Turned a Drawing into a Real Car! | Full Custom Garage | 4K

Tech Care
3 followers
Sep 17, 2026
AI Generated·May contain errors
Video Summary
AI GeneratedCustom car builder Ian Roussel transforms a whimsical cartoon drawing by artist Johnny Jalopy into a real-life \"rat bus.\" By combining a shortened VW body, an AMC Rambler engine, and a custom-built chassis, Ian overcomes severe structural and mechanical hurdles to translate exaggerated 2D proportions into a functional, high-quality custom show car.
Right now on full custom garage master metal man Ian Roussel tries to turn a wild cartoon drawing into automotive reality
I like having clients that are all on board. You know, they think I can accomplish anything
Why not just give him the stuff and let him go. He's got this clown car
And a bunch of used parts, so it's got a long way to go, baby
I think the only person that can pull it off is Ian, but when things go wrong
See already we're off. Ian's client is halfway around the world
It would be easy to just stack parts
I'm trying to make it look like the drawing
Everything's getting changed. As Ian takes the project to the next level, this could be his biggest challenge yet. Going into this bold-faced and fearless
My friend Mark, he's a great client. I've done a bunch of projects with him. Last project Mark brought down was a Henry J
He says he's got something newer and wilder than anything we've tried so far
You know, I'm very fortunate to be one of Ian's clientele
I like Ian just to let his creativity take over the project because the more radical it becomes
The better it is. I love your weather down here, man
This is gorgeous. He came down from Canada and he's into the wild stuff
Definitely not into the restoration aspect of things and that's right up my alley
I can show you this before we actually show you the
the project-to-be
Originally this whole idea came about by a drawing and he's the only one that I can think of that could actually pull this
One off. He said it was a Volkswagen. It's a Volkswagen
Shows me this drawing of this pretty wild cartoon hot rod. I'm all on board
So it's like a front-engine Volkswagen bus hot rod thing. Just like the Ed Roth monster cars
This is right in that vein. It's just a new style on it and I think pushing it forward is always really cool
Well, I was excited to see what Mark had in the trailer. This isn't like the last thing I brought you
It's in a little more disrepair
The mighty short Volkswagen you got there
It was not what I expected
Here come the clowns
Must have been a rare factory option
Mark pulls out this shortened VW bus and just a ton of other random parts from the trailer
The drivetrain on this thing is it's out of a 1965 AMC Rambler, you know, very unique
You know, you don't find them anywhere a fine piece of machinery
This engine looks pretty rough, but Mark says it's a runner. I don't mind seeing a crusty old engine
It's all about what's happening inside. I know we can clean and paint it
Somebody stepped the chassis down pretty good
This came off a 34 Plymouth rat rod that I had bought
So I thought well, let's throw AMC running gear in a Plymouth frame
And then now we're gonna put a Volkswagen body on it. You know, let's mix up all of them
I like having clients that are all on board. You know, they think I could accomplish anything
Unfortunately for me the anything gets wilder and wilder
The big challenge is to make it look like the drawing the stuff Marks pulled out of the truck
Looks nothing like what we're going for. Oh
Yeah, that's gonna be awesome
It's gonna be a one-off
I have my own ideas of the way this thing is kind of gonna look to me. It's kind of rat radish
I said Ian let's make this rat bus
Mark's talking about rat rod. He wants something kind of easy to build, you know
I'm looking at this drawing and I'm seeing full custom show car like all the way
My time frame is kind of short. I'm kind of rushed out here to drop this off
This is just a quick pit stop for Mark. He's heading back up north. So I got free reign to make this thing happen
That's the excitement didn't Forrest Gump say it's you get a box of chocolates. You never know what you're gonna get
Well, that's kind of love way it is with me and Ian
The cool factor about this setup is it's a complete bolt-together rolling chassis. I just assemble it and move on to the good stuff. I
Want to bolt this chassis together and then set the body in place and see where I got a cut
Hopefully this thing is square. I'm gonna have to measure off a bunch of stuff. But the good point is there are motor mounts
There are suspension mounts
Already I could see this whole
Frame is bent
You can see this angle here
It comes into the motor mount. It's pretty close to square
That one's way out
When you run into a crooked frame, that's your base of the whole
Driving component of the vehicle. So this thing's gonna want to drive off the road if you let go of the steering wheel
That's probably why it was scrapped that turns my whole world around. I'm back to the beginning
Typical basket case, that's what I specialize in. So this frame is gonna need some kind of modification
