In this video, we're uncovering ten buried secrets of the 1964 Ford Mustang prototypes that Ford desperately tried to erase. From the Mustang that was almost called the Cougar — complete with cat badges throughout the design to the four-door sedan version Ford refuses to acknowledge, the all-wheel drive system tested on ice decades ahead of its time, and the tail lights borrowed from a completely different car entirely. You'll discover the retractable hardtop that broke down in front of Henry Ford II, the turbine engine that literally melted parking lots, the all-aluminum body Ford melted down into beer cans, the shooting brake prototype America wasn't ready for, and the hand-built V12 supercar so expensive it nearly cancelled the entire Mustang program before a single production car was ever built.
AI Generated·May contain errors
Video Summary
AI Generated
This video examines the secret prototypes and failed experiments behind the 1960s Ford Mustang. It reveals that the final iconic design was the result of scrapping numerous ambitious but impractical ideas, ranging from mid-engine roadsters and turbine engines to advanced automated transmissions and four-wheel steering, all abandoned due to cost, safety, or technical limitations.
What if the car that defined a generation was actually the third version of an idea
that almost got scrapped twice before anyone outside Ford ever saw it?
Welcome to Wheel Anthology where we go past the dealership brochure and into the locked
filing cabinets of automotive history. Today we're cracking open the prototype
vault on the 1960 Ford Mustang. Not the production specs. You already know.
Not the horsepower figures from the commercials. We're talking about 10 extraordinary revelations
from the secret development program that Ford has spent 60 years trying to quietly bury.
Stick with us because by the time we reach number one,
everything you thought you knew about America's most beloved pony car is going to look completely
different if Ford history and classic American performance are your thing.
Hit that like button and subscribe to Wheel Anthology right now.
What comes next is going to earn it. Number 10, the two-seat roads to Ford.
Actually built or start by destroying the origin story you were told.
The Mustang that changed American culture. In 1964 was not Ford's first idea.
It wasn't even their second. The earliest Mustang prototype, developed in 1962,
was a mid-engine, two-seat roadster with a German-built V4 mounted directly behind the
driver's seat. This wasn't a napkin sketch or a design school exercise.
Ford constructed a fully functional vehicle. It displaced 1,500 pounds,
generated 90 horsepower, and was capable of reaching 115 miles per hour.
Racing driver Dan Gurney piloted it at Watkins Glen.
The automotive press was enthusiastic. Ford executives were genuinely excited.
Then the financial team ran the numbers. Building this car at any kind of profit
margin would require a sticker price equivalent to more than $60,000 in today's currency.
For a Ford, the project collapsed overnight. But internal documents that have since surfaced
reveal how close it actually came. The two-seater reached final executive approval
before a single well-placed question ended it permanently. Without that failure, the Mustang
the world fell in love with would never have existed. Number nine, the four-door Mustang
that Ford refuses to acknowledge for it has never formally confirmed this vehicle's existence.
But in late 1963, a four-door Mustang prototype was under active development inside Dearborn.
Not a stretched coupe, a proper fedora. Sedan with an extended wheelbase and a completely revised
roofline, the project carried the internal designation T5B and reached three physical
prototypes before being terminated. The reasoning was straightforward corporate risk management.
Nobody inside Ford was certain the Mustang would sell. The compact performance segment
was uncertain territory. The Corvair was underperforming. The Plymouth Valiant had
failed to ignite the market. Ford's leadership wanted a fallback position, a practical family
configuration built on the same mechanical foundation that could be rushed to market
if the sporty version failed commercially. The four-door prototype grafted Mustang front
and styling onto a substantially different body structure. The result looked like exactly what
it was. Two different vehicles merged under deadline pressure. The car survived in Ford's
possession until 1965 before being quietly eliminated. Photographs remain in Ford's
internal archive. They are uncomfortable to look at, but they exist. Number eight,
the supercharged engine program Ford completely erased while the publicly visible Mustang
prototypes were being fitted with inline six cylinder engines and modest V8s. Ford's engineering
division was conducting an entirely separate and classified performance program. A force-inducted
version of the 260 cubic inch Windsor V8 fitted with a McCulloch centrifugal supercharger,
completely re-engineered internals, a purpose-built camshaft, and forged rotating assembly
components, those performance figures would earn genuine respect today. In 1963, they were in a
category by themselves. So what stopped production? Ford's insurance actuaries reviewed the numbers
and generated projections that made the legal department deeply uncomfortable. A 300 horsepower
vehicle positioned and marketed toward younger buyers represented a liability exposure that no
reasonable calculation could justify. The program was terminated so completely that Ford destroyed
not just the prototype vehicle, but all associated engine development components and manufacturing
specifications. Only a small collection of internal test documents and a single unclear
photograph of the engine installation survived. Ford would not offer a factory supercharged.
