Thanks to BRUNT for sponsoring this video! Get $10 off your first purchase at https://brunt.yt.link/UaGiSoB using code BPO3HOMESTEAD.
Our shop is 40' x 60' with the electrical panel mounted in one corner. That makes electrical runs on the opposite side of the shop a bit challenging and expensive. The obvious solution to putting perimeter lights outside is to go solar. So we did.
PPO3 is supported by Timber King sawmills. For more information on my 1220 CRZ mill,
or one of many Foley hydraulic options, go to TimberKing.com.
7-11. 7-11 a.m. and Jamie's already out here, so let's go see what she's up to.
Last night I turned the compost. I just used the grapple on the tractor and just grabbed this side,
dropped it right there, grabbed this side, dropped it right there, and just moved it from one side
to the other. It's looking pretty good. Looking pretty good. Some pretty dark stuff in here.
The dogs respect the barrier. Good doggies. The loofahs are starting to climb. This one
here on the edge is going all the way up to here. It's about to make the turn and go back down.
That one right there is actually doing the same thing. Well, heck, they all are. Well, four of
them. Two on each side is about to make the turn. These things are pretty cool. They got these
little wispy grabby finger tentacle things, and this one's just trying to find something to grab
a hold of. Maybe I'll help it. When they do, look how much they twist up and go kind of crazy.
The hippos are doing hippo things. Cucumber. So, hold on. I'll pick this little dude up.
There you go. Feast on that cucumber. I'm kind of proud of that compost. It looks pretty dang good.
It was steaming. Not this past time I turned it over, but the last time I turned it over,
it was steaming. We'll have to go put a thermometer in that one we did yesterday.
Yeah, I'll check back in a little bit. I'm going to get some coffee and get started on my
list. Oi, Gigantor. I can't see out of this thing. While I'm out here real quick,
might as well check in on some stuff. This is catnip. Look at all this catnip. A lot of catnip.
We've got an 18-year-old cat inside, and we've already cut off a bunch of this and gave it to
her and calmed her down. Pretty cool stuff. Some southern dewberries, if I'm not mistaken. Those
four clocks over there have blown. Let me check that out in a second. Or maybe, yeah, both of
these are southern dewberries. Trying to guess all this stuff without her expertise. This is a
watermelon plant, so this is hanging off the side. Got one shoot going this way, one going that way,
and this is a primson rose, and it opens up in the morning and closes before sunset. So around
four o'clock at night, this thing will start to close up, which is pretty interesting. Next morning,
everything is open again. Remember, this was just a little itty-bitty plant that Jamie put over here
that she transplanted from her last garden. Little itty-bitty plant.
And there's beetles all over it. Mating beetles right there. Mating beetles.
Mating beetles. That's crazy. Single beetle. And beetles, beetles, beetles. And then with the
beetles is some other bugs crawling over it. This one, I don't know if that's even showing up on
camera, but that's got beetles, and then some other bug that's up there. It's like a walking
something or other. Like a miniature walking stick. The diversity of bugs all over these
things is pretty interesting. Anyway, this plant's massive. Massive. These are the snap dragons.
They bloomed and went away already. Pretty cool. I forget what these are. I forget what those are.
Are those the zinnias? I don't know. And then these, Jamie's already harvesting the seeds
off of these. These have already gone through their cycle, and she's just been pulling the
seeds off and sprinkling them back in here. So they'll come back. This is the Prince William that has
completely shed its flowers and then came back for a second bloom, and now it's starting to die
back from the second bloom. We harvested a bunch of seeds from this one. I'm not sure what this is.
Not sure what that is. Pretty flower though. And then these are the four o'clocks, and we've got
all kinds of different colors there. Mosquito, leave me alone. These were just exploding with the
blooms yesterday evening. I don't know if they close up at all, but they don't look as explosive
as they did yesterday. But four o'clocks and white and yellow, pink, more pink, and then over here
is another four o'clock in a more vibrant pink, almost magenta. Pretty flower. And then
I think that's a weed. I think some of that's a weed. And then these have already died back as well.
