One of the ways you can support our channel, is by checking out the items we promote on Amazon. If you purchase any of these items, or even follow the link, it pays us a commission. Even if you purchase other products after following the link it pays us a commission.
At the moment, we'd like to show you this beautiful Weller soldering iron that we use every day in our videos. The Weller adjustable temperature irons work better than cheaper ones because they attempt to keep the tip at a certain temperature, and are a higher wattage. This helps you get nice solder joints and makes it easy to do repairs.
These links below are to this product in various areas of the world, thanks for watching!
Check Out Our Patreon Account, for Unreleased Repair FAILS, Concise Repair Tips Not Possible In This Long Form Video, And 1 on 1 Repair Assistance with YOUR Project!
Our store is located at 139 Caldwell St., Rock Hill, SC 29730.
Video Summary
AI Generated
Joe's Classic Video Games demonstrates the installation of an LED display kit on a Williams Road King pinball machine to fix intermittent display failures. While the LED upgrade resolves plasma-related issues, the technician must further troubleshoot a temperature-dependent hardware fault on the main PCB, eventually tracing the problem to a degraded capacitor in the blanking signal circuit.
Ladies and gentlemen, this is Joe's Classic Video Games back with another cool pinball
repair video for you. We've been working on this Williams Road King pinball machine
and we're up to messing with the displays. We messed with it last time. We had them all working,
turned it off, turned it back on. Now we're back to just there's a couple digits
working and the rest aren't. We've swapped out the
master display board. We've had to work significantly, of course, on the PCB because
of the battery damage and we're just working with a bunch of trashy components really. So
I have ordered an LED kit of displays. It seems like these come back after it's on a while or
something, which I guess would point to the master display or the power supply, but we have actually
worked on the power supply as well and rebuilt it. But anyway, so we're going to swap over to LED
Usually I don't really like upgrades much. I like using the original stuff. See how the third digit
is starting to come back in? Usually I don't like swapping over, upgrading things. I like just
fixing the stuff we have. The exception of that for me is displays. You can't really fix a plasma
display and we don't have a set of five that we could use. A lot of them are screwed up. So while
the high voltage on the power supply might be part of the issue that we're having here,
on an LED set, you don't need that. And the LED ones look about the same as the plasma ones. Yeah,
now we have three digits back. Look about the same as the plasma ones. They run off the five
volt. It really is an upgrade. And since you can't buy these anymore, it's kind of a necessary
upgrade. So that's what we're going to do today. We're going to get rid of our trashy original
ones. We'll save them for another machine. We've got three here that work, I believe, kind of
something's going on, right? But we'll save those. Eventually we'll get in a game that
only needs one or something like that and we'll be able to fix it. But the first thing we're
going to do is put together this Wolfpack Tech set of displays. I went ahead and got the
amber color. You can get red, green, blue, all that stuff. Red would probably look pretty good on a
but I like the way the amber looks. I just went back with the original amber. So let's get this
stuff out of the box. We'll put it together and see if that fixes our issue. I suspect that it
will. I also had to order a couple of ribbon cables that were screwed up. If you didn't
watch the previous video, we had a problem where one of the, well, there's a lot of corrosion on
the boards on the actual displays. And so even one of the ribbon cables got corroded. Look at that.
If you think about it, the batteries on the board hang right over that master display board.
If you look, the fourth digit is now coming back. So I guess I'll leave it on for a while and we'll
see if all seven of them come back. But we'll get started building this and that should fix
our display issues. And then if it does, we'll move into working on the switches and the coils
and all of that and get this sucker up and running and playing. Okay, so I started putting it
together. This is actually a very easy one to do. Wolfpack Technologies Williams System 11 Data East
Laser War Replacement Display Kit. They just mentioned, it says System 11, but there's different
ones for different games. There's different sets basically. And it shows you, because some of the
System 11s were all on one big display board. And it shows you like the part numbers here.
Now on Williams games, the displays themselves don't have any parts on them really. They just
have the glass and a connector. So they send you a bunch of little boards for that.
And that's what you've got. You've got... Oh, they've got the little pads in there too.
