I'm super excited to share this addition to the shop. In this video I go over this trim saw from Hi-Tech, we make our first cuts on it and I share my thoughts on it.
Overall, it is a very welcomed addition to the shop.
The presenter introduces and tests the Hitec Diamonds 6-inch trim saw, a domestic American-made tool. The video covers the saw's assembly, blade options, and practical performance across various gemstones. The presenter concludes that the trim saw is significantly quieter, cleaner, and provides a better finish than a standard tile saw, making it ideal for indoor shop use.
You know that saying, just because you have an empty space doesn't mean you need to fill it.
Well, uh, I'm gonna have to disagree with that because I have an empty space and, well, I just
filled it. What you're looking at here is the Hitec Diamonds 6-inch trim saw. Uh, showed up
yesterday, so we're gonna be kind of going over it a little bit today, making our first cuts,
test it out, make sure everything works all, all good. You know, I've already done the assembly.
So it does come with some extra stuff, which is really nice. It does come with two blades. Um,
they say on it that they're intended for different, cutting different material, right? Uh,
like this one is for cutting garnet, turquoise, aqua, corundum, emerald, rubies. The red one
that I have on there right now, which is probably going to be, uh, the one that I use the most out
of them. They say it's for cutting glass, topaz, quartz, and fine agates. I do have another one
coming, the green blade, which, uh, that one's, they say it's for slabbing agates. Um, you know,
I guess that's really, has to do with, uh, the hardness of the rock. Um, it comes with a stylish
blue apron. Hopefully blue is your color. And, uh, we've got the blade guard in here. You can
see that is the reservoir for your water or oil. You can run oil or water. I plan on doing water.
Um, blade change out seems pretty simple on this. Just, uh, unscrew that and you're, you can change
your blades out, right? They do have a selection of different, different blades. The instructions
are pretty good. Um, I like high tech, you know, it's made in America, which is important to me.
It should be important to you, you know, domestic manufacturing and all that good stuff. So you can,
I'm going to run it with the, the splash guard. Uh, my main idea behind this is to have something
that I can run in the shop through the winter. Um, even though it's tempting to put the oil in
it, I kind of want, want to run it with the water. Uh, I do have the vise for it. So this is a vise
that I like. I like the design of this. Um, this wasn't made super clear on their website, but now
that I see it, it's a really nice feature. I like that you can just flip it out of the way, right?
You can do all of your hand cuts, the vise in, have your material clamped and slide it into the,
into the blade. Uh, there's no water in it right now, but just listen to how quiet it is.
That is so, so quiet. Now, if you were in a tile saw, you would know that, well,
you should have hearing protection on. A tile saw is incredibly loud. I have some tile saws. We'll
be doing a comparison between this saw and some tile saws in a future video. But for right now,
I think I should add some water to this. Uh, over here on the bench, I have some rocks that we're
going to be working on today and do our first cuts. So here is the material that I think would
be good to work with. I have some slab moss agate from Utah. We're going to be doing some trim work
on the sides, cut that rough off. I have this piece of agate that came from Southwest Washington.
I want to just polish up the face. I like keeping rocks mostly in their rough state,
kind of enjoy them and polish windows. So we're going to be using the vise. We're going to cut
that face off. I have this slab of serpentine and I'm going to be cutting out that circle.
I'm kind of in preparation for a cabochon. Gravel Bar Hopper, that guy right there,
sent me a bunch of agates and this is one of them. And I'm going to be cutting it and we can
examine some of the finishes that we're getting off this tile saw. I'm not really doing anything
with that, but I wanted to show you. So, you know, I have my big oil slab saw and, you know, you can
see my cut here, right? And always what happens when I'm cutting something bigger is it breaks
off. This is the piece that broke off and you get that little nub right there. So we're going to be
trimming that off. Now it's important to get these off because when you go to your flat lap or
whatever, that'll happen and you'll start to get an uneven plane. So in the past I've had to break
out the tile saw, which I'm doing outside because tile saws are loud and wet and, well, not very
accurate for this type of stuff. So we're going to be trying some of these different things and we'll
see how it goes. I think it's going to go pretty well and load it up. So you're going to fill it
up just until they say about an eighth. The blade is in there about an eighth, which that's about
an eighth, and that was maybe a gallon or so of water. I already did the adjusting of the blade.
You can adjust the center of it. You know, there's a lot of adjustments to this, which
is nice. I'm not super familiar with other trim saws, but let's turn it on and see if water flies.
