Can iOS 13 Handle Canon EOS R 4K?

Waffle Square
9 followers
7 Video Views·Feb 1, 2026
In this video I test iOS 13 to see if it can handle 4k video from the Canon EOS R.
All front and overhead video shot in 4K with the Canon M6 Mark II: https://amzn.to/2pnx1wo
All test video shot with the Canon EOS R with RF 24-105mm F/4L: https://amzn.to/33lShCo
All video editing done on the iPad Pro using Lumafusion (available in the app store).
Overhead shots were made with this ZOMEi 75'' Camera Tripod for DSLR: https://amzn.to/2ZZOOKS
All audio recorded with the Rode Wireless Go: https://amzn.to/2LvOgnS
In conjunction with the Rode Lavalier Go: https://amzn.to/2Lvuysu
Email: [email protected]
Hi, I'm Mike.
Welcome to my Waffle Square,
where I obsess about things,
and you get to benefit from it.
So has iOS 13 solved all of our issues
with the iPad being incapable
of downloading 4K video from the EOS R?
Today, we're gonna find out.
All right, quick backstory.
I lamented in an earlier video
that 4K video, when you try to load it directly into photos,
shows up with this red exclamation point
and isn't recognized.
1080p videos upload fine,
but kind of defeats the purpose
of why I purchased the Canon EOS R
with its high bit rate.
But a few days ago, I upgraded to iPadOS 13.1.
So now let's see if there's any differences
loading up video.
First, we'll try directly loading up to photos.
Nothing's happening,
but I do see an import button down here.
That's new.
And here comes everything I've been working on.
So I've got photographs here,
photographs here,
and then these are all videos,
and none of them are coming up with previews.
So these may look like they're all selected,
but actually, they're not until they turn blue.
So let's select this one piece of video right here
that I know is 4K.
Not happy with the fact that you don't get a preview of it,
but let's try importing it.
No luck.
Still getting the red exclamation point.
So down here, I shot some 1080p video for slow-mo.
Let's try one of these
and see if we can get those to upload.
All right, looks like all these 1080p files
downloaded just like before.
Let's keep those, pull out our dongle here,
and let's see what we got.
Okay, so it is starting to play those.
All right, so every one of those 1080p files
loaded up into photos just fine,
but we could not get the 4K.
Let's not give up, though.
Let's try going into files
and doing it this way,
since this is supposed to be all revamped with iOS 13.
Okay, so this is quite new for iOS 13.
Look here, you can see that the SD card
has been recognized in files.
That's pretty cool.
We'll click in here.
Let's go down through our file folders,
and now we've got the reverse,
where none of the raw files show up with previews,
but these videos do.
Let's try this one.
It's one gigabyte, about 30 seconds,
so it's an introductory video that I shot yesterday.
Mike with House on the Mend,
and in this video, we're gonna be reviewing
the Ryobi 8-inch Pulsar.
Specifically, this is the Pulsar 361,
because the audio is off,
and it's off quite a bit,
but nonetheless, it's playing.
Let's see if we can download it.
All right, next, we'll jump over here to LumaFusion.
Let's try opening a new project.
Let's see how quickly it loads up
and whether or not we can scrub through it.
And it's not jumpy at all.
Hi, I'm with House on the Mend.
The audio's linking up here.
the Ryobi 8-inch Pulsar.
All right, let's drop it down,
and since it loaded right onto the iPad,
we don't have the tick-tocking that we had
in a previous video with the WD My Passport.
Well, everything was seemingly going pretty well.
The video was loading up onto the iPad
through the Files program.
I was able to import it into LumaFusion,
and it seemed like it was gonna be a success
until I started editing the videos
that were longer than one minute.
I had several overhead shots
that I made with the Canon EOS R in 4K,
and when I started scrolling through them,
I noticed that consistently,
after about the first minute and 15, minute and 16 seconds,
the video froze,
and then the audio went to white noise.
Yes, very annoying.
So I checked all three of the videos,
and they were the same way.
It seems that anything under a minute recorded
and uploaded onto the iPad just fine,
but anything over that, I had this same issue.
So that's obviously unworkable.
So rather than call it a complete failure,
I went ahead and did one more set of experiments.
I took the Canon EOS R with the two SD cards I have for it,
both of which are rated 300 megabits per second
and are supposed to be able to handle the 4K footage,
and with each of those SD cards,
I recorded over one minute in footage.
In fact, it was about 15 minutes with the first one
and five minutes for the second one.
So let's jump back over into an overhead view,
load up those two pieces of footage,
and see if I get the same issues with them.
All right, so let's see if this issue repeats itself.
We have the iPad opened up to files.
We're gonna take our first piece of 4K footage
from the Lexar SD card.
Up it pops right here, and there it is.
So let's take, select,
and let's move it right into our
LumaFusion user media folder.
And now let's do the same for the Amplum SD card file.
All right, so we loaded this file
onto a video I'm already editing,
and it's right at the 17 minutes, 28 second mark.
And if we hit play, you can see it starts to play,
and you can hear the background noise
of me walking away from the camera.
All right, we're about a minute into it,
and as we come up on right here, same thing.
About a minute, 10, minute, 15 into it,
it cuts off into white noise.
All right, now onto the Amplum card.
I cleared out all the cache.
I started a fresh project.
I loaded that one piece of video on,
and as normal, when we start it,
it's running just fine, and you can hear me walking away.
And just like before, coming up to,
where was that one at?
One minute, 13 seconds, it freezes and goes to white noise.
So we've learned nothing has changed with iOS 13.
The Canon EOS R 4K video footage
still cannot be downloaded in a usable format
onto the iPad.
Now, the same workarounds still apply,
namely the WD My Passport
and the shipping out this week, GNARBOX 2.0,
which I'll be testing out once I get it
to see if we can get faster download speeds
than we got with either of the WD My Passports.
So if you found this video helpful,
will you please give it a thumbs up?
It really helps the YouTube algorithm
to start suggesting it to more people.
Also, I'd like to hear your comments below.
Have you had the same issue, or have you been successful?
Let us all know, and maybe there's a workaround
that someone's figured out that I just can't.
Until next time, thank you for watching.
