PPO3 is supported by Timber King sawmills.
For more information on my 1220 CRZ mill,
or one of many fully hydraulic options, go to TimberKing.com.
The probability of me spending a lot of money
on a really nice expensive name brand chainsaw is
getting smaller and smaller.
These inexpensive clone saws are, I mean they do the job quite well,
they really do. So in this video I'm going
to talk about all my chainsaws, then we're going
to get a little bit of uh time cutting with each
and every one of them um but this isn't this is
not some type of scientific experiment this is not an apples
to apples comparison this isn't a review
this is more or less i wouldn't even say it's
an experiment it's an experience i guess that's
right word it's an experience for me to uh kind
of give kind of get my own perspective
on a cost to performance ratio
because you can spend a lot of money on chainsaws and depending
on who you talk to they're justified right
so so there's that right off the bat i'm not a
professional tree trimmer tree cutter person i'm
not a professional uh firewood guy where i'm
running chainsaws constantly uh i think i'm kind
of sort of right below those so i have a big
wooded property that we are developing
and constantly cutting stuff i just got a wood
burning stove for my shop
so i'm going to be cutting a lot of firewood for our own personal
use i use a chainsaw very regularly especially over
the past two years i have my oldest saw up
here which i'll show you in a second Stihl MS250 i bought
that like 10 years ago and you know lived
in a lived in a suburb community
and only cut up a few logs that i'd get from a friend for
firewood for my smokers smoking meats
so the first 10 years or so or eight years or so of
my chainsaw experience was just kind
of minimal I guess you would call the average homeowner maybe
a little bit less than the average homeowner
and then my use on a chainsaw has completely
skyrocketed compared to that here on this property
and I have a variety of I got six
chainsaws up here to talk about
so from my perspective there's that I don't I'm not in
the bush every single day non-stop I can't justify
you know spending $1,300 on a chainsaw and then
spending money to have it ported I understand
when your when your when your chainsaw is an
extension of your hand saving a second
or two on every single cut that really adds up all the
creature comforts which make
which make that process really smooth and easy as easy as it
can be for you I understand spending a bunch
of money on that but I'm not that guy like I said
i'm probably a big step above the average homeowner
as far as my chainsaw use so let's talk
about these chainsaws let's go through these historically speaking
so i got this one as far
as the timeline goes this is a Stihl MS250 like
i said i got it like 10 years ago i learned what
not to do with a chainsaw with this chainsaw
so i've dogged this chainsaw it doesn't run right
right now there's very low power i burnt
this thing up probably in need of a rebuild uh but
i haven't had a need to go down the rabbit hole
of rebuilding this because of other stuff going on so
MS250 i have it not going to cut with it today
or in this video uh because well it's not in
cutting order for so to say
so when we bought our property this is the only chainsaw that i had and
was cutting some bigger pine with it
and that's when I realized that I've done
some damage to this saw and I'm gonna bite the bullet
and I'm gonna spend, for
me anyway, a considerable amount of money on a chainsaw.
Let's get an upgrade. From
there I bought this one.
This is the Husqvarna Rancher 460. It has a 24 inch
bar on it. It's a smooth ride.
It is a smooth cutting saw and when I stepped up
to this i was cutting some trees down
and i thought you know oh ah tim the tool man taylor
right this thing just compared
to that one it just it's just awesome it's just awesome compared
to that one very dependable saw has never failed
me uh shortly after getting this one i read a lot
of stuff about these pro yama saws
and saw some videos where people are saying that this thing
is like an incredible value for the money it's just it's just
a beast of a saw for what you get
it's a cheap chinese clone saw well chinese imports tariffs all
that other stuff i believe
when i got this the price was around 160
and i say around because i didn't buy this i actually
reached out to pro yama and i said i'll challenge you send me one
of your saws and let's see if it
causes me to park the husqvarna
and i will uh run it for the entire summer will it last the summer
and i was kind of arrogant by saying that will it last
the summer i'm thinking it's a cheap chinese
clone saw it's not going to last the summer spoiler alert
with all these on the table right
now that's my go-to saw it's balling it
is it's just really really good um it comes with a 20 inch
bar and a 24 inch bar uh the spare chains some other things like
a mixing can gloves uh a face
shield which is completely useless
and some hearing protection which is too small for my head
so there's some other extras there so like i said
when when i got this the price was around 160 if i
recall correctly don't quote me on that but as of today uh
that's going up to a little bit over
two hundred dollars i'll show the prices
and all that um in a spreadsheet real quick uh when i get
to the end so proyama sent me
this like i said i love it it's fantastic they also sent me their
pcs26 which is a 26 cc well 25 cc top handle chainsaw
and it's it's in a different class
of chainsaws it's a smaller engine it's
a top handle versus uh traditional style handles
chainsaws uh back handle that's what i'm trying to say
and this is for different tasks we'll say
i keep this near my sawmill
because it's it's reliable it starts every single time it's got
the power to do what i need to do near
the sawmill cutting off knots cutting off limbs
uh but i also use this sometimes
when i'm topping trees after i've taken them down so
i really like this saw uh it's it's 25 cc
so you can't expect this thing to you know
cut down monsters monster trees or or take crazy big bites
but for what it is it's super convenient
and it's dependable all three of these by the way are super dependable
so i had these two and i'm
like you know what the the Husqvarna just became
the backup saw it's good it's dependable but this
i don't i don't know what it
is this feels like it's just it just rips through stuff a lot better
Quick note on the exhaust on this Pro-Yama.
