One of the ways you can support our channel, is by checking out the items we promote on Amazon. If you purchase any of these items, or even follow the link, it pays us a commission. Even if you purchase other products after following the link it pays us a commission.
At the moment, we'd like to show you this beautiful Weller soldering iron that we use every day in our videos. The Weller adjustable temperature irons work better than cheaper ones because they attempt to keep the tip at a certain temperature, and are a higher wattage. This helps you get nice solder joints and makes it easy to do repairs.
These links below are to this product in various areas of the world, thanks for watching!
Check Out Our Patreon Account, for Unreleased Repair FAILS, Concise Repair Tips Not Possible In This Long Form Video, And 1 on 1 Repair Assistance with YOUR Project!
Our store is located at 139 Caldwell St., Rock Hill, SC 29730.
Ladies and gentlemen,
this is Joe's Classic Video Games back with another cool arcade game
repair video for you
this evening.
Check this baby out.
We've got Midway's
Gun Fight. I don't
know if I've ever seen one of these in person actually
and I've seen a lot of machines. We've
had just about all of them. First time we've had a gun fight.
So this is actually our buddy Mike's
machine. I know Mike pretty well
and he told me what was wrong with it so it should be a pretty
straightforward repair it's broke
it's like all the other ones
they're all broke we'll see if we
can figure out what's going on with it it's
a little bit older than what i usually mess with
i was kind of hoping ronnie was going to fix it to be honest with you
uh but we got a bunch of pinballs he's messing
with and mike's been real patient he's been
waiting for a while we've had this here for quite a while now
so i got to get it finished up i got
to figure out what's wrong with it
so i can text mike hey mike you got it finished up give me the
money and mike just shoots that money right
on over as soon as he reads the text message he's
sending me the money so we'll see what's going
on with it it kind of looks like this side has caught
on fire at some point looks like it's
been look almost looks like somebody took a torch to it
right here i don't know what's going on see
that's all bubbled up i mean that's the old licensing
sticker hell it obviously looks like it's
been burned to me just this top edge everything else
looks fine cabinet's not all that big either
um maybe five five and a half feet it's about the
size of that uh about the size of a pong you know pong
is a little bit smaller than the rest of the
games yeah it's got an old black
and white monitor in it i guess i'll take off the back door we'll
take off the back door and we'll look inside
of it what do you think about that here's the back
of the monitor yeah
this is a 23 inch black
and white hopefully all
that's good i don't want to
have to mess with that okay i'm not gonna mess
if it's working i'm not touching that monitor
it's old somebody somebody's ones like
this you better just leave alone okay so somebody has
updated the power supply at some point
so they must have they must have talked to that old hippie
that i talked to back in the day looks like
that's pretty well here's
the game board well i think that
may actually be considered the sound board on one
of these there's the main board now this is the
sound slash i don't know i really don't know i call
this the sound board it's got a wire out of
the harness i'm noticing though and i don't know
i don't know where that goes i can see if i can
figure that out yep let's
see what year this was see
if we can find out what year
this thing is
not preparing at all i don't
do any i don't really look anything up about them before i start the
video i literally just pull out my camera
and start recording and then i start saying random
nonsense and hope
for the best like comment and subscribe
the door's stuck well it's from the 70s
okay that's all i can tell you right now well i
guess i'm just gonna plug the thing in and hope
for the best people like it when i
do that so we'll see what happens all right i've got it plugged in
it's not on yet i haven't turned it on yet
but i noticed that they've got the power supply straight
wired that's okay for now all right
so when i turn this on hopefully the monitor
and the board will
come on i still
don't know about
that wire over
there oh crap
okay bro it stinks
well mike i think
i found the problem it
catches on fire when you
plug it in unplug it and i
guess we're gonna take
that board out of there and see what the heck burn
up really cooked it you're cooking it we cooked it
right all righty well let's get
the board out and uh we'll go
from there all right so i got the
board out of there i left the main board
in i'm just going to mess with this right now
and here's the burn up part both
of those burn up and they look to
be diodes to me maybe it's a cap
look like two diodes though and this board isn't
really labeled all that great so i don't even
know how i'm gonna figure out what kind
of diodes those are what that's supposed to be
usually it'll say you know D101 or C512
or something you know and it'd be labeled but
i guess they didn't really do that that much back
in the 70s i mean i see the rows they've got one
two three four five six
and then uh you know i just don't
know how i'm gonna determine what
that's supposed to be in the manual nothing
on the back somebody's changed that chip looks like
and all those resistors somebody's
been working over here looks
like mike told me he got it from
a guy he knows that it
was working you know a couple years ago
so it's not been i'm gonna have
to assume all that's good
because he claimed it was working
a couple years ago all righty well
i'm gonna take these diodes off
and try to clean up a little the board a little bit and see if i
can see anything well i took some Windex
and a magic eraser and i cleaned up that area the best
i could and those were definitely diodes yeah it's
telling you telling you to put the line that way
on that side on both sides those were definitely diodes
and it looks like whoever had it before
sent it to El Dorado Games to get repaired
and i was looking at this 6 12
of 2025 looks like
and mike's had it here
for a few months now so i mean i don't
know apparently it was working not
too long ago or El Dorado Games didn't tag it right
or something notice that cap there
and that little baby shortage i better check that
make sure that's not shorted you know these little
gumdrop caps are known for going bad known
for shorting we'll check that out and see and i need
to do some research to see if i can figure out what kind
of diode i should put in there i guess
i could probably put about anything in there
but i'll be back when i figure out something else on
Well, I decided I better check
this power supply before I go too much further.
