In this video I discuss my experiences in creating successful molds for complex sculptures. Armature preparation goes a long way. Things like wing armatures and hat brims, when properly constructed ensure success for your mold maker. I’ve made a lot of molds and know first hand a good armature built correctly ultimately ensures a good reproduction. I’ve dealt with poorly made armatures that fall apart while being molded or the extreme opposite, the armature cannot be removed to make a mold properly. While cutting up a sculpture is a last resort, it should always be considered when a sculpture has many nooks, hollows and projections. As always, I’ve put a lot of information into these videos and you’ll get out of it what you put into it. SOCIAL MEDIA Follow me for more fun and see what goes on behind the scenes in my studio. I can also be found on: http://www.Instagram.com/jonburnsfineart/ http://www.Facebook.com/jonburnsfineart/ BOOKS - technical Edouard Lanteri – Modelling and Sculpting the Human Form https://amzn.to/2PxwftU Stephen Rogers Peck – Atlas of Human Anatomy for the Artist https://amzn.to/3swUwyS John H. Vanderpoel – The Human Figure https://amzn.to/2O7k46Q George B. Bridgman – Bridgman’s Life Drawing https://amzn.to/2O43XH6
BOOKS – self improvement Neville – The Power of Awareness (also includes Awakened Imagination) https://amzn.to/3lYdoEk Florence Scovel Shinn – The Writings of (includes biography) The Game of Life & How to Play It / Your Word is Your Wand / The Power of the Spoken Word / The Secret Door to Success https://amzn.to/3ssh9Ey
SCULPTING MATERIALS & SUPPLIES CraftWrap - Plaster Cloth Gauze Bandage for Scenery, Crafts, Mask Art, Models, Molds, Keepsake Belly Cast - Each Roll 4 inch x 15 feet (Single Roll) https://amzn.to/3cwRvJg 1 Oz. Fiberglass Chopped Strand Mat - 3 Yards X 50" Wide for Hand Layup, Vacuum Bagging or Molding Composites with Epoxy, Polyester or Vinyl Ester Resins https://amzn.to/3fjUq9V Carriage Bolts ¼” x 20 SS, U-Turn, INC. (50 count) https://amzn.to/3lZtayK Autobody Panel & Trim Removal Tools (for demolding/separating your mother mold) https://amzn.to/3w9LXML Steel Hex Bolt, Grade 5, Zinc Plated Finish, Hex Head, External Hex Drive, Meets ASME B18.2.1/SAE J429, 1-1/4" Length, Fully Threaded, 1/4"-20 UNC Threads, Imported (Pack of 100) https://amzn.to/3ctbs3x 60 Pack 1/4" Wing Nuts Zinc Plated Fasteners Parts 1/4"-20 Inches Butterfly Nut https://amzn.to/3u31V9r AES Industries 294-1 Replacement 2-1/2" x 1-5/8" Curved Surform Blade (6 Blades) https://amzn.to/39q8efg Stanley Hand Tools 21-115 7-1/4 in. Surform Shaver https://amzn.to/3svUMhB JB Weld 8277 Waterweld https://amzn.to/3cwSZTQ Chavant NSP Medium – Sulfur FREE, 2lb Professional Clay (Green) https://amzn.to/31tVqA8 Alja-Safe Life Casting Alginate 3lbs (by Smooth-On) https://amzn.to/3wfZiDl Smooth-On Mold Max 30 (Trial Kit, pink color) https://amzn.to/3fkM41Z Smooth-On Rebound 25 2lbs (Trial Kit, orange color) https://amzn.to/3m0MuvI Smooth-On THI-VEX https://amzn.to/3ruTeTL Krylon Acrylic Spray Crystal Clear 11oz. https://amzn.to/3cvMDUU Premium Baltic Birch Plywood 6mm (1/4”) 12” x 24” by Wood-Ever (I give Woodever two thumbs up for quality birch ply) https://amzn.to/39q9XS2 Titebond Original Wood Glue, 16 oz. https://amzn.to/3sx2E2o Dental Tools / Waxing Modelling Tools https://amzn.to/3sJ4ai9 Sandpaper Variety Pack 24pcs, 12 grits: 120 – 3,000 grit https://amzn.to/3djpa8F
Okie doke.
Okay, so, this video, I want to talk about two things really.
I want to discuss making thin pieces such as wings, hat brims, or things of that nature.
And, when we, and the second thing, is when we're dealing with sculptures that are complex like this.
And, I don't mean complex in the detail or sense like the drapery or whatnot.