It's basically a muffler mod right out of the box.
There's nothing in this muffler.
Two big holes.
It screams.
It's crazy loud.
116 decibels is the tag on this thing.
It is crazy loud.
And for this little guy, this little guy is not that big of a saw.
It's 25cc, but the sticker says 99dB on it.
It's still pretty loud.
Again, the same situation with the muffler.
muffler is just for its size just the nothing
on the inside of one big hole you know uh it screams
so i think that does well i know muffler mods
do a lot to uh help chainsaws for example the
difference here uh the husqvarna that's
the factory muffler there's some stuff going on on
the inside and these holes aren't that big there's three instead
of two but the holes aren't that big
so it's quieter but you can tell that that holds it back just
a little bit all right from here
i have a bunch of um logs that are too big for my sawmill
so i want to do some alaskan chainsaw
milling and that's when i picked up i purchased
this farmac f07w this is a clone saw uh back up
a second proyama both the proyamas are clone saws uh
that's a clone off the zenith i think it's a g
5200 with uh different displacement displacement
on the on the engine i'll get into some weeds on
some of these in just a second
but this is a clone saw too it's a farmac f070w and it's cloned off of
the stihl uh i believe it's the 070 uh from stihl made
a long time ago it's a huge saw it's 105 cc's
that's a 42 inch bar right there i bought
this because i wanted to do some alaskan chainsaw
milling um for logs that are too big to go
on my sawmill i spent 500 actually i spent 450 on that
i remember that it was 450 it was on sale currently
that's a 500 saw it's 499 uh dependable
starts up all the time it's it's like uh i mean it's like
a freight train it just cuts i it doesn't
matter if you're cutting something that's 12 inches in diameter
or burying the whole bar it
feels like it cuts the same doesn't cut super fast you think 105 cc's
this is just gonna blow
right through it doesn't cut that fast
but it just cuts the chain on this is a 405 i think it's the
real wide chain on it so it's taking a big bite uh compared
to the other chainsaws um other chains
i have up here but it's just i mean it's like going
from a gas powered truck to a diesel truck
it just goes you know what i'm saying 119 decibels
this one is crazy loud uh so from there that's all
i had i'm pretty darn happy with the proyama
the fact that you can get the fact that i like this
proyama pcs 6.8 more than my husqvarna rancher 460
and you can buy two or three of these for the
same cost of that has changed my recommendation to my friends
and family locally if you want to
chainsaw uh several people in my local community ask me
for recommendations on chainsaws and i'm
telling you what that's the best performance uh performance
to cost ratio chainsaw that i've
experienced it's dependable like i said i really like
that that's my go-to chainsaw then here we
go VIVOR reached out to me
and said would you like to try one of our chainsaws and i said sure
so i looked up the chainsaw that they wanted to send me
and i'm thinking it's 118 dollars it's
gotta be a joke it's
no offense i'm just i'm just saying it's it's gotta be a crap chainsaw
yeah i'll take a look at it maybe maybe i can find a use for it uh
so they sent me this chainsaw
It is the VIVOR, I'm not familiar with the model number yet, CN62G.
So I did some digging on this,
and this chainsaw is a clone off of the same Zenith as this chainsaw.