Seeing that this has been it's always an indicator of something else. That's gone wrong
I'm just gonna bolt it all together get it rolling and just see where we're at double-check everything we've got
That's a roller. I was really looking forward to just doing the creative aesthetic portion of this build
After the situation with the chassis revealed itself, it's like I got a start from scratch
I'm gonna cut this chassis up man. It's the only way around it
So we're on to plan B the frame is bent
My idea is to use the existing components in the chassis
Fit them up around this engine in a proportion that looks most like the drawing
Lark says this engine has been sitting for a while and a typical statement of man great when it was parked
Turns over it's not seized
I'll clean this engine up later. I want to get it in place and mock the whole car up around this engine. I
Learned this technique when I was five years old playing blocks
Same process
I got an A-plus in that course, by the way, I cut up this van for a project
I just finished we only used the chassis and the mechanical components. I cut the whole rig in half
While I was doing that I was thinking ahead to this and I saved all the sheet metal parts. We're gonna use for this one
So I'm just down to pieces of sheet metal, which is a great starting point. I
Don't know how much of it I'm gonna use and that's why I got to mock it up
So according to our schematic, there's a large hole
Burrowed straight through the center of the donor vehicle and then was inserted up to the valve covers on the engine
Let's try that
I'm always really excited about a project for the first few days because that's when all the inspired stuff happens
the fun part is just the
Possibilities of it, you know at this point, it's just a blank canvas and I can go in any direction
I want that's really the spice of the whole project is figuring out what you're gonna do
This drawing is done by an artist named Johnny jalopy. It does a lot of really far-out car illustrations that exaggerate reality
So my challenge is to take these proportions and the flavor of his drawing and transfer it into three-dimensional steel
The whole thing in starting off is just getting the parts physically on the floor. See what their dimensions are
I have a feeling this project is gonna be all about proportion and there's nothing resembling typical car
Proportions that I could see so far
See already we're off
See, this is showing a short wheelbase
the tire
Intersecting the corner of that door
You see the tire should be as tall as that handle
Come way forward
Mark brought this set of white wall tires a
Tall skinny white wall would be the best option and they're just really hard to find
Mark has these two and I'm gonna try to make them work
What I'm trying to do is make this tire look as big as possible
And the only way I'm gonna get that is making that body smaller
Parent this whole thing. It's got way more involved
first considered
By looking at the drawing I can tell that the nose doesn't look anything like it
The doors are way out of proportion. The a pillars are wrong. The roof is wrong
So really all I'm seeing using as a starting point is like a bare skeleton
I'm gonna cut it long ways short ways sideways up ways and down ways
Well, the whole thing with this chassis is it's set up as like a t-bucket hot rod, you know
It's a short wheelbase big engine big tires. That's the look
My challenge is to take this utility vehicle and somehow morph it into this cool hot rod shape
If you ever sat in an early model pickup truck 34 Ford for instance their miniature
So this is just getting closer to those proportions. I
Basically just need to shorten the door by a foot any moving part. Once you start sectioning it starts to get a little
Sketchy, I chose to leave all the latching mechanisms and the hinge mechanism in place
That way I had a three-point reference two hinges and one latch by leaving all the factory components in place
It's just a huge time-saver. All I did was cut through the sheet metal put it back together
Think I'm on to something
It's looking good. I
Like the proportions of the lower half of the body
But there's really no other way to go about this other than to recreate an entire new top of the car
We're not out of the woods yet, man. This is a good start
Before I get carried away with the body design
I need to build a chassis to support it in order to get this frame squared up
I put it up on the table cut it apart. I
Got it all squared up jigged it on the table started from the front and just connected it all the way through
Using the dimensions from the mock-up I moved the engine and the suspension brackets just to get them as far forward as possible. I
Wanted this thing to be low
So I zeed the chassis and set it up to be super strong
In order to achieve this really short wheelbase. I took the driveshaft to a machine shop had it splined 22 inches shorter
With the chassis done. I'm finally where I want to be so I can focus more on the creative part of the build
I'm gonna put this body on and see what's up
What do you think hell hound?