Let's see what we got.
Negative 5 is a little low
I'm probably
okay there.
This is a Midway 8080 system setup
I don't really work on these very much.
I've worked on a few Space Invaders
And you're going to find the pin out
to get this wire in the right spot
The wire
is the negative
5 power wire.
You need to figure out where the negative 5 goes.
Well, I can't find anything wrong with the board.
i did change the two diodes i left them up off
the board a little bit thinking that if it catches
on fire again it won't damage the board seemed like
a good idea to me i figured out that the
negative five goes to pin five over here on this connector
so i'm just going to put it back in and
try it again and hope for the best maybe it was just
those diodes time maybe they were just worn
out maybe it was just their time to go
and that's all there's going to be wrong with it so we're
going to slide
this little
baby back
in try to do it
right edge
connector
back on so
a negative
five still in there like it's supposed
to be this little baby back
on and this is for the control
panel i don't think we even need this plugged
in look like it to me i'm not going to plug it in
probably just gonna catch on fire again anyway
we're gonna plug it back in please don't catch
on fire again please i want to make
that money plugged in we're going
to turn on the power switch
is everybody ready cross
your fingers i have
no idea what's going
on maybe something's shorted on
the main board we didn't mess
with that at all so back to the drawing
board well let's just unplug
this one unplug it
and see if everything seems
to be fine on the monitor how's
that power supply
doesn't really sound all that great i know it's
a newer power supply we've got neck glow on our
monitor see if the picture
collapses whenever we turn it off
oh yeah i can see raster on it
if you're gonna be able to see it
on video see that the monitor
was on the light comes on up here
response coming
from the monitor remember
we're not gonna we're trying
not to touch the monitor
all right i'm gonna take the board back out
when i take the main board out this time and see if we
got anything shorted on the main board i guess
well i'm back did you miss me i know it's been
a long time well little baby
here's shorted that could be our
whole problem it's shorted just
Believe me, it's shorted. I don't feel like doing
the whole chopstick thing and all that.
I should really get a better setup here.
It's shorted, okay? It's shorted everywhere.
That's supposed to be connected, but this is not.
It's shorted.
That's a tip 31C.
Rodney's probably got one of them laying around
here somewhere. I gotta find it, though.
I don't really know what I'm doing.
I'm just flying by the seat of my pants here, okay?
It's pretty obvious. It's pretty obvious
I don't know what the heck I'm doing,
but I'm gonna struggle through it.
See, we got all this stuff, and it's all labeled.
if you've been watching the channels see we got all
this stuff we've probably got that here
somewhere it's just a matter of finding it ronnie's
the one that organized it and he's not here and
you're probably thinking well why don't you just
text him yeah well he's asleep i don't want to
wake him up i'm just too nice i
care too much apparently tip 31c
the contact the leads on my
multimeter fell to the floor
and started touching each other that's right all right tip 31c does
anybody see a tip 31c let's get
tip anything there's a there's
a tip 36 i wonder if there's
a tip 31 in here there's a tip 127 oh that's too
big i need a tip 31c i'm getting older and my eyes
i think they're starting
to go to tip 102 tip
107 tip 31c there it
is i found it is there one
actually in here though tip 32
what is this tip 31c yeah buddy
that's what i need i'm gonna put
that baby in there and see if it's still shorted
if it's not shorted i'm gonna put the other diodes
back in and i'm gonna try it again yeah
that's what we're gonna do all right we got the game
board back in there got our tip 31c
in there we changed all four of those diodes try it again
hopefully it doesn't catch
on fire well we didn't make it
this long before
so i think that's
progress nothing is burning i see no flames
no smoke got a lot of noise in the speakers though
still nothing on the screen no video but we're
not catching on fire i think we've made a little
bit of progress anyway
so maybe we need to mess with the main
board some we haven't really touched
it yet let's try
that well i guess i might start reading
some stuff standardized test procedure for
midway processor boards
and board picture no we
have no picture go to case c
case c
no picture
this means
that there
is nothing
on the
screen
in other
words it
could be
also called broke this could happen for a number of reasons
and could usually be
rectified by following the instructions below.