So I thought, wait a minute now, 62cc versus 68cc,
and supposedly they're the same clone,
but this one has some displacement changes.
so uh this is uh from ProYama it's advertised as a 68 cc chainsaw
however i believe it's Empire
Workshop on youtube took it apart and measured it
and it's actually a 62 cc chainsaw the
manufacturer used a different method of measuring
that is not common with basically every other
chainsaw so they're advertising it as a 68
but as far as an apples to apples measurement compared
to all this other stuff it's a 62 cc chainsaw
so this is a 62 cc chainsaw cloned off of the zenith
and this is a 62 cc chainsaw cloned off
the zenith brand there's a little bit of confusion on what
what exact zenith saw it is so i've seen some sources say
that this is the uh g 5200 and i've
seen some sources say that this is the g5200 cloned
with a different different displacement
or it's the g6200 or maybe i have
those backwards regardless they're both cloned off of the same
brand if i'm not mistaken the zenith brand
is is a professional brand in japan i don't know all the
details on this thing
so i'm thinking wait a minute now if this vivor can compete with the
pro yama at basically half the cost
and is it dependable and is it is this the new
my new king of performance versus cost
because that's really all i care about i want something
that's dependable inexpensive
and gets the job done i don't need all the gizmos and gadgets and
the super fine um uh anti-vibe and and all this stuff
and also is this going to turn into an
recommendation for someone locally
that says hey I need I need a chainsaw that'll do the job but
you're only going to use a chainsaw twice a year well
if you can spend half the amount of money
and still get the job done all those creature comforts
or whatever may not be worth it to you
so yeah I'll take a look at it all of the cutting
that was done in this video was done
several days ago so I set out to cut up some logs
and right before I got started a local tree
service company that I work with who lets me get some
of their logs from trees that they cut down.
said they have three red oak logs that are ready to go
Perfect timing. I'll use these red oak
logs to cut up for this video.
So I got some red oak logs, set them to the side, and started cutting.
The
VIVOR
is
running
too
fat.
It
is.
It's
just
too
fat.
It's
not
revving
up
high
enough.
and i put a tack on it to adjust the carburetor
and it's it's just barely breaking 10,000 RPMs
and uh trying to adjust it uh with the the uh adjustment here
for the carburetor and uh i don't
have the right tool and it didn't come with the tool
so there's that it's not a standard you know
flathead like everything else in the world
is on these chainsaws as far as the carburetor adjustment
So I have to source the carburetor adjustment tool to,
I think, unlock the full potential here.
It's peppy, just like the Pro-Yama is,
and it just feels like there's something else.
So I'm going to pause all this until I can source
that and really give it a fair shake.
Before making any cuts with any of these saws,
I did take the time to sharpen every single one of the chains.
uh the big saw is sharpened with a 7/32 chainsaw file
and everything else was sharpened
with a 5/32 chainsaw file i
a couple years ago didn't really know how to sharpen a
chainsaw whatsoever so i went down the youtube rabbit hole buck
and billy ray smith is the guy
on youtube that i learned how to sharpen a chainsaw from uh
and he's currently at the time
of recording this video talking a little bit more about
a 5/32 chainsaw file instead of a
7/32. I sharpened with both of them,
but I'm on the Buck and Billy Ray wagons. So
I sharpened all of these smaller ones to 5/32.
And it seems like it's a little bit
faster to sharpen, but I can't really tell much
of a difference as far as it cutting,
you know, sharp cutting edges,
a sharp cutting edge, 730 seconds, 530 seconds.
So there's that. But when I was cutting with the Vevor,
it was obviously not running the best.
it was running way too uh way too rich needed
to lean it out a little bit more and increase the
RPMs in the cut it's obvious that that's what
that was going on so i go to adjust the carburetor and
it's a goofy screw on the carburetor adjustment it's
a pac-man uh carburetor pac-man style
carburetor screw rather than a simple flathead
which was it was very annoying because i don't
have a Pac-Man style adjustment.
I had to buy one off of Amazon real quick, so I
had to break the video.
And during that break, of course, the adjustment
didn't come in time.