You've just got LED digits that go in there and a connector, right? So the only thing that you
really have to assemble much that's got at least, you know, discrete components that you have to
worry about getting in the wrong spot is this master display board. I just put it together,
took like 20 minutes. It's not that bad. So all of the capacitors are the same. They're just
bypass capacitors. All of the resistors are the same. Yeah, I tried to put them all in the same
orientation too. It just looks cleaner, you know. And I don't think that the chips can go in the
wrong spot, because I think they all have different numbers of pins. One, two, three,
four, five, six, seven, eight, nine. And these are one, two, three, four, five, six, seven,
eight, nine, ten. Yeah. So you've got eight pin, nine pin, and 10 pin chips. So you can't really
even put them in the wrong place. Although you could put them in backwards, but the board is
clearly silk screened. And then the connectors, these are the ones that come straight off the
board like that. The ones that go at a right angle off the board are the ones on the actual displays.
And then the other ones are the power ones. And if you just look at the original board,
it kind of shows you how those go. But this is actually the one that we had that was in there
before. You can see the damage to it from the battery alkaline. I stole a few chips off of it
on the last video to put on our other master display board. Now you might be thinking,
well, why did you fix that other master display board if you were going to put an LED display
board in it anyway? Well, I'm trying to like consolidate parts. I like having one of these
that's working and ready to go in case I have a game that I needed one. Now, usually I can just
repair it, but I might get another game that's got battery damage. Like this one, I'm probably
not gonna be able to use anymore because it's pretty rough. It's not the worst I've ever seen,
but see how the traces are black? Some of those are going to be broken where they don't work
anymore. Another thing that's interesting is see where it says player five and player six? That's
for the shuffle alley games that Williams was still making at the time. And the Wolfpack board
does not take that into consideration. So they don't want this to work in the shuffle alleys
as well. So you would either have to get a different kit from them, which they may do,
or use original stuff in the shuffle alley. But you can't use this board to replace this
and drive those. It won't work. And you can't use this board to drive the LED displays. It won't
work. Another thing that's interesting is the power comes in right here. And a couple of those
voltages are the high voltage for the displays. But if you look on this board, see how there's
only one trace on the top? I guess pin six there. And if you look on the back, there's one other
volt. That's because they're running everything off of five volts. So the high voltage pins on
this one, I guess would be pins three and four there. And I don't know about two. Two might have
something as well. Kind of looks like it does if you look at it. So if your power supply is still
putting out the high voltage, which is something like 200 volts or something like that, I think
maybe it's 110 and then a negative 110. I think it's positive 90 and negative 90 or something
like that. So that's a 200 volt differential. If your power supply is still putting that out,
which ours is, you don't need that voltage. So you can remove the fuse for the high voltage on
the power supply, which will also cut down on heat and amp consumption. It won't use as much
wattage consumption. It won't use as much power because it won't be trying to create that high
voltage, even though there won't be any load on it. But if you, let's say you just leave it and
don't even take the fuse out, it will still plug in. Those wires will still be there on this,
but they won't go to anything. So it'll just basically be as if it's unplugged and hanging
in the cabinet. So there won't be any load on that. They didn't populate that section
on the plug and there's nothing in there that uses that voltage. Nothing hooks to it.
So anyway, that's our master display board. And like I said, you can't put this in and try to
run the regular displays off of it. It's not going to hurt anything, but the regular displays are
plasma and they need that 200 volts or they won't light up. So if you plug them into this, nothing's
going to happen. You're not going to see anything. But that's why it comes with everything in the
kit. So I'm going to pop this in there, turn the game off, and then I'm going to build the displays
one at a time and we'll put them in one at a time and see how they look. And just to show you,
once you leave it on a while, all of them come back. So that may be an issue with the high
voltage or it could be some capacitors on the main board. We'll see. So what I'm going to do,
this one has a segment missing as well, but that could be the master display board. But anyway,
what we're going to do is I'm going to turn it off for the evening. When I come in tomorrow,
it'll be cold again. And by cold, I mean room temperature won't be heated up. And we'll put
that board in and we'll build a display and then turn it on and see if it immediately comes up with
all of the digits or if it gives us something similar where there's a few missing. Because if
it's only lighting up two or three like this one was, then it could actually still be the main
game board because that's the only thing that we're not replacing. It could be the ribbon cable
too, but ribbon cables usually don't get better as it heats up. So, all right, that's where we're
at. Okay. It's the next day. I haven't put the master display in. I populated all of the regular
displays and put them in. Pretty cool. Let's see if she'll work. What do you think? Is it going to
still have a board problem? Now, if you didn't watch the previous videos, we did a whole bunch
of work on the board because it had extensive battery damage. Let's see. And then we had the
problem where when it first came on, only a few of the digits would work. Oh, that doesn't look good.
