WITHOUT PRODUCT REVIEWS, SPONSORS, DONATIONS AND STICKER SALES, I’d have to go back to work and not do ANY videos, because you can’t live without any income.
Good morning. How you guys doing? It's Henry.
At most, it blows. As you saw from the last episode,
I was struggling big time to try to cut up all
these big logs with my mini chainsaw. Zombies.
Please?
Did I get you? You can use this saw and cut trees down.
Because I left my gas chainsaw and my badger
chainsaw at my mother's house.
Well, I went and cleaned up some stuff at my mom's house.
And I brought them back.
So we're going to go to town on these bigger logs
so I can transport the manageable pieces to the backyard
and whip out my, excuse me while I whip
this out, built hard 22 ton gas log splitter.
But I want to try something. Instead of me going
to town first with the gas chainsaw, I want to try the badger again.
Because recently, I feel like the power isn't that good anymore.
Also, the chain is kind of worn.
The minute your chain touches the curb, hard rocks,
or most importantly, any dirt,
it gets super dull and you won't be able to cut ----.
So I think I may have to eventually change the chain.
I believe I have a few chains from my friends over at Hypoparts.
Well, let's see if it fits, because not all chains fit,
even though it's a 12-inch.
You have to get the right pitch, the right link count, all that.
Anyway, I'm going to try to cut this log
with the badger, see how it goes.
But first, before I cut this log, I feel like I have to go pinch a log.
Oh, the relief of pinching a log.
Okay, okay, okay, I got it, I got it.
I can't do it.
Here we go.
Yeah, so the power's there.
The chain's dull.
So I think this is a 12 inch.
I'm going to go whip this out of chain and see if it fits.
Right here I got a 12 inch chain from my friends over at Hypa Parts.
Go to hypastore.com or
hypaparts.com and use discount code Henry
and you'll get 10% off your entire order.
Let's put this on. I even marked it 12 inches.
So this is a 12 inch 3 8 inch LP.
0.043
something
and 45
something.
I believe
it's links.
Half inch
nut.
You're a nut.
It's always a
pain to uncoil this thing. It's pretty good.
Now remember when you put it on you got to run your
fingers along the top. See if it catches and it doesn't.
So it's probably this direction. Yep
catches. Catches your skin.
So this is the part that goes on like that. I should brush that off.
And I don't think I put any bar and chain lube for a while.
Very oily here because there's a lot of bar and chain lube there.
You want to clear the passages for where the bar
and chain oil actually come through.
Here we go.
But if sawdust and crap is blocking it,
you're not lubricating the chain, which doesn't help it cut.
I guess this video is going to be how
to change your chain of your chainsaw.
That would be appropriate.
Yeah, it takes a little while.
This is what happens when you're crazy.
Now this tightening stud right over here goes into the hole.
Now it fits before it didn't.
Seems
a
little
tight.
That's what she said.
Put some
lube
in here.
Guarantee you there's none in there.
Yep.
Completely dry ski.
I've been running this thing without any lube.
Sometimes it gets dry.
You gotta lube it.
And no, you can't hock to it.
Oh, you gotta give him that hock to it.
Spit on that thing.
You get me?
What?
I hate delays,
but you have to do it.
See if it works now.
Much better, but I
think I tightened
this too tight.
You're supposed
to be able to pull
this easily. It seems
a little different.
It works okay, but
in the beginning
though, with the
original chain,
it senses
by itself the
resistance and it kicks it into another gear,
like a faster motor speed. It doesn't do that now.
i think maybe if i just run it
a little bit longer it'll loosen up a little naturally
and then the motor will be able to sense it
because i can't figure out what's wrong with it
but as
long
as it's
doing
the job
electric
has a way
to go
20 inch
chain
as usual
i can't
find
them
i know i have one but i just can't find it drives
me crazy anyway you could also sharpen it manually
but my sharpening tool is too thick
that's what she said i'm just gonna do the best i can
So check that out, huh?
Nice.
I decided to save the badger one for the last big piece.
And it did great.
Look at that,
12 inches in diameter, perfectly.