I had to leave out of state to go to a wedding, so it's
like a full week and a half difference between
the first batch of cutting and
the second
batch
of cutting.
all
right
i
think
i'm
gonna
go
inside
and
blab
a
little
bit
more
about
this
saw
but
proof is in the pudding this is a lot of red oak
that i just cut up with a lot of gnarly knots
uh the first day i was out here i had a bunch of cookies
and i smashed them up with an axe and i
tried to split one of these uh with an axe
and there's just axe and a maul in them all and uh there's there's
just too many knots all through this and it's twisted together
and the grain is it's not
fantastic splitting wood with an axe we'll say
that so my strategy for the rest of this was hey
i'm running the chainsaw
and kind of kind of working it hard to see what it'll do so let's
cut them all into much much more narrow rounds
um you know instead of a typical 16 inch round
something like that now these are about 10 inches 8 to 10 inches
and uh that's just gonna be easier
to split with an axe or with a maul than something thicker
and i know that from past experience
splitting wood in high school from my mom's wood burning stove
so i've got a bunch of red oak cut
up ready to split uh and i made a bunch
of rip cuts you know like these are still pretty gnarly
some of these that had knots in them like all
right let's just make some rip cuts it's harder
on the chainsaw let's see what it let's see what it does
and of course it's just no pun intended
ripped right through it but uh three logs
no more it's all just a bunch of rounds so here we are
it's the day after cutting up the rest
of that uh red oak with the Vevor and let me run through
just a bunch of random thoughts
because i've got some thoughts on all of these saws this is like i
said not an apples to apples comparison this is just
a bunch of stuff about the saws that i have you
can use this information how you want all right
the anti-vibe winner by far is the husqvarna
rancher 460 really nice anti-vibe system it's
a smooth cut in your hands like it's a smooth
it's a smooth ride you're holding
on you're riding along the saw it's a smooth ride okay
the pro yama anti-vibe isn't the best you're cutting
a lot of hard stuff like i use this to
cut down a 32 inch diameter uh standing hickory tree
not topped at all it had a little bit of a
lean so it wasn't a dangerous type of a felling i used
this on that same property to cut up so
many so many hickory logs it has like i said a 20
and a 24 inch bar i had a 24 inch bar on it for
the longest time i recently just put the 20 inch back
on it uh i forget the reason why oh i wore
out the chain on the 24
and i had a chain for this so the i didn't need that extra length so
i switched back out of convenience anyway even
with a 24 inch bar you can rip through some really
dense hardwoods and uh the anti-vibe after
a long day of running um through some hardwoods
it you feel it you know what i'm saying you feel it
in your hands i'm not going to talk much about
the steel because it's been so long since i ran
it don't really remember it the anti-vibe on this
big boy 105 cc Farmac F07W is non-existent there
is no springs in this thing and the reason why i
only use this one time for alaskan chainsaw milling i did it once
and i said never again
this is the most brutal saw i've ever put in my hands
um after a long session with this i would
imagine you're gonna have to go to a neurologist
if you're it is it is insanely brutal on your
hands i have it i'm not gonna sell it
because you never get your money out of stuff like that so
maybe i might experiment with putting a smaller bar
on this and just having some fun cutting up
some rounds i don't know
but anti-vibe is there is none it's it's an experience that i would not
recommend but i like the saw
because you know well bigger right uh anti-vibe on this one doesn't
really matter it's just a small little top handle you're
not doing anything crazy with it but there
is you see the flex on that handle there there's
a little bit of anti-vibe um i don't have an
opinion on that to be honest with you i'm sitting
here thinking about it and anti-vibe has never
crossed my mind so apparently it's not that bad anti-vibe
on this one i would say is a little bit
better than the pro yama the the vivo one is uh
this thing's got a tremendous amount of flex in
this handle um and i feel like
when i was using this a couple times i keep my hands in line so
my back hand is obviously here
and my front hand i typically keep up into this top right corner over
here and on this saw i felt like i was steering
the cut just a little bit you know if you sharpen