Do you have anything to say?
huh, I
Was looking at only portions of the drawing and I think I got those details nailed
The next step is to figure out exactly how long the rear of the beds gonna be
So I'm gonna bring in the two quarter panels and mock those up
Wait a second
This quarter panels in really bad shape
Look at all this body filler. You start cutting into old stuff and you see everybody else's modifications and repairs
the old bondo bucket
The thing it's all delaminated
But this is an old repair
Somebody in their grand wisdom decided to rivet the panel back together
After either rust or collision and then use the metallized filler
in place of a proper welding job, so this whole
You're pulling the paint off of a project seeing what's beneath, you know, there's gonna be body filler. It's typical old car stuff
It's really a bummer when you see rivets
Cancer really bad body panels. So this is a pretty big curveball the driver's side turned out to be really good
There's a little filler through here, but this one was never creamed that's totally usable the plot thickens
I'm gonna put this good quarter panel on and see how it looks
It's all about moving forward
Take that to the bank
I'm looking at that and I'm looking at that and I'm very happy with it
His picture shows the bed being a little bit bigger, but I think this
Nails it the shorter bed makes the wheel look bigger and that's a win
The remedy here is to build the vehicle with this nasty quarter panel. The last thing is to place it
The drawing only shows one angle of the car. There's a lot of design elements that I got to come up with
There's a VW show coming up in town and I want to get some inspiration
I've been living, you know out in the clouds
I want to come down to earth see what people are doing with their cars and it's pretty darn conservative
So I see all of these single cab and double cab VW pickups
That's exactly what this drawing was based on so it's good to check them out in three dimensions
the early split window VW's have that unique V shape in the nose and then of course the split flat glass windshield
The one we're using is a later model. It has a curved glass windshield
I could see how you would short step this whole process by using one of these early models
I don't really like to take a nice early car and chop it up
I'm all about taking spare parts make it something cool a resurrection if you will
My task here is to use the parts
I have make it look more like the older VW's and of course as much like the drawing as possible
I think I can make it happen
Trying to move this thing along I pulled the engine out and took the body off the chassis
My friend Jackie's an artist and she's gonna help me paint this engine
Everything's looking good. She's got the first coat of red going on, but I knew there was a couple things
I didn't want brush painted. All right, captain. I got a plan
We're gonna paint the valve covers black and then the whole chassis is gonna be the same thing spray can black
I think the red looks great on the engine block
I think if we paint these valve covers black and then detail out the rest it should be good. So
Yeah, it's trouble I'm thinking I'm gonna take these valve covers off so I can spray paint them and
Underneath was just a disaster
That looks awesome. What's going on in there? There's some kind of stalactites in there. There's all kinds of corrosion
I don't know where this engine has been but it looks like it was underwater. So we're gonna have to clean it all out
I don't know what we're gonna have to do. This could be toast. What is this?
Pure gunk you always know you're gonna hit walls
There's hurdles to overcome but pulling these valve covers off and seeing this massive blob of corrosion
It like takes the wind out of your sails. I'm gonna talk to mark
Let me take a couple pictures of this
Because he's gonna be interested to see
Mark's whole gig from the start was using the existing parts
The entire chassis is built to support this driveline. So this engine we were committed to
Said it ran great when he parked it
Everybody says that this does not speak towards that event. When did he park it?
