I Turned a Office PC into a Powerful Compact Gaming PC!

Tech Care
3 followers
Nov 14, 2026
AI Generated·May contain errors
This might be the craziest minigaming PC I've ever built.
With a dedicated GPU,
this little thing can even handle smooth gaming at 4K.
And the crazy part? I built
the whole thing using a cheap little office PC.
I even designed and 3D printed a custom case
to turn it into a proper gaming machine.
But getting everything to fit together took
a lot more planning than I expected.
So let me show you how I pulled it off.
The starting point
is a Lenovo ThinkStation P 320 Tiny.
As many PCs go, this is one of the most upgradeable options out there.
You can pick one up for around a hundred bucks.
That's the cheapest deal I could find,
though mine only came with a 65 watt power adapter.
I'll probably need something beefier.
Inside we've got quite a few upgrade options.
There's a connection for a 2.5 inch
SATA SSD, but I won't be using that so we can skip it.
Right underneath is a PCIe 8 lane slot.
That's where I'll hook up the graphics card later.
Flip the machine over and there's another
cover we can remove to get to the RAM.
Mine came with 8GB and a 256GB SSD.
But there's one thing I'm not impressed with.
The cooling. This heatsink is about as basic as it gets.
It's all aluminum and weighs just 77 grams.
With cooling this limited,
it makes sense that the machine comes with an i5-7500T.
That T means it's a power-saving model, rated at just 35 watts.
Still, I can already picture it struggling with modern games.
Before we start upgrading, let's see what this $100 PC can do.
Nothing too surprising for a T-Series CPU.
Four cores, four threads, and a power rating of just 35 watts.
Let's put it through a quick stress test.
After a few minutes, the temperature climbs pretty quickly,
then levels off at around 70 degrees Celsius.
And, true to its power-saving roots,
this 7500T is drawing less than 15 watts during the test.
Let's see if a game changes anything.
Whoa. Just a few minutes into Minecraft, the temperature shoots up.
We've only hit 70 degrees
Celsius, but something's already off.
The CPU clock speed keeps bouncing around and the frame
rate is miserable. I can barely play like this.
Intel lists a temperature limit of 80 degrees
Celsius for this E5 7500T.
Looks like I've been going a little too easy on it. Time to give it a
push and make it hold its maximum clock speed.
And there we go. It's still sitting at 70 degrees,
but the clock speed isn't dropping anymore.
Power draw stays under 25 watts too,
my electric bill will appreciate that.
So can I finally kick back and play without all the stuttering?
Not quite.
It's playable now, but that's about it.
This CPU really wasn't built for gaming.
I'm gonna need something with a little more muscle.
Something like this i7-7700.
It's the most powerful CPU officially supported
by this Lenovo P320 Tiny.
But after taking a closer look, the i7-6700 makes a lot more sense.
They've got the same core and thread counts,
power rating, and cache size.
The 7700 clocks a little higher,
which you'd expect from the newer chip,
but the 6700 costs nearly half as much.
That makes the choice pretty easy. It's a
better bang for the buck.
Let's drop it in and see how
much of a difference it makes.
Before I turn it on, I need to swap out the power adapter.
The current one's only rated for 65 watts,
and the CPU alone can use that much.
This replacement gives us 135 watts.
That should leave enough power for the whole system,
even with the CPU under full load.
Oh, we've picked up a few frames,
but we're still nowhere near where I want to be.
Look at the CPU and integrated graphics usage.
We've got a stronger CPU now, but in this test,
the integrated graphics are pretty much
maxed out.
That's a major bottleneck.
If I want more FPS, I'm gonna need a dedicated graphics card.
Huh? Hold on. Is it getting a little hot in here?
I look away for a minute and the temperature shoots up.
What? 96 degrees Celsius? Yep, I'm reading that right. That's insane.
And the cooling fan sounds like a jet engine trying to take off.
So we've got two problems to fix. Graphics and cooling.
Let's start with the graphics.
Remember that PCIe 8-lane slot inside this Lenovo Tiny?
Unlike a laptop without a PCIe slot,
This gives us a straightforward way to connect a desktop GPU.
All I need is an 8-lane to 16-lane riser card like this.
Although the GPU I picked is a little oversized for this machine.
Look at it. This GPU is almost as big as the whole PC.
There's no way it's fitting inside.
No worries. I've got another PCIe extension riser. Plug that in here.
There we go.
This card also needs an 8-pin power connector,
so I'm using a separate power supply for
the RX 6600.
That takes care of the GPU.
Now let's deal with this stock cooler.
A design like this puts compact size first
and cooling performance takes a hit.
So it's coming out.
In its place, I'm using a low-profile Jonsbo cooler.
Better cooling, while keeping everything as compact as possible.
Luckily, the original fan runs on 12 volts too.
I just need to wire up the new fan and we're good to go.
RAM. Gaming with two 4GB sticks? Yeah, that's not going to cut it.
I'm swapping those for two 8GB sticks.
And that's all the hardware upgrades done.