your chain um maybe more
so on one side of the tooth than on the other direction tooth you can
you can it'll go a little bit on an angle
also if the bar is messed up it'll go a little bit
on an angle when you're making your cut not cut straight up
and down i felt like i was having that
a couple times and realized that it was my hand position
on this on this bar up here on there on
the grip and i moved my hand a little bit further over here
as i was making my cuts and then that
went away so it told me it wasn't the bar wasn't my chainsaw sharpening
or the chain sharpening
it was my hand placement up here
and i i wonder if that has anything to do with there's quite a
bit of flex in the springs here now i don't know
about modding chainsaw handles adding different
you know different hardness springs
or anything like that i'm not adding a full wrap handle all
the way you know i i don't know any of that stuff
so i'm not gonna say that that's what's causing it
it but it just feels like it you know what i'm
saying it just feels like there's a lot more flex
in this handle and uh that's what caused it
to do that or my hand placement with that flex i don't
know uh but i will say that that one anti-vibe
is a little bit better than this pro yama over here
both pro yamas and the husqvarna have a primer bulb
to uh to get it started and all three of
these you know you figure out what what the what
the chainsaw likes i can get all three of these
started in like three pulls something like
that if they start really really easy and i think that
has a lot to do with the primer bulb the steel i
do remember doesn't have a primer bulb and yeah
there's a sequence on the choke that you have
to go through to get it to start typical of steel
the vevor doesn't have a primer bulb at all you pull your choke
and yank on it a few times
and then it hits and then you put the choke in and then it runs
because it doesn't have a primer
bulb i feel like you have to pull the pull
the starting handle pull the cord um more so than
the pro yamas and the husqvarna
however it still does start every single time it's like six or
seven pulls when it's when the engine's cold six
or seven pulls and it starts and i've let this
thing sit for a little while go back out there
when it's cold and do the same process and it's
it's consistent it's consistently six or seven pulls
so i wouldn't say that that's hard to start
but it's not as effortless as with the primer bulbs
on all three of these being like consistently
three pulls to start so what is what's your value
that you assign to being a little bit more time
consuming a little bit more effort
to get it start started i don't know uh but but there's that
also my biggest gripe with this saw it is a cheap saw
and i'll talk about the prices in just a second
it's a cheap saw my biggest gripe and i wish if any
and if any chainsaw manufacturers out there
don't do this the the chainsaw chain tensioner is this screw right here
which is parallel
to the bar and the bar is in the way to make this a proper adjustment
and also as you're cutting all
kinds of gunk builds up in the head of this screw
so you got to dig all the crap out before you can
even make an adjustment and then the bar is in the way
when you're trying to make an adjustment
it is fiddly it is annoying to get
this chain tight it just it's just annoying if you're ever
going to build a chainsaw any manufacturer out there don't
do this this is old news put the chain
tensioning screw on the front right where
the bar nuts go it's just better it's just better don't
do that the pro yama has it where it should
be there's your chain tensioning screw right there
right where it needs to be not here right there nothing's
in the way of a screw i i just find that
to be incredibly annoying especially you know
after you've made quite a few cuts your bars
and chain's got a little heat in it
and you bump your knuckles on there and it's hot and
it's just fiddly it's just annoying there can't
be that much cost difference to move this screw
over to here they just can't
be that much difference especially especially on something
like this which is basically half the cost of the other clone saw
so that's my biggest knock on the
saw don't do that uh you see my hand right there you see
my knuckle how red it is i ripped off some
skin. That has nothing to do, not much to do with the saw,
but I do want to mention that when I
filed this chain um between
I think it was the middle of the second log, or maybe it was the
start of the third log.
When I filed the chain, my raker gauge broke on me actually. I filed it
too far and the raker gauge actually filed apart.
