How to Sew Your Own 1830s Bodice

American Duchess
30 followers
On this episode of Sewing Is Hard with American Duchess, we sit down and discuss all things relating to the patterning, construction, sewing techniques, and how to fit a 1830s Bodice. A well-fitted bodice is crucial for perfecting this time period, and we want to help make sure that your historical costume is as perfect as it can be. :D
Want to learn more about 1830s fashion, accessories, etc? Make sure to check out our other #SewingIsHard videos!
Hello and welcome to another episode of Sewing is Hard with American Duchess.
I'm Lauren and I'm Abby and today we're going to talk about 1830s bodice construction.
So Abby and I did really different styles for our 1830s bodices. Both are accurate but both are
vastly different. So Abby what style did you do? I decided to make my life as easy as possible
by doing a back closing bodice. Now with that being said... As easy as possible. It's as easy
as possible when it comes to construction. It's not the easiest when it comes to putting the
thing on yourself. So I just looked at originals and from there I did a little bit of a mix of
draping on myself and on my mannequin and then also drafting the pattern on paper. I did use
of an 1830s bodice and period costume for stage and screen as kind of my base pattern shape to
be inspired by. But then I did also use Workwoman's Guide for more information because if you look at
Workwoman's Guide and you read Workwoman's Guide, which if you haven't figured out that's a very
important book for 1830s, they talk at length about the importance of grainline in bodice
construction. And so I used Workwoman's Guide and Jeanne Hunnisett and combined I ended up making
my bodice for myself. Now I did a front closing bodice, a a lap over surplice bodice, so like a
wrap bodice. And the benefit of that is I was able to get into it and fit it on myself. I could even
fit the darts on myself. But it did have its other challenges. For instance, I struggled a little bit
with the silhouette because it came up so far on my shoulders to create the V so that I didn't have
like corset out and all over the place. I didn't really benefit from the very wide off the shoulder
look that you got in yours, Abby. So I had to make sure that my shoulder seams came down far enough
on my shoulder and my sleeve started at exactly the right point. Otherwise, it just wasn't going
to look period accurate. Yeah. The benefit is you were able to get it on yourself, but you did
experience some challenges when it came to fitting the gown. I did, yes. And patterning the gown. You
had some mysteries and this is why we say the back closing gown is easier because there were no
mysteries. Well, there was like one small mystery, but you had some real puzzles to figure out.
I had some fit issues through the side seams specifically. So the original gown that we
studied for as a basis for these projects has these fake side back seams, these curved side
back seams. They're not seams. They're just applied pieces of piping. I thought, oh, that's
cool. And I love a shortcut. So I also did that, but because of my shape, what that did, and because
I did this front closing cross bodice thing with the way that that was on the fabric to get the
pattern on the fabric correct, what happened is I had a bias edge on one side seam piece on the
front and I had a bias edge on the back as well. And when I put those together, I had two bias
together and they stretched all over the place. So I had a really hard time fitting through
this area of my body. If I had to do it again, I would not do the false piping on the back. I would
do separate side back pieces and I would cut the side seam on the straight of grain. Absolutely.
Even though that kind of messes with the plaid, I would definitely do that because of the way that
it holds the fabric in place. Side pieces are addressed specifically in Workwoman's Guide.
I should have paid attention. You are experimenting. You're conducting a grand
experiment. I did the three pieces. So I did the front, the side, and the back. And
the angle of the side piece, what's on the bias and what's on the straight depends on your body
type. So when you're making your 1830s gown, even if you're looking at a paper pattern that someone
else did, take that side piece into consideration with your body type and reference what Workwoman's
Guide says about it. For a stout person, the selvedge way or the straight of grain should run
from the extreme point of the bottom of the back of the side piece and towards the middle of the
top. And for slider figures, the selvedge way or the straight of grain of the stripe should run
along or nearly along the front of the side piece. So if the straight is on the front or the straight
is in the back, that depends on your body. Another thing about the grain, and you sort of preface
this, the grain is important on every piece. It's very, very, very important on the shoulder seam.
Oh my gosh, guys. Oh my gosh, guys. Oh my gosh, guys. Oh my gosh, guys. Have you ever made an
off-the-shoulder bodice that just slips and buckles, especially here? You just can't keep
it up. And you think, how the heck did they make these? It's all in the grain line. One point of
the shoulder, so the front is on the straight, and then the back is on the bias. And this,
do not not do this. This makes a world of difference. My shoulders of my gown are completely
off. They sit right here on my arm. And they do not move. Now mine is a little higher up. My neckline
is kind of like here. And I have quite a long shoulder seam. It curves over the cap of the
shoulder here. So what I did is instead of cutting my straight grain edge, and it's like dead straight,
I bent my straight against the bias. So I maintain the integrity of the straight grain
while still creating a curved seam. Before you actually sew up the bodice, you need to make
piping. The easiest way to make your piping is to cut bias strips either one and a half or two
inches wide, and then take cotton knitting yarn and lay that in. Fold the biased pieces of fabric
over, and then stitch the yarn into place, either using very loose stitches on your sewing machine
like I did, or by hand using running stitches. Now to put piping on your bodice, what you do
is first on one piece, so on my back piece, I marked out where I wanted the piping to go on my
stitched seam area, laid the piping over top of that, basted it into place, and then I took my
second piece, my side piece, again marked the stitch point on the lining of the fabric so I
could see it when sewing, laid the pieces right side together, and had the piping wedged between,
and then I back stitched the seams together. You can also do this on the machine if you want to.