He parked it in
1959 the year before they assembled it. My design is reliant upon this engine
So I got to talk to mark and see what his game plan is
Just keep coloring it. At least it'll look nice
Sitting in the corner if I don't kick a hole in the freaking door mark is in Afghanistan
It's hard to get a hold of them. So we use text messaging pretty regularly
Yeah, mark is in agreement. He writes
Dang, that looks very bad. He only has access to the computer at certain times
So I'm gonna set up with Skype Paul with him for later. It's all about moving forward
You know, it's kind of a bummer but there's plenty of more creative work to do
All right. So today's adventure
That does not look like that. So I'm going to make it. How's that sound?
The drawing shows an earlier split window. You've got a later bay window bus
I want to make this look just like the drawing so I have to build a whole new windshield frame and dashboard. I
Just took two pieces of sheet metal put them in the brake and created this flange that the window glass will attach to via a rubber
gasket
Next I made some cardboard templates that'll represent the glass
Then I built the top and center of the frame
The roof on the drawing is a super unique shape and I'm trying to figure out how to make that happen
Now that the VW car show I was looking at a bug roof from the back and it just gave me an idea
I have one of these domes and it's just way more pronounced than the bus roof
If you really look at the beetle, you'll see that towards the windshield it flattens out. It's the most curvy right above the back window
So I cut the rear portion of the roof off and stuck it on here backwards and it worked perfect
What's not to like about that?
That's that's it
See his drawing has a really nose down attitude
You don't even care this is a breakthrough it's a moment
The roof still needs a lot of work, but just to get this dome and put it in place is a big breakthrough
That's the proportion
I'm using this round tube to create the front of the visor on the roof
And this is going to represent a drip rail all the way around the perimeter
Just slapping a piece of sheet metal on looks pretty loose ragged. So this gives the sheet metal a definite formed edge
No sharp metal nice rounded edge and it's strong
Now that I see this I am genuinely impressed this looks great
Pretty committed to replicating the drawing as close as possible. But in working with these metal shapes
I think it's given this windshield area even cooler. Look, this is just a little more radical
You got some really cool dimension as compared to this. It almost looks flat
It's nice to end the day on a positive note
I'm going to talk to Mark about the engine situation tomorrow if we can't find another engine and this could really set us back.
I got the whole front windshield
Established the next big challenge is the rear portion of the cab. The drawing doesn't really show what's going on back here
So I'm leaving that open to my interpretation
I got a cool idea where I'm going to utilize the rear tailgate of the van and
Split it in half and make two. The portion with the rear window will be back here
And then the lower portion with this detail of the body sheet metal will stay here
Being that the cab is so much narrower the whole rear window frame and the rear hatch have to be reconfigured
Be nice to just cut it in half and put it in place, but all the proportions are changed
Taking all the leftover pieces of car and just refitting them in a way that the hinge mechanism will work and the rear hatch will
Open and close smoothly. It's just way smaller
So you want to ride this thing, don't you? I know I do. That opens, you got your breeze
Room to cruise man. It's gonna totally work. So the second part of this is the lower hatch
I'm gonna leave the center. It's twice as much welding. Put both sides inward
This is gonna be a tough one to let go
This is coming out cool. Look at it. It's a miniature Volkswagen. It's tiny. It's great
Even though we're making progress on this thing. I can't get this engine dilemma out of my head
It's finally time to talk to Mark and figure this whole thing out
Hey, man, how's it going?