My tasks for today are going to start with getting some lights up. I've been wanting to put some
solar-powered lights on the side of the shop for a while. I've had them for a couple months just
sitting in the box, but out of sight, out of mind I guess. That's not what I want to do today. What I want
to do is work on the CNC machine a little bit more. But we have like five, six days of rain in
the forecast, so I can work on that during the rain. I got to get these lights up before the
rain comes. I'd love to get them up today actually. These are the lights that I have. It's a
solar-powered light. Pull this off. So there's your solar panel on top, and then on the bottom
side you got all those lights. It's remote controlled, and yeah, I don't have to run
electricity to the other side of the shop, which is a win. So this is the bracket that the arm
attaches to. You mount this to the structure, and then it's slotted. So this just slides on
from the side, and that's how it mounts. However, this is kind of small, and I don't really trust
this to mount right to the metal. I feel like there'd be a little bit too much flex in there. So
I picked up a piece of PVC trim board, but what I'm going to do is cut out a section of this board,
mount this to the PVC, and then on the PVC I'll have a wider area to mount this to the actual
shop. The mounting plates, these little black pieces right here, they may have been just fine
enough by themselves, but in order for me to screw onto the metal building, I have to use these bigger
diameter screws, and they have a huge head to them, and they just won't fit on that little plate. So
this PVC intermediate plate seems to be an appropriate solution, I should say.
The green screws are deck screws, so they're exterior rated. Once this thing is say 20 or
14 feet in the air, depending on what side of the building it's on, you're not really going to
notice that. And the blue screws, those are the same screws that the structure is assembled with.
So I think this is going to be an appropriate solution, and I used a square to make sure that
this bottom edge was perpendicular to the side edge. So long as I put this up there with a
level, small level on the side, then the light should be nice and horizontal. That is my parking
brake for the bottom of the ladder. I suppose that should do the job just fine. This ladder will do
the job just fine, but it's kind of annoying that there's a little bit of a twist in it. I left it
up in a tree for too long, and it developed a little bit of a twist. So the left side right
there is touching, and the right side is not. As soon as I get on the ladder, it flattens out,
but it's still kind of annoying. Every time you take a step, it wants to, it feels like it wants
to just rock on that twist. But the left side is hooked underneath one of those, or next to
one of those ribs, so it should be fine. Second thing that's annoying is there's a rib that's
dead center, which that's not annoying for the building, but I have to put the light on either
side so the light won't be perfectly centered. Just don't tell anybody, and I think we should
be fine. You know what I'm saying? All right, before I say anything, can you tell anything?
Can you tell anything? Can you? I don't think you can, because I can't from the ground. Wonderful,
I can't from the ground. Okay, so the white intermediate plate was not mounted vertical.
I had it mounted vertical on two of the left screws all as well, and then I put one of the,
I think it was the top right screw in, and it shifted. And I thought, what in the crap?
I don't know how it shifted. I think there's a piece of metal behind it,
and it pushed into that and kind of tilted it off angle a little bit, so it's nowhere near
vertical. I mean, it's close, but it's not vertical. Thankfully, the bottom side of the
light is kind of, has two little bit angles to it, so you can't really tell from the ground,
which is great. And the angle that it is slightly off on is this way, which means it's shining more
towards the exact center. I don't think it's going to matter, but I know it's crooked,
and by golly, that's annoying. Eh, whatever. Let me briefly jump in and talk about the sponsor of
this video, which is, it's Brunt. I was going to show you their logo, but it's covered in mud.
It's Brunt. Anyway, this is the Bullduck boot from Brunt. You can get this with or without
waterproof, with or without a hard toe. This is without, so it's a soft toe, and it does have the
waterproof. We have a shallow creek on our property, and the water is about that high,
so I can walk through our creek without my feet getting wet, which is nice. The sole is not only
comfortable to walk on, but the sole is slip resistant and heat resistant up to 570, or heat
rated up to 572 degrees Fahrenheit. I like these boots, especially on days where you're in and out
of the mud, and you just want to be in and out of the muddy, heavy boot. I really, really like
these. I also really like the Costello Tech Pants. I've talked about these in the past. I'm totally
sold on these. I got rid of every other pair of my pants, and I only own four pair of pants now,
which is these. Every one of them is these Costello Tech Pants. I really like them.
They're stretchy where they need to be stretchy, so if you've got to get down and be flexible,
they're going to be flexible with you. They have a ripstop technology that I'm sold on,
because all my pants I ruin because I get a little bit of a cut in them,
and then that cut spreads, and there you go. Your pants have now become shorts. Well, these,
if I can find it, I was jumping around in the woods, and I landed in some real thick briars,
which is like one out of five, would not recommend. It changes your whole day outlook,
and I had a briar stick through the pants and tore up my thigh quite a bit,
and I was like, no, my pants are ruined. They've got a rip. Well, these have ripstop technology.
