WITHOUT PRODUCT REVIEWS, SPONSORS, DONATIONS AND STICKER SALES, I’d have to go back to work and not do ANY videos, because you can’t live without any income.
Hey guys, how you doing? It's Henry at Mowers and Blowers. Welcome to another episode.
These are two Kohler Courage single cylinder blown engines. I got them at different times
from my friend Nick from Bellport. This one, as you can see, is definitely blown.
This one I used for parts to fix another Kohler Courage engine that's currently in
my six-wheeler military desert sand hauler. Now after I got that hauler fixed and finished and
I was riding it around to do nothing, I guess, but it is a pretty cool project that I did
sometime last year. Anyway, that engine had two cracks in the back, very similar to that.
What happened was I actually JB welded it so that it wouldn't leak oil. But the past few times that
I've been running it, it smoked a lot. So I think that JB weld gave way and it's leaking oil out of
the back cracks of the engine block. So hopefully today I can gauge the condition of both of these
and maybe I can make one good running engine out of the two. And at the very least,
maybe take the guts out of the engine in the six-wheeler and put it in one of these that has a
good engine block with no cracks. That would fix the leaking. So essentially, I'm going to try to
make one good engine out of three engines. I'm going to start by inspecting this one to see if
the bucket is good, meaning no cracks. And then I'm going to take this one apart and see why this one
blew. I'm betting 90% is because of a blown connecting rod or a failed synchro balancer.
since the end of that time-lapse that you just saw because neighbors keep walking by. It's Sunday,
so neighbors keep walking by. Talk to them for an hour, talk to this neighbor for an hour,
next thing you know, I don't even remember what I'm doing. Anyway, I took that engine apart. I
took that engine apart. That engine over there is actually pretty much already taken apart. I've
taken it apart already. Inside that engine actually has a connecting rod and piston with rings and
assumably it's in good condition. So that bucket actually is good. There are no cracks in that
short block. So that's a good short block to use. I think that's the reason why I kept it.
It has a good sump cover too, and it has, like I said, a connecting rod, a piston, and rings,
and a magneto, plus a box of other stuff. A cylinder head. I don't know if I have a flywheel
in there, but it has all the stuff. Anyway, this one here, the most recent one that I got from Nick
from Bellport is a Courage 19, all right? And Nick gave it to me because it was blown, and there's a
huge crack right there. See? Huge crack speed. So taking off the flywheel and the camshaft,
take a look at that. So the cam gear is actually trashed, which is unusual because I almost never
have the crank gear go bad. And look at that large amounts of aluminum transfer on the crank journal
there. Lots of it. That's where the links to the synchro balancer go. That's a good surface because
the connecting rod, believe it or not, was still connected. That looks good. Everything looks good
up to there. So you have the aluminum transfer, and most of the trauma happened at the gear area.
The sump cover appears to be good. This is a good-looking stator. Magneto has a little
rust on it, but good sump cover, magneto, stator. I think this crankshaft would require a lot of
smoothing out on that journal, and unless I had another gear, probably couldn't use that.
But I think I do. Here it is. Boomski! So believe it or not, the connecting rod was good.
Connecting rod was still connected, okay? Good ends, too, to the connecting rod.
But what blew this one up was actually the synchro balancer. See? Those are the links to it.
Catastrophic damage. Just completely disintegrated and blew out the back. The balancer just was so
heavy, and it came off and just knocked it right through there. So where is it? There it is.
There. See? That part of it is just missing. Some damage there. So it's just the weight,
but everything else is good. So, I mean, assumably the cylinder head's good, too.
I managed to get the head gasket off without damage. Valve cover, throttle bracket, cover.
So, of course, we can't use the bucket. The short block is trash, right?
Done. That's one of the biggest cracks that I've ever seen in a blown engine.
That's huge destruction. So this is all trash. This is good. This is questionably repairable,
but I'm pretty sure I have another one. And the flywheel and the starter is good.
So we have a good bucket, two good sumps, two good stators, two good cylinder heads.
I have two connecting rods. I have, like, parts for cams, and this has a good ACR, too.
So all I need is a bucket, and I think I need a new weight. So if I don't have a new weight,
I couldn't put it back together again. So I'd need to go look at my parts in the shed
and see if I have a Kohler Courage synchro balancer counterweight, because I have two
pistons, two connecting rods, got a flywheel, got a starter, got a good bucket, got a good
stator, got a good sump. So I can put together a new rebuilt Kohler Courage engine if I could just
find a good condition crankshaft with a good synchro balancer. I'm going to go look now.