It's really up to you. I just decided to sew my bodice by hand because I felt like it gave me
more control, and you're going to do piped seams wherever you want them to be. So I did them on my
back seams, my side back seams, my side seams, my center front seam, and my shoulder seams. I didn't
do them on my center back. I did them on my side back and side seams to have that really nice,
clean, polished look. I also did them around my arms eyes as well, but we'll talk about that in
the next episode. Now you're also going to want to face the back of the bodice just like I did.
My original gown has this too. The way you do this is first you mark the half inch seam allowance
on the center back of your bodice, cut away the lining, fold the fashion fabric over, and baste
it down into place. Then you're going to cut a two inch wide strip of fabric that's long enough to go
down your center back of your gown. Mark the seam allowance points, fold those over, and press them
down. Then you're going to take that strip of fabric, lay it over top of the back of the gown,
just slightly below the folded edge so that way it doesn't peek over, and then hem stitch
very carefully the long sides down. You don't want your stitches to be visible for the outside,
so you're only going to catch the lining in this case. Nervous fitting. Oh god.
To make fitting my gown easier, I basted up the center back in the position I wanted it to be,
keeping the overlap in mind, and I fit the gown from the center front seam. Since my side seams,
center back, and shoulders fit me so well, I sorted all that out in the initial mock-ups
and patterning of my bodice. I didn't really worry about how those were fitting, I just wanted
to make sure that I had a nice, good, smooth fit at my center front. So that's just a series of
pinching, pinning, and adjusting of the center front seam. I also fitted my darts at this time
by pinching, folding, and pinning the darts over into place, trying to keep them as symmetrical as
possible. Okay, so what I'm going to do now is I'm going to go have my boyfriend cut the basting
center back off, so that way all of my pinning has been left intact, and then I can draw on the
inside where the lining is what I need to do and where the markings are. I probably will actually
just baste the darts into place because I'm pretty damn happy with how they're sitting.
Um, so, so yeah, um, let me get down here. Neckline is nice and flush, sitting and dropping off the
shoulders, there's no gaffing in the back, it's nice and smooth. A little bit of line matching
there, unintentional, um, but yeah, here we go, 1930s bodice. I didn't tie it up, but I did make
my arm holes way too small, so I can't wait already for those to get knocked out. I just
kind of clipped them in about a half inch, and that gave me the ease that I needed to get this
is tight. I might give myself a little bit more room. Sweet. All right, guys, almost there. Yeah!
For the lining and the seams, you can see that I worked the lining and fashion fabric as one layer,
and so I just backstitched the seams together, pressed them open, and then overcasted them to
secure them into place. Darts! Darts! One of the most fascinating things about this period and
original gown that Abby has is the way that the darts were done. In modern sewing, we do the darts
entirely on the inside, so you have just the very discrete seam on the outside. In the antique gown,
and what we both did on ours, is the darts are fit from the outside, so you put the bodice on,
and if you have a slightly different side, right side to left side, everyone's asymmetrical, you
can fit that specifically, and then you just pinch them up, fold them over, and you top stitch them
from the outside, so nice, small, tiny stitches, and then what's going to be left over is the
little bit of flippy flappy seam allowance on the inside, and all you do is just press that over,
and just hem stitch it to the lining. It'll lay nice and flat and smooth. You're going to have
really nice fitted darts, and it's really easy to do on yourself. Yep, I fit mine on myself.
I did too. In the mirror. And then I got stuck. So I had a crossover bodice, which means I could
get that fit specifically, but Abby, did you have any issues with this area in your bodice? Yes,
I think this whole thing is actually really interesting, because 1830s corsets have a large
busk that creates the divorce of the bosom, but when you look at 1830s gowns, you don't always
see that separation. You get kind of a mono, yeah, you get like a mono boob. I tried to pattern for
this when I did my mock-up. I tried to accommodate for this when I fit the gown on the silk and the
lining. I tried to accommodate for this, but damn it, the moment I put the piping in, I was getting
wrinkles right between my tatas. I would take it out, refit it, pin it, sew it, try it on,
still wrinkles. Take it out. I think I did this like three or four times, and when you get to
that point, I'm starting to worry about my fabric getting scarring and holes in it and stuff looking
really bad, and of course, it's at the very center front, right where my boobs are, so everyone's gonna
see it. It's getting really like worked up about this, so I decided with the advice and blessing
of the Gigo Girl Gang group that I could pad my bodice, and it was fine. Pad that ---- out. I padded
it, and it totally worked. It made my life so much easier. So here's where I added padding to my gown.
