How To Cut Rocks On A Tile Saw • Viewer Suggested Tips & Tricks
After using a tile saw to cut rocks and finding my blade to become blunt after a short period, i asked for advice on any tips the viewers may have. In this video I put the suggestions to the test and the results are awesome.
I want to thank every person who helped me by sharing their knowledge and I am grateful so very much. thank you all!
#rookierockhounding #thefinders #cuttingrocks
AI Generated·May contain errors
Video Summary
AI GeneratedThe speaker demonstrates the process of cutting and analyzing various rock specimens, including chalcedony, rhyolite, and common opal. The video focuses on applying community-sourced tips to improve cutting efficiency and emphasizes the importance of safety and patience to reveal the hidden beauty within raw stones.
So, I got off early from work. What better way to spend the afternoon
than to cut some rocks and look at the finds that I found from last week.
Scarlet found this one. How cool is that?
This guy. I didn't give these guys a good scrub down.
But he's pretty.
The big blue. He's not actually blue chalcedony.
What that is, is probably like a residue left from the basalt stone that he was in.
There's probably some stuff going on in there.
One way you can tell, a good friend of mine suggests using a torch or a flashlight
to shine it under with the high lumens and it should help you better see
what's happening in there, if anything's happening in there.
I don't have a bright enough torch to try it today.
I'm going to leave this guy until I have access to a bigger saw.
This one. I'm going to give him a cut.
And I'm probably just going to make him a half, half, half cut.
We've got some rhyolite with chalcedony going through it.
I'm going to cut him because who knows what's going on inside.
There's some chalcedony going in there. Finishing out there and out there.
I hope no one thinks it's sacrilege just cutting these rocks.
What it is, is when I cut into them, it'll give me a better indicator and a better experience
with maybe knowing what to look for in the future.
I think it's safe to say I'm going to go along this way there.
Now this one. It just looks like a chunk of ugly something.
But as I'm learning, sometimes the ugly ones can be beautiful on the inside.
I'm not saying this one's ugly. It's mainly chalcedony with inclusions.
There's a bit on this tip of common opal.
I think I'm going to try and cut him just a window across here.
And maybe cut this guy. He's rhyolite with chalcedony as well.
Last time I did some cutting, I noticed my blade wasn't cutting as well.
I asked for any, any tips from anybody and I got tons.
So I'm going to put them into play today. I'll explain them as I go.
First off, I'm going to take this guy off.
The reason being is that I want to be able to cut from the back of the saw.
In order to do that.
So now that blade's exposed so I can take a rock and pull it this way as it's spinning that way.
Hopefully, meaning the water will spray that way and not towards me.
Another thing I want to talk about, very important, is safety.
This might look like overkill,
but a friend of mine kindly sent me a couple of news articles on silicosis.
It does affect people more that are working in the stone mason trade.
I don't want to take the risk.
There's a few ways to minimize exposure to the dust from the rocks.
So water, always use the water that not only cools the blade,
but it actually keeps the dust settled. It wets it.
Once it dries, that dust then can become agitated and loosened up and in the air.
It can go into your respiratory system.
Same with the dust on top of the saw table.
So that's why I'm wearing this.
You can make fun of me if you want to, but it kind of looks cool.
I feel like I'm about to fly a jet, like I'm in Top Gun or something.
You guys can call me Maverick if you want to.
Either way.
This saw has a reservoir under here.
What I've found though is when I turn it on,
it goes from max to min pretty quickly with all the water that's expelled from the blade.
Now there's different ways to supply water to your saw.
I'm turning my tap to just a little bit, kind of like that.
I'll turn it on, lock it into place,
and then set that in the reservoir to provide water to there constantly.
All of these tips, I'm not going to say any names.
I appreciate everyone and I'd love to give everyone credit for all their tips,
but the reason why I'm not is because I don't want anyone to pick on a tip
or anyone who suggested it because that's going to happen on YouTube.
Where are we up to?
The brick trick.
Getting a red brick and running it through the blade
is supposed to help clear the diamond pieces in there of metal.
Meant to do it a couple of times.
