Weird Grinding Noise On A 2019 GMC Sierra - Brake Repair

My Brother Donnie
257 followers
416 Video Views·Jul 28, 2026
Well that got expensive!
AI Generated·May contain errors
Video Summary
AI GeneratedThe speaker diagnoses and repairs a roaring noise in a truck with 145,000 miles. After identifying a faulty wheel hub and worn brakes, the speaker replaces the hub, rotors, and pads on both sides. The video covers the diagnostic process, the high cost of modern parts, installation challenges, and the importance of proper brake bedding to prevent rotor warping.
Okay y'all I got 145,000 miles on the truck and over there didn't happen this time.
The front right corner of this truck when you hit the brakes and start coming to a stop pretty
quickly there's a roaring sound over there it's about like the tire is uh out around
type deal and it it don't do it if you brake normal but if you got to get on it and really
start braking on it it'll uh it'll start roaring so i think it's going to be the wheel bearing
you do a search on it it says it's going to be the rotor i mean the brakes but i don't believe
it's the brakes you can only hear it when you hit the brakes but i think it's intensifying that
that rotor i mean that bearing over there a wheel bearing and it's that wheel bearing is
about tore up is what i think is going on as soon as we get stopped by another light i'll
i'll put them on there pretty good where you guys can hear it hopefully and then we'll see
what's going on i'll tear it down and we'll see what it needs over there it needs brakes or if
needs a brakes and rotor or if it needs a wheel bearing here we go stoplight well didn't do it
didn't do it on that one i threw all my stuff out of back seat well i'll come back to the
when the next stoplight gets us well maybe this stoplight will get us we're getting up to a little
bit of speed here so we can hear it okay stay in the left two lane are these two
there's a red light up here i wonder if it's gonna stay red maybe maybe not ain't gonna stay
red but let's see and we're gonna tear this thing down in a minute and we'll see exactly what it is
hopefully y'all can hear that on the tv or whatever y'all watching it on so you'll know
what i'm talking about it's almost like a tire roar but i think it's a bearing i'm gonna pull
it out we're gonna look at that bearing hey y'all it always does it right up here where i turn left
so i figured i'll let you hear it one more time one mile turn left okay thank you siri so it always
does it up here where i turn it's been doing it for a couple weeks yesterday i had or day before
yesterday i had brand new tires put on the front and the front end of the line they checked
everything there's no play in anything i thought it was a tire roar because that tire on the
passenger side front was wore a little uneven so i thought it was going to be that i needed new tires
on the back so i just had to put the new ones on the back and rotate them to the front and do a
front end alignment just to be on the safe side and they did not find any play so turn left it's
gonna be that i'm gonna turn right here i'm gonna get on the brakes and we're gonna hear it
i don't know if you guys can hear it but it's it's like the uh in half a mile turn left it's
like the uh it's like a tire rope noise but something else and you know if it's the brakes
the brakes go and you can feel it in the pedal this one you can't feel it in the pedal it's just
it's just that uh it's a roaring noise i don't i think it's gonna be
that so we'll see it's definitely passenger side front whatever it is
i spot 200 rags and they're supposed to be in that bucket they're not in that bucket
they're not in my toolbox let me look down here nope not there obviously the place they're not
so get back to this done with my rant here the brakes are wore out there
there there's that one's not totally the rotor don't look bad
there's the rotor still too hot to touch it's got a little bit of a lip on it but nothing horrible
here's the brake hub i mean the wheel hub i think that thing should spin a lot easier than what it's
spinning you see there me pushing on it trying to get it to spin it won't spin i'm pretty sure this
thing is supposed to basically free roll i can't maybe if i lock it in there yeah there you go
it will turn but it catches so i think my hub's bad i'm gonna replace the hub
the rotor and the brakes all at one time here there it is i got it all off um that's for the
wheels or the tire that's for the tire 19 took my brakes off and that brake hub there or the caliper
and that caliper mount it was a 15 to take the hub off um yeah to take the hub off
some little problem should be three hub bolts laying right there there ain't maybe they're
still in it yep they're still in the hood and three bolts there um just to let y'all know how
hot it is out here we're gonna go over here this truck has got a temperature gauge on it
now the truck's still cool on the inside because i ain't been here more than 20 minutes
okay see what it tells us we might turn the radio down so we don't get knocked for it
94 degrees is what it's saying sitting here and like i say it's still cool inside here
like the inside temperature of this truck is whatever that says in the 90s but it's only
been sitting here 15 20 minutes it's a lot cooler in here than it is out there in the sun
so i bet you it's 100 degrees something close to that um yeah so hot in the direct sunlight
that thing up here is making it hot so we got to go to the store and try to find some parts pieces
and then uh we'll get back with you i do have a fan going so i need a hub brakes and brake rotor