So then I kind of sort of eyeballed it with five
strokes i was averaging about five strokes getting
the rakers down to where they should be for the
chain uh and because of which some of these rakers are a little bit low
and when i was making my final
cuts you could tell in the video you probably could tell
in the video but it was it was it's
too hungry the chain is way too hungry as it
is right now still got the job done but when you put a
little bit of put a little bit of a lean
on the saw you know what i'm saying you're digging in a little
bit it was jumping around it was vibrating around
that's my fault not the chain's fault but or the
saw's fault but i figured i'd throw that out there
um the chain itself it's a factory chain i don't
want to put much emphasis on this you know it's like
the factory edge on a chisel you're going
to sharpen it later whatever um but this chain feels
the metal in this chain just feels incredibly
soft i'm not going to say that i would have gotten more life out
of say that chain on that same log
setup or that chain on that same log setup if they're better
or worse saw or chains but it just
felt like when i was sharpening
this that this chain felt really really soft so there's that i
don't put much emphasis on the factory chain you're going
to replace that as down the road anyway
um what else on this particular saw oh my knuckles right
so because of that anti-vibe i'm up here
holding on and as i was digging into the log
my knuckles this thing was vibrating so much that
it just ripped one of my knuckles open uh
that's kind of a sort of a me thing this does have a
kind of sensitive anti-kickback lockout
so on your hand guard here when you push them forward
they obviously lock the bar or lock the chain
so it's not going to spin well if you get kickback
this hand this the tip of the bar is typically going
to violently shoot up and you don't want
that chain to be spinning as it violently shoots up
at you you don't want it to hit your face or
your shoulder or any part of you period
with that chain spinning you really don't want to hit you
period anyway but what happens is the momentum of this bar going up
and this the the wiggle in this
this will actually be delayed in going up
so that delay of as this bar goes up this goes down just
slightly and it's pretty sensitive it locks it out during the kickback
so that's actually a safety
feature if you get a little bit of a kickback
and realize that your chain is bound up or something
it's not spinning well it automatically locked
the blade for you lock the chain for you and
that's actually a good feature chainsaw dogs
felling dogs felling spikes these are called
all kinds of things i call them chainsaw dogs they dig
into the wood as you're bucking a log
or whatever uh on the Beaver they're absolutely
horrible they're rounded over there's no out of
the box they're rounded over they're not sharp at all
but it is strong enough to where that doesn't
bend on the uh Farmact they're pretty violent
and they're massive although they're not sharp i don't
think they actually have to be in this situation
because they're just so massive uh on the Beaver
they're pretty sharp on the small top handle uh they're pretty sharp
and they work very well
i don't remember on the steel
but those look pretty sharp on the bigger Pro Yama they are
really nice these these dogs are really nice
on this right out of the box i've done nothing to
those and they grip very well
and of course on Husqvarna they grip very well as well uh but this
on the Vivor like i said they're rounded over they don't hardly grab
at all it's just going
to take a little bit of filing
or hit it with an angle grinder just to get that to a point
and the problem is solved but out of the box know
that that's just going to roll off the slip right
off the edge of the wood i didn't want to modify
this i'm going to but i didn't want to modify it
for that the the little experience
or experiment whatever uh cutting all that stuff because i
wanted to you know get an impression of how it
is out of the box there's a couple things that you
probably have to do to one of these things right
and that's one of them those are horrible
Vivor says this this is a 20 inch bar up against
the dog i don't know how they measure this
nonsense up against the dog over there
a little bit more than 18 inches 20 inch bar 18 and a
quarter effective cutting length all right pro
yama 20 inch bar up against the dog which is
actually a much larger dog by the way uh 17
and say seven eighths of an inch effective cutting
length the 24 inch bar for this saw
is the exact same way it's like two inches less all right husk
varna 24 inch bar let me extend this just
a little bit 24 inch bar up against the dog and we're at
about 23 on the radius if there was a tooth right there
in the middle of you around 23 inches
so not quite as exaggerated as them
but you know i don't i don't know what the the technical way
to measure this i guess if you take this dog off you're going
to get closer to it but who's going
to run the chainsaw without the dog on it
so i don't know don't uh don't put all your faith in
the numbers performance versus cost ratio
this isn't scientific at all either i'm just going to
tell you what they're what they cost what i paid for them all
and uh what i would do again and who
i would recommend in my local group uh what they buy
so the husqvarna rancher 460 i remember paying
660 dollars for that saw it was a painful purchase
because i didn't want to spend a lot of money on
a chainsaw but i did
and to me that's a lot of money um 660 dollars two years ago today
online 660 dollars the price hasn't changed all right
the proyama pcs68 again i reached out
the pro yama and said hey send me your saws thinking
that they weren't going to last the
summer and i would i would have
a you know some fun playing around with a new chainsaw
turned my opinion around on it completely
this is my favorite saw as it is right now uh this was i
think 160 something dollars two years ago now it is 215 dollars
but it comes with two bars and
three chains if i'm not mistaken two bars
and three chains and some other stuff uh the pro
Yama PCS to six the little top handle 26 CC chainsaw $129
if I had to go out
there and spend some money
on a top handle chainsaw for convenience I would
totally buy it it is it's convenient it's dependable
and for 25 CCS and you
know you it's not a you can't have 65 CC expectations
with this thing it does the
job quite well so I like this saw
and I keep using it very frequently the steel
Stihl MS250. I believe this is a 45cc saw.
I just remembered that off the top of my head.