Okay, I went to the back and I got some extra parts. So this is the blown synchro balancer
from this block. I found this in the back. They're exactly the same. This is obviously
more rusty and stuff. So I could take these arms and bar and connect them onto this,
right? So I would have that. This is the links that links the synchro balancer onto the
crankshaft. This is a crankshaft that I found in the back. Obviously, it's rusty with a lot
of aluminum transfer on the journals. I would just use this one because this is out of this
one and it seems undamaged in the important parts here of the journal. There's aluminum
transfer here, but I could probably smooth that down with oil and fine grit sandpaper.
This gear, of course, is trashed, but I also did find a new gear, a good condition gear,
and it is the same one. So I have that. So I would use this crankshaft, this gear,
clean that up, right? I would use this new synchro balancer that's in good shape. See,
just rusty, but the four corners are here as opposed to this one breaking.
Problem is, this is only one link that I have and this link is broken. I need two of these links.
This is what was destroyed in this one. These are the links. This is destroyed.
So looks like I have enough to put a new Kohler Courage engine together if I had two of these.
I need two of these. But then looking here, what does this look like? This looks like the
governor gear. The governor gear on this engine is mounted on, I think it's here,
on the top of the sump cover, and this one is destroyed. So I don't have a governor gear.
I don't have links, but I do have a crankshaft, a balancer, the bar and arms to attach it to the
block. I have a good, I have actually two connecting rods, pistons, rings, two-cylinder heads.
Huh, wait a minute. I think I might be able to get a governor gear.
Why? What if the governor gear is good on the bottom of this sump cover?
Does this have a good governor gear? It does. This thing here is a little bent.
So this is a good governor gear. We would use this sump cover and of course we would use
this block because there's no cracks in it. It does have another connecting rod with piston,
but I still can't put a good engine together because I don't have links.
So that's it. I can't go any further. I packed everything up. I've got the good short block
with the sump cover here. I've got two big boxes full of parts and the only thing I'm missing
right now are the two links that go onto the synchro balancer. I still have to smooth out
one part of the crankshaft with some fine grit sandpaper and oil. Smooth that journal out,
the bearing, and then the crankshaft gear. I thought I had a good one. I had two.
One goes on, but it's like loose. It's kind of like a bigger diameter one, which is strange.
It's probably not for the courage. It's probably for like a command or maybe one of those 420
engines I got back there. And then the other one fits perfectly, but two teeth are kind of
rubbed in the wrong way. You know what I mean? So I need a crankshaft gear. I mean, it'll work,
but I'd rather have a good one. And I don't know why I don't have any. I used to collect
all the parts for the Courages. Anyway, I need a crank gear and two links to the synchro balancer,
and then I can rebuild a Koda Courage engine, but I'm missing those two parts. I also have a
Briggs & Stratton single cylinder, and I'm missing the sump cover with the semi-circles half moon
thing to hold the synchro balancer in. So potentially I have two good engines that I
could rebuild, but I'm just missing the parts. And you know I'm too cheap to go buy it because
I know eventually I'm gonna get another blown engine from somewhere and I'm gonna have that
part. I'm in no hurry. I have two extra engines right now as it is, but I potentially could have
four spare engines. That's great. Also there's so much crap in my garage. I gotta get this out of
it because I'm not gonna sell it obviously. I have it listed for $175, not one bite. Nobody's
interested in this. So I drained the fuel out of here with the remaining fuel in the bowl.
Hopefully it'll make it to the back. I have an area in a shed that I could fit this in.
That's it. I'll throw these parts in the back too. Whenever I get anything for a Koda Courage,
I'll be able to put this engine together. If I find that sump cover, I'll be able to get
that Briggs one going. But anyway, it's just putting some engines that are blown together
and hopefully making one good running engine. Hope you guys enjoyed the video. Remember to
like, share, and subscribe so I can continue to bring you small engine content like this one.
Hope you guys have a great day. We'll see you guys next time on Mowers and Blowers.
Happy 4th of July.
I've been charging my car battery for about a day and I brought it from 45% healthy to 85%
healthy. Zero charge to 100% charge and now it says good battery. This desulfator is something
else. See you guys next time on Mowers and Blowers.