, and cutting rocks video, we are going to test it out and I give my honest opinion on what I think of it. Please let me know if you have any saw related questions in the comment section! Thanks for watching! PO BOX: Taylor's Rocksmithery Po Box 3139 Duluth, MN 55803 #rocksmithing #geology #rocksmithing
In this Lapidary 101 video I show you how to make an amazing stone cabochon using a dop stick instead of doing it by hand. I'm working on a preform of Tahoma Agate from Washington, USA, and discuss techniques of holding your cab and how to maximize efficiency and speed when cutting your stone! Scared of agates and jaspers because they take too long to cut? Watch this video!! A couple key tips and tools will cut your time down so you can shape your stone as QUICKLY as possible.
Wondering how to cut hyalite opal/bubble opal, but don’t know where to start? In this tutorial, I’ll show how I cut this material starting from how to select your rough to getting that perfectly shiny final polish. It’s best if you have a basic understanding on how to make a cabochon to start with. This kind of hyalite opal is only found in one known place: Milford, UT and currently run under the Rock Dreams Claim (as of 2021 when we visited). Mark and Pam Marriot, the wonderful owners, have opened their claim to fee digs to collect this rare and special material. You can find out more about some of the other opals they find there (like wildfire and bacon opal) on their Facebook page or contact them about collecting material: / wildfirebubbleopalclaim I have to make a shout-out to Kenneth Shelley, our amazing guide out at the claim, who helped put us on some spectacular material and also answered all my questions on how to cut this material since it can be a little intimidating at first! Enjoying my free lapidary tutorials and want to follow my socials and website? Consider contributing to my video fund so I can get equipment to make better quality videos for more in-depth tutorials. You can find the donation link, my socials and shop link here: https://bio.site/caitlinalbritton Chapters: 0:00 Introduction to Hyalite 0:59 Selecting Material from Rough 7:19 Sawing Hyalite Opal Rough 7:31 Analyzing Sawed Rough 16:27 Selecting Cabochon Shape 17:53 Making a Hyalite Opal Cabochon 20:51 Finished!
I finally made a puddingstone sphere. I'll show you the whole process from rough rock to shiny stone orb. – ETSY – If you'd like to buy some of my creations, this is the place to do it. https://michiganrocksbyrob.etsy.com – MERCH – Buy Michigan Rocks shirts and other merchandise here. https://michigan-rocks-shop.fourthwall.com/ – HIGHLAND PARK LAPIDARY – Highland Park makes some high quality tools at reasonable prices. They also have the best price on grit that I have found. I make a commission if you buy something through this link. It doesn't cost you extra. https://hplapidary.com/?ref=ROBERTABRAM Use promo code MICHIGANROCKS for 10% off rough rocks and accessories. – KINGSLEY NORTH – Kingsley North is a lapidary store in Michigan's U.P. They make a great cab machine and sell many other brands too. They have a huge selection of rough rock, tumblers, grit, jewelry supplies etc. at good prices. If you buy using the following link, I make a small commission. https://fas.st/t/u7uaxb5V This is the cabbing machine I use: https://fas.st/t/vCjRymKC – THE ROCK SHED – I buy a lot of lapidary supplies and rough rock from The Rock Shed. I don't make money from your purchases there, but they have good prices and good service. This is where I buy my finer grits and polish. http://rockshed.com – AMAZON STOREFRONT – I also have an Amazon storefront. This is where you can find other products you may have seen in my videos. As an Amazon Influencer, I earn from qualifying purchases. It doesn't cost you extra. http://www.amazon.com/shop/michiganrocks
How fast can you cut a round brilliant? 🎵 Music by epidemicsound.com 00:00 Intro 00:52 Preforming 07:36 Inspecting the Preform 08:03 Dopping 11:42 Calibrating Round 14:09 Crown Cutting 26:00 Inspecting the Cut Crown #speed #faceting
Demo with William Holland instructor Chuck Bruce. He demonstrates Traditional Stone Inlay.