The rip went in two different directions when that happened, and that was seven, eight months
ago, something like that, and they haven't spread any further than the original rip that was in
there. So I could patch these up, but they don't spread, so I just keep wearing them.
Anyway, these are the Costello pants. I like the pants so much that I got rid of all my shorts,
and I purchased four pair of the same thing in the short variety. So these are the Costello
Tech shorts. Same thing as the pants, except they're, well, they're shorter. Captain obvious.
So you can get them in an 11-inch inseam or a 6-inch inseam. They all have this reinforcement
on your pockets, both the right side as well as the left side. So if you clip a bunch of stuff
to your pockets like I do, you're not going to tear that up. And the most handy pocket in the
world, which is your right thigh cell phone pocket. I don't know if it's called a cell phone pocket,
but that's what I use mine for. So on your right thigh, if you're sitting down somewhere and you
got to access your phone, it's way easier to get it out of this pocket than it is a normal pocket
right on your right thigh. I really, really like that. So all of my pants are Costello Tech pants.
All of my shorts are Costello Tech shorts. I really like these. I think you'll like them.
You can check them out from Brunt. And if you want to check them out, I have a coupon code where you
can save a little bit of money on your first purchase. There's a QR code somewhere on the
screen. I'll have a link in the description as well as the coupon code on the screen as well.
Check them out if you're interested. Thank you Brunt for supporting this message.
This message. Thank you Brunt for supporting this video. I got to get back to work.
So I got four of these lights and my thinking is one on the front side above the door,
one symmetrically placed on the backside just because we don't have any light over there,
and the other two I want to distribute on this side because I want to build this park down here.
So we don't need any light on that side. Those lean-to lights are pretty darn bright and they
do a good job shining out into the front. So we don't need any over there. So two on this side
somewhere. Probably closer to those downspouts. This one over here should give us plenty of light
as we pull in and we can drive or walk into the shop like normal. And then that one over there
should concentrate enough of this light on this side over here for when this becomes a park area
then we'll have enough light over here. I'm not worried about pulling it over here to the corner
just because of, you know, typical locations. I think it makes more sense to put them both
right there. Just like the front. That one's not perfectly centered but is what it is. Just a few
minutes ago Jamie came out and looked at the first one and the very first thing she said,
I hate that that center rib is in the way because it's not centered over the door.
She understands. Nothing we can do about it. Anyway, I think these are going to be all right.
The lean-to lights do a good job, like I said, shining that way. A residual amount over here,
but this side is always pretty darn dark. So that one will do a good job over here.
And then once this becomes the the park area, hopefully sooner rather than later, these two
will do a good job on this side. So I just did one rib spacing away from each downspout just for
symmetry. That one's placed perfectly for us to get out of the vehicle and come in at night.
I like that. And this one should fill out over here quite well as well. And then, of course,
the front one over here, like I said, it's a little crooked. Just don't tell nobody.
That one's doing the job just fine. Well, I say doing the job just fine. They're up.
What else do you want them to do? Well, we have to wait till nighttime to see what they
actually do. Now these have timers. We'll go through all that once the sun sets
and we can actually look at these. However, we're supposed to have more sun than we were
than we actually have today. So this is all pretty thick overcast. I'm not sure how well
those will charge. I'm sure they'll get charged up enough to actually demonstrate them tonight or
test them tonight. But we'll see. No, no. All right. Let's check back in with Jamie
in the garden and see what she did this morning with that lovely, lovely compost. Oh, I can see
what she's done already. Look at this. Those cucumbers are probably going to love all that.
But you did the cucumbers and the strawberries. Yes. Don't they look marvelous? They look super
marvelous. Here comes the wind, though. We got storms rolling in, so the microphone's
going to be all crappy. And you did these cucumbers as well. Yeah. So we're hanging
these cucumbers just from a string, kind of keeping them up. It's mostly working. And then
this one, of course, we got the trellis. Will the cucumbers climb or do you have to train them?
I've been helping them out. They're not as good as those loofahs.
