This 1969 Ford F100 Ranger XLT might look classic, but it’s actually a brand new truck from the ground up. With all-new sheet metal, chassis, drivetrain, and interior, this build gave us the opportunity to create a “modern” 1969 exactly the way we wanted.
In this video, we walk you through the entire build. From sourcing a new body to installing a Whipple-supercharged Coyote, custom chassis, and fully updated interior. This project pushed us to reimagine what’s possible when you’re not limited by the original truck.
We’re putting miles on it now and getting close to the finish line, stay tuned as this one comes fully together. Let us know if there's anything else you'd like to know about the build!
This is a 1969 Ford F-100 Ranger XLT package, but it's actually a brand new truck. From sheet metal
to chassis to motor and transmission, there is not one original component that came with the
existing truck. I'm going to walk you through the build start to finish. We'll go from front to back
and we'll show you guys why this is a really special project for us and we hope that you
follow along. Hey guys, this is Spencer with Fat Bender Garage. Thank you for joining me.
Sitting next to me is a beautiful 1969 Ford F-100, the XLT Ranger package. But like I
mentioned in the intro, this actually isn't one at all. It's actually a brand new truck,
including the full sheet metal, cab, bed, full chassis. So I'm going to walk you through from
start to finish kind of what took place, why we have this build, where it's at now,
and how it's all going so far. A little bit of history on the truck. This is a great customer
of ours and we've covered his OBS build before. It's a really big hitter. Basically he wanted
to do three trucks, one for him, two for his sons. This is his personal truck. It's kind of
the big host of the group. So he's really wanted to make sure we went the extra mile on this one.
Of course, the dad's got to have the coolest of everything. Come on. So he got the Whipple,
he got a few other little things. We'll cover that. But he shipped all three trucks to us
from over on the East Coast in the Georgia, Louisiana area. And the plan was build all three.
So the 69 in particular was found in a farm field in Georgia and was in mass shape. But as we got
it and we really jumped into it and kind of evaluated the body in more detail, we realized,
man, this thing's kind of Swiss cheese. Pretty much every panel on that thing had a lot of rust.
If you're familiar, there's a lot of moisture in the cell. Luckily, our friends over at Premier
Street Rod in Lake Havasu, Arizona actually have a solution for when you end up in a pickle like
this. They have a brand new cab, bed, and then some of the supporting components like fenders
to basically rebuild a brand new truck from scratch. It's a new body. So cab, bed, all the
components are all brand new body panels. Of course, they don't always fit exactly right.
That's kind of the idea is there's always some rough in work to do to make sure they're gaffed
correctly because it's a remade unit. The way that they manufacture these isn't quite the exact same
way that Ford did on their original cabs. If you deal with these trucks, a lot of times they come
out where panels are a little bit mismatched. Things don't quite fit right. Ultimately, not all
trucks are built the exact same. Same thing applies here. There's always a little bit of
leeway you have to have. The way I would think about this is this is basically a 2026 1969 F100.
When you do something like that, sky's kind of the limit. You can build this thing exactly how
you want. You have no limitations based on the original truck. To my knowledge, the original
donor truck we were going to use was also a Ranger, and the customer really wanted to keep
the Ranger element of it. So as we rebuilt this thing from scratch, wanted to make sure the badges
were on there, really has that look that we're going for. So anyways, it turned out awesome.
Paint is kind of a fan favorite. I'm sure you guys have seen this before.
This is kind of a signature green for us. It's like our black to green shift color. So the light's
hitting it pretty good right now. You can probably see a little bit of the green coming out of it,
but you roll this thing out in the sun and it really pops. Looks awesome. And we know that
because we just started pulling this thing in and out of the shop in this past week to start
putting test miles on it. I believe it has about 15 miles on it so far. So sheet metal looks great.
