KID UNDERCUT DESIGN HAIRCUT TUTORIAL + GIVEAWAY WINNERS!

jjaybeardedbarber
57 followers
4 Video Views·Aug 19, 2026
Thank you everyone for watching!
What's up YouTube fam! Today we have a tutorial on a kids cut. We did a lightening bulb design with a under cut. It's always good to push yourself out of your comfort zone! Thank you for all the support and congratulations to the winners of the giveaway! Adsocialist Inc and Vaibhav Patel. Make sure to like, comment, and subscribe to the channel! We'll be doing more giveaways in the future including a PS5.
Links below:
Hair, beard, tools products can be found at www.josephsignatureline.com Use "joseph10" to save 10% on your order!
Clippers and trimmers used from www.gammaplusna.com Use "jjay10" to save 10% on the best clipper on the market!
What's up YouTube welcome back to the channel so today's video is going to be a tutorial
This is on the kids cup. It's going to be undercut
So we're going to be doing superstore on the side with a fade even the top long and slick back
And then we're going to be doing a design on the side. You want a design to be put into his head
Trust me. I don't do good on designs. This is me just stepping out of my comfort zone
I draw chicken scratch this video was recorded a few months ago
so I've definitely gotten better now and more comfortable with doing designs because
I'm slowly, you know, just step out of my comfort zone do no more on people. So I'm getting better at them
I did mess up in this video. I
Would I would say I've messed up. It wasn't too bad. It wasn't the best wasn't the worst but
Toward the back of the design. I should have came into one single line and followed it out
I kind of separated it so it kind of made it look a little wonky
But hey, this is me during my process and this is how I'm getting better and stepping out of my comfort zone. So
You know, I'm really good with my beards and haircuts basically like that
So I'm trying to you know, do things that I'm kind of weak at which are you know designs?
I eventually want to get to like, you know coloring curls
firms things like that, but
You know, we'll get more into the video later on but I'm gonna be announcing the winner of the 25,000 giveaway
So the winner will be winning the oculus virtual gaming which is super dope. And then second place will be winning
Joseph's even sign build the box, right? So I got the names all on the screen right now
I'm gonna show you guys that we're gonna do it here live, you know, all the names right here
We had about 65 people enter
So, let's see who the first winner is
Add
Socialist and corporate you are our virtual
oculus virtual winner
and
Our next winner is
You are winners, so these are two winners see you guys in the description in the comments actually
Reply get some information from you guys. Congratulations. Thank you so much for entering
Next giveaway will be at 50,000 subscribers and that's gonna be for a ps5
All right, so you don't want to miss that the faster we get to 50k
You know the faster you could win the giveaway
You have it I've been looking at the analytics, all right, I see 96% of you guys are not subscribe to the channel
I know you guys forget, you know watch the video you click off
But please make sure to subscribe and like and if you want to comment down below your thoughts or any suggestions
Go ahead, please comment down below
Let's get on to this tutorial
What's up YouTube welcome back to the YouTube channel we have another tutorial today
This is gonna be a kid's haircut
We're gonna do an undercut
With a fade on the side and we're gonna be adding design because you want to design in this head
All right
So make sure to stay tuned throughout the video and if you learn something new make sure to Like subscribe
And let's get into the video. Alright, so right now I'm just gonna lightly wet his hair
Just so I could disconnect the top hair the length on the top from the side hair
so that we get that undercut look and I'm making sure to be
Very precise with this you want that line to be as straight as possible
So it doesn't look all ziggy zaggy and you know, it just looks nice and clean
I'm gonna be doing that to both sides
All right. Once you have the hair pinned up from the top length from the side
We're gonna go ahead and take our number two guard
We have it opened and we're using our ergo clipper right here
This goes through bulk really easy people always ask me does the ergo go through bulk all the gamma clippers go through bulk
Very very effortlessly. So as you can tell it's going through bulk really easily
We're just doing a to guard clean off the surface
Make sure it's all even all across the head because the top is gonna be separated from the top
All right, the sides will be very short tops and be long. We're gonna have a slipped over. It's gonna be disconnected
All right. Also if you did want to go ahead and purchase your own
Ergo clipper or any gamma or style of craft
Tools go ahead and make sure you use the link down below
I have a promo code that will save you about 10 to 15 percent off, right?
