How to fix a loose & rocking toilet...Part 2

VideoJoeKnows
63 followers
32 Video Views·May 2, 2026
http://www.VideoJoeKnows.com How to fix a loose & rocking toilet can be hard...or easy....you choose. I guess you could call plumber & he can fix your loose & rocking toilet, as well as clean your pockets out $$! Hey if "joe" can do it, YOU can do it. Don't pay someone else, to fix your loose & rocking toilet, when you can do it. Just remember, "joe" won't show you anything you can't do! So get your tools ready & "joe" will show you how to fix & repair your loose & rocking toilet. Just what you wanted to do on a Sunday afternoon......huh! Loose & rocking toilet repairs just got easy....how do I know this? Just watch "joe".
http://www.VideoJoeKnows.com
Now here's another thing. If your toilet is rocking, it doesn't have to be
exactly the same way front to back. Yours could be side to side and it could be
moving a lot more than this one. You just follow this and maybe I'll give you some
different ideas on how to fix your toilet, even if it's slightly different
than this one. Okay, so listen up. Now here's another thing that I want to take
into consideration. Because this toilet's rocking, you might think,
is that affecting the wax ring that's under there? Because obviously if I can
push this up and down just slightly, that means maybe my seal where the wax ring
is, is not a hundred percent perfect, right? Well, that could be a concern and
so one of the things I'm going to do is I'm going to flush the toilet. I'm going to
watch around here, make sure there's no water coming around. In fact, I don't
think there will be because, here let me flush it anyways. I've looked before and
you can see there's no visible wetness down here or any sort of mark where
water has come out or anything like that. Okay, so I know the hercule flange and
the wax ring are tight. We're moving up and down at the front right here. You're
not moving. Here's maybe a 32nd or 64th of an inch is moving, which means back
in here you're hardly moving at all. I'm not really concerned about the wax ring.
Even if the wax ring is not fitting a hundred percent, I mean 99.9 percent, you
could get some air or some gases, you know, sewer gases coming back up through
there, coming up through that crack, coming out here. So that's why you need
to make sure that your toilet's caulked. If your toilet's not caulked properly,
you're not going to seal in any of those gases that may leak around your wax ring.
Now, normally your wax ring is going to be tight no matter what, but if your
toilet is wobbling to the left and to the right or front to back, you could
have a concern about that. So one of the things I get done with this, where
I've got the hairline crack, obviously there's a hairline crack from here, goes
all the way around the toilet, at least back to that point. So I'm gonna have to
re-caulk that, mainly to seal in any sort of possible gases. All right, if you're a
bathroom, if you're not smelling anything, chances are you're not going to have
that issue. I'm talking if it's a major thing. I mean, obviously you don't
want to put a band-aid on something that's really, really super
bad. The best thing to do, you know, yours is 50% worse than this and it's
rocking all over the place. You know, at that point you're probably better
off removing the whole toilet, scraping off the wax ring, installing a new wax
ring, putting new toilet bolts on there, redoing everything for a 100% job.
Especially if your toilet is, you know, 15, 20 years old, 30 years old. I mean, this
one's only no more than eight years old and everything looks good and that's why
I'm choosing to do it this way. This toilet is taking forever to fill up and
that's because it's an old water fill valve. The pipe here is already starting
to discolor. It's getting rusty right in here and stuff. Man, somebody needs to
replace that. You know, water fill valves, you know, I got those on my channel too
on how to remove one, how to install one and all that. They don't cost very much
and they fill up way quicker than this old style. Check them out. Here's the
front of that toilet. I'm gonna zoom you in here. Now, that caulking is not that
thick but when I put weight on there, you see how it moves a little bit? I hope
you can see that. It's not a whole lot but it's just really annoying every time
you get up and down off the toilet, you know what I mean? That's why we've got to
fix that. Do you see now why even if I tighten up these bolts way back here,
it's really not gonna affect this front very much. We're not really gonna be
pushing that down very much because this tile right here is lower than this tile.
Okay, there's nothing up here so how are we gonna do that? I've got a couple ideas
to you. Here's what I thought I would do to fix this toilet once and for all.
Okay, because I know this tile is low in the grout or the caulking right
here is pretty thick, I can cut this out with my sheetrock knife. I can put some
shims underneath there. Now, there's nothing from here back at least to
this point. I could put a long, like a wood shim in there, let's say. I
could cut it short and kind of pooch that in there and poke it in just far
enough so I can put some new caulking there. I don't really like to use wood
shims and I know some other plumbers do use those but those get a tendency to
get soggy and then they get squishy, you know, if you get any moisture from the
toilet from the interior side and so I don't usually like to do that. You could
go to the store. A wood shim is tapered from maybe a half an inch or
three-eighths of an inch to nothing, like maybe six inches or eight inches long.
They have little plastic shims like that at the store with little
breaks on there and you can snap those off and you can wedge those in there. I
wish I had some of those with me but I don't and so sometimes you have to do
with what you have and this is what I have. I got some little pieces of sheet
metal. Let me tell you, anytime you do something with sheet metal and
you think, oh I'm not going to use any more, well think twice. So here's a
piece I had and I was gonna throw that away and I thought, you know what, I better
not. I better save it in case I need it someday. Here's my someday. How am I
gonna use this as a shim? See what I can do is I can cut a strip like this and I
was gonna even throw that away but I just happen to have that. Now I can fold
this and make my own little shim out of it. Okay, wouldn't you know, somebody wants
Joe. Before I start fashioning this into a little shim and incidentally, you know,
is this the perfect thing for a shim? Well, I wish, like I said, I had some
plastic shims that I could use for that instead. This is metal and over time it
could rust and I'm only gonna make it maybe a half inch long or whatever. After
I roll this up, I'm gonna kind of roll this up with a pair of pliers and stuff
and I could pooch that in there. It's only gonna stick in so far and could it
rust out years, yeah, maybe 30 years from now. So I'm not, I'm not too concerned
about it. All right, so before I mess with that, I'm just gonna take my sheet
rock knife and I gotta score this and I want to, I want to take this out of there.
Okay, I don't, I don't have to take it all out. I'm just gonna take out, you know,
maybe from here to here. Just be careful with it, you don't want to cut your
fingers or gouge up your floor. Now, I don't have to really score up here, do I?
Because that, there's already a gap there, right? Just have to keep scoring it down
here. Now, I probably could have some gloves on too, you know, protect my knuckles. But, you know,
if I can do this, you can do this. Not that hard. You know, do you really, you really have
to call a plumber for this? You know, you pay a plumber to come out here, who knows how
much he's gonna charge you. He's gonna charge you 95 bucks or more, you know, on
something that you could probably do on your own. I'm not gonna do it. That's why I thought,
since I'm gonna do it, you can probably do it too. Okie dokie, okie dokie. Okay, I can work on that a
little bit more. Now, it moves even further because that, see the caulking after it dried,
it's kind of wedged up under there, right? Okay, I'm gonna clean this up just a little bit more,
be right back.
