If you would like to support this channel, please use my affiliate links above. A small portion of the funds go to this channel at no extra cost to you :)
In this video shows how to do Lapidary work. I tell you about the Thulite stone I will be cutting. I show how to mark the stone using a trim saw to cut it into pieces. I dop the Thulite using dop wax and dop stick and grind the stone to the shape of a cabochon. I show how to use each grit wheel from 80 grit to 3000 grit and then the final polishing stage using crime oxide powder. I use Thulite in this example, a stone from Norway that cuts similarly to many jasper stones. All the best, Michael
Here is a little info on the Thulite.
Thulite (sometimes called rosaline) is a translucent, crystalline, or massive pink manganese-bearing variety of the mineral zoisite. Manganese substitutes for calcium in the structure with up to two percent Mn2+. Thulite is often mottled with white calcite and occurs as veins and fracture fillings, transecting many rock types. In mineralogical literature, thulite may sometimes refer to any pink zoisite. Clinothulite is the manganese-bearing variety of monoclinic clinozoisite.
AI Generated·May contain errors
Hey everybody, welcome to Gotcha Rocks. Today we're going to be cutting up a piece of Tulite
that I brought back from Norway and Tulite is a translucent crystalline or massive pink
manganese bearing variety of the mineral zoocite. Wow that is a mouthful. Anyways it's a really
pretty stone with some pinks and whites and I'm going to show you how to cut it up and polish it
This is our piece of Tulite and this was a piece that I brought back from Norway
and this was given to me by Gerlinda who is in one of the the villages that we visited
and so we're going to cut this piece up and make a couple gifts for her, a couple cabochons. Now
you'll notice on this that there's the nice pink that's all around here and then you can see all
these little white spots and that's a calcite that's in there so the calcite is going to be
slightly softer than the pink portion of the zoocite that's been changed there as far as color
so we want to use the right wheels so that we don't basically wreck all the nice white patterning and
things like that. So we're going to walk through all the stages for cutting this particular type
of stone. Each stone is a little bit different so I thought this would be interesting for you
and it's a it's a wonderful stone once it's finished. Alright so here I want to just kind
of figure out where I want to cut this and what I'm thinking is we have this nice little flat spot
here we're going to cut this with our trim saw something like along these lines here so I'm
going to just kind of it might be in between but I want to just have this I'm just using a regular
pencil you can also use an aluminum pencil which is just a piece of aluminum wire and you scratch
it on there but pencil works great for me. So I'm just putting this on here so we can I have some
sort of guide where I want to cut and so that should give me a couple nice cavachons here and
here. So we're going to go back to the trim saw and cut it right now. Okay great we are at the trim
saw I'm using a high-tech diamond saw here and this is the brand here mine has adjustable speed
so I can go slow or fast. I usually have it about the about right at the sixth level here
especially when I'm cutting jaspers and things like that so that's that's it for that you know
you'll you'll feel it once you're cutting if it's not fast enough. So I'm just going to line this up
and we're going to feed it into this blade this is a six inch blade with a about a two and a half
inch cutting surface here and we're going to make sure that we have our guard down. I'm just using
regular water in this trim saw so I'm going to turn this on and I'm gently going to feed this
through like so and get a nice slice that we can then turn into a cavachon. I do sell these if
you're interested just get a hold of me and I'll make sure you get the best price. All right here
we go that's at about six on the speed so we're going to gently push this through I'm using my
pencil as my guideline here we go look at that what a beautiful piece isn't that nice that was
would be an outside piece this is the inside piece so we can really expect this to be really pretty
once we cut it up and turn it into the cab. All right let's cut another one I'm going to turn
the speed up just a little bit towards the end it was starting to grab a little bit so I'm going
to turn it up as high as it'll go here we go beautiful look at that okay I'm going to cut
this one also like this so I can get two calves out of that one okay here we go this will go a lot
faster once we have it kind of cut down to a manageable piece here all right I'm going to do
okay let's go over to the cab machine and I'll show you that and we'll start making this into
beautiful polished thumbs all right here we are we have a template if you need one of these I often
will just kind of guess but if you need to make something exact you can always use the template
this one has double so you just kind of put it in pinch it down and then I'm using a permanent
marker here like this and I'll just go around a few times I often I'll just use this strictly as
a guideline so when I pull this out I have something looks like that so I'm not going to
hold myself to that exact shape but this is how you would do it I just thought I would show you
that this here is our dot pot this is a dopping wax which is like a sealing wax that they used to
use for letters and things like that and this whole rim here heats up to I want to say it's
around 180 to 200 some degrees could be a little higher it is hot so I put the stones on the edge
here and I warm them up and then what I do is I take this is a dopping stick which is just a dowel rod