And just go ahead and continuously do this throughout the whole head
So everything's nice and even and if you guys are learning something new make sure hit the like button makes us subscribe
It really helps us grow. We're about to come in on 30,000 subscribers. We just did a giveaway for 25,000 subscribers
So once we have 50,000 subscribers, I'll be giving away a PlayStation 5
So make sure to stay tuned the faster we get there the faster way I give it away to you guys
Also, if you guys there's any haircuts that you guys are struggling with or
Want to see more of make sure drop them down below in the comment
So this was the design he wanted done it's like a lightning bolt
Like I said earlier, I'm not great at designs. I'm stepping out of my comfort zone. So please
Keep your negative. I mean actually, you know bring the negative comments help with the algorithm, but I know I'm not gonna
Designs I am definitely practicing and getting better at them
This video was shot a couple months ago or a few months ago. So I'm definitely more confident with my designs now
I was pretty happy with the design on this one except the back of the design
I shouldn't paid attention to the photo more but the lines come together as they go towards the back
I kind of separated them. So it kind of made the design look a little bit off
So I know what I could have done better
Especially come back watching the videos, but it wasn't it was a horrible, but it wasn't the best design. So
This tutorial is not to teach you guys how to do as design
This is gonna be a just a quick run-through of my fading and this is just me stepping on my comfort zone and you know
Getting more comfortable with designs
Right here is where I messed up. So those two lines should have connected
Together and became one line see how I kind of separated them and that kind of brought them together towards the end
That's where I messed up at but you know, you live and you learn
So next time if he'd ever wants to design again or someone something similar
I'll be able to do it a lot better
And the birds gonna fade the inside of the design just so it pops a little bit more and gives it that contrast
you always want to make sure to edge out your design after you get a sketched out because when you use the razor it really
Makes the design pop that much more as you can tell before the you know, the design looked pretty nice
But once you razor it makes it pop just a little bit more
All right. So now we're gonna go ahead and connect that background that we had and we're gonna continue the fade
So we're just gonna do about a mid fade. Keep the hooks
Picture you showed me one side was the design kind of look like a taper on the side get the pics
And the other side I assumed that he faded it. So we went did a ball fade
And we're gonna go through our same steps
Like I said, I'm using my ergo clippers by gamma and I'm using the guards that it comes with
So they have the single magnetic guards that are on there
They are coming out the double magnet magnetic guards, which I'm super excited for but in this video. I'm using the single
Magnetic guards, so it's gonna be the zero guard the one guard and the two guard that we'll be using
So the two guard we used previously
To set the base. So after that we're gonna be using the zero guard and the one card open to close
So right here we're making our first guideline with the plate completely open now
We took our one guard open and then we're gonna close it down
Which were our zero guard open to close and then we're gonna fold up that bottom line clipper from closed to open
All right. So we went through all the guards now. We have the guard no guards on there with the clipper completely closed and
Look, we're going up about a quarter inch and look how that line pretty much removes easily and it's ready all blended now
We're doing the detail. So we opened up the plate a little bit more
Using that corner and then we're gonna open up all the way and we're gonna detail and then if you see some, you know
you ran into the previous guideline a little too much go ahead slap that zero guard on or the one guard on and
Just maneuver with the lever and go until you got that flawless smooth blend. I
Always like to go ahead and edge up the C cup area just like to see where it's at and how dark I want to keep
It but again, we're gonna start with the plate completely open no guards on there
Set up a pretty good guideline, you know, that's about an inch
Of a guideline and we're gonna go with our one guard open and we're flicking all the way up into that to guard
So the two was all the way up there. So we're gonna go pushing up, you know, we want to get this transition
All the way up keeping that same motion
Then we're gonna go ahead and close down the clipper or close down the guard one guard same thing
We're just mainly hitting that bottom line. What we're trying to do is just soften it up