Now I'm starting to wonder if this thing's actually going
to work. Let's plug it in.
Wait, what? There's the Lenovo logo.
Perfect. I was ready for the worst.
Or at least a few failed attempts before it finally worked.
Alright, let's check the hardware.
CPU, check.
16GB of RAM, check.
And AMD Radeon?
Nice, everything's showing up.
But you know I'm not leaving it all
scattered across the desk like this.
We need a case.
Time to start designing.
I designed a custom case for the Lenovo.
Man, this thing has a lot of ports to work around.
There's a gap underneath, just big enough to route
the riser cable around to the GPU in the back.
And of course, vents everywhere.
Here, here, even here.
The whole print took 10 hours.
Luckily, nothing went wrong.
Otherwise, yeah, that would have been a headache.
First, I need to get the motherboard out of the original case.
Time to move into your new home, buddy.
But as soon as I try putting it in, I realize something.
We need to figure out the cooler mount first.
The stock cooler screws directly
into mounting posts on the original chassis.
So I'm trying a 3D printed mounting bracket.
Sounds a little ridiculous, but it's actually solid.
It holds everything nice and snug.
Next I set the motherboard in place and mark the mounting holes.
Then I drill them out and use 0.8mm standoffs
with screws at both ends to hold the board in place.
The riser cable runs underneath,
right here.
But now the power button sits too far back from the front panel.
I need to find its contacts on the board,
then run extension wires out to the case's power button.
Alright, done. Now I can secure the motherboard
and connect the riser card.
The rear section is where the GPU goes.
To save some space, I'll take off its metal I/O bracket too.
And when I slide the card in, look at that.
It fits perfectly. Everything lines up.
To hold it in place,
I'll drill a few small screw holes near the display outputs.
Perfect. That's not going anywhere.
The extra power supply goes right here.
But something's getting in the way. Oh, it's the power inlet.
I'll open up the power supply
and relocate that inlet to the back of the case.
Man, this thing's really held in there.
Took a little effort to get it out.
I'll also disconnect the ground, live,
and neutral wires so I can extend them.
Alright, extension's done. Let's close the power supply back up,
put it in place, and tighten the mounting screws. That's secure.
Now I can route the wires to the inlet's new location,
mount it, and reconnect everything
the way it was. This power supply didn't come with an on-off switch
though, so I'm adding
one here to shut it off when I'm not using it.
I don't want it running all the time.
A little cable management to tidy things up?
Wow, that actually looks good, right?
Hmm, the GPU power cable's a little too long.
It's making things look messy,
and the power connector's blocked off too.
No problem! I'll repurpose this
modular power cable to make a shorter, more compact GPU power lead.
These wires are all black, so I can't tell them apart by color.
I need to label the pin positions to match
the original cable that came with this power supply.
Getting that wrong could short something out and fry the hardware.
And I'm guessing nobody wants that happening to their PC.
Once I've got everything mapped out,
I attach the wires to the terminals and slide them into
the connector housing. Very nice.
One custom GPU power connector, done.
I wouldn't recommend
trying this yourself unless you're sure you know what you're doing.
Last piece, the power button.
I just pop it into place
and connect the wires I extended earlier.
Then it's on with the front panel,
a few screws, and the two side panels.
On the GPU side, I'm only covering the top section
and leaving the card exposed.
That gives it plenty of airflow and honestly it looks too good to hide.
And with that, this little gaming PC is officially finished.
Damn, this thing looks so good.
Just look at it, a powerful gaming PC in a tiny package,
and best of all, it's cheap for the performance it delivers.
Oh my god, I could stare at this thing all day.
But let's fire it up and see
if we've actually fixed those earlier problems.
Let's fire up Minecraft and see how it performs.
Oh my god, this actually works!
As you can see, both the CPU and GPU are staying below 65 degrees
Celsius. That's a huge improvement over what we
were getting before. And it's not just the
temperatures. Thanks to the additional GPU,
we're also seeing a pretty big boost in FPS. I'm running
a newer version of Minecraft at 18 chunks,
and we're consistently getting over 200 FPS.
But here's the interesting part.
Neither the CPU nor the GPU is being pushed to its limit.
So why not crank things up to 4K?
I'm not going to waste time testing lightweight games again.
Instead, let's see how this thing handles something more demanding.
With shaders enabled, the frame rate drops quite a bit,
down to around 40 FPS.
Interestingly, the CPU isn't even breaking a sweat,
sitting below 20% usage,
while the GPU is working overtime to handle all those graphics.
So let's move on to Cyberpunk 2077.
At medium settings, I'm getting a pretty stable 35 FPS.
Sure, that's not exactly impressive,
but for a story-driven game like this, it's still perfectly playable.
So, what's the verdict?
This little machine can handle games at full HD resolution,
although 4K is really only practical for less demanding workloads.
And honestly, I'm pretty happy with that.
We've turned a pretty crappy little PC into a capable gaming machine.
The entire upgrade cost me 300 bucks.
Was it worth it? I'll let you be the judge.
And if you enjoyed this build, don't forget to drop a like.