What you can't see under here is the Ford emblem that we painted white. You can kind of see it
under the tape a little bit. If you guys are curious, if you weren't really sure, the tape is
there for test miles. If you notice the area that we're taping off, the goal there is that you avoid
rock chips. You don't want to have to redo work unnecessarily. So we would rather over tape and
reduce the risk of any kind of rock chips or anything happening out while doing test miles.
So grill, badges, your headlight bezels, your bumper, all brand new. Those are going to come
from places like Dennis Carpenter, LMC truck. A lot of places like that that sell brand new
components that replace the factory stuff. Again, we had nothing to use. So we basically were going
to build a truck from nothing. We're at a time that you can do this and there are companies
that support this and make it easy for you. So this is an even cooler part in my opinion. Again,
I mentioned this is the big Haas trucks. So of his other two, they just have traditional 5.0
Coyotes in them. But for this one, he had to go the extra mile and put a Whipple supercharger on
it. So that's going to be your Gen 3 Illuminator Coyote, and that's going to have a three liter
Whipple on it. It's the Gen 5 or the Gen 6 Whipple. Kind of the norm for us at this point,
if you followed our build updates, these things make about 750 horse out of the box. That's before
headers, tune, and some of these components. So final numbers to be determined, but somewhere in
the 750 to 800 horse range is probably fair to assume. Engine base, still the works. You got
the fat fender garage ECU box. You have a brand new Optima battery in there. Brand new Willwood
master cylinder and seven inch brake booster. You're going to have a custom cold air intake.
That's a five inch intake, a wizard aluminum radiator. This one is actually one that we're
going to be coming to market with pretty soon. So keep an eye out for this. This is what we're
calling the beast radiator. Don't know what the final marketing name for it will be when it goes
on the website, but it's really cool. It's aluminum radiator, and then it's all of your
built-in reservoirs for your intercooler. So this is where you'll have your coolant. We used to run
kind of a reservoir over to the side on the inner fender. Now it's all just baked into one unit.
Then on the front, you can kind of see you have your heat exchanger, and then you have your AC
condenser behind it. So it is literally one cradle to grave unit that has everything on it,
which is really cool. It's super time-saving. The radiators that we've been using before are
still awesome. They work just the same. This just kind of takes it a step further and puts
everything into one bundle for you. You'll notice this thing is basically at stock ride height,
maybe a little bit lower. That was intentional by the customer. We went with our street chassis.
So it's a custom coilover chassis. Works great. Independent front suspension. It's on control
arms, upper and lower. And then in the rear, you have a four-link with a nine-inch rear axle
from Curry Enterprises. 14-inch Wilwood disc brakes on this thing. Stops on a dime. For us,
this is kind of the norm. So if you followed us, you're pretty familiar. But for any first-time
viewers, this is pretty spec for us, if you will. Another kind of a halo of fat fender that you'll
notice is we have a matte finish on the inside here. We really like to go with a high-gloss or
gloss exterior finish. And then when you get on the inside of the cab, the engine bay, we would
like to do a matte because you're kind of creating subtle contrast without introducing a secondary
color. So there's less risk that you're going to put this all together and something doesn't look
right. Of course, there are builds we've done where we'll just go with a straight-up black
inner fender engine bay. But if we have the opportunity, I mean, it's really nice to add a
little bit of contrast, but you don't always want to change or add a color when you don't need to.
So engine bay-wise, I think I've covered things pretty well. Stock hood hinges. So it's crazy to
see that a whippled Coyote and a 10-speed automatic transmission can fit within the
factory sheet metal with zero modifications. We've talked about that before, but it really
is impressive to see. Think about how much is going on in this engine bay here. There's so
many things where the original truck, you might've had an inline six, you might've had like a 360.
It's just going to be a small block motor and really not a whole lot going out. Booster next
to it maybe. So to cram as much as we've crammed in here, make it functional, make it serviceable,
and make it actually look pretty good, I think it's definitely something to be said just in itself.
So that part's pretty cool. All right, so wheels. So these are Schott's Mark V Concave V wheels.