Another thing I wanted to talk about also with the continuous
diamond blade is it won't actually cut your finger.
Don't try it.
There's no point.
I'm trying it now to show you.
The reason why I'm saying that is because fear of the blade can keep people from
doing certain cuts where their fingers might need to get close to it.
Point out though, this is a continuous blade.
There is no gaps in the blade.
If you have gaps in the blade, I wouldn't even try that at all.
It's probably going to take your finger off,
but don't be afraid if you have a continuous blade.
Hey, that sounded like a motto or something.
All right, we've got our safety stuff on.
Now we can look at the rocks and feel confident that we're doing it somewhat properly.
Oh, when cutting the rock.
When cutting the rock, when you do it, don't put too much pressure on the stone.
You let the blade do the cutting.
All right, I think that's most of them.
Oh, have fun.
Get creative.
Those are good tips.
There we go.
Those are our contenders.
Might look kind of pretty.
What should we start with?
That was really different.
I was keeping the rock basically from bouncing off of the blade.
Not pulling it too hard.
It felt a lot smoother.
So I guess what I needed to do originally was just be patient.
Get another one done.
I'm not going to show you the cutting for all these.
Cool.
Oh, geez.
That works really well, the pulling of the stone gently.
There was a lot of control over the stone for pulling as well.
Funnest part though, we get to look at them now.
And I always like to run the blade real quick just to spin any water off of it.
That basically, you don't want to leave your blade sitting in water when you're not using it.
So that was another tip from someone else.
All these good tips.
He wants to look at the rocks.
Here they are.
Let's look at them.
This guy has a funny cut to it.
It was too thick.
So I had to go one way that way and then flip it and cut it that way.
Very pretty.
Let's see how beautiful that is.
That would be chalcedony mixed with common opal in there.
You could feel the difference too.
It was a little bit softer because of all the inclusions.
That just looked like a, I don't know, something you wouldn't really catch your eye.
But it's stunning.
Look at the details in there.
What I've done with this is that when I'd cut down that way and then back down this way,
the corner of the cut started to chip.
So I've used the saw blade to round that edge off a bit.
I'm planning on tumbling this one.
Really pretty.
A little light bit of color around the edges from oxidization.
It's got a little bug in there.
Cruisy cave.
Looks like teeth.
That's cool.
There's very light bend in there, but not enough to look right.
Let's just leave it at chalcedony.
Everything's pretty.
Onto the rhyolite mixes.
This is some pretty light rhyolite.
I haven't looked at these again, like usual.
Oh, it gets darker.
Oh, wow.
It looks brecciated, brecciated.
You can see how the minerals have filled the voids of the rhyolite.
It must have been sitting sort of like that.
You can see the horizontal line where the minerals were left.
Geez, I like that.
Pretty stern.
I've wet these because they're not finished.
I haven't been through a polishing process, but there's a lot of different ways to do it.
Ready?
Oh, whoa.
What?
Yeah, it's really pretty.
Yeah, look at the void.
Look at the void in there that the chalcedony's come in and filled.
That's stunning.
And I wasn't expecting it to be that full of chalcedony, but just beautiful.
Got that bit there that I'm going to need to if I'm going to polish this.
But when I do, there's saw marks on here.
And I was speaking to a close friend of mine as well.
He was saying that tile saws will tend to give more of those marks left by the blade,
as opposed to trim saws that are purpose made for lapidary uses.
That was, um, that's unexpected.
And that on the outside.
And I mean, look, even that chip there doesn't show that much chalcedony.
That's why I thought there'd just be a little bit in there.
That's a thunder egg.
I'm calling it.
And it's spectacular.
I didn't even film finding that rock when I did the hunt.
There you go.
More beautiful inside into these just amazing rocks.
Some of the knowledge that others have been so generous to share with me
through comments and emails, etc.
I've been so lucky.
And you all really do me a service by helping me out.
And hopefully, in turn, by showing this, I can help others out.
Thank you, everybody, so much.
Fun hounding, everyone.
Maybe sometime I'll be able to cut this guy.
Who knows?