In this tutorial I discuss the process of using a cabbing machine to shape and polish a stone cabochon. I'm using a Diamond Pacific Genie machine, and throughout the video I talk about several techniques used to properly form a cabochon and walk you through step by step to show you my process. If you missed my first two Lapidary 101 videos check those out to see how I cut a slab from a large chunk of rock, then take that slab and trim it to create a cabochon preform. I have been using a chrysocolla, malachite and gem silica material, and in this video we come full circle from rough stone to polished cabochon ready to be set in jewelry. Cheers! Sean
How to make a high-quality cabochon with master lapidarist Keith Horst.
In this tutorial video I show in detail how to use a trim saw to cut cabochon preforms from a slab of stone. A cabochon is the final polished piece, and you have to cut your preform before using a cabbing machine to grind and polishing your stone to a brilliant finish. A crucial process for anyone who is interested in lapidary! Check out my previous video for a tutorial on cutting the slab, and stay tuned for the next one on how to polish and finish your cabochon.
This video is about how I built my homemade rock saw (lapidary saw). It actually ended up costing me around $200 because I was able to find the tile saw on Facebook marketplace and turn it into a lapidary machine. So far I have cut many many rocks and it is still working great! If you are interested in seeing more awesome rock projects from us (Natural Stones) you should subscribe to our channel. We upload at 6 pm every Thursday. Thanks for watching. - Ben Components used to make this Rock Saw: Rock Saw: https://amzn.to/3ik8b7m Soft Blade: https://amzn.to/35vqTFD Hard Blade: https://amzn.to/2DTm8dy Saw Blade Sharpener: https://amzn.to/32i1tZW Drill Press Vice: https://amzn.to/3jYh8DM Drill Bit to fit the Vice: https://amzn.to/3bPYTxl You will need to find 11/16" bolts and washers at your local hardware store
After using a tile saw to cut rocks and finding my blade to become blunt after a short period, i asked for advice on any tips the viewers may have. In this video I put the suggestions to the test and the results are awesome. I want to thank every person who helped me by sharing their knowledge and I am grateful so very much. thank you all! #rookierockhounding #thefinders #cuttingrocks
In this video I show you the basics for cutting a slice of rock with a slab saw. I'm using an old Highland Park 14" saw, and cutting a beautiful chunk of chrysocolla/malachite/gem silica. This is the first step of lapidary, and a necessary process you'll need to know in order to cut and polish your own cabochons for setting in jewelry. Follow along as I go through the basic knowledge needed to work the machine, along with tips I've picked up along the way to most effectively and accurately cut a slab of stone.
Instructor Larry Carby shows us the process of making a trio of cabochons.
Lapidary classes - https://lapidaryclasses.com/ CabKing machine: https://amzn.to/3rIEsii Trim Saw: https://amzn.to/3LSUkpm Thulite on Amazon: https://amzn.to/3tpWHcO T-Shirts: https://gotcharocks.myspreadshop.com/ If you would like to support this channel, please use my affiliate links above. A small portion of the funds go to this channel at no extra cost to you :) In this video shows how to do Lapidary work. I tell you about the Thulite stone I will be cutting. I show how to mark the stone using a trim saw to cut it into pieces. I dop the Thulite using dop wax and dop stick and grind the stone to the shape of a cabochon. I show how to use each grit wheel from 80 grit to 3000 grit and then the final polishing stage using crime oxide powder. I use Thulite in this example, a stone from Norway that cuts similarly to many jasper stones. All the best, Michael Here is a little info on the Thulite. Thulite (sometimes called rosaline) is a translucent, crystalline, or massive pink manganese-bearing variety of the mineral zoisite. Manganese substitutes for calcium in the structure with up to two percent Mn2+. Thulite is often mottled with white calcite and occurs as veins and fracture fillings, transecting many rock types. In mineralogical literature, thulite may sometimes refer to any pink zoisite. Clinothulite is the manganese-bearing variety of monoclinic clinozoisite.
Join me as I cut 28 rocks to reveal beautiful patterns and colours that were hidden inside these rocks for millions of years. For more videos on all things rock related from finding, cutting and polishing to a range of useful tips be sure to SUBSCRIBE to my YouTube channel - Prospector Paul. 0:00 Start 0:18 So Many Rocks to Cut 10:20 Thanks for Tuning in to Prospector Paul 10:43 Time to Cut Some Rocks 11:58 Changing the Rock Saw Blade 12:47 Revealing the Cut Rocks 17:26 The Verdict




