Mustang to the public for four more decades. Number seven, the taillights borrowed from the
Mustang. Prototype development cycled through an extraordinary number of rear lighting configurations.
One particular design stands apart from the rest for reasons that have nothing to do with creativity.
A prototype that circulated inside Dearborn throughout mid-1963 was fitted with taillight
assemblies lifted directly from the 1964 Galaxy. Not inspired by, not similar to the identical units
and changed. The explanation was purely financial. The Mustang development program was consuming
resources at an alarming rate. Every unique component required tooling investment. An
accounting team identified the Galaxy units as an available cost reduction. They were still being
manufactured for fleet sales and warehouse inventory was substantial. The prototype were
these oversized chrome housings for three months while Ford's leadership debated the approach.
The conversation ended at a dealer preview. When one franchise owner studied the rear of the car
and asked whether Ford intended to sell an older model as a new one. The resulting laughter was
reportedly not entirely comfortable. By the following morning the Galaxy units had been
removed. The now iconic triple lens taillight configuration was designed and installed within
the following week. Sometimes the clearest path to the right answer runs directly through the wrong
one. Number six, the station wagon that almost wore a Mustang badger stop for a moment. Ford built a
Mustang station wagon prototype in 1963. This is a real thing that happened. The concept originated
with Ford division general manager Lee Iacocca who made the observation that young families required
practical transportation but retained strong preferences for stylish vehicles. The proposition
combined the Mustang's visual identity with genuine cargo utility. The prototype used a
stretched platform with Mustang front end styling grafted onto an extended rear body structure.
The proportions were not completely unreasonable. The long hood provided visual counterbalance to
the expanded rear section. The side profile carried a quality that certain European markets would have
recognized as a shooting brake influence. Focus groups destroyed it efficiently. Younger buyers
said it resembled a performance body kit applied to their parents family vehicle. Older buyers felt
it was performing a youth demographic it hadn't earned. Neither group expressed purchase intent
but the market research generated during this process recorded something valuable.
Strong consumer interest in a Mustang derived utility vehicle just not a traditional wagon
format. That research document spent four decades in a filing cabinet before someone retrieved it
during the early development process for the Mustang marquee. Some ideas simply require the
right era to become relevant. Number five, the secret racing prototypes Ford built before
Launch Wilder. General public was reading enthusiast magazine previews of the upcoming
Mustang. Ford's competition department was operating a completely separate and undisclosed
program. Beginning in August 1963, five purpose-built racing prototypes were constructed.
These were not performance optioned road cars. They were dedicated competition vehicles that
happened to share visual characteristics with the production Mustang. Full roll cage structures,
racing specification suspension with fully adjustable geometry throughout,
lightweight fiberglass body panels, and in the most extreme example, a 427 cubic inch side oil
of V8, the same engine configuration powering NASCAR competition entries. In a vehicle weighing
approximately 2,400 pounds, power output exceeded 450 horsepower. Carroll Shelby personally evaluated
two of these prototypes at Ford's test facility. His assessment was characteristically direct.
The car was attempting to eliminate him, but doing so in a manner he found acceptable.
One prototype sustained damage during a testing incident severe enough that components were
recovered at substantial distance from the vehicle. The driver was uninjured. The program
nearly wasn't. These five vehicles established the engineering foundation upon which every subsequent
high-performance Mustang variant was constructed. Ford has never formally acknowledged their
existence. Number four, the turbine engine experiment that melted parking lots in 1963,
turbine propulsion represented the automotive industry's vision of the near future.
Chrysler had committed to a full consumer turbine program. General Motors was conducting its own
research. Ford determined that competitive positioning required participation and
constructed a turbine-powered Mustang prototype using a modified helicopter-derived power plant
alone misrepresent the turbine experience. Torque delivery was immediate and uninterrupted from zero
through the vehicle's entire speed range, requiring no gear changes because no conventional
transmission existed. At idle, the prototype operated in near silence, a faint high-frequency
tone barely audible above ambient noise. At full throttle, it produced the acoustic signature of
thrust. Because the mechanical relationship was essentially identical, the challenges were
comprehensive. Fuel consumption reached approximately six miles per gallon under
favorable conditions. Exhaust gas temperatures were sufficient to damage asphalt surfaces in
parking situations, requiring heat shielding that added weight and complexity. Throttle response
involved a delay of several seconds between input and vehicle acceleration. The power plant cost
more to produce than an entire production Mustang. One prototype was constructed. It operated for
six months before the program was quietly retired, the engine returned to its original aviation
application, and the vehicle sent to the crusher. The future had arrived approximately 30 years
ahead of the infrastructure required to support it. Number three, the all-aluminum body that Ford.