all right so I have the stone warmed up and we take our stick here I'm just going to put a little
bit right on the top here and I will say just just so you guys know I will often not even use
dop sticks but I figured I would show this to you some people are not a fan of having the tips of
fingers ground off it doesn't seem to bother me too much so we're going to heat this up a little
bit keep that going and if you need to see a full video on how to do this I do have one on my channel
so just check that out I'll put the the link up above so you can click on that if you need to see
it okay so I'm going to just let this go for a little bit these are two pieces here that we're
going to work with I'll I'll try to show you the best that I can on what this is going to turn out
to be I'm pretty sure it's going to be awesome all right to actually turn this into a cab we're going
to use my cab king machine here I do sell these on the the website if you're interested in getting
one they run about right around fourteen hundred dollars so and that's the about the lowest we can
move them out for so if you're interested in one of these I have videos on how to set these up and
all kinds of things but for that matter we are going to be working with the wheels that are 80
grit 220 280 and then we're going to come over here to a 600 grit wheel 1200 and then go to a
3000 then here on the side which is not attached yet we're going to put a polishing wheel so we're
going to start out with the 80 grit wheel and just like really frame this into its proper shape so I
showed you how to use a template and I'm going to show you what I normally do which is just kind of
go like this use your drawing skills right it doesn't have to be perfect just to give yourself
something to work with now normally you could go back to the trim saw and cut these pieces off
but we're just going to grind them off in this example okay here we go all right we're turning
our machine on and this particular machine has a water feed that's down below it doesn't
it's just a little pump it goes in a bucket of water and we're going to turn this on
and the water will start to come out so it's got this nice little handy light here there it is
so we want lots of water for this particular one okay so we want to keep the stone as cool
as possible as we're cutting that will also protect your wheels so here we go it's a little
noisy now I'm applying a decent amount of pressure but not so much that it's actually
going to slow down the wheel but you can see how fast that just went down right so I'll do it again
here pretty easy so far I'm going to turn my water up a little bit more there we go all right so
that's eating it up pretty fast so that's that's nice it's gonna be easy to cut but you can definitely
tell there's some calcite all right now we're gonna do this other corner all right so we're
getting a nice edge here that's what we want all the way around and you can see where it goes to
this other part it's kind of gnarly there so let's fix that and for the most part I'm usually trying
to put apply pressure and then roll it up into the wheel as opposed to going this way
so just keep that in mind I'm just trying to get rid of this little spot right here
so one thing you could do is if you wanted you could pop this off the dop stick and flip it around
and make this your cabochon top but for this I'm just going to keep going just as an example
all right I've smoothed that side out so now I just need to worry about the oval portion of this
and I'm just going to eyeball it a little bit that's looking pretty good
this end here is looking a little bit high compared to this end so I'm going to adjust that
okay I'm feeling pretty good about this so if I go all the way around the edge here
there is a slight angle going this way and that's great it's not a problem but it's nice and
consistent so we're going to move to the next wheel and actually start taking off pieces of
this top make a nice cab on top all right we're going to be switching over here to the 220 wheel
which is this one in the center and I'm going to make a mark here in the center of the stone I've
it off a little bit and then I want to make consecutive sort of ovals or circles depending
on what you're cutting and what we're going to do is we're going to take this edge down
and we're going to make a mark all the way around the stone now once you get the hang of this you
you won't have to draw on it like this but I'm just doing it so you can understand this
line here is going to match up with this line here so we're basically going to be cutting
away at sort of in the angle like so so we get more of a cab sort of shape
so that is the goal and then we're going to then dress down the top
all right so I've cut the edge down you can see that it's gone down I'm leaving about
three millimeters here at the bottom for right now from the where the edge starts to where the
bottom of the stone is so right now the top of this is just as flat as can be so our next step
now that we have this angle we're going to start rounding over the top until this
portion here meets the center and I'm going to do that by rolling it like this and so that's
the next stage I'll keep rolling it across the stone like so so here we go okay and that's where
I'm going to leave it right now and so now we're going to switch over to the 280 wheel
and that's where the the magic starts to happen where we actually start to really
even everything out right now there's a lot of little flat spots and things like that but this
next wheel will smooth everything out and start to really bring up the luster of this stone
here we go with the 280 wheel and for this one I'm going to be pulling it across
like this and that will really help smooth things out these 280 wheels have a little sponge behind
them whereas these are just diamond wheels so there's they're very hard there's no flex jump