Like they do this number, like this guy here. You see him, this runner? Yeah. So I just kind
of zigzag back and forth. Yeah. I don't know if that's how you're supposed to do it,
but that's what I've been doing. I'm trying to get them where they have air. And then these,
yeah, I don't think these strings are going to work much longer. I think we got to do something
because, yeah, you got this one thing, but then these stringers are here and they're not,
they're not up. Yeah, we got to get some of those reusable quick clips or something because the
string is kind of slow and annoying. Yeah. I think we might just use those, um, cattle panels
we got and do like an A-frame. A-frame cattle panel for those next year? Or this year? This
year. Okay. We're going to come in here with a cattle panel. Just like stick it here on the
back or something. I think if I understand correctly, these guys do better on an A-frame
than they do like a tunnel trellis. I think that they go up it better without needing as much
assistance. So they have more, you know, gravity to lean on against it rather than having to fight
their way up it vertically. Yeah, I think so. Okay. What's what? Oh, this is a cucumber. If you could
get me inside, I have orange scissors. They're about this long. They're on my dirt cart. If you
bring them out here, I'll let you cut these off. All right. So like I said, the lean-to lights,
they shine out quite a ways on our west side over here. We can see quite a bit.
My eyes can see more than what the camera's picking up. So there's a stack of lumber over
there. You can see that on the, I can see that on the camera. Over there's the compost. I can see it.
It's probably not showing up on camera. I can see two bunks from the eye over here. I'm not sure if
that second one's showing up on camera. Anyway, the lean-to lights are great and they should be.
That's a tremendous amount of light at nighttime. The solar lights, on the other hand, put out very
little light on one setting and then they get really bright on another setting. Doggies, watch
out. All right. So yeah, it's not really showing up on camera. There's plenty enough light right
there for me to see all the way around the shop walking on its lowest setting. So that's the low
light. And if I get underneath it, the motion sensor will trip and it'll go really bright.
However, my ladder is in the way. So I've been messing with this and my ladder, my ladder is
probably in the way. It'll click on in just a second. When I get around here, yeah, the motion
is being messed up by the ladder. The one on the other side of the shop works just fine with that
sensor. But anyway, if I go to setting three, there we go. Setting three is bright all the time
and it's not like insanely bright, but it is really good improvement from what it was.
So this remote that I'm looking at here has three different settings.
Setting one is it completely off until you motion activate it to a high light.
Setting two is always on dim and the motion sets it up to a bright light. And then setting three,
which is what I'm going to leave this on, it'll blink every time you use the remote.
Setting three is always on and with always on again, the camera, the camera lenses never pick
up really good at low light, but I can see all the way into the tree line way over there
with the naked eye. That is awesome. That is really cool. And then on this side over here,
we got the two and they are already set at a maximum brightness, not maximum brightness,
but bright at all times. I noticed if you go to like the low setting to where it's low at all
times or dim at all times, and then you walk under it and it gets really bright. That brightness is
much brighter than if you keep it on the always on setting. So I think that's probably just to
make it through the whole night, but I can see quite a bit over here and that's fantastic.
I can see all the way to the vehicles. I can see the tree line on that side. I can see,
I can see so much more than what I can see looking at the back of the camera. I like this.
I like this a lot. Add this to the list of stuff I should have done sooner. Same thing with up here.
Now we're getting a lot of light coming from the lean two, but with the lean two lights off and
just this one light on this side over here, I can see again all the way into the tree line.
Man, I wish there was a way that I could really convey how much I can see out here.
All the way around the shop. It only took us, what, a year and a half of living out here to
be able to walk around the shop at all times of the day and night without a flashlight. I like it.
I like it a lot. Yeah, I do like it. I'm gonna leave that ladder there for tonight though.
I'll leave a link to those lights down in the description if anyone wants to check
them out. It's not an affiliate link. It's just where I got them from.
Wondering where I went. I take a rest. I hold my breath. I let it simmer down.
I climb too high in my wonder now. Despite the lights of town.
They said don't go downtown tonight. There's trouble on the rise.
Batman in the shop. Oh, they're bound to take your life. Rambles. I tell you how to do.
Keep your money in your pocket, boy. Can't raise it. You should.
Well, don't go downtown tonight. There's trouble on the rise.
Batman in the shadows is bound to take your mind. Rambles still. I tell you how to do.
Keep your money in your pocket, boy. Can't raise it.
Keep your money in your pocket, son. Can't raise it.