Check for plus 5. If this is missing, and it is
certainly not the power supply,
the short or chip that is loading it has to be located by cutting
lines. Well, I know I've already got 5.
I've already checked that. I know. That hippie told
me I done checked 5, checked for 12.
In a number of cases,
the 12-volt gets loaded for some reason.
most commonly the 2.2 microfarad capacitors near
the rams h8 and h15 short out so cut them out
generally when a capacitor is the cause the line would
be floating at about one volt if cutting
these caps out does not help
then cut out pin one of the clock
driver ic it says clock driver ic
3245 at C5. If 12 volt is recovered, change C5.
In the case of gunfight using 8k ROMs,
the 12 volt line goes to pin 19 on all the ROMs.
Make sure that all the ROMs are out and it is not
here that it is loaded. If still the 12 volt is not recovered,
start cutting the lines near the RAM
and locate the bad ram short that is loading
it down well i checked for 12 but i was just
checking it at the edge connector you know
so i'm thinking i should probably check it pin 19
on one of the ROMs let me
do that all right
there's pin 19 so I'm
getting 12 so I guess I
gotta keep reading all right so all
the ROMs I have 12 volt so I'm gonna I'm gonna say that
this section is good because we weren't at one like they
were telling us. We were at 12. We were
over, you know, 12.5, 12.6.
So I'm going to act like all that's good. So now we're going to go
down here.
Check VRA and VRB at the resistors near A3 and A5.
They should be, they should both be
about five volts. If not,
follow the line and find the short or chip loading up. The following
table lists the pins to which VRA
and VRB go. So I guess I'm going
to check all these now. That's
gonna take me a little bit
so I'm not gonna film all that but basically I gotta find that chip at
A5 and then I gotta check pins 1 4 10
and 13 I gotta make sure I'm getting five volts to all
those pins apparently we'll
do that okay so I wrote down all
my stuff here so A5 those are the
pins I need to check A4 B5 yada yada yada yada
so A5 is the first one I need to check it on pins 1
four ten and fifteen and they said I'm supposed
to have five volts okay all right so A5 so this is
a there's nothing in one two three four five
a five, see the five, so pin one is right there
three point nine, pin four
three point nine five
six seven eight nine
ten ten ten three point
nine, all right let's check
a four, pin five, one two three four
five, three point nine, how about
b5, b5, pin four and one they said
one two three four, b5 pin four
and pin one if i don't drop the
board and fry everything and
catch it on fire again yeah b5
pin four one 3.9 3.9 okay so
supposed to be five on all those pins
is what they told me, i'm at 3.9 that's probably not good
enough i'm not even gonna bother checking on the other ones
because they're probably all at 3.9 too
all right i guess i gotta keep reading all right
so i ended up checking every one of these pins
all of these pins up here notice they're all
3.9 they're all supposed to be five and since
they're all 3.9 they must be all connected
together okay they're supposed to be five
so my theory is one of these chips is bringing down
the voltage something's wrong with one of
these chips all of these chips are good
because uh they've got five volts going to them one of
these is broke so i think you know i'm getting kind
of i'm getting kind of deep into it now
i don't usually go this far with something i put
a power supply in and i put a cap kit in there
you know i clean the chips and i'm on my way
but i'm diving in a little deeper i'm going into the
deep end so what i'm going to end up doing
is i'm going to start taking these chips out one at a
time and then i'm going to test it again
and if it's still 3.9 after i take out this chip well
that chip must have been good
so i'm gonna put that chip back in and then i'm going to take this
chip out and if that chip uh doesn't
do it i'm gonna put it back
in and go to this chip and i'm
actually going to try i think i'm going to take out
the chip that has the most legs going to the
five first because in my in my brain that's
the smartest way to do it see a5 it's got four pins
that are connected to the five volt
so i've got a better chance of one of those pins being broke
okay so i'm gonna try a5 and then i'm gonna try d5
and then i'm gonna try c7 and then on these
ones that have only one pin going to it i might i might try
to get do something cutesy and just
snip that little pin real close to the board where it's
not making good connection anymore it's not
making connection anymore and then if that don't fix it
then i could just put me a little dab of
solder back on it and get it to connect again
if that makes any sense okay so that's what i'm going
to do i'm going to try a5 first
and it's never it's not going to be the first chip i change
