Hi Guys, In this tutorial I will show you how to set a drilled focal bead in a wire frame, create various weaves, set a gemstone in a bail and create a prong setting. I hope you like it! Leave a comment below!
We're an artist community (wire and metals) for everyone to share their ideas, post their art, tutorials/events & workshops or ask questions. We are a great buch of artists and have a lot of fun being creative together with challenges and fun projects to create every month.
To see what workshops I am currently running or to get full kits and or loose gemstones, frames for some of my tutorials, square/half round wire & more tutorials visit my web shop:
Materials: - 0.4 mm (26 ga) wire - 0.6 mm (22 ga) wire - 0.8 mm (20 ga) square wire
- 8 mm round CZ or gemstone - 12 mm gemstone bead - 10 mm oval or pear flat-back cab
- 2 mm beads - 2.5 mm beads - 4 mm beads - 5 mm beads
Tools: - Fine tipped flush cutters - Chain nose pliers - Round nose pliers - Flat nose pliers - Polishing materials
Hi guys, this is Nadia from ebonycrafts and in this tutorial
I want to show you how to create a pendant with a drilled focal beam.
If you haven't already, hit the subscribe button because I put new stuff on a regular basis.
I quite often make kits and PDF tutorials for the videos
I put up on here and I'll pop a link in the description below and I also have all sorts of gemstones,
square and half on wire, some beads and all sorts of other goodies on my website.
So check again over and see if there's anything you fancy.
Last but not least, come and join us in our wire wrappers and metalsmiths group on Facebook.
I'll also pop a link below. Right, let's get started.
0.30 centimeters, 0.8 and three meters of 0.1.
So we've got our base wires, we've got five of those and we've got our weaving wire.
And so what we need to do here is find the midpoint of our weaving wire and we'll leave about
one third of the wire to the left because we're going to put some weave in the middle.
So just going to attach the weaving wire to the first base wire, bring in the second base wire
and slide it in over the top, make sure they line up nicely. So you're going to go around
that base wire once, come in between wire one and two, pull that tight and then come over the top,
round both wires, bring in the third wire, go around that wire once, like so.
So I'm going to go around, make sure they're nice and flat, go around all three base wires,
bring in a fourth, line this up nicely, go around the fourth base wire once,
and around all four, and then lastly bring in a fifth base wire, like so, go around all five.
So on the way back, what we need to do is reverse what we've just done. So we need to make sure that
we come around wire five once, like so, and then we're going to go around four of the wires
all together, like so, separate out the wires here, and then we're going to go around wire three
in one loop, bring the weaving wire around three wires, and then next we're going to go
around wire number two, one full revolution like that, then go around two wires, wire one and two,
and then last we go to the base wire and we do about three wraps like that, and then what I
like to do is push these weaves together, it's a little bit messy at this stage, the first one
is always messy, so once you push it together a little bit it looks so much better,
so make sure you line them up, and then once we've done a few we're going to squish, technical term,
squish the weave down, that will flatten everything out, so we're going to do a few of those and then
we'll move on to the next step. I've got about seven of those, I'm just going to remove the
top two, just pull them out like that, just get a little bit, especially with square wire,
it's a little bit tricky to pull them out because there's so much grip on these,
it doesn't want to come out, and just kind of cut them in half, I always try and preserve the wire
so I can reuse it, so cut it out of place, that doesn't make it too short, and you can reuse it
at a later stage, should make it a bit easier to pull these out, so that leaves you, it's much
easier to manipulate like that, so what I'm going to do next is kind of shape this into
sort of a semi-circle, just take your time, square wire once it's woven can be a bit stubborn,
I find, just shape it, careful not to bend the prongs too much, just take your time,
kind of give it a nice sort of semi-circle appearance like that, right, so next taking a
bead and what we're going to do is we feed the wire through on opposing ends and that will kind
of cage the bead in place, so just make sure you get it all right way around, actually this is the
back because the weave at the backs looks slightly different to what it would look like at the front,
so just make sure that you have it the right way around, just make sure I'm zoomed in here and
then just pull it in place, I've got a bit of a space at the bottom here which is nice because
we can add some detail, so just pull that tight, bring this in, I think maybe we need to add,
oh no it's actually okay, you could actually add a couple of spaces on each side but I think we'll
actually be okay because we're going to use some of this wire to kind of hide the gap here,
so that's right, so at the moment that's what it looks like, right, so next just going to create
some two by fives, I'm going to leave the outer one away and all we're going to do is with the bead
that's attached, going to go twice around the bottom wires like that, one, two, like that
and then what we're going to do is just go around the bottom wire
and then we're going to do that three times, so one, two and then three,
if I find the right way to go, there we go, and then we repeat that, so basically all it is, it's
