Repairing This Little Damaged Swiss REUGE Piano Music Box...

Amateur Repair Time
257 followers
569 Video Views·Jul 12, 2026
Check out our Patreon page, for all of our channels. Contains outakes, concise arcade repair tips, bloopers, repair FAILS, Audio youtube wouldn't allow us to upload, and much more!
https://patreon.com/JoesClassicVideoGames
------------------------------------------------------------------------------------
Ladies and gentlemen, welcome back to Amateur Repair Time.
Look at this little thing. So I was at the flea market, which is how many of my journeys,
my adventures start. I was at the flea market and I was walking around and a guy had this
sitting on his table. It's about, let's measure it. Shall we measure it? It is eight inches wide
or so. We're upside down. It's about five and five eighths inches tall, I think. And it's about,
oh, we were right the first time, uh, almost three and three and a half inches deep. Probably
a little more than three and a half because of these. And I was sitting on his table
amongst the other junk and it's all beat up and obviously a dog or something, maybe a human
has been chewing on it. Um, it's a little damaged. The little pieces that go over here
are missing from this side. Um, and I noticed as I was walking by, well, that's kind of cool.
And I noticed as I was walking by, there are two music boxes inside of it. So I thought,
well, that's kind of cool. And you know, those little music boxes you can actually use in other
things. Um, I don't know if they're called music boxes or whatever. Uh, they play a little melodies.
So if you look on the back, it says the entertainer and this one, I don't know what
it is. A bit of a mystery. And it says Swiss music box made in Switzerland, 3 9 1 0 8 0.
And I thought, well, that's kind of cool. So these little music box things in here,
you can actually put in other things. So they're, they're in a lot of different things, but
I picked it up and I thought, huh, I think I might get that. And I asked the guy, Hey,
Hey, how much for this? And the guy came walking over and he's like,
how about $3? Okay. Now it works. I gave you got $3 for, um, this little piano thing,
I guess it's just a piece of paper. So it's just a cheap little music box. I've never seen one
quite like this. And so as I was walking away, I was showing it to Donnie and he was like, Hey,
look, these pedals move. I wonder if those are meant to turn on the music box. It might be,
I don't know. Um, but they're both wound up tight as a drum. Can't wind them anymore.
So they are stuck. So we're going to see if we can fix it. What do you think? And then I might
even do some cosmetic cosmetic stuff to it if I can. And hopefully we can fix it. And then we can
put it on the wall over there. It says reuge. What's it say? Rouge. R E U G E Swiss musical
movement. All right. So, uh, we got to get in there and mess with it. Both of these come off.
You can, you know, if you just go backwards, they pop off, but, um, I think I might be able to take
the whole thing apart. It looks like the screws have already been removed from it. So maybe they've
been in there messing it up to begin with. So let me see if I can get it apart and, um, we'll see
what's inside. Well, it popped right apart and Donnie appears to be right. There's some kind of
mechanism to make them start. Of course it's broke. Um, and so if you push down on it, I guess
this would pick up. There's also something, you know, it's stuck there, not working the way it's
supposed to. What song is that? Um, I got to get it off of my thing here because it's interfering
with the, um, knob on the back. Well, I never thought that, you know, Donnie was right, obviously,
but I never thought, um, that, that it was simply in the off position. It says 501. So apparently
it's designed for as long as you hold down the little foot pedal, the music stays on. That's
pretty cool. Okay. And I can see now what the problem is with this. The screw came loose.
So I think it, on that one, I have to hold it up. So apparently it's not enough to like
release the pressure from it. You actually have to hold it up. So let's see if this one will work.
Oh no, it needs to come down on this one. 5621. Beautiful. Okay. So, um,
so the spring should pull it up. Yeah. So when it's up, it's not playing. Damn it.
When it's up, it's not playing. So this needs to be attached over here so that whenever we pick up
with the little lever, it pulls it down enough to start it. Okay. Oh, you just have to do it once.
Okay, cool. There's a lever. There's a spot that catches it, I guess. Yep. There's a little
indention that it falls in. Wow. What a cool little design. Now I've got, like I said,
other music boxes, but I don't have any that are made by this company. I'm sure these were very
common though. Cool. Okay. Well, so it should be as easy as attaching this back where it goes
and then fixing the end of this and then situating it in there. So in such a way that it,
you know, whenever you press them, they go up and then back down.
