This video shows you How to build an Old-Style Algonquin Toboggan using Traditional Tools.
In this video, Peter constructs a traditional native Algonquin toboggan utilizing equipment and methods from the 1700s in order to get ready for going off by himself into the winter wilderness. He talks about how the toboggan is a crucial wintertime tool for moving heavy objects. Utilizing an ax, wedges, and froe, he splits the planks apart. Using a draw knife and crooked knife, he completes the planks and cross members on his shaving horse. Next, he steams them over an open fire in preparation for bending. The cross pieces are attached to the boards using snare wire. In the final step, he flips the toboggan over and waxes the bottom with some beeswax.
Key moments: 5:45 Split the log in half 5:48 The halves into quarters 5:50 The quarters into eights 6:01 try to draw it out a bit thinner using a froe 8:50 try to keep both sides parallel 12:30 start steaming the plank 16:01 got the toboggan boards steamed and bent to the shape we want 18:30 pull the wires right up tight 22:24 do the last steaming 25:23 wax the bottom
This video describes you How to build an Old-Style Algonquin Toboggan using Traditional Tools. If you like our videos please click the like button on the video and follow our channel as it helps us massively. If you want to learn more about Traditional Home Improvement, Home DIY, Home Restoration and Documentary History of Ancient Buildings? You are in the right place! Check out the link: https://www.ganjing.com/channel/1felgihou7l7KrdqcbjTMjewv1pe0c
We greatly appreciate the educational video-creation team, so please allow us to upload this video to this channel in order to share knowledge and spread good values to all. The original video's source is credited below. Thank you very much!
Cre: @TheWoodlandEscape | Youtube
So here we are almost at the winter solstice and most definitely my
favorite time of the year. One of my passions is to go winter trekking,
historic trekking, so using only 18th century accouterments. And two of the
ones that are essential for that are the snowshoe and the toboggan, both gifted to
us by the indigenous people on this continent, certainly predating European contact by a
long shot. So the one toboggan I have here that I built a few years ago is my solo trekking
one. And what it allows me to do is to carry an extra blanket. So I can carry in my burden
strap, I can carry two full four point blankets, but a third one's almost impossible, too bulky,
too heavy. So it allows me to carry a piece of canvas, an extra blanket, a few more accouterments
that I would not normally take if I was carrying it on my back. If conditions are right, it's
ideal. If the conditions are wet snow, fairly warm winter conditions, it can be quite a slog
and then you wish it was on your back. So I'm going to be building a larger one for a bigger
group of people. As I say, this one's pretty much one for solo trekking. You'll notice
it's quite narrow. The purpose of that is it will stay inside of the snowshoe tracks
so you don't get it tipping over and dumping your cargo. The one I'm going to build is
going to be about six to eight feet long, probably about eight feet long in the body
and just a tad wider and it would accommodate four people. Winter camping has a lot of risks
that summer camping certainly doesn't have. When you add only 18th century accoutrements,
you're increasing that risk. And when you go solo, you're really increasing it. So one has
to be extremely careful in everything you do. It has to be very methodical. In terms of daylight,
one's pretty restricted to about seven to eight hours. So if you're up, strike your camp, get
moving fairly early. If you're alone, one has to stop about one to two o'clock in the afternoon.
Any later than that, it's going to get dark on you and literally be blacker than the inside of
a cat. So you need to set up shelter. You need to cut boughs for bedding because you've got to get
your body off the ground or you're going to be very cold and you have to cut a lot of firewood.
And I found over the years that when you have enough firewood that you think will last the
night, double it. As I did have one experience a few years ago where in the middle of the night,
I ran out of firewood and it was a new moon. So it literally was dark. Having only one candle
that I use for my fire lighting and my fire lighting kit, it doesn't give me any light.
So I was out in, I don't know what time it was in the night, scrounging around trying to find
enough firewood to survive till morning. Anyway, with four people is ideal, two to four, because
when you come to a site that you're going to pitch your camp, one person starts a fire immediately,
gets the billy on for tea. One person starts to build a shelter and two people go off to gather
firewood. So it's a lot, a lot quicker. It gives you about an extra hour or so in the day that you
can track because you've got all that, that help, all those hands doing the work. Anyway, I'm going
to go off to the bush. I'm going to find a nice cedar, nice clear cedar, and we're going to do a
little video on how to construct a traditional native toboggan. So we're splitting out our
planks for the toboggan this morning. Again, we're going to use cedar, light, easy to work with.
There's a bit of a trick to it to find wood that's going to be relatively straight grain
as you can feel a bit off the bark at the bottom of the tree and give it a rip upwards.
If the bark follows straight in a relatively straight line, the inside grain of the wood will
be straight. It's really essential for canoe building. So when you're going to pull these
planks out by hand, you're basically following the grain structure. So you want it pretty straight.
So with rib bending in canoes, for example, it has to be almost perfectly straight.
This one's not quite as good and we really don't care that it'll be adequate for our toboggan.
So I split the log in half and then the halves into quarters, the quarters into eights. I split the
So essentially the rule of thumb is you half everything. So half the tree, half the quarter,
half the eight, and you carry on. So I'm just going to finish this one. Then we're going to
try to draw it out a bit thinner using our pro. I've almost got this one done.