Melted down weight management was a persistent challenge. Throughout Mustang development,
Ford's objective was sports car performance delivered through economy car mechanical
foundations. The most direct solution was mass reduction. In late 1963, Ford completed a prototype
featuring a full aluminum body structure, not selected panels, but every exterior and structural
component, doors, fenders, roof, floor sections. The complete body assembly, the weight reduction
was 400 pounds compared to the steel production vehicle. Performance improvements were measurable
across every metric. Acceleration, braking distances, cornering capability, and fuel
consumption all showed meaningful gains. The manufacturing process proved viable. Structural
integrity in several areas exceeded the steel equivalent. The engineering case for aluminum
construction was well supported. The best engineering solution and the most financially
practical one are rarely the same car. The cost analysis ended the discussion. The aluminum body
approximately $1,200 to the base retail price in 1964. Terms positioning the Mustang above the
Corvette's price point, the Mustang's entire commercial foundation rested on accessible
pricing. A $5,000 Mustang was not accessible by any reasonable definition of the word.
The prototype was evaluated for six months and then processed for material recovery.
The aluminum was melted and repurposed for beverage container manufacturing. Ford would
not seriously revisit aluminum body engineering for decades, and when they did, the application
was pickup trucks rather than sports. Cars. Number two, the transmission that could learn how you.
Druveford's transmission engineers developed a prototype automatic gearbox for the Mustang
that operated on a principle that contemporary automotive engineers would find immediately
familiar. The unit monitored driving inputs and adjusted its shift behavior to match the driver's
style, holding gears longer under aggressive operation, shifting earlier under relaxed
conditions. Modern vehicles do this as a standard feature. Ford attempted it in 1963. The control
system occupied a volume equivalent to a large piece of luggage and operated on vacuum tube
technology. It monitored throttle position, road speed, and engine vacuum continuously. The
functional results, when achieved, were remarkable. The transmission anticipated requirements
downshifting before grades became apparent to the driver, maintaining gears through corners
without instruction. One evaluation prototype operated in second gear exclusively for an
uninterrupted week following a system malfunction. Vacuum tube components could not sustain the
thermal and vibration environment of automotive operation reliably. System memory cleared with
every ignition cycle. The project was shelved. The Mustang received a conventional automatic
transmission. Ford's engineers had correctly identified an important concept and incorrectly
assumed that available technology could support it. They were right about everything except the
timeline. Which was approximately 40 years too short, Ford built the future in 1963.
They just couldn't make it reliable enough to sell. It number one the four-wheel steering system
Ford, built from scratch, engineered and tested a four-wheel steering system for the Mustang
prototype program in 1963. Using entirely mechanical means a complex arrangement of
linkages and gearing that required no electronic management. Because electronic management of that
sophistication didn't exist. At low speeds, rear-wheel steering operated in the opposite
direction from the fronts, dramatically reducing the turning radius. At elevated speeds, the rear
wheels steered in the same direction as the fronts, enhancing straight-line stability during lane
transitions. The low speed handling was genuinely impressive. Parallel parking required minimal
effort. The prototype's turning circle was extraordinary for a vehicle of its size. High
speed directional changes felt planted and predictable in a way that conventional rear
axle setups couldn't replicate. The mechanical linkage ran exposed beneath the vehicle's floor
structure, vulnerable to road debris contact. System weight exceeded 100 pounds, a failure in
any component of the linkage network could produce. Independent uncontrolled rear-wheel
steering, a scenario that required no further explanation to automotive safety engineers
reviewing it. $1,000 added to the base price for a capability no buyer had requested. Six months of
prototype testing produced the conclusion that the concept was technically sound and commercially
unjustifiable simultaneously. The technology eventually appeared in series production
vehicles from other manufacturers decades later. In 1963, it remained firmly in the category of
engineering that had arrived before its context existed. Which of these 10 forgotten Mustang
prototypes blew your mind the most? Drop it in the comments. We read every single one. If you want
more buried automotive history brought back where it belongs, hit that like button and subscribe to
Wheel Anthology. We are just getting started and what we have coming next will make today look like
a warm-up act. Keep your eyes open and your curiosity running, because the most extraordinary
stories are always the ones that were never supposed to be told. Thanks for watching.