Sewing 18th Century Stays from Simplicity 8162 Corset Pattern

American Duchess
30 followers
321 Video Views·Oct 22, 2022
Are you interested in sewing your own 18th century corset? Perhaps you have Simplicity 8162 and you're looking for a review, tips, tricks, and notes before you cut into your project. Here you will find help!
Lauren has completed my 18th century stays made from Simplicity 8162. She's made some changes but also kept some things the same, but before she shows each change one-by-one, Lauren answer some questions specifically about the fit and support of this pattern.
Hi guys, it's Lauren from American Duchess. I'm here to talk to you about my new stays.
These are the stays that are made from the new Simplicity 18th century patterns that I designed.
This is the first in my underpinnings and as you can see they came out really nice. I'm very,
very happy with these and I'm going to tell you a little bit about what I did the same,
what I did different, and some information that you might want to know when you are cutting and
making your own stays from this pattern. So first off, I wouldn't normally wear my stays this way
over the petticoat, but for the sake of modesty this is how I'm displaying them on the video
because I don't want to be flashing you guys. But typically I would wear my petticoat over my stays.
My stays are the second thing I put on over my shift, then the stays, and then all my petticoat
layers. Some questions you might have about your Simplicity pattern. First being, what size do you
cut? I cut a size 12. Now on the back of the pattern envelope, that is the size that is
indicated for my measurements. So I cut that size and as you can see I have a little bit of extra
in the back for lacing. And I haven't laced them super tight in the front, I have a little bit of
extra in the front. So these stays have what's called negative ease. They are smaller than your
body measurements, and if you cut your body measurements according to the back of the
pattern envelope, then you will have stays that fit, that have a gap in the back that you can
cinch them in tighter or, you know, let them out as needed. Are my stays supportive? Yes, these are
very supportive. The nice thing about this stays pattern is that it is front lacing as well as
back lacing. That means that you can adjust it however you need to adjust it. So I've left a
little bit open in the front here to support my bust a little bit more loosely, but if I wanted
to really like plump them up, I would lace that closed. I can tighten the waist a little bit, I can
tighten the straps down. I can also get into these stays by myself. They're not closed in front or
they're not closed in back, so they're infinitely adjustable and easy to dress all by my lonesome.
Can you make these stays closed in the front? Yes. Can you make them closed in the back? Yes.
All you have to do is just sew the front pieces together or sew the back pieces together and then
your lacing will be on either side. All of those are historically accurate. Front lacing, back
lacing, front and back lacing. How do they fit? So as you can see, my stays are very low in the front.
They come up higher in the back, but they're not way high in the back. They're very comfortable.
Now with this really low cut front, the reason that I patterned them this way is to support the
underside of the bosom and to lift the bosom, but in a comfortable way. The chemise obviously
covers the top of the bosom. The reason they're so low cut, besides being period accurate, is that
when you have a gown that comes down, you don't want your stays poking out and showing out of the
top of the gown. You want them to support the bust and lift it up to create a beautiful decolletage.
Do I have to bone the tabs? Yes, you should bone the tabs. The reason for this is that the tabs
splay out over the hips. So in the midsection here, when you cinch any kind of foundation
garment on, it's squishing down and it's squishing up. So that flesh has to go somewhere. If you were
to create just a hard line here, or you were not to carry the boning down into the tabs, it would
create a very tight, very uncomfortable waist seam that would cut into your body. Do I have to add
straps to the stays? No, you don't. You can just omit the straps. All you have to do is just not
add them on the back, cut the seam allowance off, and bind over the top of it. Should my stays close?
I personally like to have the ability to adjust in the front and the back, or at least one of
those areas. So I pattern these specifically with a gap in the back, or a gap in the front,
either way, so that you have some play to cinch in the waist a little bit, or to cinch in the bust.
Extant stays, we do have evidence that they closed. We have some engravings that show
stays that are closed in the back. But this is a realistic garment. It's a working garment. It's an
undergarment. Women would have let it out or taken it in as necessary. So no, your stays do not need
to close. And in fact, if you want to have the maximum adjustability, I recommend that they don't
close, that you have a gap at the back. What if you have a very full bust? Will these stays fit?
The simplicity pattern goes up to a size 22. On the back of the pattern envelope, that indicates
that that is a 44 inch bust. Now remember, these stays have negative ease, so you're going to be
a smaller measurement when you've got them laced on than you are normally. Now, with the front
lacing and the back lacing, again, they're infinitely adjustable. So you can let out this
front lacing as needed to support your bust. On the side, there's a little tab where the strap
laces on. That's to control the side of the bust. So we are pushing up, but we don't want it to fall
out. So we have a little bit of a scoop here that's going to help control the bosom. Things about my
stays that are the same as the pattern are the pattern pieces. So I've just cut the pattern
pieces as is, and I've used those for my outer layer, my inner lining, and my lining. Things that
are different from the stays pattern are the boning pattern I did. I also converted my front and back
lacing to spiral lacing instead of crisscross lacing. I've done all of the same directions
up until the point where I put the lining in. Instead of putting the lining and then the binding,
I've put the binding and then the lining. That's a historically accurate construction method.
I've also added a little bit of extra leather bits on here. I've put some leather over the
seams, and I've put a leather patch under the arm. The reason for that is to reinforce the seams or
to reinforce these certain areas. There's some things that I didn't do. For instance, I didn't
do hand-stitched eyelets because I wanted to get this video done. I wanted to get this
pair of stays done before Christmas so that I could show you and talk to you about them.
So if you have any more questions, feel free to leave them in the comments. You can also
contact me on Facebook or in my email info at AmericanDuchess.com.
