Greetings to my 99.4% male audience. Getting it done for 25 plus years with neither drama
nor fear of spiders. I see you. Now in episode two of our ongoing series where we are turning this
beautiful 2007 Land Rover LR3 with the V8 petrol engine into the greatest canine search and rescue
response vehicle ever, we are going to be installing the LensSun hood mounted solar
panel specifically designed for the LR3 and LR4. Obsession. Brought to you by Waffle Square.
Will our beloved LR3s become very grumpy if the battery falls below the preferred voltage?
So if you live in an area like this where it's sunny, unlike the UK, Pacific Northwest,
and Alaska half the year, then LensSun has a great solution for our problem,
and that is this hood mounted 110 watt solar panel complete with a charge controller that
hooks right up to the car battery. Now gird your loins because for the next 24 minutes I am going
to go through step by step the process of first prepping the hood, then installing the
hood decal, testing and installing the solar panel, installing the charge controller,
and then finally looking at the production we're getting with their free app. Now don't worry if
24 minutes is too much to ask you to focus. I have broken each section down into chapters,
so let's get started. Now obviously you want to start with a clean hood, but you know me,
I obsess about everything. Run your fingers across your hood. Do you feel all that debris
even though it's clean? Those are embedded impurities in your clear coat. Metal, road grime,
tree sap, all kinds of stuff. I don't want that underneath this film. I want to get as clean as
possible. So I'm going to use this mother's clay bar kit. I'll leave a link for it. It basically
consists of this auto detailer which is acting as a lubricant and this clay bar. So we are going to
pick out one to two foot square sections at a time and we're going to spray the lubricant on
and then rub that clay bar until we don't feel that resistance anymore on the paint.
And each time you move to a new section you should knead like you would with bread dough
this little piece of clay and then as you work away from that spot you wipe it off with the
microfiber towel. Pretty simple. It would probably be better for me to do this with gloves on but I
really want to feel the difference with my fingers and I don't feel like I could do that obviously
with gloves on. Let's put this in my pocket because there's a slight breeze and we'll get started.
Shake well. You can feel resistance at first and then it gets really slick so you can tell
it's working. It's pretty wild. It kind of smells like peppermint. Now the reason all our red dirt
here in southern Utah is so red is because there's a lot of iron ore in it. I don't know
if that has anything to do with this but it's turning red. And there we go. What is that five
ten minutes maybe? Such a difference. Now if you have a kit that only comes with one clay bar
you're welcome to put it in a ziploc baggie and save it for the next time especially if you're
intending on doing the rest of the car in kind of one day or something like that. This kit however
came with three bars so I don't really feel any need to keep this one. All right very exciting
installation days here. This is the hood decal. It comes rolled up in a tight roll so I have it
stretched out over a box here so that it can breathe. And then over here we have the solar panel
so you get several instruction or installation manuals here. You get this sheet of paper here
for the hood decal and also that blue squeegee right there for when you're using soapy water
to make sure you get all the bubbles and soapy water out underneath that hood decal. Then we have
the solar panel itself underneath there in a bag and if you look here very interestingly that is
a 110 watt solar panel. That's quite a bit and I should note though that flexible solar panels are
not as efficient as the standard hard encased ones so you won't get that same production out of it
but that's still quite a bit for theoretically one or two car batteries. In the center of your
screen right here those are two bags of 3M double-sided adhesive that is for putting the
solar panel onto the decal. You have the solar panel installation manual over there. You can see
coming right out of the center where the hood meets the windshield is this cord and it has
obvious connectors right there for solar panel type connectors. If you come over here you can see
those match the solar controller that you get. It is a LensSun solar controller and it comes with
its own installation manual and operator's manual and also you get a sheet here explaining that you
can download an app to control that. Basically it'll tell you what your production is coming out
of the solar panel going into the charger and the state of charge those sorts of things. I think that
will be very useful once we replace the stereo with something that has like Android Auto type of
iOS in it and we can monitor right from the vehicle how everything's doing rather than putting
another app on my phone which I'm really not that interested in. All right I want to now do a final
degreasing so I have 91% isopropyl alcohol and I have a microfiber towel that I ripped
right off the roll as you see here. That way I know there's no dog hair on it there's nothing
implanted like little wood chips anything like that. We're getting the best possible degreasing we can.
That is looking really clean that is good. I want to pay special attention around the windshield
wiper fluid dispensers here because that's often a spot where if somebody was waxing it gets built up
and also that is a open area where if we don't get good adhesion there it could start
bubbling up. When I'm done degreasing everything I'm going to pay extra attention to go right along
the edge and wrap around of the hood or bonnet here because that hood decal might have some
excess that needs to wrap around and adhere. Now even though that decal ends right here where the
hood slopes down on both sides I want to make sure I got the whole hood because we are going
to be spraying soapy water and then putting the hood decal down and it's very movable until we
squeegee all the water and bubbles out so I want to make sure we're not picking up grease or any
other impurities along the sides if we're shifting it around in that initial lay down and final
position. I also want to remove this bug. How dare you sir. That would have been nice to have some
help today but all my girls are busy. That looked good. All right we look pretty good and lined up
so I'm going to start squeegeeing from the center out. So check these little lumps out here.