So, yeah, that problem might still be there. Interesting. So, that would be a MPU problem.
So, let's see. Hit it. Let's see. Oh, it's telling me like audits, I think. Let's turn it off and back
on. Oh, I got to do the little... I got to do the... I got to get it in gameplay first.
Okay. So, that's display test. We have exactly one digit working on one, two, three, and four.
Digit four is working on one, two, three, and four. And the ball and play isn't doing anything.
All right. So, I'm going to leave it on for a little bit and see if they start coming back.
I assumed that was a problem with the power supply, but if you think about it,
if it was the 190 or the 100 volts or whatever it is on the power supply,
that would affect all of them, you would think. So, it must be some kind of... we got some kind
of issue still going on with the board. So, I'm going to leave it on a while and see if they start
fading back in like it was doing with the plasma displays. And by the way, we didn't have enough
plasma displays to populate it anyway. So, we had to get the LED upgrade. But since it's doing the
same thing, it's got to pretty much be a PCB problem. Okay. So, it's been three or four minutes
and now there's two digits on each display that works. So, that's our clue. It's temperature
related. Now, what I'm going to do is I'm going to go ahead and turn it off before it gets warm
enough that they all come back. But I assume that eventually all of them would come back like they
did on the plasmas. But we kind of want it to stay cold so we can troubleshoot it. The worst
is intermittent stuff like this. It's so hard to figure out because you can't control the variables
like how hot it is and how cold it is and the temperature of the chips and things. But that
tells us that it's not anything on the displays or than a master display. It could be the main
ribbon cable. I've got one of those, but I don't see how that could be an issue, right? So, we've
got a problem. Usually, when everything's changed over time, it's like a capacitor problem. But we've
replaced a lot of that. So, I don't know. We'll see what we can figure out. Okay. So, I tried a
different ribbon cable that didn't change anything. And now when I turn it on, we only get the one
digit because it's cooled off a little bit. So, this is where the digits come from. It's U51
6821 PIA. We replaced that in the previous video. Didn't change much. But if you look,
when it comes out of there, it runs into SRC9. The ones that say C have a capacitor built into
them. And if you look at, there's a 4.7K resistor that's tied to ground. No, that would be tied to
voltage, pull up resistor. And then there's a 470 picofarad capacitor on every one of those lines
that's tied to ground, right? So, none of those have been changed. Sometimes you get a problem
where one of those shorts to ground. I just measured. I couldn't find any of them short of
ground. Okay. So, those lines leave there and that's them here. And so, some of them run into
this 74154. We replaced it as well. That didn't change the thing that we're seeing now. And keep
in mind on the previous video, I guess at the beginning of this video too, you saw that all
of the displays are working after they warm up. So, it sounds like a capacitor thing. So, this
has been replaced. Remember there was a lot of damage to the board. And then it runs to two more,
SRC7 and SRC8. Neither of those have been replaced either. And then as you can see,
they get out to the edge connector. I mean the connectors. So, what I did was I compared each
one of those signals to ground and I got 4.7K resistance from it to ground. So, I guess it is
a pulled down resistor. So, I'm getting 4.7K resistance to ground on every one of these,
all of them. So, all of the strobes and everything, because I'm thinking, well,
maybe one's locked to one or something. And then some of the other signals from that PIA chip,
the 6821 that you can't see over here, that's all these signals come over this way. And so,
I checked all these two on IJ3, all of them 4.7, 4.7, 4.7. And if you remember over here,
it ran through a 4.7, the same one over here, right? But when you get down to number 11,
pin 11, it says comma three and four, you can see that each one has a capacitor to,
oh, I'm right. Capacitor to ground. Yeah. So, it is a pull-up resistor, of course.