for this side the other side i'm gonna need a brake rotor and brakes and you can't just change
one rotor so you got to change both rotors and uh all four pads so we'll get that at the store
and we'll be back shortly this truck sitting over here in this the shade hadn't been drove
says it's 100 so one or the other it's hot real hot 100 degree it's probably 100 all right let
me uh i'm gonna keep working here okay y'all i just uh had a out-of-body experience at the
store here so this little bad boy here but it don't want to turn here we go this one's turning
good it's got the new that's a uh that's the uh abs tells you the wheels locked up basically
that's what that is so i got a new one of them my rotor i need a new rotor i got a new rotor
brake shoes that's how thick they're supposed to be
go back you'll see that the other one was paper thin so got no brakes one two three i got the
full set of brakes obviously i got two rotors the other rotors sitting there look at this
you want to have a heart attack hub assembly five year pre-replacement
four hundred and fifty two dollars i about fell over each of these rotors i bought two of them
okay 152 the pads 100 bucks now i covered up i used my company i worked for i used their
their name their numbers and also i get their discount so i covered up their name and all
that good stuff i did get a little off of that but not much um you know that's
500 for a brake job for this truck which is absurd i ain't never ever brake shoes
usually 30 bucks 35 bucks i didn't even get the best ones i've got the gold you know they're
usually in the 30s the uh the brake the rotors are usually in the 50s 40s to 50 dollar range
the hubs are usually 100 bucks not on this truck so we got it all we're going to put it back in
goes together pretty easy slam the hub in first it just goes in there you tighten up the three
bolts they're uh 15 millimeter i'm i got this little stubby impact i use it all the time
i'm gonna tighten them up with that then uh you saw i had this big wrench out that was to get on
my ratchet tighten it on up a little more put that on and then you're home free you got to put your
your brake drum on or your brake rotor on and then you put your caliper on or your
rotor hold down piece and then you uh slap your brake brake shoes in it there's one problem though
i need to compress that uh that caliper and i don't have a c-clamp here or a pusher you know
they say you can use these i think i'm gonna try it and see if a caulk gun will actually push it in
i tried it once before and it would not i'd much rather have a c-clamp but i don't believe
i have a c-clamp i've got one at the building but i don't think i got one here
um got a lawnmower this week so we'll have to figure out how we're gonna do that i'm gonna
put the hub on there get it locked on and uh get the rotor on there and uh get that other bracket
on there and then i'll figure out that that somehow we'll figure it out ain't nothing but a
thing so we'll make it happen all right i'll see you in a minute okay y'all i got the hub in there
this thing goes up here and locks in locks in there oh that's gonna make y'all dizzy that one
goes right here and locks in okay that little thing is pushing in it locks okay this one
i guess i was supposed to take it loose but anyway that up there it goes up there
um the little you can see the little nipple it goes up push that together
and it locks well it's supposed to that's supposed to lock in then you push that in there boom boom
and you're done okay i got to get this off to get that into there get it all together
okay y'all we had to fight a little bit but we got it got it in there got it locked
um you push the little red lever back and it'll lock it um i'm gonna put this back up here
like so take the rotor do the rotor it's hard to do one-handed
i'm gonna smash my fingers okay y'all gonna have to go away there ain't no other way to do this
i go in there i'm gonna smash my hand like that huh okay i'm gonna basically you put the
rotor on there then this piece goes in these two bolt holes that holds your rotor i mean that holds
your caliper and your brake shoes put your two brake shoes in there boom you're done um put your
caliper back on top caliper bolts in there okay so that's what we're doing now off camera i guess
because i can't figure out how to do it on camera okay y'all one of these say outer one of them
says inner the inner has got the squeakers on i broke on the back side of these there's these
little pieces yeah there's that little piece there it's basically your spring that pushes
your pad back out i broke it off so uh i went ahead and replaced these i hardly ever replace
but since i broke it i replaced it um they come with the pads i hardly ever change them out
just i don't know i just don't so now we got to figure out how to compress this back in
um normally you put your brake pad in there your old brake pad you just push it back ain't no
problem but i don't have if you got a c-clamp you can go here and you can go here with your old pad
and just push it right back take you 30 seconds if you got a c-clamp but i'm gonna try i mean i've
got some wooden c-clamps but they're just so big and gawky i don't think they'll get in there i got
some of these but i don't think i can get them in there i need a metal c-clamp i don't think i
got one i think they're all in jefferson let me look around here for a few and uh see if i can
come up with one if i can come up with one we'll do use that if not i'm gonna try to use these
things but like i said i tried this last time and it didn't work i found it with another one i
actually broke it because i was pulling so hard on it but uh let me see what i can find and i'll get