All they need is a little bit of heat. In this example friction and those start to adhere
much better so don't panic like I was doing. Just apply a little heat and I think we'll be just
fine. Now before I let this sit for the night I'm using these little tiny clamps to wrap around
and hold this tight so it doesn't bubble up and crease right here like it was doing.
And to protect it I'm just using a little trick here with some painters tape. Putting it in there
clamping down and then you can see both feet are going to be protected by the tape so they
don't mar the surface. But also as you push it in and clamp down you can push this way
as you see here and it will apply pressure right at that edge just like that. So while the hood
decal is drying and we can't make any other progress I thought it might be a perfect time
to test this solar panel and as you can see here we are right around 22.5 volts which is great.
That means that our charge controller is going to be able to step that down to the perfect amount.
Well you can't test the charge controller without a battery hooked up to it. All three
LEDs just blink crazily so I just have a small little hobby battery
hooked up to it. Now we can see we have solid yellow which means battery normal. Blinking green
means that it is charging and if we come over here disregard the flicker it is 12.78 volts so
we are actively charging this battery. Look overnight all this debris that has settled on
here. We have a lot of construction in our neighborhood and it's just
nasty and we're in the garage but otherwise it looks good.
So it's the next day we have to wait 48 hours so we can't actually mount the solar panel today but
we can certainly put on this 3m tape that is so sticky it's just waiting it's saying put me in
coach I'm ready to play. All right one microfiber to wipe off all this shipping dust and the second
one to degrease and clean. Well it's an exciting day I know Maverick's excited 48 hours has passed
and we are going to be finally affixing the solar panel to the hood. As you can see here I've taken
the time with my tape measure to take a couple measurements make sure we're perfectly centered
and then I taped a perimeter all the way around because I am going to take the optional step of
putting Sikaflex all the way around for a little bit of additional weather sealant. Then I put this
tape up here I didn't want to tape the entire side because the panel is wanting to be more
straight than the sloping or arching hood. Therefore if I were to tape it down the whole
way when we go to bring it up it's going to fight against that so I only taped the very
center area and that way when we raise it up it's very easy. So the next step is to remove
all this red stripping and once we do that we can lay it right down on the decal that I have
already rubbed down with alcohol. This 3M backing does not want to come off just by kind of picking
it with a fingernail I had to get my utility knife out so hopefully that means that we are going to
have very good adhesion if it's this difficult to get the backing off. So for the finishing touch
to the solar panel install we are going to be sealing the outer edges with Sikaflex.
Now I took a good hard look at these areas here where the washers are cut out and I just don't
know if I can seal that and make it look good. So I'm dubious about getting in there and not
making it look like just a splattered mess but along these areas here you can see I've gone
around and I've taped the whole perimeter of the panel and with a razor blade I cut around these
corners and that way I can run a bead right along here and regardless of whether or not too much
comes out I'll still be able to smooth it with my finger and immediately peel the tape away to
reveal a smooth line. The problem you run into running beads of caulk especially up here where
we're at 5,800 feet in altitude is that the pressure is built up in these tubes of caulk
and as soon as you start rolling a bead it just wants to keep coming out. So for safety's sake
I have tape and I have a paper towel let's get started. Well this looks fantastic especially to
the casual observer in fact unless you get this close which you'd be kind of creepy you'd never
see any imperfections so I am very pleased. Now the Sikaflex bottle says that this will be dry
to the touch in one hour but could take up to seven days to fully cure. Nonetheless it's four
o'clock in the afternoon I've got my evening chores to do so we're gonna let this sit just
like this overnight. All right it's the next day it's gonna be another exciting day for me because
now we're gonna be hooking it up. So a couple things the instructions say if you aren't hooking
it up to the battery of your vehicle you are instead hooking it up to say a Jackery or EcoFlow
or some sort of self-contained power system. Then you want to use this one here obviously you need
an extension to go from here to this cable then you run it wherever in your vehicle to a large
stereo jack like this that plugs into the Jackery. We're not going to be doing that of course we are
going to be utilizing this solar controller. So the next thing I want to do is pop up the hood
let's start looking for a good home for this solar controller and we'll get everything installed and
we'll talk about the order in which we install it. All right real quick some of these are obvious
some are not so obviously this is for your battery you can see the little battery symbol here here is
the solar panel symbol. Then you have what looks like a light bulb that's if you want to hard wire
in a source that every time it's receiving power from the solar panels it is feeding it out to an
auxiliary source. I didn't care for the way the wires were kind of exposed so I just took some
shrink wrap and a heat gun and I shrank that down to protect that. We're gonna not do anything with
those in our case and then finally this little guy right here is your antenna for the bluetooth
connection so that you can run the app and see how your production is going.
