WITHOUT PRODUCT REVIEWS, SPONSORS, DONATIONS AND STICKER SALES, I’d have to go back to work and not do ANY videos, because you can’t live without any income.
you guys how you doing it's henry at mowers
and blowers welcome to another weekend product review
i've got another item here that us diy
do-it-yourself backyard renters need for any
small job dealing with electronics
or electrical circuits yes as you guys know i deal with tractors
a lot and i'm always messing with the electrical harnesses
for the ignition system to the electronic
solenoid to the starter motor
and while i've gotten really good at diagnosing those issues
what really helps me out is usually a multimeter but what's even easier
is a two-in-one voltage tester from my friends over at kaiwheats
i've reviewed these items before
but this is a new version what's so important about this one
This has the capability of contactless.
The reason why I don't like electrical is because of the
accidental jolts you get. I have to have a habit
of wearing rubber gloves when I deal with electrical.
This is low and high current capable up to 1000 volts.
I don't want to think about 1000 volts
which is why this contactless thing can sense
voltage without even touching the electricity.
I'll open it up and show you what it's about.
This is the Kiweets 2-in-1 Voltage Tester.
It's the KTL-01S version.
Comes with instructions.
I never read the instructions, but you should.
How many times do you buy something,
but the manufacturer doesn't give you batteries?
So you gotta stop what you're doing and go out and get batteries.
As if you didn't have any of your own.
But it's great that they give you some batteries.
There you go.
little pen light kind of thing.
You can just hook onto your belt or your shirt. Obviously it takes
two AAA batteries. Uh-oh.
Be careful of this cap.
I almost lost it.
You can switch the probe
from just a probe to a Philips
screwdriver, and you could switch it
to a flathead too,
if you want.
Put the batteries in.
Positive in first.
Turn it on. Long press.
There we go.
It has an LCD display.
It has a clip. Can you just...
Clip it. So to detect electricity,
you need to have it on the probe, not the screwdriver or the
flathead. When it's on the probe mode, it shows zero percent.
What I mean by contactless is you
don't have to touch anything to detect electricity.
As you can see my mess of my power outlets.
Watch this. It's on 12 volt sensitivity.
It's getting three percent.
that's how you can detect electricity without even touching anything.
i'm going to show you what the display looks like. so here we go.
as you can see it's on 12 volt. you can do sensitivity to
70 volts.
12 volts. and it goes up to at least 1000.
and this is ac. alternating current. we
go. right now we're not even touching
anything. three
percent. here's
my outlet cable
that i use for
everything. it's like frayed and i need a new one.
Looking at it.
0, 10, 20,
30, 70, 99.
Let's walk towards my refrigerator.
You know, these things give off a lot of electricity.
See the lights in the door?
That's LED.
Oh, you can tell right here is where it connects to the power.
Power of the strip starts there.
As you can see here, this is where all
my power tool batteries are being charged.
I have hundreds of outlets there.
I'm just going to walk towards it.
This is a fire hazard around here.
This is where
my outlet is.
So if you try to do things yourself,
you're a DIYer or you need to check electronic circuits and stuff,
this is a perfect little tool for you to gauge where the voltage is,
where there's current, if the current's hot or not.
And you can use it with low and high current too.
Very easy to read screen with an audible beep.
Also doubles and triples as a screwdriver.
Phillips or Flathead. And you know what?
This is like 15 bucks. Buy it on Amazon or their website.
I'll leave a link in the description.
Hope you guys enjoyed the video. Remember to like, share,
and subscribe so I can continue
to bring you really useful DIY gadgets. Have a great day.
We'll see you guys next time on Mowers and Blowers.
We'll see you guys next time on mowers and blowers.