Repairing a broken / torn / damaged window screen is easier than you might think and is typically only $19 or less. Follow along as we walk through patching and/or replacing your screen. #windowscreen#screentear#screenrepair
THANK YOU TO OUR SPONSOR! Need help from a pro with your project? Get $10 off a remote consultation with a pro at https://www.fixer.com/lrn2diy. This video is sponsored by fixer.com because they have an awesome service that we believe in. Head over to their site today to learn more!
TWO FREE AUDIOBOOKS! To get two free audiobooks from Audible, just follow this link: https://goo.gl/QGFC4Q
Chapters In This Video: 00:00 - Intro 00:17 - Patching with a patch kit 01:22 - Replacing the entire screen 02:00 - Spline 02:35 - Other supplies 02:46 - Remove existing spline and screen 03:56 - Sponsor 04:37 - Installing new screen 06:53 - Installing pull tabs 07:38 - Trimming excessCredit: LRN2DIY
Hi there. My name is Nils with LRN2DIY.
And if you've got any sort of a hole or tear or issue with your window screen,
I'm going to show you exactly how you can take care of that.
At first, if you just have a small hole like this,
you can barely see it. So I put a piece of paper behind,
just a teeny little hole like this. You can purchase a little patch.
There's a small patches like this for about $3 or for six or seven,
you can buy a larger patch that is heat adhesive. Now with these,
they have a little hook shape all along the outside and the objective is pretty
simple. Basically you're going to,
if you just need to cover this up and you're not too worried about how it looks,
then you can feed some of the hooks in one side.
Once I get those in one side,
I'm just going to use my fingers from the other side of it,
kind of hook those around one of the lines like so.
And then you can push the other end in and same thing.
You're going to just kind of bend it in the opposite direction to just attach
those hooks on there. And that's pretty much all there is to it with that.
The hole is patched. It doesn't look great.
So if you're just looking for a functional fix, that's a good way to go.
But if you really want to do it right,
I'll show you how to replace the entire thing.
So this is actually really inexpensive to fix.
You can pick up a roll of screen material.
This stuff is anywhere from about $7.50 to $15 or $20 depending on if you get
fiberglass, aluminum, or pet screen. Those are three different types.
If you have pets, you might want to go with a pet screen.
It helps deter the holes that come from scratching. If you have aluminum,
which is the metallic stuff that doesn't bend very much,
then you'll probably want to replace it with aluminum or you can go with
fiberglass, which has a little more give. It's a little bit lighter,
a little bit softer. And that's what I'm going to put on here.
Now a couple of other items that you'll most likely need is the spline itself.
You can see in here, this little piece,
it's a little rubber hose looking thing that's called a spline.
It's typically black and it comes in multiple diameters.
There's a 0.14 or 9 64ths of an inch.
And that's the most common size. That's what I've got right here.
So before you go to the hardware store to purchase some of this,
if you feel the need to do so,
then make sure to take a look at what size you've got. And if possible,
bring some with you so that you can make that perfect comparison.
Now you don't always need to buy new splines.
Sometimes you can reuse the stuff that's in here.
The other thing you're going to need is some sort of a spline roller.
These are about five to $6. They're really inexpensive.
You're also going to need a straight edge blade and then maybe a flathead
screwdriver or a slotted screwdriver to help with the corners.
The first thing we need to do is remove the existing spline.
And I noticed on mine that it looks like it starts and ends right up here.
So I'm going to dig in here and see if I can get that spline to come out.
Now I have a very rigid frame on this door, so it doesn't bend much,
but if yours is something that's bending quite a bit,
it might help to tape it down or to clamp it down to a work surface.
And that'll help the frame stay in place and just make your life a little bit
easier. So you're just going to remove this all the way around.
And typically there'll be in one piece like this little bend around the corners.
Now, once you have the spline released,
then it should be fairly easy to poke out the screen itself.
And again, some of these might be a little more deteriorated or in bad shape
than others. This one's coming out pretty easy.
And on mine, I might have to cut it. Nope. It's mostly already cut.
Um, there we go. I want to keep this, this piece intact in my case.
I'm just gonna do that.
I want to take just a moment to tell you about our sponsor for today's video,
Fixer.com. Now,
if you like me are the kind of person who likes to do DIY projects around the
house,
but sometimes you need the advice of a professional or you just want to check
something with someone who knows their stuff, Fixer.com is exactly that.
With Fixer.com,
you have access to a group of professional tradespeople who really know their
stuff.
You can schedule some time with a pro by heading over to Fixer.com slash learn
to DIY. And by doing so, you'll save $10 off your first consultation.
The first five minutes are free.
So hop on over to Fixer.com slash learn to DIY today to move ahead with
confidence. Now, once you've got your screen out,
that's a great time to clean up your grooves here.
I've got a lot of debris in here, for example.
So I'm going to clean that up real quick and then get ready to put the new
screen in. Now that we've got our work surface ready, next up,
we're going to take some of our screen material.
And this is just extras that I had from a previous job,
but you want to lay it out to where it covers everything and then just get out
some scissors. If it's fiberglass,
you can actually usually cut the aluminum stuff and certainly the pet screen with
scissors as well. Now, once you've got it laid out like this,
if you're able to reuse your spline, go ahead and do so.
I'm just going to put a new spline because I have some.
The different ways you can put this in.
If you've got a regular kind of pizza slicer roller,
then you can just start by putting in the rounded side and then follow it up
with the grooved side of your wheels. And in my case, with this mouse,
you actually insert the spline right in through it like
this, and then you feed it underneath.
So I'm going to pick a corner to start in, start down here.
And I'm going to actually use my screwdriver to sort of push this in to get us
going. There we go.
Should go all the way in and really pucker on that, uh, on that screen,
like you see here. And then once I've got it started,
I'm going to use the wheel to push it in.
And then you let the back wheel on this one ride along and that kind of double
seals it in. It starts to come out like mine just did and just readjust.
But basically you're just riding this one handed along the groove.
It should give you a pretty nice fit here.
And when I get to a corner,
I'm just going to use the screwdriver, continue doing the same thing.
So we'll push this in.
Now, as I do this bottom piece,
if you've got window tabs that are fragile and broken,
these little window tabs are often just brittle. They just snap right off.
So you can buy corner springs and pull tabs and you can actually just put those
in. They go right under the spline.
So I would lay one right here and lay one right here, for example,
and then run the spline right over them.
Those tabs sit in and that allows you to pull the frame of the window out when
you need to. And when you get to the end of your section,
just use your sharp blade and slice off that spline.
And then the screwdriver to put those last pieces in place.
There we go. I've got a nice screen here. Nice and taut.
Now the last thing we have to do is to remove the excess.
And this goes pretty easily.
The idea is you're going to run at a 45 degree angle on the backside or the
outside of your spline. And it's going to go up against the metal groove.
Like so. Keep your hands out of the way.
And then this fiberglass should cut pretty easy.
Even the aluminum should cut okay.
So here's the angle we're shooting for here. Okay.
All right. And with that, the new screen is in place.
It's nice and taut and everything looks good.
Now if there's more to it in your case, for example, if you have a bent frame,
you can actually bend that back into place.
Like I'm doing in this video here,
like you can see by using a straight edge,
pulling it up against it and then replacing that screen.
Oftentimes it's that tension that where the screen got pushed.
And so if you can reframe it and straighten out that frame,
then you're in good shape.
Or you can buy a whole new screen or you can custom cut one yourself with the
kit.
And all you need is a hacksaw and the same tools that you see us using here.
And then the kit comes with everything except for the screen material,
which you would need to purchase separately. And that's it for this project.
Thanks so much for watching and we'll see you next time.