It's amazing modern technology, I got that picture you sent me
Yesterday and holy. I apologize for that engine Ian. I didn't have any idea. It was that bad. It happens
I've been researching that engine and I guess AMC they don't make a lot of them, but they don't make a lot of parts for
They're like hen's teeth. You can't find nothing for it. I'll find you another engine because that whole enclosed drivetrain
That was my big
It's absolutely critical to get the same engine and transmission because it couples to this rear end
There's a enclosed drive shaft splines are a certain pitch
And of course the engine and transmission mount is already in place
It's not as simple as just swapping out the engine unless we find another AMC
Yeah, no, I hear you. No, I don't want you to change what you've already done
You've got way too much work in time into the way. It looks right now. It looks awesome
so I'll get a hold of my boys back up in Canada and
We'll just start a search you just leave the engine in my hands and
Hopefully I'll get a home run for you. All right, cool after talking with Mark
I was glad to hear that he'll get a duplicate or replacement engine. I should just carry on and that's good news for me
Before I finish up the roof, I just wanted to wrap up a couple loose ends on the body
The rear quarter on this van was toast. It was really rotten. It was buckled in there was no other way around it
But to replace it
The interior of this cab is so small. I'm just trying to add as much room
For a person to drive it. I wanted to get a good solid structure created before I finished off the top pillars
So just having everything here rigid is what I needed to set up so nothing changes shape
But the structure of a lower portion of the cab in place now I could finish the roof off
The roof is a pretty complex shape and I think this will be the most challenging part of the whole build
So I'm gonna lead off this
restructuring of it by creating the door tops
the whole idea here is
Creating a nice clean door gap straight through as well as adding support
In the end, this is all about the exterior. Look at the thing
You just got to look kind of like a production car. So I'm gonna have to come in with a
triangulated patch
To create that radius evenly to the drip rail through here somewhere
Just like with the rest of the project. I've got my blinders on, you know
I'm working through one portion at a time
Nailing that and moving on so I get this drip edge finished and realized the part I wasn't looking at is this internal bracing
The location of this rear arch is just all wrong. You know, his drawing is pretty slick
I'm just trying to keep that vibe and bring it all the way around to the parts. You don't see in the drawing
Putting this bug group on backwards nailed it
It looks just like the drawing but I want to make sure that the slope curves gracefully down into the rear of the cab
I don't think that thing's doing anything. I think I can saw all that right off
Famous last words
If I set this up with a big tall 90 degree rear panel, it's just gonna look weird
It's about being efficient at this point
I could always cut way too much and patch back in
Just trying to make one join one seam across the top of the roof
And I think it's time for the old envisioning tool
Critical elements and every build is the envisioning tool
I don't know who else uses one of these but I've got a number of them to get this roof, right?
I'm gonna have to just focus you see anything could happen with this roof line. So that's coming up like that. I
Got my two marks. Yeah, see that's kind of
Baseball hat style right there. The whole purpose with this technique is to just see how the roofline is gonna flow out
With the original structure in place it was gonna look like a big hunchback
What I'm trying to do is just take this curve and make it flow gracefully right into the visor over the windshield
the whole thing about this roof and my
Enjoyment of it. I guess you could say is just that I'm trying to figure it out as I go along no
Preconceptions just letting the metal tell me where to go. I thought I was gonna use this piece of the old van roof, but
It was a much
A lot less of a radius than I had anticipated see they put this little ridge and then the roof really just flattened out
I need to carry that up
All the way to here. I was gonna make one
So the rear portion of the roof is gonna be scratch built
I'm gonna use the slip roller set it up with a curve just kind of hand form it into shape and weld it on
It's gonna work
So the tie together the whole rear of the roof was the same story as the front just a piece of round tube
Just made two corners and then a center section each time. I join the tube
I'm putting a little sleeve inside this helps you line everything up tack it in place and just move around the perimeter of the roof
This roof's got to be symmetrical. So I'm just starting with the center portion to get that arch going over the top
The left and right quarters are gonna have to be made independently
It's a really complex shape on each side and keeping them symmetrical is the goal
This is like a giant puzzle, you know
And you don't realize what the puzzle looks like until the pieces are mostly into place and you still got some loose holes to fill in
Sometimes my dyslexia comes into play pretty well
These rear quarters are pretty complex
I'm thinking it's gonna be the easiest way is just create a series of triangular shapes
Pack them together and then hammer and dolly and into shape
So this metalwork looks pretty raw it's got a lot of welds that's just characteristic of this fast paced work I'm doing
Yeah, actually from this view. That's the drawing. It's got totally got the feel of it. The thing that did it was the
raking of that
Drip rail, but no car does that only a drawing does that you can see he's showing a really high crown over the whole thing
I thought I was losing it in the rear area and it did come down a bit
But it's still pretty hyper exaggerated
Getting the roof figured out was a big hurdle a big success, but I really want to get this engine figured out
I'm gonna get on another Skype call with Mark and figure this out
Hey, man, how's it going?