So now we're going to take the pro and split that out in half again.
So
okay, so I got two planks done working on the third. I haven't quite decided whether it's
going to be four or five planks wide. Probably four. Again, I want to keep it pretty narrow
so it stays in the snowshoe tracks. So basically what I'm doing is making a long canoe rib here,
the same process. What I do is basically make one side flat first. How I do that is I put a
bevel on each side and then I have a reference point. And then basically I remove
all the wood in the middle until I've got a reasonably flat surface. And then I just eye
the edge. It doesn't have to be that accurate. And I want to try to keep both sides parallel.
It really doesn't matter how wide it is, whether it's two inches wide or three inches wide,
just keeping them parallel. So yeah, again, I'm losing my light. There's not enough hours in the
day. So I'm going to finish up this one. I'll have to call it a day. Go start my fire and cook up.
So flat on the bottom, it'll sit on the top of the planks for the toboggan.
Then I'm going to try to punch a hole through these for each of the boards, corresponding
boards below. I think that'll burn a hole. If that's not going to work, it's going to split
out my material. Now, typically they made the ties for toboggans were made from rawhide.
And I have made them out of rawhide. The only problem with it is if rawhide gets wet,
anybody that has a native drum knows when there's high humidity, the drum gets all wonky and
you have to dry it out. So the rawhide, it's just like wire when it's dry. But if it's wet
conditions like today, you can't decide whether there's snowing or raining, that rawhide will
loosen up. And so the canoe will get kind of wobbly, the canoe, sorry, the toboggan will
get kind of wobbly. So I'm going to use snare wire this time around, make a little more rigid
thing. It's something that they would have had. So I've got a fire going over here. I'm going to get
my big pot on and I'm going to start steaming the plant. You can see in the backdrop here,
I've got them all planed out here.
Okay, so we've got the toboggan boards steamed and bent to the shape we want. This is going to be
like sketches I've seen of the old Algonquin style toboggans. So we're going to leave this
secure for the night, just let her dry out, probably freeze up tonight. Anyway,
who would have thought that our log cabin in the process would become the perfect jig for this?
So tomorrow, yeah, we should be able to take this off, get our cross members on.
And yeah, got to braid a bit of hemp rope, which we'll use for the cargo straps on it. And we'll
be all done from tree to toboggan in about a day and a half. So we're putting in our last cross
piece in the toboggan. And as I mentioned earlier, we decided to use snare wire instead of sinew,
which we could have used, or I should say rawhide, just a whole lot less maintenance.
I decided to split out a piece of white ash here, a little bit tougher than the cedar
members I've been using. It's going to be under quite a bit of stress once I put the curl in it.
I'm trying to reproduce an old style Algonquin toboggan. And the sketches that I've seen don't
show as you think of a modern toboggan with that bend over complete curve in the front. They
basically had a slight pitch to the front just to allow it to clear the snow. And of course,
they were always dragged behind snowshoes. So the snowshoes essentially set the track for the
toboggan. So I'm going to finish this guy up here. And I've been using, I've mentioned before how I
like using old tools. Well, these aren't old, but they are certainly a really good reproduction
of a pair of pliers that a hunter would have carried in his shooting bag.
So they're hand forged. They're hot riveted. And yeah, they're, as I say,
they're pretty accurate reproduction. So basically we're going to get our wire up in here.
And before we pull the wires right up tight, we're going to put a slight groove on the bottom
of the toboggan for the wires to fit in. So we don't want drag.
And we don't want the snare wire to wear. So we're going to put a slight groove as I've done in all
the previous ones. Doesn't have to be very much. It just gets that wire down below the surface
that will be sliding on the snow. So I'll finish this guy up here.
So that recesses that wire. That'll make her slide a lot easier in the ground and last a
There, that is the last piece of wire. So the last step, and I've done it in all these other ones,
I'm going to drive over these little twists I've got so that my cargo doesn't get caught on it and
it ripped my shelter canvas or my wool blanket. So I'm just going to pound these guys down,
and we're going to do the last steaming, tie it up.
And the only thing I got to do to make this a working toboggan is
braid a bit more of this hemp cord for the pull line. And we're all set.
So
I've all but completed my Algonquin toboggan. I have to braid a little more hemp cord,
get that attached to the pull rope, and I've got to wax the bottom with some beeswax and it'll be
set to go for my winter trekking. We think of the toboggan today as a toy. In the 1718,
well into the early 1900s, it was an essential tool. Indigenous peoples would disperse in the
fall into smaller groups, quite often family groups, for their winter hunting grounds.
And they referred to those months sometimes, some years, as the hungry moons. And so when
they would deplete the large game which sustained them in the area that they were camped in,
they would have to follow the game. And they would use the toboggan as the tool to carry their gear
and set up temporary camps and to bring the meat back to their permanent winter camp once they'd
harvested it. Our European settlers were the same. There's a lot of first person accounts of
settlers going for months on end where their only sustenance came from what they could take from the
forest. So, and they used the toboggan as well. So I'm pretty excited to get out there and trek.
It's raining like heck today and you can hear it on the roof I'm sure. So I'm going to get this
flipped over. I'm going to get the bottom waxed and I'm going to hope this rain turns into snow
so I can actually use this.