twice around the two wires, zoom in and then three times around the inner wire here and we
repeat this about four or five times, not really sure how much yet, we do this on both sides, so we
do this on this side and also on the other side, obviously leaving the outer wire away and that
kind of creates the sort of starting point for the top, all right, so I've done six on each side
and I've lined them up so that we've got the four wires here parallel, so what I'm going to do next
is going to bring these up as well because we're going to put these in the middle in preparation
to create the bell, so what I'm going to do is take the outer one and I'm going to
just create a small little loop here, center like that, line it up
like that and then just come around
the inside, I'm going to bring it back in the middle, it's going to become part of the
bell like that, I just want to kind of make sure that it
lines up again with the middle like that, I'm obviously going to do the same on the other side,
let's try and keep it as symmetrical as possible, that and do the same on the other side,
right, so I've lined it up, I've brought the wire off on this side which is okay,
we're just going to add it back in, so we're going to be using that wire to create
the bell, so I've lined them all up, you can see that I've brought the square wire around on each
side and I kind of lined up all of the wires parallel in the middle as much as possible
because that will help us to create the bell now, so I'm going to do, I'm going to attach this back
in, so what we're going to do is create a block weave, so I'm going to reattach this by wrapping
this round, so all I'm going to do is wrap around the first two wires, don't go too tight because
obviously you need to have space to come in the middle, come in between wire one and two,
go around wire two and three, go around wire three which is one of the detail wires,
so try not to go too far down, then we're going to go around wire three and four, go around
wire four like that, make sure I'm zoomed in, I'm going to go around wire four and five,
come in between wire four and five, and then go around wire five and six,
and then on the way back we'll just go around each wire once, and that will kind of tie the whole lot
together like that, and then once you get to the bottom, I'm going to repeat this one more time, but I'm
going to be first, let's just push these all up together, and I've got my very useful
bentonite pliers for that, so push these all in, you just want to make sure that everything is
as lined up as possible like that, and then we're just going to repeat this one more time, and then
that means that we have all the wires are lined up, and they are set into place, and we can then
start creating the detail here like that, so we're going to do this one more time, and then we're going
to be doing the bail, okay, so I've got this shaped up, so we're going to do next, is just shape this, we're
going to bend these two middle wires out the way for now, I'm going to be using those later to
create a stone setting, and then we're going to shape these into a bail,
and take your time with that, you really want to make sure that they are
everything symmetrical like that,
and don't make it too small, don't make it too big, I'll do a bit wider, and once you're happy with the
shape, I'm going to bend these up, and do this roughly on the, as well on the other side,
obviously make sure that's symmetrical like that, and then obviously also make sure they parallel
once the wires line up again, and that's what it looks like at the moment, I said obviously
you know arrange these nice and straight, and these ones we're going to ignore for now, we're
going to be using these four wires on each side to do the recessed bail, all right, so we're going
to start on this end, so I'm going to take either wire, whichever is the longest, you'll need about
a meter and a half, I'm not sure what that is in inches, I'll put that in the description, we're going
to start by wrapping once around the outer wire like that, and then we're going to wrap once around
the inner wire up top, we're going to ignore these ones obviously as I said,
like that, and then we're going to go around both wires once like that,
and push that down a little bit, and we're going to travel across,
and we're going to start the press, so we're going to go once around the inner wire,
once around the outer wire, push this in, and then we're going to go from the other side
around both wires, and wrap around once, we come across, wrap around the inner wire,
and then the outer wire like that, and then from the inside, oops, sorry about that,
from the inside we're going to wrap around both wires once, and then we travel back,
and then we start the process again, wrapping once around the inner wire,
wrapping once around the outer wire, and then from the inside we go around all of the wire,
then we travel across, and then repeat once around the inner wire, once around the outer wire,
and then from the inside like that, we travel across, and this kind of creates this recessed
sort of, I don't know if you can see that already, this kind of creates this recessed sort of
wire bezel, and we're going to carry on until we get a little bit further up, and then we're going
to be setting a stone. All right, so I've done a section, so that's what it looks like from the
back, and it looks like in the front, so we're going to place, little flat backs will work best
for this, you can use faster diamond cut gemstones, but obviously because of the backing, flat backs
work best, so make it as long, the wrapping, the weaving, as long as the cabochon is long,