So the spring should pull them back into position and they both seem to be working just fine.
I don't know what that one song is though. Let's see if we can figure that out.
Okay. So I just Googled Rouge. I can't even attempt German. I guess that's German.
And it says Kaiserweiser number 501. So I'm going to see if I can figure out what Kaiserweiser is
and maybe we can compare what that melody sounds like to that little box to see if that's what it
is. It's the Emperor Waltz from Johann Strauss. Kaiserweiser.
Let me see if I can find the exact same melody. Okay. So this is why I love stuff like this. This
is, like I said, it's just some throwaway thing at the flea market. They would have threw it in
the trash if I didn't buy it. It's beat up and everything, but it meant something to somebody.
You know, I do listen to some classical music, but I'm not familiar with most of it. And of course,
I know who Strauss is, but I don't know much about him and I don't know all of his music.
So let's go back and watch that video and listen to that melody one more time,
and then I'll play you the part from the actual symphony or the actual opus. Okay. Beautiful,
right? So somebody bought that for their home, and this is how it was meant to be heard.
So
that's just absolutely freaking gorgeous. I mean beautiful, beautiful. So we got to fix
this thing so that it works right. Okay. So on this side, the screw went right back in
its original hole. It just, it had been ripped out. And the reason that I was having trouble
with the pedals before wasn't that there's anything wrong with them. They reset each time.
It was that the way it was jammed in here, it must've been on top of them or it was in the
wrong spot. Remember the back was off. So somebody had taken that apart and then put it back together
and I guess couldn't figure it out. And what makes them reset is just simply that the piece
wood on the back is longer than the piece of wood on the front. So just weight makes it reset.
And they're held in place by a, literally a nail that's been driven through that piece of wood
through them. So, you know, obviously very cheaply built, but still pretty cool. I really like it.
All right. And I was able to get a very clean glue repair of the little piece that had broken
off of the end of that one. I think we're going to be pretty good. You know, you can adjust the
length of these by bending them or lengthening them. So I think everything's going to be cool.
I don't think you can adjust the length of those very easily or like the height of them. So we
basically want those to just be beneath the levers. And then if they lift up just a little bit, but I
mean, there is actually a lot of play in it. So, I mean, it will lift. I mean, that's half an inch.
So there's plenty of room. There's plenty of room for lift. So I guess it just depends on
how far they go back to, are they going to hit this? I don't think they do. All right. So it
looks like somebody else already designed it. All I had to do was put it back how it was.
So we'll wait for the glue to dry and then we'll clean it up a little bit and we'll try
to fit it back together. I went ahead and oiled all the movable pivots and stuff that I could
find on there. So hopefully they will work well for us. Okay. So I glued that back and I put the
back back on it. Now the pedal doesn't have much play because I think it hits that little board
that's in the back at the bottom. You can't push down on it really far. So it would be really easy
for someone to break this, I think, if they just kept pushing on it. You can see the little lever
in there. I think I might be wound down. Let me wind it up. So you can see the pedal only goes
about halfway down. So if you just went crazy on it, you could break it. Let's wind up the other
one. I haven't wound them yet. We've played them a bunch of times, right? Okay. So now this one
works backwards. Whenever you press the pedal down, it's actually going to make it go down.
Maybe I didn't wind it enough. Maybe. No, it's fine. I'm not going far enough. Maybe it's not
getting all the way out of there. It looks like it is, doesn't it? Let's take the back door back
on. All right. I took that apart. It looked a little, it looked fine. So I just gave it some
more oil. I never put any oil in the spring and I pushed the cylinder a little bit and it seemed
to make it go. So let's see if we can start her again. Now this box makes a little clicking noise.