Got a little bit. It's just on one. There's two, three. It's between the four and the five, which is
about the rpms that they call for. Getting a little bit of misting. Nothing too bad.
It's certainly... I might make a slightly bigger splash guard, but overall pretty dang good.
I guess let's try trimming this. So I just managed to trim off that rough. That worked
pretty well. It'll be interesting to see what the finish is off of this blade. Scraps. Throw this
off to the side. On to the next stuff. Try this out. Yeah, with that guard up, it certainly wants to
throw more water. Well, that worked out quite well for getting that little nub off. Let's test out this
vise. We have to do some fiddling with it to get it adjusted. It's not something I haven't used
it before. Got it all nice and shucked up here in the vise. Same thing with the oil saw that we've
talked about in the past. You don't want that blade deflecting. So let's give it a go. Let's look at
this here. Got a little bit of paint from the saw blade, but that's normal. A little end cut. And the same thing
happens, you know, got that little nubby bit. We'll chop that off. So this agate from Louisiana, I'm
gonna opt to freehand cut. I was thinking about using the vise, but it's kind of a weird shape,
and I want to make sure to get it just right. So we'll try free free cutting this. I'm gonna go
through that white fortification there and try to catch some of this banding, I think.
Lastly, we're going to be cutting out preform. I like that location of it. Let's see how this goes.
Broke off funny. So maybe it's not the best preform, but you can certainly take that to
a wheel at this point and get that round. Let's head over to the bench. I will say the finish
off of that blade is much nicer than the tile saw, and we'll be going over some of this stuff
in the future here, but it's a fun piece of moss agate. So I'm not the best at cutting out the
preforms, but that's close enough, right? Round enough to take it over to a wheel.
The cutting the little nub off worked really well. Flat now, no rocking, which is cool. That means I
can take this over to the flat lap and polish this up. This is a big piece of seam agate, by the way,
that we collected out in the graveyard point. So you see that came off the oil saw.
The agate, really nice. I'm looking forward to putting a high gloss polish on that piece.
Here's that little end cut of it. So cute. It's not a video unless I drop something,
throw that in the scrap bin. And then probably the best thing here,
that agate from Gravel Bar Hopper is just absolutely... let me come around here. It is
absolutely stunning. Absolutely an amazing agate. A little bit of paint there. Gorgeous.
I mean, it's nice on the outside, and I'm surprised by it. So I'll be looking
forward to polishing that up as well. My initial thoughts after doing some cutting on it is that it
is significantly better than my tile saw. It beats it in a lot of different ways. There's a couple of
things that I need to take into consideration though, and that is the water versus oil. Now,
as I film this, we're coming into October almost. Well, October's around the bend.
We're already having nights out here that are in the 40s. So consistent freezing weather is a very
real thing. Now, significantly cleaner than the tile saw. There's no water everywhere like you
would get with a tile saw, to the point where you shouldn't, you know, you're not running a
tile saw indoors. I seriously doubt that. If you do, you have a full enclosure of tarps, basically.
So it's very nice that I can run this with minimal, minimal splashing, minimal drips. However,
we have water still. So my decision is oil or water. I could run oil for
the winter and run water in the summer, which would be nice. On the floor there, I have maybe,
well here, I'll show you. Let me show you something real quick. See those little drops
right there on the floor? Doesn't look like much, but it's not going to evaporate in the winter time.
And the issue is it will turn to an ice spot that will, I don't know, it's just going to be there.
It's going to be there for a long time. The same thing with my bench top. There's a little bit of
moisture right here on the front. I do have some plastic. I'll probably put a plastic top on this,
I think, at least in this little vicinity, because this will be wet and when I flip it
to get it out of the way, there will be some, some drips. The splash guard, I don't, I don't know.
I mean, it just, it pops off. It's just kind of, you just stick it into little tabs. I might make
something just a little bit wider. If it was like another half inch or inch wider on each side,
that'd be perfect. I'll play around with that. Maybe this is the best way, but I'm very happy
with it. I do have a discount code if you're interested in stuff from Hitech. It's currently
Rockhounding and you get 10% off. None of the machines, but all the other accessories and stuff,
you get 10% off. They have all kinds of stuff. Go check them out. They're great, great folks over
there. Made in America. Anyways, I think that about wraps it up for this one. I appreciate
everybody that watches the channel. Thank you so much. Please hit the subscribe button if you
haven't already hit that subscribe button for more Rockhounding and Lapidary shop type videos.
So catch you on the next one, everybody. Have a good day.