If I Had a $2000 Budget, This Is the Gaming Pc I Would Build

Tech Care
3 followers
Nov 13, 2026
AI Generated·May contain errors
For the CPU, I'm using AMD's Ryzen 5 9600X.
It's a six core 12 thread processor
with a boost clock up to 5.4 gigahertz.
Now for this build, I'd rather keep the CPU costs reasonable
and put more of the budget towards the graphics cards.
Since high refresh rate 1440p gaming
is really what I'm aiming for here.
I'm plugging that into an ASRock B850M
Steel Legend Wi-Fi motherboard.
This is a micro ATX motherboard, and a big part of why I chose this is,
well, first, obviously the color.
You get the white board, these large VRM heatsinks,
and a heatsink over the primary M.2 slot.
So it's going to fit the look of this build really well.
But of course, it also still has a very useful feature set.
There are three M.2 slots with PCI Express 5.0 support
on the primary slot, along with Wi-Fi 7 and 2.5 gigabit Ethernet.
Around the back, you've got USB Type-A ports and a USB-C port,
plus your display and audio connections.
For memory, I'm using 32 gigabytes of Team Group T-Create DDR5.
The white heat spreaders work really nicely with the motherboard,
but this is one component where I wouldn't get too attached
to the exact model that I'm using here.
My recommendation for a build like this would
be to aim for a matching 32 gigabyte kit
and compare available deals.
I wouldn't spend a huge amount extra just
to get this particular set that I have here,
especially when you're trying to keep
the whole system around a specific budget.
For storage, I'm using a one terabyte Samsung 970 EVO Plus.
And my advice for this here
is pretty similar to the memory.
This is the drive that I'm using in this build,
but you don't need to go out and find this exact model.
I'd compare other current one terabyte NVMe options
and put that money towards whichever sensible option
has the best price whenever you're buying it.
Now for the CPU cooler,
I'm using the Thermalright Peerless Assassin 120SE in white
with ARGB fans.
It's a fairly substantial dual tower cooler
with six heat pipes and 220 millimeter fans included.
The heat sink is 155 millimeters tall,
which fills a good amount of the available clearance
in our case, which can fit up to 168 millimeters.
Installation for this is pretty straightforward.
We can install the AMD mounting hardware,
then apply thermal paste
and secure the heat sink over the CPU.
Once that's in place, we can clip
the fans back on with the airflow directed
towards the rear of the motherboard.
I'm also going to connect the fan and the lighting cables
now. There's much better access
while the motherboard is still outside the case,
and that leaves us with most
of the motherboard preparation already finished.
For the case, I'm using the B4M-ATX from Lian Li and Dan Cases.
It's a 21.3 liter case, and I went with a white mesh version,
which costs around $75.
There's also a wood front version,
but I'm keeping this one as an all-white build.
The construction is steel rather than machined aluminum
that you'd get on some of the more
expensive cases, but for the price,
I really think the quality is very nice.
It doesn't feel like the design has been neglected just
because this is a relatively inexpensive
case.
Now, one of my favorite things about this case
is that you can use it horizontally or vertically
straight out of the box.
The rubber feet for both the orientations
are already built into the case
and they're low profile enough
that neither position looks like an afterthought.
You don't need to buy a separate stand
or move all the feet around to change how you use it.
You can just kind of flip it whenever you want to.
The rear connections are recessed into the case,
which leaves space for your cables
when standing it vertically.
And I think that's a really clean solution,
especially for something this compact.
To get inside we can pull off the top panel and underneath that are two
pre-installed 120 millimeter fans.
Now these are slim fans so they are 15 millimeters thick
and considering the price of this case having both those included is
actually a really nice bonus.
There's also a removable side bracket for additional cooling but
since I'm using a tower air cooler
here I'm gonna take that out for now.
For this air-cooled configuration,
Lian Li also recommends that you flip the top front fan to intake.
So I'm going to do that here while leaving the top rear fan as exhaust.
The idea is to bring fresh air into the front of the CPU cooler
and then assist the exhaust on the way out.
I'm also adding a 120 millimeter exhaust fan at the rear
and two more 120 millimeter fans at the
bottom as intake. Now all three of those additional fans
are the standard 25 millimeter thickness.
That works with the motherboard
and the graphic card combination that I'm using here,
but you will want to check the clearance if you have a thicker
graphics card. You may not be able to fit your standard fans.
You might need to go with slim ones if you
do something similar to what I'm doing.
Before dropping the motherboard into the case,
I'm going to connect the CPU power cable up at the top.
That connection is just much easier to reach now
than it will be once the board
and that large CPU cooler are inside the case.
And because we're using a modular power supply,
the other end of the cable can stay disconnected for the moment.
So we can lower the motherboard into position and fasten it down.