I'm not sure what that is, but that's not quite right. So that side works good and both at the
same time. Now these little music boxes, they, you know, of course they make tons of different
melodies and it's as simple as just unscrewing the old one and screwing a new one in. So if
you wanted, you could swap it with a different one pretty simply. Just buy it online. And I
think they're like, I mean, you got to worry about shipping now, you know, shipping is eight bucks
at least on anything, but the actual little box you can pick up for five or six bucks. So if you
buy like a whole bunch of them, there'd be five or $6 a piece, but I've only got one or two things
that actually take them. And I think this is the only thing that takes this brand. Okay. So I'm
going to screw the back door on and I want to see if I can make these two little missing pieces
out of something. I don't know. I don't know if I got anything that same thickness, but there,
there's not much to them. I mean, it's just a little, it's a weird thickness though. That's
probably, well, let's just guess at it. That's about a quarter inch, something like that.
It's made in Switzerland. So it's something, something millimeter ish. That's going to be
like a 48 centimeters, I think something, something. Okay. So I looked around, I didn't
have a good piece of wood. So I went and bought one. Um, I think this is about the same size.
Yeah, it looks like it. Uh, this was at Lowe's. I went heavy. So it's poplar and it was $1.89.
So I'm in this one deep. I mean, I've done spent probably five cents worth of oil on this thing
so far. So if I can trace that out, maybe I think what I'll do is maybe cut it to length first.
Um, and then it kind of looks like that profile is that, so I don't know if I can do that all
at once. It's going to be a little hard to cut out such a small piece. I think all I've got here to
do this with is a jigsaw. I need to get like a little coping saw, a little hand coping saw or
something where I can do stuff like this, but I'm going to mark it and then cut this to the correct
length. And then I should be able to slide it in there and trace it or come close to tracing it.
And, um, there ought to be enough room to trace this too. And maybe I'll figure it out some way
or another. Um, we'll see, but you know, obviously the thing's not going to look new whenever I get
it done, but I want it to look a little more appropriate. And then I might be able to put
like some wood putty on this where the, I'm going to assume that was a dog, but it could have been
a kid. It could have been an adult. And then we've got a problem here. I don't know if wood
putty will fix that. I'll see what I can do. I got that. I got to remake those two pieces.
Got some work here. And then this, I might have to put like a little paint on or something out
and we'll see what we can do. My plan is coming together perfectly. Look at that. I don't know
if I can cut that with a jigsaw though. I'm going to try. We'll see. I guess if I do a bunch of,
you know, those numbers, it might work. Okay. So I'm going to draw that one here and then I'm
going to try to turn it around and draw that on the other side so that I can cut it out first.
Since it's so small, I'm gonna have a problem holding it and then trying to cut it with a
jigsaw. That's the two pieces I need. That's the bottom support. That's the little top piece.
We'll see if I can make that happen. Okay. So I went to the store. I didn't have a coping saw
and I thought that might be a good choice for it. I actually have a, I've always called them
a skill saw, but I guess it's a scroll saw, an electric one, but it's in my, it's in my shop.
It's not here. So I went to the store and got a hand coping saw. That thing was so small too. I
figured it'd be easier to do it by hand. And this is what I came up with. They're just test fitted
on there. Not perfect, but you know, a nice little, the wood is slightly thicker. I sanded it
down a little bit, but I couldn't get it any thinner. I guess I could have. I kept at it,
but I look, this thing ain't worth too much trouble. I take it back. I take it back. Don't
worry about it. And then this piece, I cut the little thing in there. It's not exact. I sanded
it down a little bit, trying to make it look a little more like it, but it's, it's close enough.
This thing I don't think was built to exacting specifications. So I think that'll be good
enough. So I'm going to glue those in and I'm going to see if I can just put a little bit of
this on those chewed up corners, just to make it look a little better. I don't know if I can square
it off very well, but we'll see. And that's the next step. All right. So the glue has dried.
I think that'll work. The, I got to shape this up a little bit, maybe with some sandpaper or
file, shape that up a little bit, and then maybe shape this up a little bit.
And then maybe we're ready to try to put some kind of stain on that part.
I might be able to use that lacquer toner that I've been messing with,
if I don't make a big mess on the rest of it. And I don't know, maybe some,
maybe some Howard's will, is it Howard's? Whatever it is, will restore a finish. Howard's
restore finish. Maybe it will clean up some of these worn areas. Okay. So this is what I came
up with. It's not perfect, but it looks pretty good. If you compare this side to that side,
what do you think? I got a little run in it. It looks like over there,
but I think a lot of people wouldn't know that that had been replaced.