where these will contour to the shape of the stone and that helps you actually like really bring out
the roundness and the luster of the stone so here we go
now when I'm doing this I'm rolling it all the way across the top that is the key
often people will miss this top portion and you'll get all the way to the 3000 wheel or the 1200 wheel
and you'll be like oh my gosh there's a big scratch in there that's because you didn't roll
it over it's 280 okay so make sure that as you're doing this you're rolling all the way over the
center I'm going to turn this up so we get a little more water going one other thing to do
is really look at the sides here make sure you don't have one side that's higher than the other
so you want to turn it this way turn it like this see this is maybe a little bit higher just keep
watching it's very fine tuning and you don't want to you know push this too hard into the
so just keep adjusting
all right guys before we get going I just want to thank everybody for watching this channel
and if you found this helpful please subscribe I'm going to be doing a lot more of these videos
and hit the like button I really appreciate it also if you want to support the channel
I've been designing some t-shirts for all you rockhounds out there so this is one that I'm
working on and if you look right up here you'll see that I have a store and all those proceeds
go to helping make more content on this as opposed to you donating some money and not
getting anything get yourself a t-shirt that's all I'm gonna say all right thanks a lot
now I'm fine tuning this edge here I'm starting to round it down just a little bit so it's not
quite so such a step up so I want to make this kind of a soft curve right here on this edge
that's why I'm running it along the edge here I'm applying the pressure as I'm going up
okay that's looking good I'm noticing that this side right here
kind of bubbles out a little bit too much that's just what I'm seeing so I want to adjust it bring
this side down just a little bit I'm feeling a little bit better about that fine tuning
feeling pretty good about that all right let's move over to the 600 at this point
everything's starting to feel pretty smooth I'm going to check every once in a while just drive
this off see if there are any major flat spots that I see and I don't see any right now that
I need to worry about okay I'm going to move to the next wheel all right this is the 600 wheel
and this is a little bit smoother so if you've ever had like you know just a
piece of sandpaper that's a 600 grit you can feel that it's relatively smooth and that's exactly
what it's going to do to this it's going to really start to bring out you know the the luster and the
shine of the stone especially all this like crystalline structure here all those pinks
and so we're going to turn this on we're still going to use a lot of water and we're going to
be rolling once again across the top and this will slowly remove you know a portion of the top
of the stone here and you're going to see a significant difference as we go finish up with
this one here we go now I'm rolling from the edge across the top and a little bit further
now one thing I like to do is kind of do a spin thing where I'm spinning it like this and I drag
it along this edge here and try to hit some of the top as well so just kind of watch it's a freestyle
move now when I'm doing that I'm doing it very lightly and I'm just trying to hit any of the
other little flat spots that might be on there that I didn't see by going a different direction
as opposed to this direction all the way around now I wanted to hit it this way
very light touch okay so that's looking pretty good what I'm looking for right now is any sort
of flat spots I see something right there so what I'm going to do is roll back over this
I'm going to look at it again I see something right there I don't know if you can see that
little spot it's a little grindy spot that's probably one from one of the previous wheels
all right here we are we're moving over to the 1200 grit wheel here and this one just
feels like paper but it's amazing what it does so you can see right now just how smooth that
is looking and that's just after the 600 so we're going to do the 1200 and I'll show it to you
all right so for this one I am I'm putting a lot more pressure on the stone as I
I didn't really do as much pressure on a lot of these other wheels but the 1200 I'm really able
to apply a lot of pressure and that kind of brings up the luster just a little bit more
and it also helps contour of the stone so that it's a nice oval shape on the side so I'm really
just working from the edges all the way up over the top so I'm going to just keep doing this
it's really starting to brighten up so I'm going to inspect this really well
dry it off and then if it looks good then I'm going to move over to the 3000 grit wheel and
we'll do the polish all right here we are we have finished up the 1200 we're going to move over to
the 3000 grit and you can tell that the stone just with the 1200 grit this is dried right now so but
you can see that it's getting this nice sheen on it so we're going to go to the 3000 and that's
going to bring it up to even a higher luster and then we will do our final polishing and then we
should be done with this and ready to ship it out
so
one thing I want to point out is that I'm using I keep turning up the water
so that I get a lot more water on this I just want it to have as little resistance as possible
and to make sure that it can remove that like final little layer thin layer around the top
to really bring up that shine so just to let you know I'm using a lot of water
okay so at this point yeah that looks pretty good so what we're going to do there we go
this is looking really good no it was wet dry it off of my shirt here there we go and you can see
