WITHOUT PRODUCT REVIEWS, SPONSORS, DONATIONS AND STICKER SALES, I’d have to go back to work and not do ANY videos, because you can’t live without any income.
Henry from Emotion Growers reviews the V-Diag Tool V200 Probe Automotive Circuit Probe and Breaker Finder Kit. Using a Mercedes-Benz ML350 and a lawn tractor, he demonstrates how the tool identifies voltage issues, tests fuses, and locates wire breaks, making it an ideal diagnostic kit for both professional electricians and DIY enthusiasts.
Hey guys, how you doing?
It's Henry, Emotion Growers.
Welcome to another weekend product review.
So this is my 2013 Mercedes-Benz ML350.
Currently it doesn't shift from park to neutral or drive.
Why? Because it hasn't been driven in
a couple of weeks. Because we're nearing winter, it gets cold at night.
So batteries don't do well
in the cold, especially the auxiliary battery,
and especially since I haven't driven in a while.
So the battery is weak right now.
The PCM needs to send a shifting signal to the transmission,
Which is why it doesn't shift.
Of course, this problem is easily solved
by simply taking an AGM battery charger and
recharging the battery, which eventually charges
the auxiliary battery as well.
But for other problems that you run into dealing
with electronics and electric current,
You need a tool that quickly finds your problem.
My friends over at V-Diag Tool has sent me this
two-in-one tool to troubleshoot electrical problems.
This is the V200 Probe Automotive
Circuit Probe and Breaker Finder Kit.
Let's open it up and check it out. Comes in this nice
plastic box. So the alligator clips.
Here's the breaker finder adapter for your 12-volt cigarette
here's the v200 pro circuit probe
with the attached alligator clips as well as a junction
switch along with a long cable
so you can move it around your entire vehicle here's the probe
there's another extension cable
and of course the user manual with this tool you can check
for all of these i'm going to connect the clips to this thing
and we'll try it out
so there was really nothing much to connect you just connect
the alligator clips to the battery
to this adapter here which goes through the long coil of wire
and this and you would just shove in
the probe this is the probe that you put in just like
that it had a protector on here so you don't
prick yourself anyway i removed the charger from the car
and now the battery should be charged
now when the battery wasn't charged it showed 11.9 volts
so with the mercedes you gotta
Plug the positive on this terminal here
and it has another negative terminal over here.
When you plug that into power, 12 volts,
the probe will now turn on and it says
DiagTool with zero volts.
You use the red button here to select between what you want to test.
OL which means it's like you know like continuity ohms
that kind of thing. I'm not an electrician
so I don't really know too much about electrical
so I'm just doing basic tests for you.
uh ol break i guess and here's voltage
so that's what we want we want voltage so like i said before
this car had problems it showed 11.9 volts
which isn't really enough to start a car well properly
it'll start but not well
so after charging the vehicle overnight we're going to test the voltage
and we'll just probe the positive and it shows
12.8 volts you go to the negative of course c0
But just touching the positive, it's showing 12.7 volts.
So it's dropping a little bit.
And it also has a built-in double LED light,
so you can see what you're doing.
If you have something in your car that doesn't seem to work,
you can check your fuse box and check all your fuses.
So you can open up your fuse box, and it'll reveal all your fuses.
Test all your fuses.
Good. 12.7.
This one says zero.
But usually some of these things switched,
which means that it's only on if you have the key turned.
And so you can tell
which ones
are like that.
Same goes with test lights, but this has an audible beep
so that you can know without actually have to look.
And of course, here's the main red wire
that goes to the box and it shows 12.7.
But lawn tractors is really more my specialty.
Common problems for lawn tractors is the safety switches.
For when you PTO the blades, for when
you want to start up, you have to keep your foot on the brake pedal.
You have to be seated on the
seat. When you're mowing and you go in reverse,
it doesn't let you mow in reverse if you have a bad
reverse safety switch.
And other common problems are the ignition switch.
to the solenoid to the starter motor
with this tool you can test all those things very easily
and we'll do the same thing we'll connect
this alligator clips to a power source which is the
battery to the tractor access is kind of difficult
on this one there you go now we have power to the
tool and we can test the voltage going
to the solenoid 12.3 you have to put the brake on
if you're not sitting on it now
when you turn the key you should get 12 volts for this one
So the trigger wire for the solenoid is right here.
So it shows green.
When I turn the key, it should show 12.
There you go, cranked at nine.
But if you were having problems with your solenoid
or your starter motor,
this thing can also push 12 volts of electricity
from the battery, bypassing the solenoid and the key
to your starter motor.
So without turning on the key, which I was doing before,
you can push 12 volts from this to start it.
So I'm going to tap the trigger terminal right here
and press this up button to push 12 volts.
You see that? So now you can test this without a solenoid or a key.
It's very useful if you were
dealing with a car and you were testing the motor of your car window,
for instance, and it wouldn't
go up. And you can push voltage to the motor
and see if the window goes up. If the window goes up,
then it's not your motor.
It's probably a break in the wire somewhere. And guess what?
because this is a two-in-one tool kit there's
also a breaker finder included in the kit
with this kit it also comes with the v200 pro breaker finder
this is the sensor probe flexible
with an audible speaker right here takes one nine volt battery
which is included by the way
how many things do you buy
and the manufacturer doesn't include batteries
so now you gotta stop what you're doing and go out and buy batteries
So this is like ready to use just turn on the power switch
and audible volume adjustment.
So this area is my junction for where I plug in all
my stuff power tool adapters charging bases.
This part here I have stuff plugged
into my outlets just pressing this button you can hear
the amount of electricity going on.
Closer I get the louder the sound.
Here's my garden extension cable that I use to power things
when I'm away from the garage.
You can hear power, power, power, power all the way around.
Now look, what if there was a break here?
Pretend this is an internal wire somewhere in a wall,
and you couldn't see where the break was,
and it's not working.
You're not getting any power.
You can sense where the power is.
Okay, you got power.
You got power.
You got power.
Now the sound has gone down.
There's no power until you go closer.
So you know right here is where there's a break.
And that is where the end
of the cable is. See? Nothing.
And that's how you can find
a short circuit or a break.
So this is a great kit for the DIY backyard wrencher like me.
if you're an electrician
who understands everything about ohms and continuity
and you can use a multimeter like it's nobody's business
then this thing is even better for you
but for a basic guy like me i can test where circuits are going
i can test parts by pushing 12 volts into a motor
and these things are very handy
for troubleshooting electrical systems you guys want
to check this out yourself
I'll leave a link in the description.
I hope you guys enjoyed the video.
Remember to like, share, and subscribe
so I can continue to bring you great tools for DIY projects.
Have a great day.
We'll see you guys next time on Mowers and Blowers.
See you guys next
time on Mowers
and Blowers.