And then they have these three resistors here on these three lines.
10 is 4.7, 12 is 4.7, but 11 is 2.8. So, something's going on there. So,
we're going to look at pin 11 and track that back, find this resistor, see what's going on.
And it could be that it's shorted to something. It could be that this capacitor is starting to short,
something like that. So, I think maybe what's going on is when it comes on,
something's wrong with this one line and it's kind of almost locking one of the displays on
and making it where the other one's all starved for energy or whatever, or whatever, electricity.
And then eventually, it all kind of works out whenever everything warms up. That's my thought,
at least. Now, if that's not what's going on, there's some kind of problem going on there
because it doesn't measure right. So, let's see what we can track down.
Well, after testing it, it's actually irrelevant. What it comes down to is it's connected directly
to pin 39 of the PIA. And if you check pin 39, just because of the internal construction of the
chip on all these PIAs, pin 39 has 2.8K resistance from it to ground. And you get about the same
from it to five, because five and ground are about 260 ohms apart on this board.
So, that doesn't seem to be it. So, let me keep looking, see what else I can find.
Okay. So, back to messing with the display. So, if I check the voltage, we've got a good five volts
as soon as you turn it on. And Joey has already recapped the power supply. I don't believe there's
any problems on the power supply. And a voltage problem is really not going to make it where
one light works or one strobe works at the beginning, but the others don't. So, this digit
works and then this one starts coming in and then, or whatever, maybe this one's the one that works.
And you get more and more of them as they sit here. And after 25 minutes or so, everything works
fine, even with brand new displays. Now, some of those older displays, probably more of them work
than I thought, but again, I'll save them for the next game that we get. Eventually, we're going to
get a game where I don't have to order new displays for it. So, why would it do that? Well,
if you watched the previous video, we already replaced a lot of the stuff that handles the
displays. And I've got a new ribbon cable, which that doesn't actually do the digits, but
these connectors are fine. We've got a new master display board. We swapped the displays around.
It's nothing with the displays. Of course, they're all new anyway. And then the chips that drive it,
you've got this 74154 decoder chip, which is a four to 16 BCD decoder, I think. I checked all
the traces. Everything's good. We've got a few jumpers on the back, even. I've checked, triple
checked, quadruple checked, quintuplet checked. I bet you've never heard anybody say quintuplet
checked. The capacitor and resistor packages here, we've replaced, cleaned up everything.
The PIA here, we've replaced. The PIA here, we've replaced. Everything that handles the
digits has already been replaced, except for one thing. It's the dreaded thing nobody ever
wants to talk about when it comes to a Williams board. That's right. It might be the blanking
signal. Now, I know what you're thinking. You're thinking, I don't want to hear about
the blanking signal anymore. I think it might be the blanking signal, people.
So Williams had this little deal that they designed into their boards,
starting with their very first produced games. Now, I don't know for sure that this is the
problem, but I'm leaning this way. This is what we're going to check next.
So the first system that Williams released publicly was the System 3.
There were games like Flash, I think, was a System 3. I think it was a System 4, actually.
What was that very first one? Hot Tip. I think Hot Tip was a System 3.
System 3, System 4, System 6. I don't believe there were any 5. Were there any System 5 games?
I'm sure all y'all know this more than I do. System 7 were the early versions of the Williams
board sets. So System 3 through System 7 are the ones that you basically could get
in games over the years. Anyway, they all had a similar design. They had an MPU board that sat up
here, and then they had a board on the bottom that handled solenoids, lamps, switches. I think
there were special solenoids on those too, or I think switches are down here on this.
That board had a blanking signal. There were problems where whenever people started repairing
them in the 90s, they would keep running into this issue with the blanking signal.
So what they did was they designed a setup where if the PIA chips, if the CPU is not talking to
the PIA chips or something, it turns on a signal called the blanking signal that kills the solenoids
and kills the displays because those are the high voltage parts of the system,
and it doesn't want those locking up and things being screwed up if the board is not properly
running. I don't think it's actually the PIA that does it. I think it's just that the code,
if they have a problem with the code, the blanking signal dies. It turns off the blanking signal or
turns on the blanking signal, and it literally blanks the displays and it blanks, makes the
solenoids not work. Well, didn't we have a problem where some of the solenoids weren't working?