Yeah
Right on
I'm out of here tomorrow. So my plan is to get home get this thing loaded and I'm driving it down to you
And we're gonna put it in this buggy together. That's great. The sooner I can get it down to you
The sooner I can bring this thing home. I'd like to bring
The van home with me because otherwise I'm just coming back with an empty trailer, but I'm there to help you buddy
So whatever it's gonna take but I'd really like to bring this thing home. Okay
What's your time frame
Okay, how long you stay in six months I
Don't know I'm still
Okay, oh
I could do anything. Yeah. Sure. I thought I was making good progress on this
But Mark tells me he's gonna be here in a week and he wants to take it home with him
I got a lot to do to wrap this thing up and only a little time to do it
Even though the fabrication is not a hundred percent finished
I needed to get this filler on here compare it to the drawing and just see where they're at
Just getting this thing skinned out so that it has its final appearance is a huge hurdle
I have to get finished with the last few elements of fabrication
Firstly being the dashboard. I slept with this under my pillow last night and
I thought that I saw something in the dashboard
The drawing isn't very revealing on what the interior of the thing looks like
But I see this little bulge in the line of the dashboard. So I just want to incorporate that element
I'm all about just making things go quickly. So instead of forming something to be the dashboard
I had a pile of stuff and I think I could find what I need in there. I
Just need to get away from this bodywork for a while. So instead of standing here in the same spot
I'm gonna move over 10 feet dig a hole under the table
Something like that
This is a piece of a semi truck exhaust. I'm thinking the dashboard is gonna be a semicircle
So any tubular shape it could be a muffler could be an exhaust pipe
Who knows that I got tons of round metal shapes and if I can find one I can cut apart
I just put it back together. I think this tube will be perfect for the dashboard
As long as it's long enough I can split in half
The idea is cut this thing in half then I have twice the linear footage
Mock it up in the body and see where I need to splice it
The whole idea here is simplicity
It's just gonna be a rounded shape for the dashboard and then an element in the center that represents that curve in the drawing
This looks kind of cool, but I think just look better with a larger diameter
Just make a pretty good dog bowl, huh?
single serving
Muzzle, come on, muzzle
Want some water?
Thirsty?
Come on
Went to fill the dogs water bowl and I had an epiphany
Wait a second. I
Was all set to mock up one of those other shapes on the dashboard
And it just occurred to me that I was filling up the perfect thing to go on the dashboard. I
Think we're just gonna trade out somebody's water bowl
Here you go. Drink up
Look at that
That is a shape
Stainless steel
Need this? I didn't think so
Right away I can tell this dog is attached
He's had his face in this bowl since he was born. So there's a level of attachment. I'm gonna have to break it
This is being repurposed. It's just part of what we do here. I
Know it's your favorite accessory, but look at that
You have that look of detachment in your eyes. It's time to grow up
It's time for a next chapter in his development. I can put some kind of a gauge right here on this face
This is gonna be painted and finished like the rest of the car. I'm just looking for the right shape
Don't look so concerned man. I'll get you another one
As soon as I put a weld on this thing, you know, the aroma was coming out
He could smell his saliva just roasting and I could tell he knew something was up, you know
I'd have to taper him off talk him down, but he came through. All right
The dashboard is a really cool element and I just wanted to look finished
Had these other little shapes that were for some water filter project. They're just little domes
I spliced them into the end of the dashboard and it just finishes it off instead of seeing a rough sheet metal edge
It's a nice curved element
This is a pretty minor detail, but you need a dashboard
I need somewhere to put this set of gauges mark gave me and I want it to look like the drawing
Up to this point
I've been working from a line drawing and that's really helped with the building of the structure of this
Johnny sense of color picture
He's got this really vibrant kind of toy racecar feel