that that has some pretty nice shine to it so our next step is going to be doing the polisher so
I'll show you that in a second and that will attach right here on the side all right so I've
made sure that the the wheels have stopped turning here and this is my polisher it's a felt wheel
there we go this is a felt wheel and what I'm using is cerium oxide which is this stuff right
here and it is kind of a pinkish compound and I'm going to attach this wheel here
finger tight and then I've already poured some of the compound into this cup and then what I do is
I always just have a spray bottle here and I kind of just do this and so the the consistency that
we're going for here is like sort of like a toothpaste kind of consistency and then I just
have this old sponge and I kind of go like this and dab some up like this so while the machine
is not running I kind of just go like this and they call this charging you're charging it with
the actual compound I kind of rub it in there and I will often give it a little spritz of water here
just to get a little moisture on there now when you fire this up it does have a tendency to
shoot liquid towards you so make sure you've got your you know protector here a little water shield
and kind of do that so what we're going to do is we're going to turn this on
you can see it shot a little bit off there we're going to put a little more water into our compound
mix that around a little bit there we go mixing it up okay so I've got a good bit on my sponge
just an old sponge like the kitchen sponge you can just go like this and charge the wheel just
a little bit more I always start from the bottom and kind of the center bottom and roll it across
so the the wheel should be charged this point and then I'm going to change positions here
and actually start polishing the wheel so I get a better angle for you to take a look at
before we get going here I just want to show you how I do the polishing and so the way that I do it
I have the wheel spinning here and it's going this direction I have the the motor off just to
show you but this is how I usually do it I usually start close to the center and then I roll out
so I'm moving across the pad as opposed to just staying in one spot which will leave
kind of a groove in your your felt wheel so you know you want to kind of work it this way
as you move out further from the center the the speed of the wheel is increasing I mean it's not
physically increasing but the rotations per minute are getting faster the faster you come out here so
when you're in here it's easy to control when you get out here it does have a tendency to want to
kind of grab that so that's where our spray bottle comes in handy and we'll just give it a little
spritz I like to do there we go a little spray so let's fire this up and then I will start polishing
that and then we will remove it from the dop stick now to get this center portion here right in here
I want to make sure that this is all getting polished often that will be a spot that people
miss and then they'll get done you'll see scratches so when we've been going through all these wheels
we've been making sure that we hit that center so just keep that in mind as you're going through
you want to make sure that you're removing all the scratches from the previous wheel
so we should have done that by now so I think we're doing good I don't see anything
but another technique is you can start here at the bottom and roll your way up as well if you're
trying to hit specific spots it's drying out a little bit so we're going to give it a little
more water I'm just doing gentle pressure on this and I'm rotating my dop stick like this as I go
okay I think we've got this pretty I think we have this pretty shiny so the next step here
I've kind of checked I've worked around the the sides here to make sure that I'm getting a polish
on that I'm going to rotate it I'm using light and shadows just to see if there's any dips or
anything else that I don't like it all looks good to me though so what we're going to do now is I'm
going to kind of wash off the polishing compound and then I'm just going to stick this in the
freezer for a little bit and hopefully theory is that this will pop off if not I'll show you
another way to remove it all right so I just pulled this out of the the freezer and I gave
it a little push with my thumb like this and so it snapped off which is what we wanted to have
happen unfortunately I got all this like green stuff on here so what I'll probably do is just
take a little knife and kind of chip away at this or I'll warm up the stone and remove that
I'll show you the knife that I would use hold on a sec I just have some of these knives around
and so what I do is just kind of go like this and normally I would do this over something so
I could collect the the wax but you can see it scrapes off pretty easy and if you can kind of
get in here and pop it off in larger chunks I'll do another one for you here's one there you go so
that's what I would do I'm not going to get crazy with that right now I'll do it later but I wanted
to show you this is the piece that we have so we'll send this off to Norway and hopefully she
likes it but yeah so that is kind of the deal I would like to say that you know the polishing
is the the biggest and most important thing but actually all the wheels are and
so just want to make sure that you do your due diligence as you work through the wheels
but I think this just turned out just great everybody thanks so much for watching if you
have any questions leave me a comment below please subscribe if you found this helpful
and if you want to support the channel buy one of those t-shirts and you get a little takeaway so
I really appreciate you guys and I'll see you next time I'm working on some
agates I think next so talk to you later bye