I can't remember. I think we did a solenoid test and some of them didn't work, and we thought,
well, we'll just get that later. The switches and the lights are not controlled by the blanking
signal. So we could have that issue. Now this is not a system three through seven. This is a system
11. Well, they made system eight after system seven, but it was only used in a couple of games.
One of them was a pennant fever pitching bat game that they put out. Really cool game. We actually
did a repair on two of those on our channel and did a bunch of videos on it. So if you would like
to see a system eight game, if you go on our channel, at the top of our page on our channel,
it says playlists. If you click our playlist, I have been working diligently for a while. I put
in a bunch of effort on this, people. I did something I've been wanting to do for a long time
and I pulled it off. I have sorted all of our videos and we got a bunch of videos. There's
about 1500 videos on our channel. I have sorted them all into playlists. So for years, we haven't
had our playlists right, but they are fixed up now. So check that out. I don't know how easy
it is to do on mobile, if you watch on mobile, or how easy it is to do on Roku, but on a desktop at
least, and I assume they're similar. If you go to the top of our channel, it says things like
videos, community, store, members, and there's a playlist tab. If you click the playlist tab,
we have like 203, I think, playlists right now. So we actually have a playlist of that system
eight game. So let's see if we can find it. I click playlists and look at all these suckers.
Look at them. Look how it says updated yesterday. I've been doing some work. So let's see if we can
find it. I think it's got a picture of two of them and it's a pennant fever. I believe that's
actually one of the older playlists that we've actually had up on here a while. The problem we're
going to have with this many playlists is finding the playlist that you want to watch. Some of them
have the same thumbnail. I haven't updated all that yet because, you know, some of the games are
several different playlists. So there we go. Bam. Repairing Williams pennant fever,
pitching bat pinball machines. And so we've got a little rare system eight pinball. So
we've got all kinds of stuff like that. Now I have to watch a freaking video. Oh,
they're screwing me here. If you get YouTube premium, you don't have to watch the videos,
by the way. I just haven't done it yet. Okay. And I did one just recently. One of these new
ones is called Williams system three through seven pinball machines that we have repaired.
Here we go. Williams system three through seven pinball machines we have repaired over the years
right next to cool pinball machine, Steve Ritchie design. There's 40 videos in that,
for instance, and the right next to early stern electronics, pinball machines we have repaired
just 48 videos in that. So anyway, check that out. If you get a chance, all of that is just a
convenient time to tell you about because we're talking about the blinking signal. Let me show
you on the schematics, what the blinking signal does. So here's the master display board. These
strobes are what turns on each digit. And then these are like a little strobe with a hash mark.
These turn on some of the other displays, but all of those signals, if you look,
come from these chips and come from these connectors. They all run through a gate,
right? And the gate is on or off depending on the blinking signal. So my theory is this signal is
in a weird place and it's got like the chips pretty much turned off where the displays won't
work, but maybe one of them's still turned on. One of these strobes is still working or something,
whatever, right? Maybe whatever, because of the way the blinking signal is working.
So that's where it ends up on the displays. Here's where it ends up on the solenoid drives.
It comes in here, goes through a gate, which basically if it's on,
the solenoids can work. If it's off, the solenoids can't work or whatever.
Now on the system three through seven boards, the issue with it was there was a connector
between the two boards that sometimes would give you problems. But generally,
if you have a blinking signal problem, it's usually because you have a software problem.
We don't have a software problem. The board is booting, but we had all of that damage on it,
the battery damage. So I think we may have a capacitor problem in the actual blinking circuit.
So this is where a lot of people always got this confused. Now you may be wondering,
why am I talking about system three through seven? Why am I talking about system eight?
It's because they're all very similar. The design was very similar, just the layout of the boards
changed a little bit, but they kind of worked the same way. So system three through seven,
and then system eight was pennant fever. System nine was, was that high speed or space shuttle?
One of those. So system nine, there were a few system nine games, and then they moved up to
system 11. They're very similar. The way they work is very similar. The boards just look a little
different, but it's the same idea. If you work on a few of them, you'll start seeing all the
similarities when you start looking through the schematics and you'll realize, oh, wait a minute,
they're doing the exact same thing they did on a system three board, for instance.