I mean, um, that the arms are crossed.
We have an opening, an opening, an opening, opening, opening, opening.
And, then with the wings, um, I'm going to have a second wing come up here.
It will look more like this going upward.
Um, how to approach this, you know.
It's not easy as a mold maker to be handed a piece like this and to say,
uh, I need you to make a mold of this and we're not going to cut it apart.
That's ridiculous.
Um, I would refuse the job without being able to cut it up.
So, going into this knowing that this is going to be cut up.
I've made it so that it can be disassembled.
This part, I'm going to fill in more.
As I fill this in more, I'm going to, um, put drapery across here.
So, this will actually, I sculpt the form and then I can lay the drapery over it and decide what to do at that point.
Um, I mean, some of these, I mean look at this.
This gets so complicated.
But before I go any further, um, let's just touch down on the wing.
This paper plate, um, I've taken just simple scissors and I knew that this needed a support.
Let me just double back here.
So, here's the idea.
I drew a wing.
I looked at my reference material.
I decided on the wing that I thought would be best for what I wanted to do.
And I drew it on paper.
So, I drew it on paper and it was pretty long.
It looked pretty long.
I took a very hard piece of steel wire and I did just a general shape right here.
Um, it stops here and then I got armature wire.
If I wanted to, I could continue to do this hard steel wire here.
Um, I don't know.
You could probably use baling wire.
Something that's just going to be rigid.
This is armature wire.
It's much more soft.
You can see how easily I can bend that right there.
Now I'm going to have to straighten that out.
Get the desired shape.
I laid it on here and then just taped it down.
And then manipulated the wire to get the shape I want.
And that's part of your job as a sculptor is to figure out the shape that you want.
You know, it's no different than this.
Um, and because I could squeeze it in the middle and this would flex.
I took a cardboard plate and I cut a piece and then I cut a piece.
And I laid it on the curve, taped it down, flipped it over.
You can see right through here.
That paper plate.
Because it's rigid enough. It's like card stock.
And then I taped that down.
And that keeps it from flexing in easily.
You know, you have to give it some force.
So, um, the next step with this armature is to smear the clay on here.
And then I can begin to do my feather work or whatever I want to do.
I can kind of carve that into the surface.
But I dog-legged this.
And then that way when I put it in her scapula where I deemed appropriate.
It can go in at the same distance every time.
Now I just shoved it into the clay.
There's no female end in there for that wire to sit in.
It's up to you.
If you want to incorporate some brass tubing and do that, that's fine.
This armature is a telescoping armature originally.
And I've altered it.
I've pretty much made it so these arms are wire.
Like a twisted wire.
And then I've just plugged them into the body.
Once I had the rib cage and the basic form set up.
I just put these arms in there.
And the head the same way.
It's just, it goes in.
So her head and arms were easily removed in the beginning.
To get them the way that I wanted them.
And what this all means.
Okay, here's what it comes down to.
This is Alfred Gilbert.
Sir Alfred Gilbert to you.
Just kidding.
He's British.
He's deceased.
He has done a lot of works that you might see publicly in London.
And he's in private collections and so forth anyway.
You can see here how this piece is pretty complicated.
And what he's done is broken this figure down into pieces.
This makes a much more successful casting.
And this lends to the new sculpture genre.
The new sculpture genre being that these hands and face were made of other materials.
Like marble.
And then incorporated into a bronze casting.
It's a pretty cool style.
Check it out.
Early 1900s.
So these small pieces.
I don't know if you can see that well.
I'll try to zoom in here.
I'll zoom in the camera.
So these pieces here would all be set on like a tree or a strip.
So you have your wax bar.
Let's pretend this is a wax bar.
And all these little pieces would be set then with a sprue.
So this is your gate.
Your wax gate.
And all these little pieces are going to be set on here.
And then you put your sprue on here.
And you're going to do your venting.
You connect them all and then make vents.
So they come up when you're doing investment casting.
And then when you turn it right side up so that the sprue is up top.
The bronze flows down into this gate and then feeds into these little sprues.
And the vents are for getting the air off.
And then after you bust off all the investment.
You can cut all that stuff off and clean it up.
Well back in their days they didn't have welders.
So they had to come up with more sophisticated type of ways of dealing with this.
Like nowadays you can leave a pin on the back of this.
This is a bronze pin.
And leave a hole and shove that through and then weld it on the back.
Or do a double drill through the figure and weld the pin on the back.
And then retool the back of the leg for these armor plates and stuff like that.
But they've set up pins.
So being a sculptor that deals with casting methods.