And it cut it, no problem.
It did start to loosen up and it started to sense.
So I saw that once I went down like an inch,
it felt the resistance and the sensor kicked in
and the motor started spinning even faster.
So this is all set and it brand new chain,
works great.
A brand new chain is key.
Without a sharp chain, it's not going to cut.
So Hypa, if you're watching, and I know you're watching, darling,
I need more 12-inch chains and a 20-inch chain.
Remember, if you guys want to buy some chains from Hypa,
also carburetor parts, lawnmower parts,
go hit up hypastore.com.
Use discount code Henry for 10% off.
I'll leave a link in the description.
Now I'm going to transport all this stuff to the backyard and whip out.
Excuse me while I whip this out.
Hard lock splitter for some more fun.
These mini hand blowers are
super efficient and super easy to use.
Gets the job done in two seconds. I know it doesn't look
like much, but you guys have seen me use this in a lot of videos.
It really has a lot of power.
I think this is now sold out, but there's a lot of similar ones.
I'll leave a link in the description.
I'm not going to bring this to the backyard today.
I've got somewhere to go.
But I'll see you guys in the morning.
Hey guys, how you doing?
It's been a couple of days.
Yesterday I went with my buddy Andy from Jericho.
I'm Andy from Jericho.
But we went to the new Bass Pro Shops that opened just
a week ago over in Sayreville, New Jersey.
He had to go over there for something anyway, so I went with him.
Spent the whole day over there.
Eh, it's okay.
if you guys are interested in watching
that video it's live on my mowers blowers and guns channel
on mowers blowers
and guns go check it out yourself today i'm gonna be transporting all
this wood to the backyard
and i'm gonna be whipping out my whip this out built hard
22 ton log splitter i'm gonna split all these logs in a jiffy
and stack them up
and prepare for old man winter it's around the corner even
though today's a nice day
it's inevitable
it's gonna get cold
all right as you
can see i brought
all the logs
from the front
to the back cleaned up
the front area you know what i'm tired already i'm gonna soldier on and
we're gonna get all these logs cut up it's
a nice day today the bobster's out here with me
bobby say hi to everybody hi
i'm gonna fire that up now just
added full tank gas it's on choke
Switch is on.
Fuel is now trickle, trickle, trickling.
I haven't ran this since last time I did this,
right? Let's see if it runs.
Run for a little
bit just
to circulate
the lubrication.
Okay,
I
had
to
stop
because
my
battery
on
my
phone
is
blinking.
Gotta go inside and charge again. Got a couple more logs left,
but look at that huge pile. I'm gonna put those piles into stacks
and finish off those last three.
Hard
work,
tough
on
the
back,
especially
if
you're
my
age.
I picked up some of these loose wood chips and stuff,
put them in boxes so I can use them as
kindling, start a fire, you know? I don't know.
I don't really think it's all that much wood after
all. I thought I was going to be able to pile it all
the way like eight feet tall, but then again,
I did make two extra rows, but I don't really think it's that much.
I think I need more.
Anyway, I'm going to winterize this right now.
I turned the fuel shut off off.
I'm going to run it, burn all the fuel in the carburetor bowl
and the fuel lines from the gas tank
so that there's no more fuel dripping into the carburetor.
That way, when I'm ready to use it again,
just turn the fuel on, start it up.
That way, that ethanol doesn't break down,
and you're going to get your carburetor clogged.
Remember, you've got to do that, because I don't know
when I'm going to use this thing again.
It's easy enough, but yeah,
I am stocked with wood for at least the next two, three seasons.
But if I find wood on the street, you bet I'm going to pick it up.
All right,
that's it.
Now this
is ready
to store.
Off, your shutoff is off.
I'm going to put the choke on just so that the flap is closing it,
rattle all the way down.
All right, now I'm going to put it away.
Hope you guys enjoyed the video.
Remember to like, share, and subscribe
so I can continue to bring you
getting ---- done
and splitting more wood.
Have a great day.
We'll see you guys next time
on Mows and Blowers.
See you guys
next time
on Mows and Blowers!