it's going to be whatever chip i decide to do last
and you can't play little tricks like well
i'm gonna do e7 first because that one would have
been last no that's not how it works if you do e7
first it's going to be a5 if you do a5 first it's going
to do it's going to be e7 whatever order you
decide to do it in it's going to be the last chip you change
that's just the way it always goes
but we'll see, i'll be back with you when i figure some stuff out
but yeah i guess i'm going to start
taking chips out, okay a5 here we go
so i took out a5
and that did nothing, it was still 3.9
so the next one i tried was d5
because it had four legs you know connected to uh five and now
that i've got d5 out, 5.2 yeah buddy we
still have may have a lot of other issues but
i mean at least we got the five volt back
so now i'm going to put those two chips back in
and i'm going to put the sound board
and outboard whatever you want to call it back on it
and we'll try it again, well i put the two chips
in, i put the in out board back in
got it all hooked up still
nothing on the screen
but listen to this, it sure
sounds like a gun
fight to me i've never played this game
but it sure sounded like a gun going off and if you coin
it up the coin counter is working
this one you pull the trigger i
don't think that sounds right
but that's probably
a different problem i don't
know maybe we got a monitor
problem too well i
didn't really want to mess with this monitor
but i mean it is 50 years old so i think i'm actually
going to just take it out change some of these caps
well i changed a few of the caps some of
these you don't have to change those are film caps
and they're pretty good but i was getting
ready to put it back
in and then i noticed
transistor here
the legs broke on it so i'm
gonna try to see if i can find another one
or i might be able to solder that one back together
if i can't we'll see all right so our video comes
in here it goes through here q1 q2 q3
and then q4 is the one that was messed up
so we're thinking that the video is not getting
all the way through. Q4 was broke.
So now I'm going to try to put it back in. Well, I had to
break down and rig up an LCD because I had
a couple of these motherboards and I couldn't get
nothing on this other tube.
And even without that daughter board plugged in, it's supposed to be
giving you some kind of gibberish like this.
So I think we've got a monitor problem and we still
have a board problem so i don't know we're
not really getting that far it's not smoking anymore
and i guess and we did get the voltage up
but it's still broke i'm gonna keep digging around
all right so i had a couple other
motherboards from other projects
and i found this one in the
back and ronnie had tagged it glitched ram okay
question mark looks like he's already swapped one
ram so what i did was i uh i put
in the space invaders test rom i put
in my daughter board
from the gunfight looks
like all the wrong all
the rams are good on this
board so now it's not
as easy as just putting the other roms on this board
and trying it there's some little jumper
wires you got to change because it's set up
for space invaders right now so now i got to change
those jumper wires back and set it up for a gunfight
then i'm gonna put the other four roms
back in and hopefully it'll work
but ronnie already had it marked as glitched so i don't know
that looks like it's probably from 10 years ago
though so we've got parts laying around we've had
some of these parts for 20 years just sitting around some
of them are tagged some of them aren't
so you know really i probably should have fixed
that other board the one that was in it but you
guys know this thing's 50 years old i'm
not exactly sure what i'm doing uh i don't want to
spend you know two weeks working on this thing i want
to get it fixed as fast as i can turn it over
move it on down the line work
on something else i mean could i fix that out of the board
probably would it took me forever yes i could have done
the same thing with the other board
move the jumper wires, put the test ROM in.
I'm sure it had some bad RAM, but looking at the
video from the other board, it had a ton of bad RAM.
And, you know, these traces are pretty
small on this board. I would have probably had to change a lot of,
if anybody has ever worked
on a Space Invaders board or one of these 8080 boards,
you know, sometimes you change the RAM
chip and then it tells you that the next RAM chip's bad.
Then you change that RAM chip and
It tells you that the other RAM chip's bad,
and it leads into a whole thing, okay?
So, I don't want to get into none of that.
I'm hoping I can just change the ROMs on this board,
change the jumpers, and we'll be ready to go.
Because we still got to mess with the monitor,
because we're still not getting video on the monitor for some reason.
So, this has been kind of a basket case.