back with you okay y'all that's how it should look when it's done it's basically you got a boat here
okay and you got a boat there that caliper comes off what i always do is stick a screwdriver in
there pry forward that will push your caliper back a lot of the way you got a boat here you
got a boat here break them loose stick a screwdriver in here and pry that will push your caliper back a
lot of the way back the way you need it i did end up using those that blue one actually worked
believe it or not that other one did not see how that other one they end up bent that's the same
thing that happened the last time i done it so it bent sideways these are cheap pieces but obviously
it was used for something that's not intended so i can't i can't uh complain too much it looks like
it just bent it back though yeah it just straightened itself so anyway this old blue one
this thing is old this did it non-stop no problem but the way this is designed in here is different
so it keeps pressure on it the whole time where that other one does not that other one just keeps
pressure on it as you're pushing so it they work that's all that matters i got it tightened at you
take these two off this comes off you push them two pistons there's two pistons there you push
them back and that gives you room to put your new brake pads so basically your brake pads wear to
nothing and when they wear to nothing you have to put two inches in there basically about an inch on
each side of brake pad so you got to push them pistons back now if you just filled up the brake
fluid last week and you push those pistons back obviously you're going to have brake fluid come
out of it everybody gets all scared when brake fluid starts coming out over there it's no big
deal you just you had too much brake fluid when you compress those back so if you do this you
might have some brake fluid come out it's no big deal if it does oh well it's fine um now all i
got to do is put the wheel back on and when you get done doing this you got to get inside and pump
the brakes you got to pump them till you feel brakes when you first push the brakes down it
won't have nothing because it's bringing up that slack it's bringing that fluid back down here
and pushing up to where you'll have pressure on them brakes so we got to do that another thing
when you put new rotors and pads on it drive it easy don't go out there and slam on the brakes
don't get them real hot don't sit there and hold your foot on them for a while
you want to go easy does it for the first say 100 miles or so or the first 30 stops something like
that and that will set all that stuff in and keep it from warping if you go down there and you just
hammer on the hammer on the brakes you'll overheat one spot in the rotor and it'll warp it and you'll
your $100 a piece or 100 whatever it was $118 a piece um $129 whatever it was you'll waste that
because you'll have to buy new ones now they used to turn rotors back in the early 90s late 80s
early 90s everybody turned the rotor because rotors were so expensive it got down to like it
was five or six bucks to turn them and the rotors was like 100 bucks back then so everybody's like
hell no we're turning them but now then they got down to where the rotors was 20-25 dollars and
everybody's like well it ain't worth waiting taking them to the store getting them turned
bringing them back so but now they're back up over a hundred dollars they're going to start
turning rotors again probably and you see them turners on the internet all the time for nothing
so i might buy me a turner where i can turn my own rotors that jack is not touching the ground on
this side so i've been making sure i don't put my feet nowhere around in case this thing falls
i got to go back over there and turn the wheel straight so i can get the tire back on
once i get the tire on it will be good and then we've got to go do the other side we're not going
to put a hub on the other side we're just going to put the rotor and the brakes on there so it
should go a lot faster it's still 100 degrees out here and probably a little more than that
so do i got the keys for this truck on me yes i do it'll tell us when we get inside what it is now
it's hotter it's locked let's get inside this thing is it's getting warm now let's see what it
says 100 degrees 101 somewhere around 100 easy so i don't knock it off the thing yesterday it was
i think saying 105 106 pretty hot sitting out here um i don't know if it's quite that hot but
it's uh it's pretty hot and i've got the air conditioner coming on in here it says 107 that's
probably a little hot a little high it's probably more like 100 102 or something like that but
we'll see we still got another hour before the hottest part of the day
but let me go see if i can get that tire on and get this other one off
okay y'all i'm gonna put you guys over here let y'all watch and knock it out
okay y'all that was real time less than five minutes change the rotor and both
brake shoes or pads whatever you want to call it and i replaced the little metal pieces
so five minutes five minutes aside it's 10 minutes and i was in the shop the other day
trying to get this front end aligned and they was charging 440 dollars for putting pads and rotors
on which is absolutely absurd about four times what it used to be they used to say 99 dollars
per axle and they do the brake shoes and the rotors but turn the rotors now evidently 440
aside y'all if you like what you see give us a thumbs up for filming and subscribe to the channel
if you hadn't already and we'll catch you on the next one okay y'all coming up to a stop here
we're just gonna stop it that fix no sound whatsoever so should be good thank y'all