The screws come in these labeled bags inside
a little plastic tray which I thought was nice.
Everything is organized
so you're not sorting through one big bag trying to
you know figure out which screws go where.
For the power supply I'm using the white Corsair RM750E.
It's a fully modular 750 watt ATX power supply.
Now the important dimension for this case is its length.
The B4 does support ATX power supplies up to 140 millimeters long
and this unit fits that requirement.
The case comes with brackets for both SFX and ATX power supplies,
so you have either option to
choose from. But for this build,
we'll remove the ATX bracket and attach the power supply to it.
Before putting this into the case,
I'm also going to connect the case cables to the motherboard.
That includes the USB Type-A header,
the USB-C connection, and the remaining front panel
connector. I'm also going to connect
the motherboard's 24-pin power cable now as well,
because access to that side of the board is just going
to be much better before the power supply
Now the orientation of the power supply is one
of the more interesting parts of this case.
The exhaust side, or the side with the power switch and the AC socket,
that faces out towards the main side panel
and the modular cable connections face the
opposite direction towards
the cable management side behind the motherboard.
There's a cutout over there that gives you access
to those connections so even after
the power supply is installed you can very easily get
to them and plug everything in.
I really like this arrangement.
Typically, you'd see those modular connectors
and their cables hanging down into the graphics card's path,
but instead they're moved over to the other side of the case
and it doesn't obstruct the length of the GPU
that you can fit.
With the power supply secured,
we can connect the modular cables through that opening and start
tidying everything up. Mainly trying to keep
that lower part of the case clear because that's where
the graphics card is going.
Now for the graphics card, I'm using the ASRock Steel Legend RX9070XT.
And obviously this is the white version
so it ties really nicely with the motherboard and
of course all the other components that I chose here.
The 9070XT is one of my go-to
options for this kind of system. We have 16 gigabytes of GDDR6 memory.
A triple fan cooler,
and it uses two standard eight pin power connections.
it's also just under 300 millimeters long
so we're comfortably inside the case's length limit
because it's a gaming build this is obviously
where you want to put a substantial part of the
budget but just like with the memory i would
compare different 9070 xt models rather than
paying a huge premium solely to get
a white version unless the all-white aesthetic is
very important to you installation
is of course straightforward we can remove the
two expansion slot covers then plug
the graphics card directly into the motherboard once the card
is seated we'll secure it to the case
and connect the two eight pin power connectors
Then we can finish tidying up the cables,
making sure nothing is sitting up against
the top fans or the graphic card fans,
and that's the build complete.
So testing out gaming performance,
I tested three games all
at native 1440p without upscaling or frame generation.
Starting with Cyberpunk 2077,
I used the high preset with crowd density set to high,
and ray tracing turned off.
Performance was generally around 120 to 130 frames per second,
and after...
Playing more than 20 minutes,
the CPU was sitting around 71 degrees Celsius,
pulling around 81 watts.
The GPU was in the low 60 degrees,
with 63 being the highest temperature I observed
while drawing approximately 300 to 305 watts.
So even after giving the system time to warm up,
those temperatures were staying very reasonable.
Next was Resident Evil Requiem,
using the high preset with ray tracing turned off.
Here, I was seeing around 140 frames per second,
mostly in indoor areas.
The CPU was a little cooler at around 63 degrees,
drawing between 65 to 70 watts.
And the GPU was sitting also around 63 degrees,
with a power draw again around 300 to 305 watts.
For the last game, I went with Star Wars Galactic Racer,
so I wanted to include something newer,
and I used the Epic preset for this one.
Performance was just over 140 frames per second.
The CPU was around 65 degrees,
drawing approximately 73 watts,
while the GPU was around 64 degrees
and drawing between 230 and 235 watts.
So across those three games,
we're getting the kind of high refresh rate
4040p performance I was hoping for,
without relying on upscaling or frame generation
to get there.
As far as noise goes, I'm using the silent mode
fan preset in ASRock's BIOS.
The noise reading was around 45 decibels, measured from about
8 inches to maybe a foot away from the case,
which is a fairly close measurement,
so keep that distance in mind
when we're looking at the number.
The loudest part of the build seemed to be
from the two included fans of the case.
Most of the fan noise I was noticing during testing
was coming from those.
Overall, this turned out really close
to what I wanted from the build.
It looks good, the gaming performance is strong,
and the temperatures and noise levels
are both at a level that I'm happy with.
The part that surprised me the most was really the case.
I kind of slept on the V4M ATX.
I wasn't really paying much attention to it,
but after actually building in it,
it has quickly become one of my favorite micro ATX cases I've used
I really like that it works
in either orientation without needing any sort of separate stand.
I like the power supply arrangement
and the fact that I can fit an ATX power supply,
a large graphics card,
and a substantial air cooler without ending up with a you know huge system.