These things are sick. Schott's hooked it up. They make awesome wheels. And this is the truck to ball
out for wheels like this. Like of the three, I would say this one probably has the most pizzazz
to it, if I were to kind of use that word. His other one's a white and green two-tone,
the boxwood green, Wimbledon white. It's a little bit more traditional. This one's got some flair.
This one looks nice. So to me, might as well ball out, get the Schott's wheels, get what looks the
best. So those are 20 by eight and a half in the fronts. And then we have 20 by 10s in the rear.
Tires, you got Michelin Pilot Sports. So you're going to have a 245 in the front and a 295 in
the rear. So he's got some meat. As you can see, good amount of sidewall here, but it all fits
great. And yeah, the stance looks awesome. Because of the tires being different sizes,
it does add a little bit of rake in the rear, which is kind of fun because it kind of looks a
little bit more period correct because these trucks came with a lot of rake. So because of
the difference in tire size front rear, the, just a slightly bit more than the front is,
which looks cool. I think, I think the look of this all looks awesome. So on all the trim,
we really wanted to go for a brush machined, but polished look. So everything is either polished
or it was polished. And then we put a machine finish over it to just give it a little bit more,
a little bit more flares. Brand new Ranger badges. Of course, you got to have the red,
white, blue on there. Looks sick. So again, if we're building this thing from nothing,
pick the trim level. Like you get to pick, like you shouldn't just do a base model F100, which
in all its fairness, those are cool in their own regard. But like, again, where the sky was kind
of the limit there. So why not get it your way? So we went with the Ranger, the Ranger XLT package
on this truck. So going into the interior, there's some stuff we haven't done yet, but
interior looks awesome. This is apex leather. This is their upcoming infinity line. We've used
their infinity line on a lot of trucks. It's a heavy hitter for us. So keep an eye out for that
as we, as they come up with those colors. So you'll notice it's not quite put together yet.
We're still in that kind of getting things buttoned up look, but the wood bed that we're
going to do, which I'll get to in a second, will match the darker of the two brown colors.
Just some, some nice pop here, nice two-tone brown. And then we put the burl wood in there
because a lot of your Ranger XLT style trucks had that burl Walnut. So we wanted to replicate
that where we could. We did sound deadening membrane from SoundShield, make a great product.
We did jute pad. Then we did your apex square weave carpet. You know, matter of fact, don't,
don't take my word for it. Let's pop the door on this thing and look at it. Membrane, jute pad,
then your apex ultra square weave carpet. I believe that is their, their ultra dark gray color
floor mats in there. And then in the interior fat fender garage bench sheet, this is our tailor
made interior kit. So if you wanted to find, if you wanted to order an interior, either just like
this or you wanted an interior similar to this, this is our tailor made kit. This is a two-tone
interior. That's what we offer in that package. If you just wanted a one-tone interior, we have
signature kits, which is just the exact same thing. You just have a little bit less options
to pick from. So if you're simple, you don't want to overthink it, go signature. If you want a
little bit more custom, more flair, go tailor made. So this is a tailor made kit. So yeah,
it looks awesome. So it's a full foam seat. There's no springs in there. It's all brand new.
We had the bolstering in there for the most part, because it's very rare for long travel.
You're going to have somebody in the third seat. It'll happen. And in the event that it does,
you have that center section for a person. We also have a flip down armrest in there
that should have some nice little armrests. It's got some built-in cup holders. So if he's got
drinks, he can use it. Otherwise they're not just always in his space. Anyways, the interior team
killed it. So it's got the full FFG audio kit in there. That's also kind of a new thing for us.
We've been selling, which is nice. So it'll come with six and a half inch speakers. Those will go
in the kick panels. Co-axial, they have built-in tweeters. They're really nice. And we got as
shallow of a depth as we could, but we don't really like the full shallow ones if we can avoid them
just for overall sound quality and running power to them. You don't want them to short or anything
like that. So there's a place for those for sure. We just don't use them often. In our kick panels,
we have the, I believe they're the Morrell speakers. We're going to have two 10 inch subs
behind the bench seat and a custom sub box. This thing's going to bump. It's going to sound great.
