In this video I show you the basics for cutting a slice of rock with a slab saw. I'm using an old Highland Park 14" saw, and cutting a beautiful chunk of chrysocolla/malachite/gem silica.
This is the first step of lapidary, and a necessary process you'll need to know in order to cut and polish your own cabochons for setting in jewelry. Follow along as I go through the basic knowledge needed to work the machine, along with tips I've picked up along the way to most effectively and accurately cut a slab of stone.
AI Generated·May contain errors
Video Summary
AI Generated
Sean provides an introductory guide to lapidary, the art of cutting and polishing stones for jewelry. He demonstrates the process of transforming a rough chunk of malachite and chrysocolla into a usable slab using a professional slab saw, emphasizing the importance of equipment setup, blade protection, and safety precautions when handling mineral dust.
Hey guys, what's up? Sean here. I wanted to do a video today. Lapidary 101. So lapidary is cutting
stones, cutting and polishing and taking stones from a big chunk all the way down to a polished
cab, cabochon that you can use in jewelry. So today I'm going to show you how to cut,
this is a big chunk of malachite and chrysocolla, maybe some gem silica in there that I want to
take a slice off. I'm using a big old saw and then I'll show you how to use a trim saw,
which is the smaller six inch blade that you can cut preforms that then will polish and eventually
use in jewelry. So let's get started. All right, so here's my setup. This is a 14 inch Highland
Park slab saw. They don't make them like this anymore. It's I think Industrial Revolution or
something. And this is a six inch trim saw. This is a diamond encrusted blade that will go in there.
I just haven't set it up yet. And this is a collection of some rough stones that I have cut
a lot of. These are a lot of the slabs that I've cut. So you see we can cut a nice smooth, even
stone to work with. And it's a good place to start. This is that saw opened up. Here's a big
14 inch blade. And then you have your vice here, which is where the stone will be held
to adjust it. This is going to push it either in or out to go closer or further away from the blade
if you have it already locked in and you want to just keep pushing it so you don't have to
reclamp it each time. This lever down here locks. So right now I can move this whole vice to set it.
Then this lever down here locks it so it's set. And then it has an automatic shutoff valve here,
not valve, but a little doohickey that you attach this chain to at your desired length. So if you
want the vice to go X amount, you pull the chain to that length, stick it on here, and then I'm
going to close this door as it's actually cutting. And it'll push it automatically. And then when it
gets to that length, it pulls the shut off because this is the on and off switch right here.
So it just switches that and kills it for you. It runs with mineral oil. This is the best I've
found. It's non-detergent motor oil, white mineral oil. I got a tractor supply. Okay,
so when you're starting a new cut, you want to make sure that you're even. So if I've already
started this and I'm putting it back on, I want to make sure that that is lined up really well
with the blade so I'm getting a smooth cut. So this looks pretty good. I mean, it's probably
not going to be exactly perfect. And see, sometimes you do that and you got to start
all over almost. But just kind of line it up and then this tightens it down here.
And then the other thing, so that's going to be pretty good. The other thing you got to do,
actually I'm going to keep adjusting that off camera, but the other thing you need to do is
balance out the vise. So I have a bunch of chunks of wood over here that if you only have a rock
and half the vise, you have to have the other half weighted too. So I've got some wedges
that I kind of keep in there and tighten just to kind of make sure the vise is properly balanced
and it's not going to be all just you get it. Okay, so it looks a little bit like a mess,
but I got clamped in here and actually had to put this guy on to make sure that the rock was
steady in the vise. But now it comes an important part where you want to set the rock up to touch
the blade. You want to be close enough to where it moves really slow. So you want to set it up
right next to the blade, just a couple millimeters away. But first, slowly test it to hit the blade
and see if the blade moves. If it does, like you see this one is, it's pushing it just a little bit
every time you hit it. So what I'm going to have to do there is start and let it run. You hear it
when it starts hitting the stone. I'll let it hit the stone for just a few seconds and then stop it
and retest it because I want to let it kind of build a groove in there before I start cutting
whole things. If I cut it and don't do that, the blade can be skewed the whole time and it can
really warp the blade or damage it. All right guys, we're locked and loaded. So I'm gonna close this,
hit go. All right, I just stopped it because I started hearing it hit the stone. I'm gonna open
it up, readjust it, and make sure that the blade hits it directly. But one thing I want to talk
about with this stone particularly, there are some that are dangerous to inhale. So something
like tiger's eye actually has asbestos in it. Criscola and malachite, a lot of those copper
minerals can be dangerous. So safety first guys. This is a annoying mask to put on, but once you
get it, clip the back. Voila. All right, so this just finished up and it looks like we got a good
slice off of that. This is some amazing material. Look at this. Criscola in there is the turquoise
or the teal green. Looks like some gem silica down there in the corner which is the super silicated
stuff. And then green is malachite. But a real nice thickness. You don't want to be too thin
because then it's hard to cab. Because with a cab, you want a domed top. So if it's real thin,
it's hard to evenly dome it. But this was the outside and this is the inside. What a view.