and then we're just going to take the wires a little bit, work harder now, because I've
bent it backwards, so be careful, so we're just going to bend this wire over the gemstone,
and place it like that, and then just kind of create like a little cradle, you may need to
adjust it with a pair of pliers first, because obviously I bent it out of shape, so I just need to
fix it a little bit first, so that it goes around the gemstone, so just straighten it up a bit,
it'll be work harder, because I've bent it, there you go, just very gently, you try not to mark the
wire when you do that, you want to straighten it out as much as you can, there you go, same on the
other side, just straighten it up a bit, so then it'll fit over the stone, slide that in, now it
should be better, so just shape it with your fingers, like that, and get the initial shape right, that's
all right, you can adjust it just now, so just let me get the initial shape right, and then bend it
straight, and that will kind of keep the stone in place, you can also lift it up a little bit, and
sort of create a curvature, to go around the stone, you don't want it to be 100% straight, so
create a little curve, and the same on the other side, lift it up a bit, and then a little curve will help you
to fit the stone, so once you're happy with that, and kind of press it down, obviously make sure it's
nice and straight, a little bit skew, and then that's what it should look like at the moment,
okay, so I've shaped it, so you can see here, it's got a curved side here, so it fits the stone, so we'll
slide this back in, like that, and you can adjust it to an extent later, so as long as it kind of fits the
stone, that's what it looks like at the moment, so now we need to obviously tie this back in, so we're
going to do exactly the same weave, except we're going to make a stop in the middle, and capture
these two weaves, so we're going to come in from the inside, like that, yeah, come round,
and just capture the middle wire, just make sure that it's centered, like that, go around it once,
like that, oops, moving out of shot here, and we're going to do the same, we're going to move across,
we're going to capture the second wire that holds the stone, and make sure that these are nice and
close together, like that, come round, and then we're going to start the weave afresh, so just come round
the inner wire once, and just make sure that when you are attaching it, that this bit is nice and
centered, because obviously you want to make sure that everything's still symmetrical, and
nicely centered, so push the weave down, and then I'm just going to carry on as we did before,
like that, and then come round, and then on the way back, we're just going to go around
both of these wires, and then come back to the outs, to the inner wire, oops,
come back to the inner wire, I'm not sure what I've done here, there we go, and then just repeat
the process, so I can actually get around the wire, there we go, like that,
and then start afresh, so this just gives a little bit of a pattern, and obviously
as you're working, push it down, and then obviously restart again, go around both wires once,
around the middle wire, each of these, go around these once, and then as before,
just repeat the pattern, and that's that, and obviously just zigzag back and forth a couple of
times, and we could do this until we reach the middle, not really sure if I want to do that yet,
we might want to create a little bit of detail with these leftover wires, I'm not sure yet,
but at the moment this is what it looks like, the stone later on, even if it's a little bit
loose, will get wedged into place, you can adjust these wires by pushing on them, obviously gentle
so you don't mark them, but when you are shaping the bail later on, the pressure of the wire,
and the backing wire will push against the stone, and keep it in place nicely,
so it's that at the moment, okay, so I did decide to wrap the middle wires all the way to the top,
and you could actually leave them, and maybe create some swirls with the wires, but I thought
it looks quite nice like that, so I went a little bit over, carried on with the weave at the top,
and that's what it looks like from the back, and remember how I said earlier, just make sure that
you've got the weave, the correct side at the front, well here it is, the correct weave,
I've put it at the back, anyway, not much I can do about it now, still looks okay from the front,
but yeah, don't make the same mistake as me, and have all the pretty side of the weave at the back,
yeah, so anyway, all right, so the next step is to shape the bail, so the way I do it, you can
use a bail making pliers, or you can just use your fingers, I generally just use my hands,
just depends how you prefer to do it, doesn't really matter, so I normally bend it forward a
bit like that, and then I just shape it, and as I said earlier, the sort of shaping will help
the stone to be pressed against the outer wire, and if any, if it was loose before, it'll be okay
now, and you just kind of make sure that it's nice and round like that, and then before you
close it off, you need to decide what you're going to do with the wires, so you can either
bend them forward and bring them through the front, or sort of bring them around the side,
or maybe bring some through, and I think that's what we're going to do, so I'm going to bend
out some wires from the side here, and I'm going to bring through these middle wires,
so I'm just going to go in a bit, so I'm only going to bring in these middle wires here,
and that'll help me attach the bail to the actual frame, I'm going to bend this a bit more,
and then, so just make sure that's nicely rounded, maybe bend this forward a little bit more