So here is how they create the blinking signal. It's this little timer chip. So the timer chip,
if you'll notice, and this is just something, if you're not heavy into the schematics where you
don't work on these a lot, or you're just starting out, this is an interesting chip.
This timer chip, 555 is very popular. It's in all kinds of things and they cost like 30 cents.
Very cheap. It only has eight pins. So it's a little square chip. And if you look,
all of the inputs to it are just connected with a resistor to ground and there's a transistor there.
And then this one has a capacitor to ground and a resistor to the power. This means the
logic voltage. So the inputs to the chip, the CPU is not turning this chip on.
What turns this chip on is just the power to the board coming on. So you've got a ground
and you've got power. And that's basically what's going on. You do have this here. I don't know what
it does. And then the output is the so-called blanking signal that comes out of it. So that
signal, I guess they can kill it. The CPU can kill it with this line, can turn the blanking signal
off or whatever. But that blanking signal is completely created by this. So if you had a
problem with this transistor, it would screw up the blanking signal. If you had a problem even
with this capacitor, it would screw up the blanking signal. If this chip was bad, it would screw up
the blanking signal. So we may have a situation where it's sending out a weird blanking signal,
where the voltage, and I think it's either just five volts or ground, but we'll see,
where that is messed up. Because we've already replaced all of the stuff that drives those
digits. They ought to be working. And I've tried different chips and things, but we haven't messed
with this blanking signal. It may be obvious once we look at the board. What I was going to say
though is usually if you have a blanking signal problem on a game where the displays don't work
or whatever, it's usually because the software is screwed up and the game is not actually booting.
So the blanking signal is running as designed and blanking the displays and blanking the solenoids.
That's not what's going on here. The game is running and everything's, you know, fine. Well,
to an extent, fine. But you got to sit there and wait for the stuff to warm up. Well, maybe it's
what if that cap was bad? As power increased or, you know, as the heat increased, maybe the cap
starts working and this chip starts working right. Or what if this chip just has an internal fault
where as it warms up, it works better than whenever it's cold. And so that's our issue.
So I think we may have a problem here. So we're going to look at that and we'll probably replace
some of this stuff and just see if that fixes our issue or if not. But make sure to check out
our playlists on our website if you haven't or on our YouTube channel. If you get the chance,
you may find a bunch of stuff in there that you're interested in where we finally got them
all organized. One of the problems we have is we do all these videos and then if it's been six
months ago, it's hard to find where we did a whole section about the blanking signal in the middle of
this video out of 200 or out of 1500 videos. How are you ever going to find that if you're
interested in the blanking signal? So if I did a playlist like I did on Williams system three
through seven games, you can just watch that playlist and we're inevitably going to talk
about the blanking signal. So here's the board. I was going to try to start the test mode and go
in and see how many of the coils were working, but I forgot to do it. Oh well. Here is the 555 chip.
Now we have already replaced it and put a socket in it because there was all the battery damage
here. Now that little one microfarad capacitor that we were showing on the thing that feeds
this is this one right here and we did not replace it. So that is our freaking culprit,
I would think. But I'm also going to take all of this and clean it again and just check every trace
to make sure everything's going where it's supposed to and make sure that nothing's touching
there's no problems. But this cap C58 has not been replaced. It looks like crap and it's one of
those little, it's a R79 suspect too next to it, but it's one of those caps that is, I think it's
polarized, but in a weird package. So for me at least. So I'm going to pull that out and whenever
I figure out something interesting, I'll show it to you. But I think our problem might be right in
this little area. So here is that capacitor. I don't know if we can read it. It's not in great
shape, but you know, you can't tell by looking at one. So let's see if I can test it. I think
I've got a little tester to do down here. Let's see. People send me all kinds of wonderful little
inventions. So for instance, I got this thing. Let's see. Maybe it'll tell us if that thing
is a one microfarad or not. Look, this is one of its flaws. See how it's upside down?
That's because I'm left-handed. It's designed for righties. I don't know.
420 nanofarads. So that's like less than half of what it's supposed to be, isn't it?