It's a little bit more than what I usually get involved with, you know?
i'm usually into the Pac-Man's the Burger Times you know cap
the G07 change the power supply
clean the roms you know
and then i do the T-molding the blue T-molding you think we could
put some blue T-molding on this one I don't know Mike
that blue might make it pop I'm kidding
I'm kidding I'm not gonna put blue T-molding
on a 1976 arcade game Baby Pac-Man though it might
look nice with some blue
but anyway I'll be back with you I mean I'm hoping I can swap some ROMs
swap some jumpers
and we see gun
smoke on the
monitor that's
all I can tell you
this monitor
has given us fits so basically we're
not getting any signal on it if we turn the con and it's
flickering if we turn the contrast down
and the basically if you turn the brightness down you can
make it go black if you adjust
the contrast nothing really happened brightness has an effect
contrast has no effect so this thing is an XM702
and I am looking through it and checking the
voltages now on this printout here
the voltages aren't really all that readable but I went back
and wrote them in and your problem
is your video output you only get four volts and it's supposed
to be 3.0 volts and you can adjust this video bias
to your heart's content and this will not go up
but if you check the volts that the voltage
is coming into it like this is supposed to be 9.6
volts, but it's more like 5.2 volts.
This one is supposed to be 8.9 volts, but it's more like 4.3
volts. This chip, we're supposed to be getting 3 volts,
but we're getting 3.5 volts. And then
right here, we're supposed to have 2.9 volts
or something like that, and we've got 3.5 volts. So
all this is a little high, and I'm wondering if,
I think it's supposed to be 2.4. I'm wondering if
this chip is bad. This is an easy one to replace.
It's an A8H, and it doesn't need a heat sink or
anything and it can be replaced by a 2N3904.
So I'm going to swap that one and see if that gets
these voltages back more correct
and gets our video output higher. I think that's the whole
problem. Basically, I think the signal's coming
in and it's getting screwed up here. That's my
guess. So signal comes in here.
We've replaced the capacitors, of course, the electrolytic
capacitors. All the resistors test out all the way through it.
The electrolytics we have swapped,
we haven't changed the ceramics.
Usually you don't have problems with those. And our voltages
are correct here our voltages are correct here except
for this one this output is 5.2 so it
could be this is bad or it could be this is bad i think
so we're going to swap that if that doesn't
get it we're going to swap this if that doesn't get it
then we're going to swap the video output
the video output is a different beast
and it's got a heat sink on it so these are easier to replace
okay so we're going with a i'm checking
that and it's common for that to translate to an NPN
transistor and they're saying a 2N3904 would probably just
be a good common substitute. So
I've got one of those and I looked up the pin out to put it in.
And, uh, I noticed that this
transistor has been replaced
by someone in the past and, um,
they, um, I don't think they had
it right. I think they had, um, they had it like this.
They had the legs in the wrong spot. And
this is a 2N4400, which is also a, a, uh, NPN,
but I think they, I think they put the legs in
the wrong spot it's base collector emitter
and like uh you uh basically the pin out of it is
ebc uh if you're looking at the face of the transistor
and the pin out of this is ebc if
you're looking at the face of the transistor
but they did this leg twist thing um i think that
might have been the problem we might get lucky might
be an easy one joe hey joe we're gonna make
get money get the money mike get
the truck get the get the minivan get
the money all right so
we need to adjust the vertical hold contrast
and all that and i think we have fixed this monitor
very cool all right folks we'll play it
a little bit it's got a little something on the monitor
making it jump a little bit
but other than that we're pretty good um so you've seen me messing
with it enough that you know how it works basically you can move
your gun you can walk around
got you sucker and then this guy you can see
the shots down at the bottom too now the thing about
hiding behind your thing so you can shoot through yours
so this guy can shoot through hit oh i guess
that's not his i got me yeah i wonder how you
tell which one's yours maybe it has to do with
proximity no hmm i want
to see the little wagon oh
there was one on his side
maybe well why is the
left player got it harder then yeah okay so he's
got some he can hide behind now um and then at the
top it's telling us how many shots yeah there's
the i don't is that giving me points or something
what's that doing i guess it's not doing anything
it's just blocking got you sucker and you can of
course shoot at an angle now you might notice
this guy's moving down on his own he can still move i
don't know why it does that we ran out of time um so yeah
so that's the thing and i can't control
him right now because it's just
an ad thing hey partner you have credit push button so the monitor
is moving around a little bit so we still got
to mess with that a little bit other than that
seems like it's working good what a cool game now
if you heard that noise in the background
that's the fan on this one this is our old tornado baseball
that we did a whole series on
so if you're still interested in these kind
of board sets i'll put up the uh the playlist here
at the end of when we fix that tornado baseball
so you can check it out. Leave your comments below,
let us know what you think, and we will see you
on the next video. Hope you enjoyed it.