Correct me if I'm wrong, or I'll correct myself on the screen.
45ccs, $430. I would say that this
one right here is the absolute worst performance versus cost
or performance to cost ratio of all
the saws that I have.
It's just a lot of money for a not decently large saw, considering the
options around it you know what i'm saying if i
was to go back in time and say hey jay you want
to spend 400 and 430 dollars on this one chainsaw
or buy two of these or buy like three or four of
them i would i would buy these like there's just it's just there's just
no way uh Stihl has a name
reputation out there and maybe there's a lot
of reasons why people would prefer this one over
Say chinese clone saws, but I can't find one.
I'm not going to buy another one. There's that
the Farmac F070W
It's a 105 cc saw that I got with a 42 inch bar
And right now online it's 499 so 500
But I do remember I bought it on sale
and it was like 450 something like that
If I was to go back in time knowing what I know now
And knowing how violent this saw is I probably wouldn't buy it
just because the anti-vibe on it just not there
and um i think this one is is silently supported
by all the neurologists out there
because it's just too violent in your hands anyway i have it
not going to get rid of it
but but that one costs five hundred dollars um so then that leaves the
Vevor CN62G it's going to take me a while
to remember that CN62G 62 cc saw 118 dollars yeah
there are a couple things that are annoying on it uh
the the log dogs you can sharpen those no big
deal uh the lack of a of a primer bulb uh just means it's going
to take twice as many pulls to
get it started but it does routinely start
so that's not the end of the world although
on although i do prefer the primer bulb
and then the thing that's just so incredibly annoying is
the way you tighten the chain on that i already talked about
that so if you're okay with with uh
a few minor annoyances and all you really value
is performance in the cut when you're in the wood
making making uh chips
then i don't think i can argue with that being the greatest performance
to cost ratio 118 for something
that performs pretty darn good is uh that's impressive if you
ask me now there's two different types of people
that locally i would consider you know asking me
for recommendations on chainsaws i'm not going to go out there
and tell you what to buy out there
in internet land because i don't know your scenario
and all that good stuff so i'm not going to make
any recommendations for any of you out there
but locally the if if one of my friends comes up to
mean he's like looking i'm looking
for some chainsaw advice i'm only going to use it a couple
times a year probably uh i just want something
that's going to do good for cutting this seasons
of firewood maybe a couple cords
of firewood i'm probably going to say hey check this one out
it's it's the least expensive
those minor annoyances aren't going to bother you as much
because you're not going to deal with them
as much uh probably i'm going to recommend my local
friends to get that one now if I've got someone else locally
for example my uncle who has
combined with him and his brothers 270 acres we just went through
the ice storm trees down all
over the place someone
who's going to use a chainsaw probably a little bit more than the
first guy but probably also a lot less than me I will
or I already have recommended he pick up
this saw and he did and if he was to ask me again even
with the experience of that one for him
i would probably recommend this one it's got
a really good i would say performance to cost
ratio a little bit less of the annoyances
but if you just want something that's just
going to do the job a couple times
a year you can't argue with the cost of that 118 dollars
it's just cheap all things considered uh i think personally Husqvarna
is overpriced for what it is
compared to the ProYama i think the steel
is massively overpriced for what it is i think that
this dude over here is probably priced appropriately
for what it is just because
of the capacity that this thing gives you
but you just have to deal with the annoyances if that
makes any sense and i do think that this ProYama top handle
is competitively priced for the
convenience that it offers
so there you go out there in internet land i don't care what you do
or do not buy i don't like people telling me how to spend my money
so i'm not going to tell you
which one of these saws you need to buy hopefully
this information uh gave you a little a little bit
of perspective on uh on the saws
that i have anyway uh you know that cheap saw you can't kind
of i cut up a ton of red oak that was much bigger than
the bar 24 inches i think is about average
and that's you know essentially like 18 inches effective cutting length
so it did the job and
and when the chain was sharp it was it
was balling it was pretty good so you buy whatever
whatever what ah tongue-tied you buy whatever you want to buy
but if you'd like to buy any one of
these i make videos for a living
and affiliate marketing is a thing we as we all know so i'll
have affiliate links down in the description
to all of these saws if you want to buy them cool
if you don't want to buy through any of that link
that's fine too i don't care if you do or don't
But I do get a commission on the sale for any one of these.
I'll have them linked down in the description.
And there's that.
Talk to you later.