So let's see here. Let me grab another. Let's see if it likes this better.
That's what we want. Look at that. Accurate to within eight thousandths, seven thousandths.
Yeah. So it could just be that's bad. I don't know. I mean, kind of test bad, don't it?
Maybe that's enough to screw up the timer chip. Oh, and the timer chip is here.
So I'll swap out that cap. I would measure the resistor next to it. It's a 33K. That's correct.
And everything actually looks fine. Joey already worked on it. Everything's connected the way it
should. All the traces are proper. And I think that might be our whole issue. There's other
few caps there, but they all seem like they're connected properly too. So we'll see if just
this one capacitor fixes the problem. All right. So I got the board back in,
got the new capacitor in. Let's see if we get anything different. What do you think?
Can we be so lucky? You know, I am pretty lucky sometimes. Let's see.
The batteries aren't installed, by the way. Oh, heck, look at this. It's even in a weird
language. I probably said it in a weird language when I was screwing around in the, in the,
the menu. Wow. One hit kill. We fixed it. I found the one component that was dead,
swapped one freaking cap and it fixed it. Joey, calm down. He always does that. Everybody's tired
of it. People have told me they don't like when he does the woo woo woo. They've told me that.
They do not like that. Okay. So, uh, that may have fixed it, but we got to go into the
test mode and we got to figure out why it's in the wrong language because it wasn't earlier.
So if you, if your batteries are dead, if you open up the door on a Williams and then quickly
turn it off and back on, well, that's better. What happens is the, um, uh, the capacitors
in the power supply don't have time to drain. So you turn it right back on and it, it basically
jumps over the, the, uh, the, the chip that the battery was keeping alive so that it could tell
if the, if the battery was dead or not, didn't have time to drain out. And so it doesn't know
that the batteries are dead or actually not even installed. Oh, I went the wrong way.
All this is very readable though. That's good. Music test display test. That's the one.
Look at that. Now y'all can't really see it because of the, the, the way it's strobing.
Maybe if I go back farther, yeah, you can't really tell I'm at the wrong frame rate.
I figured out if you've got strobe issues like that on your, on your camera, on your phone,
if you change it to 30 frames per second, it gets rid of that. So the only reason we're
having that flickering on our videos folks is because we're trying to bring you more high
quality video. Well, I'm very happy that I figured that out with one, one component.
That's what you want, isn't it? I Sherlock Holmes that crap tracked it all the way down to the only
thing it could be. All right. So, um, yeah, that's cool. So I like that. We've got to replace the,
uh, Ram chip with an NV Ram so that we don't have to put batteries back on it. That will
eat up the rest of the board. And we still need to do some repairs on, uh, switches in the play
field and solenoids and stuff. I'm sure, I'm sure there's still more stuff to do,
flashers, things like that. And then we need to play it. So we've got plenty of video left,
but we will see you on the next one. Hey, by the way, did you know that there is a road Kings
pinball playlist? Because we've been doing this so long limping our way through these repairs.
We're, I am, we are not experts by any means, but we've done a bunch of them that we've actually
worked on road Kings over and over again. This is not our first road King. So I've got an entire
playlist of road King pinball repairs. And I don't think there's a ton of them in there,
but there's four or five videos at least. Um, so, uh, I'll put that at the end here so you can
check it out, but make sure to check out all of our other playlists on our channel. You might find
something that you're interested in watching. Hopefully that'll make it a little easier
for people to find the entertainment that they're looking for. So we'll just see you on the next
video, uh, buy some Wolfpack displays. They're, they're a little less than some of the other
brands because you put them together yourself and, um, they work great. I was thinking about
going with the red ones cause it would just look really cool, but I'm a sucker for things looking
original. So I just liked the, the, the orange ones look almost identical to the plasma displays,
the original, the plasma. So I'm really happy with those. And so a lot of times I'll just go
back with the orange ones, Amber. So, um, we will see you on the next video where we'll finish this
sucker up. And, uh, uh, we've got some other good fun stuff before then, if we don't do this one,
if we don't do that final video, the next one around, we'll do something else. We've got a
but, uh, we hope you enjoyed it and, uh, make sure that you
check out your blanking signal. If you've got a problem, we'll see you on the next one.