It's just some cotton batting that I've stitched into place, so it helps give the mono boob look
versus the wrinkly in the middle look. We know that because we have surviving dresses from like
the 1840s and 50s where they've got these like big old titty pads in there, and I've seen pads for
like underarms like around this, around here. It's there all the time, especially with off-the-shoulder
bodices, but padding the center front is also a thing that happens too. They didn't always put
the padding in the dress itself. Sometimes you'll see antique shifts or patterns that have like a
flap that goes over the corset to smooth that out, or they put a piece of fabric there, a piece of flannel
or something for the same purpose. Yeah, so if you have that issue, there are ways to fix it, and
padding is one of them. Once you have your bodice constructed, you need to attach it to your skirts.
There's a few ways you can do this, but the basic rundown is that you create a waistband between
your bodice and your petticoat, and it's just a straight piece of fabric that's usually about one
and a half to two inches wide that you'd whip or top stitch your skirt and your bodice to. That's how
I did mine. It's just a nice straightforward piece of fabric. My one mistake that I made, I did the
lining wrong. I should have left the linen out or done another lining to cover the raw edges in there,
but I can do that later. So I put my bodice on, and then I found basically not my true waist, it's a
little bit above the true waist. Yeah, because you have a lot of bulk coming up in the petticoat and
all of your underpittings, too. Yeah, I just kind of eyeballed it, looking at what was flattering for
my body and what worked for the correct silhouette, and I pinned the belt onto the bodice, and then I
top stitched from the outside or prick stitched from the outside the waistband to the bodice. For
my skirts, I just had folded those over, they were pleated, and I whipped those onto the waistband,
and I pressed everything flat, and it works like a dream. I did my waistband on my bodice in the
same way, but I did it over my skirt. So I already had my skirt on, I put my bodice on, closed it all up,
and then I applied the straight strip of fabric over the top, turned up the edges where it needed
to be so that everything would lay nicely, and I completely finished the inside and outside of the
waistband on my bodice. You put a belt on top of that, so even if we weren't wearing contrasting
color ribbon belt, I would have made, and you probably would have made, a self-fabric belt
again to go on top of it instead of not. You wouldn't leave it plain. Well, you need to have
that belt buckle. Yeah, you gotta show off that belt buckle. You gotta have some jewelry there,
right? You gotta do something. Belts were kind of a, they were a thing. It's like the 1950s,
they were a thing. They were part of a style, you wouldn't leave it off your dress, but the really
important thing is getting the fit right, and as Ivy says, a little bit shorter on the waist rather
than all the way fully down, because you don't want that to ruck up, especially with an off-the-shoulder
bodice, and it will ruck up if it's too long. So shorter is better, especially for the 1830s,
and that doll-like appearance. Closures, guys. How do you get these bodices closed? What did
you do for yours? I followed the original gown, so I used hooks and eyes on mine, and it worked
a treat. Taking inspiration from the original gown, I did hooks and eyes spaced about an inch apart
and stitched so there is a overlap over the back of the gown, so that way it's nice and closed,
and also the skirt opening has closed up as well. You can also see that the waist eyes are in a
slightly different location than the rest of the gown. It was, I mean, sewing hooks and eyes can
suck, let's be honest. It's tedious, but you do have the ability to adjust the fit in an eighth of an
inch, like itty-bitty bit. My skirt doesn't have any hooks and eyes. There's actually a whole one-inch
overlap, so that was how I closed the slit of my skirt and kept it from, like, gaping open,
all on my corded petticoat. I learned that lesson. But you, this is where a front-closing bodice is
really kind of genius. Yeah. You didn't have to deal with that. You were not at the mercy of me
to get you into your gown. I could get entirely dressed by myself, so I had this whole, like,
multi-system thing going on. Did you have ties? I did not have ties. I just had four or five sets
of hooks and bars to keep everything up and in place, and it worked fine, so I got it all on
there. I got the belt on. The belt helped hold things in place, too, and it was very easy to get it
on and get dressed. You could also use lacing, I think, but for the most part, I think the hooks
are faster. Yeah, it makes life easier.
All right, guys, that's it for the 1830s bodice. But wait, we haven't covered the most important
thing, which is the sleeves, and the reason we didn't talk about that this time is because they
are a whole other video in themselves. Yes. So tune in next time, too. Sewing is hard with American
Duchess. Thank you for watching this video. We hope it was helpful, and we'll see you next time. Bye.
Bye. Hey, everyone. Abby here from American Duchess. I just want to let you know, if you want to check
out more videos about 1830s dressmaking and sewing is hard, head on over to the playlist. We have the
link somewhere around me right now. And also, if you love what we do and you want to support
American Duchess, head on over to Patreon and become a patron. We have swag, patterns, live
casts, and private video conferences, all sorts of awesome things, even shoes. But if you love
what we do and want to be a part of our community, we would love to have you.