We're trying to get a very light so that when you come back with our zero guard
As you can see these
Guards blend really nice with each other and it's just one step less
You know, you just got your zero guard your one guard your two guard
You don't have any half guards or anything like that. So it makes it really really simple to fade
A lot of you guys have trouble with removing that whole guideline. So here it is
As you can see, I have a plate completely closed and I'm moving up
You have to move up moving up about a quarter of an inch
And now we're gonna open up a little bit more and we're gonna go up more
Right now you can see it's pretty much blended you see that a little dark spot right there with I'm hitting right now
I'm using corner and I'm kind of doing a C motion kind of circular motion to really get that out
Now I moved on to the zero guard to make sure that
Because you know, I want to look it up into that guards now, we're just detailing
That's pretty much it as you can see where I'm at right now where the head kind of turns curves
There's a little dark spot, but later on we're gonna come back with our trimmer just to even that out and get a nice
Now try to follow see here. We go. We're just go ahead and use the corner get that nice
Because you know as the head divots it kind of you might have to go with a shorter
Number in order to make it look like it is on the sides
That makes sense because the back of the head is a lot more dense. So
One guard may look a lot shorter on the side, but one guard in the back might look a lot darker
These are the same steps in the back. We're just gonna bring the whole face together and I'll be pretty much it for the faith
If you haven't yet, please make sure that subscribe button it really helps make sure to turn the notification bell
so whenever I drop any tutorials if you're up to date and you could you know, check out the tutorials and go back to the
shop and
Implement what you learned
Alright, now we're starting from the middle moving to the right side. I already hit this side a little bit earlier
But we're starting from the middle going to the right side
The middle back to the left side
As you can see
It's light as you get closer to the vertical bars
But I didn't push it back
If you go ahead and tap that line you can start to create a line
And as you can see the line is being created
I don't have to push it back
Go ahead and enhance the cut later just to make it pop a little bit more
But as you can see no pushbacks here, we're just gonna keep it as natural as possible
We're gonna get it a good line that's sharp
Especially kids hair, they don't get haircuts that often to get the haircuts probably once a month
Two months. So you want this haircut to last as long as possible. So you don't want to push it back
See as you can see it gets light in that vertical bar area and I could have kept pushing them, right?
But I stopped right there
And then we're gonna hit that vertical bar and you're gonna see it's gonna pop right when you hit it
And create a push it back
This hair there won't be too much grow back as
He goes on so right here
You don't want to cut any length off the top because you don't want to slick it back have it disconnected
So I went ahead and wet it a little bit
Just so it could start pushing back because it's hair wanted to push forward before I styled it after I got all wet
I used my comb to separate the long hair from the short hair to see what was unnecessary
Why could have cut off? So right now I'm just taking that to guard again, and I'm
Chopping off any excess hair that was there
Now we've got some gel
Plastic Jonas there. So he has a nice slick back look that wet look to his hair. Yeah, he's a kid
He's got thick hair. So it looks nice
After that, we're gonna go use my favorite styling comb, which is a fishtail comb gives that separation
It's got the fine side so you could really even up the haircut
Or even up the hair and then you got the white to you three to get that
Texture separation in this hair and then we're gonna do our final details with the razor
All right, after all those little details that we just did that's pretty much gonna be the cut YouTube
Hope you guys enjoy that video. This is a kid's cut with the design and it's an undercut
So the top super long and the sides are short. We're applying some talc powder here
So it removes all the hair from his neck. So he's not itchy when he goes home, but that's pretty much it YouTube
Hope you guys enjoyed that video
Make sure to smash the like button subscribe to the channel turn off the notification bell
I hope you guys learn some new we got weekly content that we're gonna be dropping. So make sure that you're up-to-date
Don't leave any feedback down below. But thank you guys so much. I appreciate you guys 50k is the next goal
Catch you guys on the next one, right? I'm out
