How to Eliminate Thickness Planer Snipe (Without Modifying Your Planer)

Howdy folks! I'm Mark Reuten from Nomad Boat Building.

In this episode of the Poulsbo Boat Project, I'm tackling one of the most common frustrations in woodworking: thickness planer snipe. I explain why snipe happens, why it isn't always practical to eliminate with elaborate machine setups, and several simple shop techniques I use to prevent it when milling boat parts.

We'll cover lifting the stock during the cut, feeding boards diagonally, using sacrificial battens, and building a simple planer sled for short or thin workpieces. These are practical methods that work well in a real boat shop without requiring expensive modifications to your planer.

If you're building boats, woodworking in a small shop, or simply trying to get cleaner results from your thickness planer, I hope you'll find a few useful ideas here.

If you'd like to help support these videos, consider joining me on Patreon:
Join me on Patreon
https://www.patreon.com/nomadboatbuilding

Website
https://nomadboatbuilding.com/

Chapters

00:00 Why thickness planer snipe happens
00:48 Why extension tables aren't always practical
01:32 Planning around snipe with extra material
02:17 Technique 1: Lift the board during the cut
02:55 Technique 2: Feed the board diagonally
03:30 Technique 3: Sacrificial battens
04:47 Technique 4: A simple planer sled
05:57 Final thoughts


#BoatBuilding
#Woodworking
#ThicknessPlaner
#WoodworkingTips
#NomadBoatBuilding
#PoulsboBoat
#PlanerSnipe
#WorkshopTips