We have the retro sound radio in there. So it's got more of a classical look to it, but
it's fully functional Bluetooth radio, the whole nine. And then below it is going to be the AC
controls. So that's all a Restomod air kit that we make using their components. So if you look
closely at the bezel, we mirrored the bump side line. So basically the body line inside the bezel.
So it matched with the look of the truck. Full AC system, fully modernized cab. He's going to
have all of his AC, heat, cool, everything you'd want out of a modern truck, which is super sweet.
Wood bed is the next phase that we're getting to and kind of the last phase. So we use this
as a protective for when we put miles on it. So the goal of this is to cover all of the essential
components and keep them protected. So we can go put miles on it while we're waiting for wood beds.
So like I said, it'll match the darker of the two Brown colors on the inside of the interior.
And then I'm not a hundred percent on this, but we'll likely have polished or brushed bed strips
in between the wood slats. That would be my assumption. I'm just speculating here. So on
the bedside for you enthusiasts out there, you probably would have picked it up, but measurements
are spec. There's no raised wheel tubs. They're not widened inwards. The bed hasn't been raised.
Like this is a full truck bed. Obviously I can't imagine this guy does a lot of hauling with it or
puts a lot of stuff back there, but like you get a full space worth of bed. You don't have to do
anything other than that. So that's really cool. So yeah, this thing will be going back to Georgia
when we're all done with it back out in the South. And this guy's going to have a really good time
with it. We're just super, super pumped to be a part of it. It's a nice truck and we have no
reason to believe he shouldn't just have a ball with it. So road to a thousand starts now. So next
you'll see on the horizon is wrap up the interior, put everything back together. Wood bed goes in
there. It looks nice and clean and a thousand test miles. This is the final outcome of trying to build
a truck from nothing. And I think it worked out really well. Premier offers the bed and cab.
That's awesome. There might be other stuff on the horizon for more truck, you know, bodies that you
could purchase. And that's all we want is the industry to keep moving forward. The more options,
the better, because that's just more opportunities for somebody that wants to get into this. They
have avenues now. You never want to be limited where you're just forced to do what's available.
So this was cool. We literally got to pick the truck we wanted. We got to add the trim package
that we wanted to it. Like we were able to customize this thing cradle to grave because
we were in control of it. We didn't have to deal with any external variables. We were able to
source everything brand new. This is a brand new truck, but it's awesome because it can also get
registered as a 1969 Ford F-100, which is so sweet. Anyways, yeah, we're having a good time
with this thing and I think we're right to the finish line. So can't think of anything else in
particular. There are probably some things about this truck that I maybe didn't know going into
this. So if you have any questions, we didn't go over, definitely ask us. Otherwise grateful for
the customer, grateful that we have the opportunity to build it. It's fun to see us put this green
color on more stuff because it was a big fan favorite. So now I think we have three, maybe four
trucks. We might even have a 56 F-100 on the horizon. We might paint this color or a similar
one. So it's likely going to be a repeat color, which I mean, can you blame our customers? It
looks fricking sweet. Anyways, thank you so much for joining me. Again, if you had any questions,
if you saw anything in the background of the video you want us to touch on more,
or if you want to know more about the process, you know, we want to educate people as best we
can. We want to give people the information they're seeking. So love to hear your feedback,
but we're going to be out in Pigeon Forge, Tennessee here in the next three weeks. It's
the biggest F-100 show in the country. It's the grand national F-100 show run by our personal
friends, the Carpenters. We're going to have two booths out there, indoor and outdoor. We're going
to have chassis. We're going to have, we're giving away a frame. We're giving away an interior. You
have to go see us out at Pigeon Forge. It's going to be a riot. So anyways, like, comment, subscribe,
follow us on our show socials. We have stuff coming out every single day. This is not the
only build we have in the shop. We have lots of others going on. So yeah, thanks for joining us
and happy to have you.