like that, and then bring this through, like that, so far,
so far, so good, kind of use these legs to anchor, so far, so good, and you can see the stone
gets anchored, and you can adjust this at a later stage, so if there's a gap or anything like that,
you can gently push on the wires, and that's what it looks like at the moment from the back,
and the next step is to work away these wires, so you can just cut them off, or add some detail,
I'm not sure what we're going to do with that yet, but have a look at that just now, okay,
so I've tucked these wires away, and now we're left with these ones here, so what we're going to do
is take the innermost wire, and we're going to follow the direction of the first wire, like that,
and we're going to create a swirl, we're also going to follow the direction
of the first small swirl, which will then bring this wire inside, and then we can create
a small detail that will follow the shape of the first, just very slowly create a loop,
and then that wire can go behind,
create a little loop, I think what we need to do here is bring it down like that,
and then roll it in, you need to leave enough length so that you can create a swirl,
let's bend downwards like that, and then it's in, it's better off using a smaller tool,
you can kind of roll it in, and make it fit that frame like that,
so then the wire kind of sits at the back, and we've got this wire here,
I'm going to be arranging this, I might create a small little swirl there,
that's what it looks like at the moment, okay, so I've arranged these the way I want, and we've got
them at the back, so what I want to do is now bring them through to the front, so I fold them over,
like that, this one like that, now we've got them here, just make sure it doesn't
change the shape here, now we need to arrange these to our liking, that's what it looks like
at the moment, so now I'm going to get rid of these, so just make sure they're nice and secure
at the back, because obviously you want to make sure that these come off, squeeze, and I think
this one, bring in like that, a little bit of a swirl here, like that, and this one,
all around, just make sure obviously that you need space, you can only go until the middle,
because you obviously need to do the same on the other side, maybe tighten this up a little bit,
so it doesn't take up too much space,
like that, and then bring this around, you need to swirl,
bring this down a bit, a bit more, maybe a bit more,
bring this down as well, and then kind of arrange it
until you're happy with the shape, same goes for here obviously,
that's what it looks like at the moment, so obviously make it look nice and symmetrical,
then we're going to do the same on the other side, okay, so I've oxidized the pendant,
and I've polished it up, and the last step is to add the prong setting, I'll pop a link to the tutorial
to the setting in the description below, and all we're going to do with this is just place it
wherever you like actually really, I quite like it here, and then find, use these two legs
off the setting to kind of attach to the frame wherever you like, and then obviously
once you finish with that, trim off any excess wires of that, and then that's that,
it's attached all, and then while I was attaching the bead, I actually broke the wires going through,
so if that happens, you can just restring it, and I've used some of the 0.6 mil, the 22 gauge,
to make it a bit stronger, and should have thought in, you know, before doing this, that this is
quite a weak point, so when you're using the weaving wire to go through, this is not going to
be very strong, so I pushed too hard on it, so if this happens to you, you can just restring it
using some 0.6 mil, or even some 0.4 mil, and then just attach it anywhere on the pendant,
and that's that, so now all that's left to do is just trim off all these bits and bobs here that
are sticking out, so I'm just going to come in here, make sure obviously when you're cutting
these off, that you're doing it where, like this one for instance, is nicely inside the bail, so
that it doesn't stick, and it's really important when you're making pendants and rings and anything
that's touching the skin, that you try and trim off items or pieces of wire where they don't really
scratch you, or pull a thread on your clothing, so actually I decided after I finished that,
actually maybe I want to add some beads, you know me, I like my beads, so I just added a few
on a 0.6 mil wire, and kind of just play around with sort of different placements, that one
obviously needs another one on here, so you get the idea, obviously when you add your beads,
once you're done, you also find a place to attach them at the back somewhere, and just add you know
however many you want, and where you want them, and see if you like it or not, yeah that's that,
obviously as I said, just attach to the frame, and that's the whole pendant done, I really hope you
enjoyed this, as I said earlier, I've made a kit for this, so you can find this on my website or
my Etsy shop, alongside all sorts of other goodies, like copper beads, wire, gemstones,
and amongst other things, and if you feel like it, come and join our artist group on Facebook,
which is called Wire Wrappers and Metalsmiths Worldwide, we're a fun bunch, and get up to all
sorts of interesting things in the group, and also if you feel like following me on any of my social
media, I've got Facebook, Instagram, TikTok, obviously my YouTube channel, and I'll pop a
link again in the description below, all my handles, and all my platforms are or is in
Barleycraft, so just follow that, and find me on there, and that's it for me,
thank you so much for watching, hope to see you next time!