To see a colored in rendering of what the whole thing's supposed to look like that gives me an idea of the finish
I got this cruise night blue
Metallic from Eastwood and I added some blue metal flake on top of it
I want to finish the dashboard and paint it first just to see how it looks
This dashboard is just a one hurdle along the way this is a marathon
Seeing the color rendering of the car really made me want to make this paint job. Nice
The whole idea with a finished paint job is that it's mirror straight the easiest spots to pick out are your long flat panels
Second thing is all your edges is just trying to get these lines razor straight
This portion of the process is really something that I've been fixated on
Because it's it takes the metal work to the whole next level
You can do great metal work and everything but it's always gonna need this type of finish the better
Metal work you do the less filler you're gonna need. I
Got this 3m platinum plus body filler and it lays out like nothing I've ever used. It's totally smooth
There's no air bubbles in it and it sands really easy
Once I got the body work done I was ready to move on to paint it an effort to stay true to the drawing
I had a guy who does stickers scan this into his machine and
cut him out on his
vinyl sticker cutter finger
The whole thing with this project is proportion
If I just stuck a generic number five on the side, it wouldn't look like the drawing
So just like the rest of it
I'm gonna try to tailor this graphic on the door that it fits the
Proportion of the vehicle and I think that's just gonna nail it
I'm gonna use this template and make a stencil to paint the graphic on the car
It's basically a three color design. So I need to mask it off for that
I've been talking back and forth at Johnny all throughout the progress of this when he sent me the color
Drawing of this thing. I could tell he's really pumped. I could never imagine
anybody
Taking a drawing of mine and building it in real life. Of course, it's a dream
You know, those are the things you hear of the legends have did that stuff, you know the Ross the Barris
You know guys like that. Those are guys that took creation from from a paper and made him a moving machine
that turned into these
Entities on their own when I first heard about it
one of my friends on Facebook had messaged me that he saw on Ian's page a
Post with a picture of my drawing saying you got to give the people what they want. I
Said hey, we're gonna build this thing. What do you think? And at that moment? I was like really are you kidding me?
Cheesy to say a dream come true kind of thing, but you know it is
I'm glad that Johnny's on board super excited. It makes me really want to do this thing
Right get all the details in order with the metal work
You're creeping up on an end result, but the paintwork you don't realize that until you peel back the wrapper
The whole thing with paintwork is it's all set up time
Just like with the block sanding this graphic takes a ton of time to lay out with the tape work
You don't realize the reward until you peel back the tape. So it's all prep in any paint job
That looks great. The five is definitely bigger than the original one and it looks like the drawing
I'm stoked getting this tape peeled back
I could see that all the work I did with the razor blade and
Fastening the tape to the door came out with a really good result
Yeah, look at that
Looks like a giant cartoon
Seeing this thing come from just a pile of parts to where it's progressed to now
Makes me just want to keep on pushing make this thing into a full custom show car
on the next episode of full custom garage master metal man Ian Roussel continues the
Transformation of the cartoon hot rod he can make anything out of nothing back of the cab opens
It wasn't supposed to be like this
Our plan was here Ian takes it to here mark pulled the engine out. I could tell this dude is serious
but when things go wrong
My heart just sank
Ian's looking at me like you and with his client out of the game
Ian switches the lineup while Mark's gone. I really want to surprise him. I want to make some progress on his Henry J
I leave the guy for a day and a half and I come back and bam truly amazing with the team back together
It's all hands on deck mark is out of his mind. Johnny is totally charged up about this
There's sawdust everywhere. There's parts and pieces all over the place. We're in the trenches