You have to be somewhat of an engineer too.
You know marble you can operate more like a painter.
And just you know the finished product is the finished product.
You don't have to get into a lot of the science.
It's just part of your craft to cut.
But when you do castings you've got to really start getting into some kitchen science.
And so anyway these small pieces this is the key.
The base was one piece.
The legs are a piece and so on and so forth.
He got even down to the little crucifix on the staff or the sword here.
It is a sword he just didn't have it.
This is St. George detailed from the memorial to the Duke of Clarence.
This is cast aluminum and ivory if you want to look that up.
Circa 1896.
Alfred Gilbert he's got a lot of great pieces.
This is a great reference material anyway.
He's known mainly for Icarus here.
And the private collections the additions.
And did a lot of like public monuments.
There's one right in a, there you go.
So this one right here is one of his more famous ones.
This is the memorial to Anthony Ashley Cooper.
Seventh Earl of Shaftesbury.
Bronze and aluminum or aluminium as they say.
So you'll probably see that if you're ever over there.
Or if you live over there now.
So that took him three years to complete that piece.
Anyway moving along.
I would just like to say that's how I'm going to do this.
As a mold maker I'm going to remove the wings.
These will be cast separately.
Remember this is a labor of love.
I will separate with a wire or a blade.
I can get in here and just separate that to get a wire through there.
The neck is just on a post.
And let's see here.
There's a lot of folds.
So this can be problematic.
You don't want to cut across a bunch of folds like this.
Not necessarily if you don't have to.
I mean you can camouflage your seam line better when you do that.
However the cost is that there's a lot more clean up.
That you create a lot more.
Your circumference extends when you start dipping into hollows and such.
So once the head and the arms are off of that.
And this is plugged.
This will be a much more simple sculpture to cast.
Very easy.
I wouldn't be surprised if it's a two or a three part.
I mean it could easily be two for the torso and this lower half.
If I put my silicone on it properly.
That could come off in the mother mold.
Of course I have to make a mold for these, this and the wings.
But it's not complicated in the sense that we have to struggle with the mold.
To get it apart and all these pieces.
And in addition to the fact that we create opportunities for flawed castings.
When a sculpture is more complicated.
Adds to the bulk weight of the mold.
Which when molds are very big.
We have a lot of problems getting good castings.
Whether it's plaster or wax.
Simple molds are better.
It's just simple.
You think it's more work but shortcuts make fools of us all.
And that's going to be that.
So instead of going through the process and showing you.
I hope that for those of you that are at this stage.
That are looking for this.
Understand this to be a better method.
Maybe you're looking for an easier answer.
And maybe you want to do a little less.
Like leave the head on and only take the arms off.
Or leave the head on and this one arm.
And just take this arm off.
So it's a little easier to come apart instead of having these.
Because when you have a mold that you want to take off from the middle.
You have that arm in the way and so on and so on.
So that's that.
And there's a couple other things I'm going to have to figure out as I go.
This is not going to be the piece that she's resting on.
This is part of a larger clock project.
She's just sitting on a side dial.
That's incorporated into the whole of the clock here.
So I'll deal with that when I get there.
But right now this is where I'm at.
And in the next video I will show how I have this cut up.
So you'll see her finished.
And you'll see the pieces cut up.
And how I'm going to set those up for molding.
So stick around.
This is part one of two.
And with any luck it will stay two.
Not three.
Alright guys, thanks for coming along.
I hope this information helps you out.
And get Alfred Gilbert's book.
Sir Alfred Gilbert's book.
You can add him to your collection if you haven't seen him before.
He's a great figure sculptor.
From the time when I feel like figure sculpture of the modern era was at a zenith.
Before we started seeing the introduction of modern art.
Alright, thank you so much.
You guys please subscribe, like these videos.
And take a look at the playlist.
See if there's anything else that might tickle your fancy.
And I appreciate it.
You can share this on your social media posts with other people that you think might be interested.
I also appreciate that.
And please take a look in the description down below.
See if there's any tools, books, or equipment that might benefit you in your studio.
It will redirect you over to Amazon.
I am an affiliate marketer with Amazon.
So you will be redirected over there.
And if you do want to support my channel.
As a type of charity for love and country.
And love of John Burns Fine Art.
Go ahead and see me over at paypal.com.
Slash me slash John Burns Fine Art.
And you can make a donation there.
We do give 10% back to our local charities.
And sometimes we go above and beyond.
And give even more than that.
So you guys take care. Appreciate you.
Stay creative. Stay safe.