All right I have loosened this bracket right here let's see if we can pull it off yep there we go
because I want to try getting this solar controller right down below here.
Now right on the front of the solar controller as you can see in this picture here the directions
say to connect the battery first and then make the connection to the solar panel so let's go
ahead and do that and then we should be able to check down here and see some led lights.
Lights are on let's go ahead and make our connections to the solar panel.
Now we need to leave enough room that the cable from the solar panel heading in
is able to move freely when the bonnet is opened and closed but if we go just like this
then it is popping up like this huge loop that looks terrible so instead we're gonna have to
hold it down with these included little adhesive clips with zip ties I'm gonna try to pull it in
like this and bring it right there now let's see better all right we're sitting here in the driver's
seat with my ipad mini and we're looking at the production that we are getting now first of all
when you go into the app here you need to pick solar life even though it's a lens sun solar
controller you still want to click on the solar life which kind of makes sense once you get in
there first of all uh it's very spotty reception meaning it kicks you off but I first want to let
you look right here at pv that is the amount of watts that is being produced by the photovoltaic
solar panel on top of the hood so it's three o'clock in the afternoon now four o'clock and
the sun is very bright and we're getting about 51 watts so less than half of the potential of
the solar panel the battery is doing good since we started looking at the parameters
we are up to 13 volts and you can see that the battery temperature is 84 degrees fahrenheit
so some pretty good information here one thing if you go into parameter settings
and you go into the battery parameter settings it's showing it as a gel battery which I didn't
think a standard lead acid battery was gel but if you go in and you try to change it to say
liquid it won't accept that parameter well there it goes now the reason battery parameters oh see
it just kicked me off oh now it's back uh the reason that battery parameters is important
comes into play with your lithium-ion batteries for example they typically come with a little
card full of information on specific parameters that are best suited to charge and maintain those
batteries and you can put all that in with the float voltage all that sort of stuff in the advanced
settings so you would want to set it first to lithium-ion and then you can go through all
kinds of different settings to that are best suited for that in our case we just have a standard
automotive battery so it should know when it's fully charged and it will cut back on that
nonetheless this is what the app looks like it very much wants to be a phone app you can see
it's just in the exact shape of a phone no matter how you turn your other device
so if we load this app into a future stereo i expect it to just look like this when i'm
rolling down the street that's fine with me i can still get plenty of details out of it
and there we go found all or any of this video helpful will you please give it a thumbs up it's
really helpful to the channel also please consider subscribing do you know that 87 percent of people
that watch these videos are not subscribed that could be life-altering for this channel and it's
free so the more people subscribed and viewing then the more the youtube algorithm suggests it
to other people the more other people that watch we get more ad revenue which i put all that revenue
back into this vehicle such as the plan i have for organizing this back trunk area whoo it's bright
over here this thing's definitely doing its job if you're interested in this product i'm going to
leave a link for the exact unit in the description below with everything you see here the solar panel
the hood decal and the charge controller it's around five hundred dollars but you can mix and
match what exactly you want whether or not you want the controller or the decal they have that
solution for you i'm also going to leave amazon affiliate links for everything else i used in this
video now full disclosure if you click on those and end up making any purchase and won't cost you
a thing but i do get a small reward at the end of the month so thank you to everyone that's been
using those links now maverick and i serve a very rural county and come nightfall there are a lot of
cows and deer along the roadways we also respond to the elderly that tend to walk away from their
homes at night or don't come home and runaways all of which happens typically around dusk or
nightfall so vantrue a very cool dash cam company uh was excited about this build they reached out
and they are sending us cue the amazing cinematic reveal this awesome thermal dash cam system and
that is going to be installed in our next episode now with all the business taken care of let's read
a few comments from our previous episode nrl 10 29 says hey mike regarding the rear windows check
the power to the fuse for the rear windows they are on a separate circuit from the front windows
that is a fantastic tip and i'm going to do that at app catalog says great video of maverick and
some old car mike but seriously good to have you back thank you very much loyal viewer jerry green
says sorry but i have to correct you maverick was definitely the star of the video i'm excited to
follow your maintenance upgrades and the use of this lr3 well i'm sensing a theme here haha
now before you go thinking that my partner maverick is some sort of dog prodigy i will
leave you with this video that i recorded on a training day earlier this year embarrassing
hey it's not real it's just a statue hey cloud this this is a video about solar panels thank you