This side, I tried to sand that back down because I got a little bit too dark. Basically,
I sprayed it. That looks kind of light, but if you look at the other side, it looks kind of light
too. But it looks pretty good, I think. You can see a little bit of the tone there. So I know a
lot of you think I'm crazy, but there is actually a method to my madness. So I have my Atwater Kent
radio that I've been working on. And the last thing that needs done is I need to refinish the
top of the cabinet. So I need to kind of match the tone of the rest of the cabinet,
which is the top of the cabinet. So I bought a bunch of lacquer toner. So this is clear coat
that has a tone in it, that has stain in it. I tried staining those two little pieces and it
you can't get a nice dark color with just stain. It just doesn't work like that. You can if it's
like a really nice wood. I mean, it can be done, but to match an existing color is very hard to do.
That's not even the same type of wood as this is. So everything just comes out a little different.
So this lacquer toner works great. It looks like that's how they did a lot of the older stuff
because it's cheaper and it's quicker. So they probably didn't stain all these little cheap
parts on the Swiss clock or the switch music box. They probably sprayed it with a lacquer toner,
just like they used to do all the old radios. So the old radios were done the same way. Like that
was not stained to look like that. That is sprayed to look like that. They had the wood and finish
that's nice quality wood, obviously in veneer, but whenever they went to finish it and once they had
the cabinet done, they sprayed toner on it to give it that nice dark color. So anyway, so I'm
experimenting with that a little bit. So that's why if you look here, I didn't tape it off all
that great. I taped off the keyboard. That was it. If you see that, that's like the other coloring
from when I was darkening this up, it was hitting that and darkening it up too.
You can sand that back off, but I just didn't. And then on here, I got an actual run there and
so it looks messed up. But yeah, in general, like that's a new piece. That and that are very similar.
I sprayed a little bit of, there's two different types. There's ultra classic toner, which is
basically clear. So it's a transparent. And then there's tone classic toner, which is opaque. So I
tried a little bit of the opaque too, just for giggles. And that's what gave it this run where
it doesn't quite look right, but you know, I'm learning. So once I got that where it looked
pretty good, I took the tape off of the keyboard and then I took clear lacquer with no tone in it
and just cleared the whole thing to give it a nice shine. It brought it all together pretty good.
I think a lot of people, because this thing is cheaply made, you know, it's not supposed to
look perfect. There's all kinds of little flaws on it. Like all of this, I didn't do any of that.
That's just how it was originally. And I didn't, I didn't even hit that with any of the toner.
And see how it's lighter on the right there than it is there. And it's lighter there.
These things are not perfect. Obviously this is just to give you a, you know, it looks cool
and it looks cool the way we finished it. I didn't touch up the keyboard. I just decided
it didn't matter. You know, it doesn't have to be perfect. And whenever I sprayed the clear on it,
I didn't tape anything off. I didn't even tape the window off. I just sprayed right over it.
On the pinball machines, on the back glasses, a lot of times we have to clear coat the back glasses
because they're flaking off. And whenever I do that, I don't tape off the score reels,
the windows for the score reels. I just spray right over it. And if the last thing you spray
is that, it comes out with a nice even sheen and it's usually clear. No problems. The only thing
with this one was I didn't clean the front of it before I cleared it. So it's a little cloudy
because of that. I just wasn't thinking about it. But with that said, I think it all looks
pretty good. Now let's see if she still works. So this is the Emperor's Waltz. What's it called?
Waltz in Fuhrer. Beautiful. And it's right here at the 4th of July. We're all in our patriotic
mood. So we'll finish it with Scott Joplin, who I believe was an American composer,
and the famous The Entertainer. Beautiful, beautiful. And I found some screws to put in
the back to hold it back together. I wish I had this sticker. That's the one that would have said
Waltz in Fuhrer, which is Johann Strauss, I believe, right? We looked it up earlier.
And I didn't clear the back. I didn't do anything to the back. And I didn't do anything to the
bottom. So that is very nice and presentable, I think. And I'm going to put it on my shelf
and keep it forever. Hope you enjoyed the video. We will see you next time.
